© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9203A is a digitaly controlled wideband video preamplifier intended for use in mid range color monitor. All controls and adjustments are digitaly performed thanks to I2C serial bus. Contrast, brightness and DC out...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9201 is a wide band video amplifier intended for high resolution monochrome or color monitors.The BRIGHTNESS and CONTRAST are DC controlled.The brightness loop includes a comparator gated by an internally generate...
Pack:2500 Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9183 is a an adaptive NTSC comb filter with twointernal delay lines, filters, clock control and input clamps.The NTSC M video standard is supported.Two CVBS input signals can be selected by me...
Pack:2500 Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9181 is a an adaptive PAL/NTSC comb filter with two internal delay lines, filters, clock control and input clamps. Video standards PAL B, G, H, D, I, M and N and NTSC M are supported. Two CVB...
Mfg:PHI Pack:1998 Vendor:Other Category:Other
The TDA9178 is a transparent analog video processor with YUV input and output interfaces. It offers three main functions: luminance vector processing, colour vector processing and spectral processing. Beside these thr...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9177 is an I2C-bus controlled sharpnessimprovement IC with additional inputs for 6-bitanalog-to-digital conversion to facilitate additionalparameter measurement (e.g. ambient light control).It should preferably ...
Mfg:PHILIPS Pack:DIP D/C:8 Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9176 is a Luminance Transient Improvement (LTI) IC which is suitable for operation in both 50 and 100 Hz environments. The device can be used in conjunction with both LCD and CRT displays. Th...
Mfg:PHILIPS Pack:2500 Vendor:Other Category:Other
The TDA9171 is a transparent analog video processor with YUV input and output interfaces.The luminance transfer is controlled in a non-linear way by the distribution, in 5 discrete histogram sections, of the luminance va...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA9170 is a transparent analog video processorwith a YUV interface. It offers three main luminanceprocessing functions any combination of which can beselected. The luminance transfer is controlled in a non-linear...
Mfg:PHI Pack:DIP Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9160 is an I 2C-bus controlled, alignment-free PAL/NTSC/SECAM decoder/processor. The device contains horizontal and vertical drive outputs and an east-west correction drive circuit. The TDA91...
Mfg:PHI Pack:DIP-20 D/C:00+ Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9151B is a programmable deflection controller contained in a 20-pin DIP package and constructed usingBIMOS technology. This high performance synchronization and DC deflection processor has be...
Pack:DIP D/C:05+ Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9150B is a programmable deflection controller contained in a 20-pin DIP package and constructed using BIMOS technology. This high performance synchronization and DC deflection processor has ...
Mfg:DIP Pack:. D/C:03+ Vendor:Other Category:Other
The TDA9144 is an I2C-bus controlled, alignment-free PAL/NTSC/SECAM decoder/sync processor with helper demodulator for PALplus signals and blanking facilities for PALplus and EDTV-2 signals. The TDA9144 has been design...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9143 is an I2C-bus controlled, alignment-free PAL/NTSC/SECAM decoder/sync processor with blanking facilities for PALplus and EDTV-2 signals. The TDA9143 has been designed for use with baseband chrominance delay...
Mfg:PHIL D/C:04+ Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9141 is an I2C-bus controlled, alignment-free PAL/NTSC/SECAM decoder/sync processor. The TDA9141 has been designed for use with baseband chrominance delay lines, and has a combined subcarrier...
Mfg:STM Pack:DIP-32 D/C:03+ Vendor:Other Category:Other
The TDA9116 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or multi-frequency c...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9115 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plasticpackage. This IC controls all the functions related to horizontal and vertical deflection in multimode or multi...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9113 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or mul...
Mfg:ST Pack:DIP32 D/C:03+ Vendor:Other Category:Other
DESCRIPTIONThe TDA9112A is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or multi...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9112 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or mult...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9111 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or mul...
Mfg:SEC Pack:DIP-32 D/C:01+ Vendor:Other Category:Other
The TDA9110 is a monolithic integrated circuit assembled in 32-pin shrunk dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimode or multi-frequen...
Vendor:Other Category:Other
The TDA9109SN is a monolithic integrated circuit assembledin 32-pinshrink dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimode or multi-frequ...
Mfg:ST Vendor:Other Category:Other
The TDA9109S is a monolithic integrated circuit assembled in 32-pin shrink dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimode or multi-frequ...
Vendor:Other Category:Other
DESCRIPTION The TDA9109N is a monolithic integrated circuit assembledin 32-pin shrinkdual in lineplasticpackage.This IC controls all the functions related to thehorizontal and vertical deflection in multimode ormulti-fr...
Mfg:STM Pack:DIP-32 D/C:04+ Vendor:Other Category:Other
DESCRIPTION The TDA9109A is a monolithic integrated circuit assembled in a 32-pin shrink dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimode or...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9109/N is a monolithic integrated circuit assembledin 32-pin shrinkdual in lineplasticpackage.This IC controls all the functions related to thehorizontal and vertical deflection in multimode ormulti-f...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9108 is a horizontal deflection processor specially designed for monitor applications. The H-drive output duty cycle, the horizontal frequency and the horizontal position are DC adjustable ; it accepts both POS/NE...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9106A is a monolithic integrated circuit assembled in 42 pins shrunk dual in line plastic package.This IC controls all the functionsrelated to the horizontal and vertical deflection in multimodes or m...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9106 is a monolithic integrated circuit assembled in 42 pins shrunk dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimodes or multi-frequ...
Mfg:STM Pack:DIP-42 D/C:97+ Vendor:Other Category:Other
DESCRIPTION The TDA9105A is a monolithic integrated circuit assembled in a 42 pins shrink dual inline plastic package.This IC control sal lthe functions related to the horizontal and vertical deflection in multimodes o...
Mfg:ST Pack:DIP-42/ Vendor:Other Category:Other
The TDA9105 is a monolithic integrated circuit assembled in a 42 pins shrink dual in line plastic packageThis IC controls all the functions related to the horizontal and vertical deflection in multimodes or multisync m...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9103 is a monolithic integrated circuit assembled in a 42 pins shrunk dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimodes or multisync...
Vendor:Other Category:Other
DESCRIPTION The TDA9102T is a monolithic integrated circuit for horizontal and vertical sync processing in monochrome and color video displays driven by input TTL compatible signals. The TDA9102T is supplied in a 20 pin...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9102F is a monolithic integrated circuit for horizontal and vertical sync processing in monochrome and color video displays driven by input TTL compatible signals. The TDA9102F is supplied in a 20 ...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9102C/T is a monolithic integrated circuit for horizontal and vertical sync processing in monochrome and color video displays driven by input TTL compatible signals. The TDA9102C/T is supplied in a 20...
Vendor:Other Category:Other
The TDA8961 is an Advanced Television Systems Committee (ATSC)-compliant demodulator and FEC decoder for reception of 8-VSB modulated signals forterrestrial and cable applications: · Terrestrial: reception of 8-VSB modul...
Vendor:Other Category:Other
The TDA8960 is an ATSC-compliant demodulator and forward error correction decoder for reception of 8-VSB modulated signals for terrestrial and cable applications: ` Terrestrial: reception of 8-VSB modulated signals via s...
Vendor:Other Category:Other
The TDA8953 is designed as one kind of stereo or mono high-efficiency Class D audio power amplifier device that combines the benefits of Class D efficiency with audiophile sound quality comparable to that associated with...
Vendor:Other Category:Other
The TDA8950 is designed as one kind of high-efficiency Class D audio power amplifier device that is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from ±12.5 V...
Vendor:Other Category:Other
The TDA8948J is designed as one kind of 4-channel audio amplifier device that contains four identical audio power amplifiers. This device can be used in (1)Television; (2)PC speakers; (3)Boom box; (4)Mini and micro audio...
Vendor:Other Category:Other
The TDA8947J has the following features including SE: 1 W to 25 W, BTL: 4 W to 50 W operation possibility (2.1 system);Soft clipping;Standby and mute mode;No on/off switching plops;Low standby current;High supply voltage...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA8946J is a dual-channel audio power amplifier with an output power of 2 *15 W at an 8 load and a 18 V supply. The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/...
Vendor:Other Category:Other
The TDA8946AJ is designed as one kind of dual-channel audio power amplifier device that has an output power of 2 x 15 W at an 8 load and an 18 V supply. This device can be used in (1)Mains fed applications (e.g. TV soun...
Mfg:PHILIPS Pack:ZIP Vendor:Other Category:Other
The TDA8945S is a single-channel audio power amplifier with an output power of 15 W at an 8 load and an 18 V supply. The circuit contains a Bridge Tied Load (BTL) amplifier with an all-NPN output stage and standby/mute...
Vendor:Other Category:Other
The TDA8945 is designed as one kind of single-channel audio power amplifier device that can be used in wide range of applications such as:(1)Mains fed applications (e.g. TV sound); (2)PC audio; (3)Portable audio. Also th...
Mfg:PHILIPS Pack:SIP Vendor:Other Category:Other
The TDA8944J is a dual-channel audio power amplifier with an output power of 2 * 7 W at an 8 load and a 12 V supply. The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/m...
Vendor:Other Category:Other
The TDA8944AJ is a dual-channel audio power amplifier with DC gain control. It has an output power of 2 ´ 7 W at an 8 W load and a 12 V supply. The circuit contains two Bridge-Tied Load (BTL) amplifiers with an all...
Vendor:Other Category:Other
The TDA8943SF is a single-channel audio power amplifier with an output power of 6 W at an 8 load and a 12 V supply. The circuit contains a Bridge Tied Load (BTL)amplifier with an all-NPN output stage and standby/mute ...
Mfg:PHILIPS Pack:DIP-16P D/C:2002 Vendor:Other Category:Other
The TDA8942P is a dual-channel audio power amplifier for an output power of 2 *1.5 at a 16 load and a 9 V supply. The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute...
Vendor:Other Category:Other
The TDA8941P is a single-channel audio power amplifier with an output power of 1.5 W at an 16 load and a 9 V supply. The circuit contains a Bridge Tied Load (BTL) amplifier with an all-NPN output stage and standby/mute ...
Vendor:Other Category:Other
Zero dead time Class-D 7.5 A power comparatorThe TDA8939 is a power comparator designed for use in a high efficiency class-D audio power amplifier system.It contains power switches, drive logic, protection circuitry, bia...
Vendor:Other Category:Other
The TDA8933B is designed as one kind of high-efficiency class-D audio power amplifier device that remains operating with considerable music output power without the need for an external heat sink, even for high supply vo...
Vendor:Other Category:Other
The TDA8933 is a high efficiency class-D amplifier with low power dissipation.The continuous time output power is 2 ´ 10 W in a stereo half bridge application (RL = 8 W) or 1 *20 in a mono full bridge application ...
Vendor:Other Category:Other
The TDA8932BT/N2 is designed as one kind of high-efficiency class-D audio power amplifier device that has two full-differential inputs driving two independent outputs. Also this device can be used in (1)flat panel televi...
Vendor:Other Category:Other
The TDA8932B is a high efficiency class-D amplifier with low power dissipation.The continuous time output power is 2 ´ 15 W in stereo half-bridge application (RL = 4 ) or 1 ´ 30 W in mono full-bridge applicat...
Vendor:Other Category:Other
The TDA8931 is a switching power stage for high efficiency class-D audio power amplifier systems.It contains a Single-Ended (SE) power stage, drive logic, protection control logic, a full differential input comparator an...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA8929T is the controller of a two-chip set for a high efficiency class-D audio power amplifier system. The system is divided into two chips: · TDA8929T; the analog controller chip in a SO24 package · TDA8926J/ST/...
Mfg:PHI Pack:04+ D/C:ZIP/17 Vendor:Other Category:Other
The TDA8928J is a switching power stage for a high efficiency class-D audio power amplifier system.With this power stage a compact 2×10 W self oscillating digital amplifier system can be built, operating with high effici...
Mfg:. Pack:PHILIPS D/C:2003+ Vendor:Other Category:Other
The TDA8927 is the switching power stage of a two-chip set for a high efficiency class-D audio power amplifier system. The system is split into two chips: · TDA8927J/ST/TH; a digital power stage in a DBS17P, RDBS17P or H...
Vendor:Other Category:Other
The TDA8926TH is the switching power stage of a two-chip set for a high efficiency class-D audio power amplifier system.With this chip set a compact 2 ´ 50 W audio amplifier system can be built, operating with high...
Vendor:Other Category:Other
The TDA8926 is the switching power stage of a two-chip set for a high efficiency class-D audio power amplifier system. The system is split into two chips:· TDA8926J: a digital power stage in a DBS17P power package· TDA89...
Mfg:PHILIPS Pack:SSOJ D/C:04+ Vendor:Other Category:Other
The TDA8925 is a switching power stage for a high efficiency class-D audio power amplifier system.With this power stage a compact 2 ´ 15 W self oscillating digital amplifier system can be built, operating with high...
Mfg:PHILIPS D/C:07+ Vendor:Other Category:Other
The TDA8924 is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 ×120 W.The TDA8924 comes in a HSOP24 power package with a small internal heatsink. Depending on supp...
Vendor:Other Category:Other
The TDA8922C is designed as one kind of high-efficiency class-D audio power amplifier device that is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from ±12.5 ...
Vendor:Other Category:Other
The TDA8922B is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2×50 W.The TDA8922B is available in the HSOP24 power package and in the DBS23P through-hole power pac...
Mfg:PHILIPS D/C:07+ Vendor:Other Category:Other
The TDA8922 is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 ×25 W.The TDA8922 is available in the HSOP24 power package with a small internal heatsink and in the...
Vendor:Other Category:Other
The TDA8920C is designed as one kind of high-efficiency class-D audio power amplifier device that is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from ±12.5 ...
Vendor:Other Category:Other
The TDA8920B is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 × 100 W.The TDA8920B is available in the HSOP24 power package and in the DBS23P through-hole power ...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The TDA8920 is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power of the TDA8920 is 2 ´ 80 W. The device comes in a HSOP24 power package with a small internal heatsi...
Vendor:Other Category:Other
The various versions of the TDA884X/5X-N2 series are2 I C-bus controlled single chip TV processors which are intended to be applied in PAL, NTSC, PAL/NTSC and multi-standard television receivers. The N2 version is pin an...
Mfg:PHL Pack:DIP Vendor:Other Category:Other
OM8838/TDA8843 is the I2C-controlled PAL/NTSC television signal processing monotholic integrated circuit produced by Philips. TDA8843 contains picture/accompanying sound amplifier/demodulator circuit, V/C/D signal proces...
Pack:1000 D/C:01+ Vendor:Other Category:Other
The TDA8822 is a programmable modulator which generates an RF TV channel from a baseband video signal and a baseband audio signal in the event of negative video and FM sound standards (B/G, I, D/K, M and N standards).Two...
Mfg:PHILIPS Pack:SOP Vendor:Other Category:Other
The TDA8809T is a bipolar integrated circuit which provides control signals for the radial motor. These control signals are generated from radial error signals received from a photo-diode signal processor (TDA8808), and ...
Vendor:Other Category:Other
The TDA8798 is a dual 8-bit ADC with DPGA.The 100 Msps maximum sampling rate and 34 dBV DPGA gain range optimizes the ADC for high dynamic range applications.
Vendor:Other Category:Other
The TDA8793 is an 8-bit low-power Analog-to-Digital Converter (ADC) which includes a track-and-hold circuit and internal references. The device converts an analog input signal, up to 100 MHz, into 8-bit binary codes at a...
Mfg:PHILIPS Pack:800 Vendor:Other Category:Other
The TDA8792 is a 8-bit analog-to-digital converter (ADC) for low-voltage, portable applications. It operates at 3.3 V and converts the analog input signal into 8-bit binary-coded digital words at a maximum sampling rate ...
Mfg:PHILIPS Pack:2608 Vendor:Other Category:Other
The TDA8790 is an 8-bit universal analog-to-digital converter (ADC) for video and general purpose applications. It converts the analog input signal from 2.7 to 5.5 V into 8-bit binary-coded digital words at a maximum sam...
Vendor:Other Category:Other
The TDA8787A is designed as one kind of 10-bit analog-to-digital interface device that can be used in low-power, low-voltage CCD camera systems applications. And this device includes a correlated double sampling circuit,...
Pack:2000 Vendor:Other Category:Other
The TDA8786; TDA8786A is a 10-bit analog-to-digital interface for CCD cameras. The device includes a correlated double sampling circuit, AGC, a soft clipper circuit and a low power 10-bit Analog-to-Digital Converter (ADC...
Vendor:Other Category:Other
The TDA8786; TDA8786A is a 10-bit analog-to-digital interface for CCD cameras. The device includes a correlated double sampling circuit, AGC, a soft clipper circuit and a low power 10-bit Analog-to-Digital Converter (ADC...
Vendor:Other Category:Other
The TDA8784 is a 10-bit analog-to-digital interface for CCD cameras. The device includes a correlated double sampling circuit, AGC and a low-power 10-bit Analog-to-Digital Converter (ADC) together with its reference volt...
Mfg:PHI Pack:QFP/48 Vendor:Other Category:Other
The TDA8783 is a 10-bit analog-to-digital interface for CCD cameras. The device includes a correlated double sampling circuit, AGC and a low-power 10-bit Analog-to-Digital Converter (ADC) together with its reference volt...
Vendor:Other Category:Other
The TDA8777 consists of three separate 10-bit video Digital-to-Analog Converters (DACs) with complementary outputs. They convert the digital input signals into analog current outputs at a maximum conversion rate of 330 M...
Vendor:Other Category:Other
The TDA8776A is a 10-bit Digital-to-Analog Converters (DACs) for high resolution video and other high frequency applications. It converts the digital input signals into an analog current outputs at a maximum conversion r...
Vendor:Other Category:Other
The TDA8775 consists of three 10-bit video Digital-to-Analog Converters (DACs). They convert the digital input signals into current outputs at a maximum conversion rate of 50 MHz. The device is fabricated in a 5V CMOS pr...
Vendor:Other Category:Other
The TDA8772 is a triple 8-bit video Digital-to-Analog Converter (DAC). It converts the digital input signals into analog voltage outputs at a maximum conversion rate of 35 MHz (TDA8772H/3) and 85 MHz (TDA8772H/8).The DAC...
Vendor:Other Category:Other
The TDA8771A is a triple 8-bit video Digital-to-Analog Converter (DAC). It converts the digital input signals into analog voltage outputs at a maximum conversion rate of 35 MHz. The device is fabricated in a 5 V CMOS pro...
Vendor:Other Category:Other
The TDA8769 is a BiCMOS 12-bit Analog-to-Digital Converter (ADC) optimized for GSM/EDGE, W-CDMA and CDMA2000 radio transceivers, high data rate radios and other applications such as advanced FM radio and professional ima...
Vendor:Other Category:Other
The TDA8768B is a biCMOS 12-bit Analog-to-Digital Converter (ADC) optimized for EDGE and W-CDMA cellular infrastructures, professional telecommunications and other applications such as advanced FM radio and professional ...
Vendor:Other Category:Other
The TDA8768AH is a biCMOS 12-bit Analog-to-Digital Converter (ADC) optimized for GSM and EDGE cellular nfrastructures, professional telecommunications and imaging, and advanced FM radio. It converts the analog input sig...
Vendor:Other Category:Other
The TDA8766 is a 10-bit high-speed Analog-to-Digital Converter (ADC) for professional video and other applications. It converts with 3.0 to 5.25 V operation the analog input signal into 10-bit binary-coded digital words ...
Vendor:Other Category:Other
The TDA8764TS is a 10-bit high-speed low-powerAnalog-to-Digital Converter (ADC) for professional videoand other applications. It converts the analog input signalinto 10-bit binary or gray coded digital words at a maximum...
Vendor:Other Category:Other
The TDA8764HL is a 10-bit high-speed low-powerAnalog-to-Digital Converter (ADC) for professional videoand other applications. It converts the analog input signalinto 10-bit binary or gray coded digital words at a maximum...
Vendor:Other Category:Other
The TDA8764A is a 10-bit high-speed low-power Analog-to-Digital Converter (ADC) for professional video and other applications. It converts the analog input signal into 10-bit binary or gray coded digital words at a maxim...
Mfg:PHILPS Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The TDA8764 is a 10-bit high-speed low-power Analog-to-Digital Converter (ADC) for professional videoand other applications. It converts the analog input signal into 10-bit binary or gray coded digital words at a maximum...
Vendor:Other Category:Other
The TDA8763A is a 10-bit high-speed low-power analog-to-digital converter (ADC) for professional video and other applications. It converts the analog input signal into 10-bit binary-coded digital words at a maximum sampl...
Mfg:PHILIPS Pack:SOP D/C:50 Vendor:Other Category:Other
The TDA8763 is a 10-bit high-speed low-power Analog-to-Digital Converter (ADC) for professional video and other applications. It converts the analog input signal into 10-bit binary-coded digital words at a maximum sampli...
Vendor:Other Category:Other
The TDA8762AM_6 is a 10-bit high-speed analog-to-digital converter (ADC) for professional video and other applications. It converts the analog input signal into 10-bit binary-coded digital words at a maximum samp...
Vendor:Other Category:Other
The TDA8762A is a 10-bit high-speed analog-to-digital converter (ADC) for professional video and other applications. It converts the analog input signal into 10-bit binary-coded digital words at a maximum sampling rate o...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.