© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The TDA18250HN is designed as one kind of single-chip direct conversion Silicon Tuner IC device that can be used for high definition cable Set Top Boxes (STB) supporting single streaming.
Features of the TDA18250HN are:...
Vendor:Other Category:Other
The TDA18219HN is designed as one kind of single-chip direct conversion Silicon Tuner IC device that can be used for high definition cable Set Top Boxes (STB) supporting single streaming.
Features of the TDA18219HN are:...
Vendor:Other Category:Other
The TDA18218HN is designed as one kind of single-chip direct conversion Silicon Tuner IC device that integrates the overall tuning function, including selectivity and provides a low-IF output signal. And this device requ...
Vendor:Other Category:Other
The TDA18212HN is designed as one kind of single-chip direct conversion Silicon Tuner IC device that is only to be used as Slave Silicon Tuner in dual tuner application. And it supports all digital TV standards and deliv...
Vendor:Other Category:Other
The TDA18211HD is designed as one kind of Silicon Tuner IC device thatintegrates the overall tuning function, including selectivity, and provides a low-IF output signal. And this device uses integrated IF filters to supp...
Mfg:STM Pack:SIP-10 D/C:04+ Vendor:Other Category:Other
The TDA1771 is a monolithic integrated circuit in SIP10 package.It is a full performance and very efficient vertical deflection circuit intended for direct drive of a TV picture tube in Color and B & W television as ...
Mfg:INFINEON Pack:DIP Vendor:Infineon Technologies Category:Integrated Circuits (ICs)
IC PWM CURRENT MODE SMPS PDIP-20The TDA16888 comprises the complete control for power factor controlled switched mode power supplies. With its PFC and PWM section being internally synchronized, it applies for off-line converters with input voltages ran...
Mfg:INFINEON Pack:840 Vendor:Infineon Technologies Category:Integrated Circuits (ICs)
IC POWER SUPPLY CONTROLLER 14DIPThe TDA16847 is optimized to control free running or fixed frequency flyback converters with or without Power Factor Correction (Current Pump). To provide low power consumption at light loads, this TDA16847 reduces the s...
Vendor:Infineon Technologies Category:Integrated Circuits (ICs)
IC PWM CURRENT MODE SMPS PDIP-14The TDA16846 is optimized to control free running or fixed frequency flyback converters with or without Power Factor Correction (Current Pump). To provide low power consumption at light loads, this device reduces the swi...
Vendor:Other Category:Other
The TDA16831-4 is a current mode pulse width modulator with integrated sense CoolMOS transistor. It fulfills the requirements of minimum external control circuitry for a flyback application. Current mode control means th...
Vendor:Infineon Technologies Category:Integrated Circuits (ICs)
IC OFFLINE CTRLR SMPS CM 8DIPThe TDA16822 is a kind of current mode pulse width modulator with built in CoolMOS transistor. It is available in P-DIP-8-6 package.
There are some features of the TDA16822 as follows: 1)typical RDSon=3 Ohm; (2)only few...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA1675A is a monolithic integrated circuit in 15-lead Multiwatt® package. It is a full performance and very efficient vertical deflection circuit intended for direct drive of the yoke of 110o colour TV picture t...
Vendor:Other Category:Other
The TDA1675 is designed as one kind of vertical deflection circuit device that is a full performance and very efficient vertical deflection circuit intended for direct drive of the yoke of 110o colour TV picture tubes. T...
Vendor:Other Category:Other
The TDA1670A is a monolithic intergrated circuit in 15-lead Multiwatt package.It is a full performance and very efficient vertical deflection circuit intended for direct drive of the yoke of 110 colour TV picture t...
Vendor:Other Category:Other
The TDA1600 is designed as one kind of multi-function oscillator switch for an audio cassette recorder that contains several functions which can be selected by external d.c. voltage levels or via a micro-processor. This ...
Vendor:Other Category:Other
The TDA1599T is designed as one kind of IF amplifier/demodulator for FM radio receiver device that provides IF amplification, symmetrical quadrature demodulation and level detection for quality home and car FM radio rece...
Mfg:PHILIPS Pack:SOP D/C:00+ Vendor:Other Category:Other
The TDA1599 provides IF amplification, symmetrical quadrature demodulation and level detection for quality home and car FM radio receivers and is suitable for mono and stereo reception. It may also be applied to common f...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The TDA1597 provides IF amplification, symmetrical quadrature demodulation and level detection for quality home and car FM radio receivers and is suitable for mono and stereo reception. It may also be applied to common f...
Vendor:Other Category:Other
The TDA1596T/V3 is designed as one kind of IF amplifier/demodulator for FM radio receiver device that provides IF amplification, symmetrical quadrature demodulation and level detection for quality home and car FM radio r...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA1596T provides IF amplification, symmetrical quadrature demodulation and level detection for quality home and car FM radio receivers and is suitable for both mono and stereo reception. It may also be applied to co...
Mfg:PHILIPS Pack:DIP18 D/C:5347 Vendor:Other Category:Other
The TDA1593 provides IF amplification, symmetrical quadrature demodulation and level detection for quality FM car radio receivers and is suitable for mono and stereo reception. It may also be applied to common front ends...
Mfg:PHILIPS Pack:520 D/C:99+ Vendor:Other Category:Other
The TDA1592 is a monolithic bipolar integrated circuit providing the stereo decoder function and noise blanking for FM car radio applications.
The device operates in a power supply range of 7.5 to 12 V.
Mfg:PHI Pack:DIP Vendor:Other Category:Other
The TDA1591 is a monolithic bipolar integrated circuit providing the stereo decoder function and noise blanking for FM car radio applications.
The device operates in a power supply range of 7.5 to 12 V.
Mfg:PHILIPS Pack:SOP Vendor:Other Category:Other
The TDA1581T decoder is for radio transmissions having 57 kHz amplitude-modulated subcarriers as used in the german 'Verkehrs Warnfunk' (VWF) traffic warning system.
Mfg:PHILIPS Pack:SOP Vendor:Other Category:Other
The TDA1579T decoder is for radio transmissions having 57 kHz amplitude-modulated subcarriers as used in the German 'Verkehrs Warnfunk' (VWF) traffic warning system.
Mfg:PHILIPS Pack:PDIP Vendor:Other Category:Other
The TDA1579 decoder is for radio transmissions having 57 kHz amplitude-modulated subcarriers as used in the German 'Verkehrs Warnfunk' (VWF) traffic warning system.
Mfg:PHILPS Pack:SOP Vendor:Other Category:Other
The TDA1576T is a monolithic integrated FM/IF amplifier circuit for use in mono and stereo FM-receivers of car radios or home sets.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1576 is a monolithic integrated FM/IF amplifier circuit for use in mono and stereo FM-receivers of car radios or home sets.
Vendor:Other Category:Other
The TDA1575T/V2 is designed as one kind of FM front end circuit device that can be used for CENELEC EN 55020 applications. Features of the TDA1575T/V2 are:(1)Bipolar integrated FM front end circuit, designed for use in c...
Mfg:PHILIPS Pack:SOP Vendor:Other Category:Other
Mfg:PHILIPS D/C:SOP Vendor:Other Category:Other
The TDA1574T is an integrated FM tuner circuit designed for use in the RF/IF section of car radios and home receivers. The circuit contains a mixer and an oscillator and a linear IF amplifier for signal processing. The c...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1574 is a monolithic integrated FM tuner circuit designed for use in the r.f./i.f. section of car radios and home-receivers. The circuit comprises a mixer, oscillator and a linear i.f. amplifier for signal process...
Vendor:Other Category:Other
The TDA1572T/V3 is designed as one kind of FM front end circuit device that can be used for CENELEC EN 55020 applications. Features of the TDA1572T/V3 are:(1)Inputs protected against damage by static discharge; (2)Gain-c...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The TDA1572T integrated AM receiver circuit performs all the active functions and part of the filtering required of an AM radio receiver. It is intended for use in mains-fed home receivers and car radios. The circuit can...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1572 integrated AM receiver circuit performs all the active functions and part of the filtering required of an AM radio receiver. It is intended for use in mains-fed home receivers and car radios. The circuit ca...
Vendor:Other Category:Other
The TDA1566 is designed as one kind of car audio power amplifier that has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package. And this device can be configured in a single BTL mode and drive...
Mfg:PHILIPS Pack:SOP D/C:06+ Vendor:Other Category:Other
The TDA1565TH is a monolithic power amplifier in a 20-lead heatsink small outline plastic package. It contains two identical 40 W amplifiers. Power dissipation is minimized by switching from SE to BTL mode only when a hi...
Mfg:PHI Pack:SOP-20 Vendor:Other Category:Other
The TDA1564 is a monolithic power amplifier in a 17-lead single-in-line (SIL) plastic power package. It contains two identical 25 W amplifiers. The dissipation is minimized by switching from SE to BTL mode, only when a h...
Pack:ZIP-17 D/C:01+ Vendor:Other Category:Other
The TDA1563Q is a monolithic power amplifier in a 17-lead DIL-bent-SIL plastic power package. It contains two identical 25 Wamplifiers. The dissipation is minimized by switching from SE to BTL mode when a higher output v...
Mfg:PHI Pack:SQL-17 D/C:06+ Vendor:Other Category:Other
The TDA1562ST is a monolithic integrated 70 W/4 Bridge-Tied Load (BTL) class-H high efficiency power amplifier in a 17 lead DIL-bent-SIL plastic power package.The device can be used for car audio systems (e.g. car radio...
Mfg:NXP Pack:SQL-17 D/C:07+ Vendor:Other Category:Other
The TDA1562SD is a monolithic integrated 70 W/4 Bridge-Tied Load (BTL) class-H high efficiency power amplifier in a 17 lead DIL-bent-SIL plastic power package.The device can be used for car audio systems (e.g. car radio...
Mfg:PHI Pack:SQL-11 D/C:03+ Vendor:Other Category:Other
The TDA1562Q is a monolithic integrated 70 W/4 W Bridge-Tied Load (BTL) class-H high efficiency power amplifier in a 17-lead DIL-bent-SIL plastic power package.
The device can be used for car audio systems (e.g. car, r...
Mfg:PHI Pack:SQL-13 D/C:97+ Vendor:Other Category:Other
The TDA1561Q is a monolithic power amplifier in a 13 lead single-in-line (SIL) plastic power package. It contains two identical 23 W amplifiers. The dissipation is minimized by switching from SE to BTL mode, only when a ...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA1560Q is an integrated Bridge-Tied Load (BTL) class-H high power amplifier. In a load of 8 W, the output power is 40 W typical at a THD of 10%.
The encapsulation is a 17-lead DIL-bent-SIL plastic power package. T...
Vendor:Other Category:Other
The TDA1558Q/N1 is designed as one kind of 2 x 22 W or 4 x 11 W single-ended car radio power amplifier device that integrated class-B output amplifier in a 17-lead single-in-line (SIL) plastic power package. The device c...
Mfg:PHI Pack:SQL-17 D/C:94+ Vendor:Other Category:Other
The TDA1558Q is a monolithic integrated class-B output amplifier in a 17-lead single-in-line (SIL) plastic power package. The device contains 4 x 11 W single-ended or 2 x 22 W BTL amplifiers and has been primarily develo...
Mfg:PHILIPS Pack:ZIP Vendor:Other Category:Other
The TDA1557Q is a monolithic integrated class-B output amplifier in a 13-lead single-in-line (SIL) plastic power package. The device contains 2 ´× 22 W amplifiers in BTL configuration and has been primarily develop...
Mfg:PHI Pack:SQL-17 D/C:95+ Vendor:Other Category:Other
TDA1556Q is a monolithic integrated class-B output amplifier containing two 22 Watt amplifiers in a BTL configuration. The device is contained in a 17-lead single-in-line (SIL) plastic power package. It has two different...
Mfg:PHILPS Pack:ZIP Vendor:Other Category:Other
The TDA1555Q is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) plastic power package.The circuit contains 4 x 11 W single-ended or 2 x 22 W bridge amplifiers. The device is primarily developed f...
Mfg:PHILPS Pack:ZIP Vendor:Other Category:Other
The TDA1554Q is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) plastic power package.The circuit contains 4 x 11 W single-ended or 2 x 22 W bridge amplifiers. The device is primarily developed f...
Mfg:PHI Pack:SQL-13 D/C:95+ Vendor:Other Category:Other
The TDA1553Q is an integrated class-B output amplifier in a 13-lead singe-in-line (SIL) plastic power package. The circuit contains 2 x 22 W amplifiers in Bridge Tied Load (BTL) configuration. The device is primarily dev...
Mfg:PHI Pack:SQL-13 D/C:97+ Vendor:Other Category:Other
The TDA1553CQ is a monolithic integrated class-B output amplifier in a 13-lead plastic DIL-bent-SIL power package. It contains 2 ´ 22 W amplifiers in BTL configuration. The device is primarily developed for car rad...
Mfg:PHILIPS Pack:ZIP Vendor:Other Category:Other
The TDA1552Q contains two identical amplifiers with differential input stages and can be used for bridge applications. The gain of each amplifier is fixed at 26 dB. A special feature of this device is:
Vendor:Other Category:Other
The TDA1551Q is an integrated class-B output amplifier encased in a 17-lead single-in-line plastic power package. The device contains 4 ´× 11 W single-ended (SE) or 2 ´× 22 W BTL amplifiers and is intended fo...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA1549T (BCC-DAC1) is the first of a new generation of digital-to-analog converters featuring a unique combination of bitstream and continuous calibration concepts.
A system of digital filtering, high oversampling,...
Mfg:PHILIPS Pack:96+ D/C:1200
Vendor:Other Category:Other
The TDA1548T is a dual CMOS digital-to-analog converter (DAC) with up-sampling filter and noise shaper andintegrated headphone driver featuring unique signal processing functions. The digital processing features are of h...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1547 is a dedicated one-bit digital-to-analog converter to facilitate a high fidelity sound reproduction of digital audio. The TDA1547 is extremely suitable for use in high quality audio systems such as Compact Di...
Vendor:Other Category:Other
The TDA1546T is the first Bitstream Continuous Calibration digital-to-analog converter (BCC-DAC) to feature unique signal processing functions. In addition to the basic functions of digital filtering and digital-to-analo...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1545A is the first device of a new generation of the digital-to-analog converters which embodies the innovative technique of continuous calibration. The largest bit-currents are repeatedly generated by one single ...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1543 is a monolithic integrated dual 16-bit digital-to-analog converter (DAC) designed as an economy version for use in hi-fi digital audio equipment such as Compact Disc players, digital tape or cassette recorder...
Vendor:Other Category:Other
The TDA1541A is a stereo 16-bit digital-to-analog converter (DAC). The ingenious design of the electronic circuit guarantees a high performance and superior sound quality. The TDA1541A is therefore extremely suitable for...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA1541 is a monolithic integrated dual 16-bit digital-to-analogue converter (DAC) designed for use in hi-fi digital audio equipment such as Compact Disc players, digital tape or cassette recorders.
Vendor:Other Category:Other
The TDA1540 is designed as one kind of monolithic integrated 14-bit digital-to-analog converter (DAC) that can be used in wide range of applications such as:(1)sound reproduction;(2)recording systems;(3)graphic display s...
Vendor:Other Category:Other
The TDA1535B is designed as one kind of high-speed sample-and-hold amplifier with a total harmonic distortion of 0.001%, and a very high signal-to-noise ratio. The excellent performance of the circuit makes it suitable f...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1526 is designed as an active stereo-tone/volume control for car radios, TV receivers and mains-fed equipment. It includes functions for bass and treble control, volume control with built-in contour (can be switch...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1524A is designed as an active stereo-tone/volume control for car radios, TV receivers and mains-fed equipment. It includes functions for bass and treble control, volume control with built-in contour (can be switc...
Mfg:PHI Pack:500 Vendor:Other Category:Other
The TDA1524 is designed as an active stereo-tone/volume control for car radios, TV receivers and mains-fed equipment.It includes functions for bass and treble control, volume control with built-in contour (can be switche...
Mfg:PHILIPS Pack:DIP D/C:02+ Vendor:Other Category:Other
The TDA1523 is a playback amplifier for car radio/cassette players.
Mfg:PHI Pack:SIP-9 D/C:86+ Vendor:Other Category:Other
The TDA1522 is a playback amplifier for car radio/cassette players.
Mfg:PHI Pack:1989 D/C:04+ Vendor:Other Category:Other
This hi-fi stereo power amplifier is designed for mains fed applications. The TDA1521Q is designed for both symmetrical and asymmetrical power supply systems. An output power of 2 ×´ 12 watts (THD = 0,5%) can be d...
Mfg:PHI Pack:SIP Vendor:Other Category:Other
The TDA1521A is a dual hi-fi audio power amplifier encapsulated in a 9-lead plastic power package. The device is especially designed for mains fed applications (e.g. stereo tv sound and stereo radio).
Vendor:Other Category:Other
This hi-fi stereo power amplifier is designed for mains fed applications. The TDA1521 is designed for both symmetrical and asymmetrical power supply systems. An output power of 2 ×´ 12 watts (THD = 0,5%) can be de...
Vendor:Other Category:Other
The TDA1520B is designed as one kind of integrated hi-fi audio power amplifier designed for use with non-srabilzed symmetrical or stabilized asymmetrical power supplies in mains-fed applications (e.g. stereo radio, stere...
Vendor:Other Category:Other
The TDA1520A is designed as one kind of integrated hi-fi audio power amplifier designed for use with non-srabilzed symmetrical or stabilized asymmetrical power supplies in mains-fed applications (e.g. stereo radio, stere...
Vendor:Other Category:Other
The TDA1519CTD is designed as one kind of integrated class-B dual output amplifier that is available in a 9-lead single in-line (SIL) plastic medium power package. The device is primarily developed for car radio applic...
Mfg:PHI Pack:SIP-9 D/C:06+ Vendor:Other Category:Other
The TDA1519C is an integrated class-B dual output amplifier in a 9-lead plastic single in-line (SIL) power or 20-lead heatsink small outline package.
For the TDA1519CTH (SOT418-2) the heatsink is positioned on top of th...
Vendor:Other Category:Other
The TDA1519B is an integrated class-B dual output amplifier in a 9-lead single in-line (SIL) plastic medium power package. The device is primarily developed for car radio applications.
Mfg:PHILPS Pack:ZIP Vendor:Other Category:Other
The TDA1519A is an integrated class-B dual output amplifier in a 9-lead single in-line (SIL) plastic power package. The device is primarily developed for car radio applications.
Vendor:Other Category:Other
The TDA1519 is an integrated class-B dual output amplifier in a 9-lead single in-line (SIL) plastic medium power package. The device is primarily developed for car radio applications.
The TDA1519 is designed as an integ...
Vendor:Other Category:Other
The TDA1518BQ is an integrated class-B output amplifier in a 13-lead single-in-line (SIL) plastic power package. The device is primarily developed for car radio applications.
Vendor:Other Category:Other
The TDA1517P/N3 is one member of the TDA1517 family which is designed as the 2 x 6 W stereo power amplifier that is in a plastic single in-line medium power package with fin (SIL9MPF) and a plastic heat-dissipating dual ...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1517P is an integrated class-B dual output amplifier in a plastic single in-line medium power package with fin (SIL9MPF) and a plastic heat-dissipating dual in-line package (HDIP18). The device is primarily develo...
Mfg:PHI Pack:N/A D/C:06+ Vendor:Other Category:Other
The TDA1517ATW is an integrated class-AB output amplifier contained in a plastic heatsink thin shrink small outline package (HTSSOP20). The device is primarily developed for multimedia applications.
Vendor:Other Category:Other
The TDA1517 is an integrated class-B dual output amplifier in a plastic single in-line medium power package with fin (SIL9MPF) and a plastic heat-dissipating dual in-line package (HDIP18). The device is primarily develop...
Mfg:PHI Pack:SQL-13 D/C:97+ Vendor:Other Category:Other
The TDA1516CQ is a monolithic integrated class-B output amplifier in a 13-lead single-in-line (SIL) plastic power package. The device is primarily developed for car radio applications.
Mfg:PHI Pack:SQL-13 D/C:97+ Vendor:Other Category:Other
The TDA1516BQ is an integrated class-B output amplifier in a 13-lead single-in-line (SlL) plastic power package. The device is primarily developed for car radio applications.
Mfg:PHI Pack:SQL-13 D/C:98+ Vendor:Other Category:Other
The TDA1515BQ is a monolithic integrated class-B output amplifier in a 13-lead single in-line (SIL) plastic power package. The device is primarily developed for car radio applications, and also to drive low-impedance loa...
Mfg:TDA Vendor:Other Category:Other
The TDA1514A integrated circuit is a hi-fi power amplifier for use as a building block in radio, tv and other audio applications. The high performance of the IC meets the requirements of digital sources (e.g. Compact Dis...
Vendor:Other Category:Other
The TDA1512 is designed as one kind of monolithic integrated hi-fi audio power amplifier designed for asymmetrical power supplies for mains-fed apparatus. Features of this device are:(1)thermal protection;(2)low intermod...
Mfg:PHI Pack:SQL-13 D/C:03+ Vendor:Other Category:Other
The TDA1510AQ is a class-B integrated output amplifier encapsulated in a 13-lead single in-line (SlL) plastic power package. Developed primarily for car radio application, the device can also be used to drive low impedan...
Mfg:DIP Pack:. D/C:03+ Vendor:Other Category:Other
The TDA1400 is a one-channel, Amplifier Driver that uses Tripath's proprietary Digital Power Processing (DPPTM) technology. The TDA1400 offers higher integration over previous Tripath amplifiers driver chipsets while pro...
Mfg:PHILIPS Pack:SOP28 D/C:97+ Vendor:Other Category:Other
The TDA1388T CMOS digital-to-analog bitstream convertor incorporates an up-sampling digital filter and noise shaper, unique signal processing features and integrated line and headphone drivers. The digital processing fea...
Vendor:Other Category:Other
The TDA1388 CMOS digital-to-analog bitstream converter incorporates an up-sampling digital filter and noise shaper, unique signal processing features and integrated line and headphone drivers. The digital processing feat...
Mfg:PHILIPS Pack:SMD Vendor:Other Category:Other
The TDA1387T is a member of a generation of digital-to-analog converters which incorporates the innovative technique of Continuous Calibration. The largest bit currents are repeatedly generated from one single reference ...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA1386T is a dual CMOS digital-to-analog converter with up-sampling filter and noise shaper. The combination of oversampling up to 4fs, noise shaping and continuous calibration conversion ensures that only simple 1s...
Pack:PHI D/C:QFP Vendor:Other Category:Other
The TDA1373H is a General Digital Input (GDIN) device for audio signals which is able to perform a high-quality sample rate conversion of digital audio signals (SRC mode). The device reads several serial input formats an...
Mfg:PHI D/C:QFP Vendor:Other Category:Other
The Digital Audio Input/Output circuit (DAIO) of the TDA1315H is a complete transceiver for biphase-mark encoded digital audio signals that conform to the SPDIF and "IEC 958" interface standards (consumer mode), made in ...
Vendor:Other Category:Other
The TDA1314T is a quadruple very low noise high dynamic range DAC which is intended for use in motor cars and is controlled by the car radio DSP. Each channel incorporates an 8th-order IIR up-sampling filter from 1ASF to...
Mfg:PHILIPS Pack:SOP-16 D/C:98+ Vendor:Other Category:Other
The TDA1313Tis a voltage driven digital-to-analog converter, and is of a new generation of DACs which incorporates the innovative technique of Continuous Calibration (CC). The largest bit-currents are repeatedly generate...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA1313; 1313T is a voltage driven digital-to-analog converter, and is of a new generation of DACs which incorporates the innovative technique of Continuous Calibration (CC). The largest bit-currents are repeatedly g...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.