About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index T : TEW6575,TEW6197,TES6-1212,
TEW6575
Vendor:Other Category:Other
TEW6575 is designed to be used as an input/output transformer in HDSL applications for use with Brooktree BT8973.TEW6197
Vendor:Other Category:Other
The 4 wire interface between Subscriber Terminals and the Network Termination has been standardized by CCITT recommendation I.430. It uses a passive bus which provides separate receiver and transmit loops operating at 19...TEW6175
Vendor:Other Category:Other
TEW6175 is designed and approved for Mitel MT8972 and MT8971B/72B devices.TEW6140
Vendor:Other Category:Other
TEW6102
Vendor:Other Category:Other
TEW6102 is designed to interface with the Motorola MC145422/26 UDLT (Universal Digital-Loop Transceivers).The MC145422/26 UDLT's are high-speed data transceivers that provide 80-kbps full-duplex data communications over ...TEW6092
Vendor:Other Category:Other
TEW6086
Vendor:Other Category:Other
The TEW6086 series transformers are designed to interface with the ADSL transceiver unit at the remote terminal end (ATU-R) and with the ADSL transceiver unit at the central office end ( ATU-C).TEW6055
Vendor:Other Category:Other
TEW6055 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW6055 meets the electrical specifications of ANSI TI.601- 1988 and ...TEW6045
Vendor:Other Category:Other
TEW6045 is designed to comply with the requirements of an input/output transformer in the ISDN S-Bus Interface.TEW6045 complies with the requirements of CCITT I.430.It has been designed and approved for the following dev...TEW6038
Vendor:Other Category:Other
TEW6018
Vendor:Other Category:Other
TEW6018 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW6018 meet the electrical requirements for theMOTOROLA MC145572 dev...TEW5995
Vendor:Other Category:Other
TEW5995 is a surface mount transformer,designed to comply with the requirements of an input/output transformer in the ISDN S-Bus Interface. TEW5995 complies with the requirements of CCITT I.430.TEW5921
Vendor:Other Category:Other
TEW5921 is designed to be used as a Transmit and Receive transformer in the ISDN primary rate access network with the following devices:TEW5915
Vendor:Other Category:Other
TEW5915 is designed and approved to be used as a Receive Transformer in T1 and CEPT applications, with the following devices:TEW5914
Vendor:Other Category:Other
TEW5914 is is designed and approved to be used as a transmit transformer in T1/CEPT applications with the following devices:TEW5913
Vendor:Other Category:Other
TEW5912
Vendor:Other Category:Other
TEW5791
Vendor:Other Category:Other
TEW5791 is designed to be as an input/output transformer in HSDL applications as described in Bellcore TA-NWT-001210.TEW5769
Vendor:Other Category:Other
TEW5769 is designed to be used as an INPUT/OUTPUT transformer in the ISDN primary rate access network for the following devices:TEW5767
Vendor:Other Category:Other
TEW5767 is specifically designed to be used as a high voltage isolationtransformer in T1 and CEPT applications.The Longitudinal balance exceeds the requirements of CCITT I.431.The Return Loss exceeds the requirements of ...TEW5747
Vendor:Other Category:Other
TEW5747 is designed to be used as a receive transformer in the following applications on 75 coaxial lines.` T3/DS3 44.736 MBPS` E3 34.368 MBPS` STS-1 51.84 MBPSTEW5746
Vendor:Other Category:Other
TEW5746 is designed to be used as a transmit transformer in the following applications on75 W coaxial lines.· T3/DS3 44.736 MBPS· E3 34.368 MBPS· STS-1 51.84MBPSTEW5736
Vendor:Other Category:Other
TEW5720
Mfg:FTR Pack:INPUT TRANSFORMER D/C:07+ Vendor:Other Category:Other
TEW5720 is designed to be used as a transmit transformer in the ISDN primary rate access network with the following devices: Dallas DS2186 DS2151Q DS2153Q AT&T T7290 PMC-Sierra PM4341 T...TEW5719
Vendor:Other Category:Other
TEW5719 is designed to be used as a Receive transformer in the ISDN primary rate access network.TEW5716
Vendor:Other Category:Other
TEW5716 is designed to be used, as a transmit transformer in the ISDN primary rate access network interfacing the Mitel MT89760/60B and MT89790/90B devices.TEW5716-4 is designed for MT89790B when operating from a single ...TEW5714
Vendor:Other Category:Other
TEW5694
Vendor:Other Category:Other
TEW5694 is designed and approved to be used, as a transmit transformer in CEPT applications with the following devices:TEW5660
Vendor:Other Category:Other
TEW5660 is a surface mount transformer, designed to comply with the requirements of an input/output transformer in the ISDN S-Bus Interface. TEW5660 complies with the requirements of CCITT I.430.TEW5615
Vendor:Other Category:Other
TEW5515 is designed and approved to be used, as a transmit transformer in CEPT applications, 75 coaxial line, with the following devices:TEW5614
Vendor:Other Category:Other
TEW5514 is designed and approved to be used as a receive transformer in CEPT applications, 75 W coaxial line, with the following devices:TEW5613
Vendor:Other Category:Other
TEW5613 is specifically designed to be used as a Transmit transformer in test setups for testing Longitudinal Balance and Return Loss in Primary Rate and Basic Rate Circuits.TEW5564
Vendor:Other Category:Other
TEW5364 is specifically designed to be used as an isolation/bridging transformer in test setups for testing Longitudinal Balance and Return Loss in Primary Rate and Basic Rate Circuits.A shield is provided to improve the...TEW5550
Vendor:Other Category:Other
TEW5550 is designed to be used as a receive transformer in the following applications on 75 W coaxial lines.TEW5549
Vendor:Other Category:Other
TEW5549 is designed to be used, as a transmit transformer in the following applications on75 W coaxial lines.TEW5532
Vendor:Other Category:Other
TEW5532 is specifically designed to match a 120 twisted pair to a 75 coaxial line in the CEPT trunk.TEW5503
Vendor:Other Category:Other
TEW5502
Vendor:Other Category:Other
TEW5502 is designed and approved to be used as an OUTPUT transformer in T1/CEPT applications with the following devices:Crystal 61535A,61574A 61575, 6158A Level One 304A, 305A Complies with ANSI T1.408 and CCITT I.431 w...TEW5498
Vendor:Other Category:Other
TEW5498 is designed to comply with the requirements of an input/output transformer in the ISDN S-Bus Interface.TEW5498 complies with the requirements of CCITT I.430 and ANSI T1.605.· Compact size· Wide temperature rangeT...TEW5434
Vendor:Other Category:Other
TEW5434 is designed to be used as a Receive transformer in the ISDN primary rate access network.TEW5434 is approved for:TEW5433
Vendor:Other Category:Other
TEW5433 is designed to be used, as a transmit transformer in the ISDN primary rate access network for,Mitel MT89760/60B MT98790/90B TEW5433-4 is designed for, MT89790B when operating from a single 5 ...TEW5414
Vendor:Other Category:Other
TEW5413
Vendor:Other Category:Other
TEW5413 is designed to interface with Mitel MT8972 and MT8971B/72B DNIC devices.TEW5413 has the following features.TEW5389
Vendor:Other Category:Other
TEW5389 is designed and approved for the Level One LXT400 Extended Range DDS Transceiver device.TEW5376
Vendor:Other Category:Other
TEW5376 is designed to be used either as a transmit or as a receive transformer in the ISDN primary rate access network, for the following devices.TEW5363
Vendor:Other Category:Other
TEW5363-1 is designed and approved to be used as a Receive Transformer in T1 and CEPT applications, with the following devices:TEW5362
Vendor:Other Category:Other
TEW5362 is is designed and approved to be used as a transmit transformer in T1/CEPT applications with the following devices:TEW5337
Vendor:Other Category:Other
TEW5337 is a surface mount transformer, designed to comply with the requirements of an input/ output transformer in the ISDN S-Bus Interface.TEW5337 complies with the requirements of CCITT I.430.TEW5335
Vendor:Other Category:Other
TEW5335 is designed and approved for Mitel MT8972 and MT8971A/72B devices.TEW5328
Vendor:Other Category:Other
TEW5328 is designed to be used as a Receive Transformer in the ISDN primary rate access network with the following devices:TEW5327
Vendor:Other Category:Other
TEW5327 is designed to be used as a transmit transformer in the ISDN primary rate access network with the following devices: Dallas DS2186 AT&T T7290 PMC-Sierra PM4341 T1X PM...TEW5318
Vendor:Other Category:Other
TEW5318 is designed to interface with the subscriber premises (NT) and the 2-wire line side of the central office equipment (LT) in the ISDN system.TEW5318 meets the requirements for the Mitel MT8972 and MT8971B/72B devi...TEW5317
Vendor:Other Category:Other
TEW5317 is designed and approved to be used as a receive transformer in CEPT applications with the following device:TEW5316
Vendor:Other Category:Other
TEW5316 is designed and approved to be used as a transmit transformer in CEPT applications with the followingdevices:TEW5315
Vendor:Other Category:Other
TEW5315 is designed to be used either as a transmit or a receive transformer in the ISDN primary access network, interfacing the SIEMENS PEB2235 to a 75, 100 or 120 ohm line. When in transmit mode, connect the two primar...TEW5314
Vendor:Other Category:Other
TEW5314 is designed and approved to be used as a Receive transformer in T1/CEPT applications with the following Crystal devices: CS61535A, CS61574, CS61574A, CS61575 and CS6158A.TEW5301
Vendor:Other Category:Other
TEW5301 is designed and approved to be used as a transmit transformer in T1/CEPT applications with the following devices:TEW5281
Vendor:Other Category:Other
TEW5281 is designed and approved to be used as a Receive Transformer in T1 and CEPT applications with the following devices:TEW5280
Vendor:Other Category:Other
TEW5280 is designed and approved to be used as a transmit transformer in T1/CEPT applications with the following devices: Dallas DS2186 DS2151Q DS2153Q PMC-Sierra PM4341 T1X PM6431 E1 AT&T T7290Complies with ANSI...TEW5252
Vendor:Other Category:Other
TEW5252-1 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW5252-1 meets the electrical requirements for the AT&T T7262 ...TEW5111
Vendor:Other Category:Other
TEW5110
Vendor:Other Category:Other
TEW5110 is designed and approved to be used as an Output Transformer with:TEW5054
Vendor:Other Category:Other
TEW5054 is specifically designed to match a 120 W twisted pair to a 75 W coaxial line in the CEPT trunk.The Longitudinal balance exceeds the requirements of:The Return Loss exceeds the requirements of CCITT G.703 and BS6...TEW5043
Vendor:Other Category:Other
TEW5043 is specifically designed to match a 120 twisted pair to a 75 coaxial line in the CEPT trunk.The Longitudinal balance exceeds the requirements of CCITT I.431. The Return Loss exceeds the requirements of CCITT G...TEW5039
Vendor:Other Category:Other
TEW5009
Vendor:Other Category:Other
TEW5009 is specifically designed to be used as an isolation transformer in test setups for testing Longitudinal Balance and Return Loss in Primary Rate and Basic Rate Circuits.Special attention has been given to the prob...TEW4980
Vendor:Other Category:Other
TEW4980 is designed to be used either as a transmit or a receive transformer in the ISDN primary access network, interfacing SIEMENS PEB2235 and PEB2236 to a 75, 100 or 120 ohm line.When in transmit mode, connect the two...TEW4977
Vendor:Other Category:Other
TEW4976
Vendor:Other Category:Other
TEW4974
Vendor:Other Category:Other
TEW4974 and TEW4974-1 are designed to operate in the 64 kbit mode of the CCITT recommendation G703 for Hierarchical Digital Interfaces.TEW4962
Vendor:Other Category:Other
TEW4962 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW4962 & -1 meet the electrical requirements for the National TP...TEW4923
Vendor:Other Category:Other
TEW4923 is designed/approved for use as an input/output transformer in the ISDN S-Interface.TEW4922
Vendor:Other Category:Other
TEW4922 is designed and approved to be used as a receive transformer with MITEL MT89760/-60B andMT89790/-90B devices.Fully encapsulated in epoxy.Also suitable as input/output transformer for other makes of T1/CEPT interf...TEW4921
Vendor:Other Category:Other
TEW4914
Vendor:Other Category:Other
TEW4914 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW4914 & -1 meet the electrical requirements for the MOTOROLA MC...TEW4897
Vendor:Other Category:Other
TEW4897 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW4855
Vendor:Other Category:Other
TEW4855 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW4855 meets the electrical specifications of ANSI TI.601- 1988 and ...TEW4840
Vendor:Other Category:Other
TEW4840 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW4840 meets the electrical specifications of ANSI TI.601- 1988 and ...TEW4610
Vendor:Other Category:Other
The 4 wire interface between Subscriber Terminals and The Network Temination has been standardised by CCITT recommendation I.430. It uses a passive bus which provides separate receive and transmit loops operating at 192 ...TEW4596
Vendor:Other Category:Other
TEW 4596 is designed to be used either as a transmit or a receive transformer in the ISDN primary rate access network for T1 and CEPT applications.TEW 4596 is recommended for use with the following devices:Crystal CS615...TEW4229
Vendor:Other Category:Other
TEW 4229 is a DNIC interface Transformer approved by Mitel for use with their MT8972 and MT8971B/72B devicesTEW4087
Vendor:Other Category:Other
The TEW4087 transformer was designed to provide matching between a coax cable and a twisted pair.TEW4087 is based on the Ethernet data link protocol which uses baseband signaling at 10Mbps.TET2422
Vendor:Other Category:Other
The TET-series TET2422 are 3W DC/DC-converters which feature an ultrawide input range and very low input current at no-load conditions. Therefore they are ideal for battery operated applications. Full SMT-design with exc...TET2421
Vendor:Other Category:Other
The TET-series TET2421 are 3W DC/DC-converters which feature an ultrawide input range and very low input current at no-load conditions. Therefore they are ideal for battery operated applications. Full SMT-design with exc...TET2413
Vendor:Other Category:Other
The TET-series TET2413 are 3W DC/DC-converters which feature an ultrawide input range and very low input current at no-load conditions. Therefore they are ideal for battery operated applications. Full SMT-design with exc...TET2412
Vendor:Other Category:Other
The TET-series TET2412 are 3W DC/DC-converters which feature an ultrawide input range and very low input current at no-load conditions. Therefore they are ideal for battery operated applications. Full SMT-design with exc...TET2411
Vendor:Other Category:Other
The TET-series are 3W DC/DC-converters TET2411 which feature an ultrawide input range and very low input current at no-load conditions. Therefore they are ideal for battery operated applications. Full SMT-design with exc...TEST2600
Vendor:Other Category:Other
TEST2600 is a high sensitive silicon NPN epitaxial planar phototransistor in a miniature side view plastic package with cylindrical lens. Its epoxy casting is designed as a infrared filter to spectrally match to GaAs IR ...TESS5400
Mfg:VISHAY Pack:DIP3 Vendor:Other Category:Other
TESS5400 INLINE is a high sensitive Photo Schmitt Trigger in a sideview plastic package with spherical lens.Its epoxy casting is designed as an infrared filter spectrally matched to GaAs IR emitters (p=950nm).TESP5700
Vendor:Vishay/Semiconductors Category:Sensors, Transducers
PHOTODIODE PIN SIDE VIEWTESP5700 PIN photodiode is applicable to high speed data transmission specifically at low reverse voltage. Black epoxy package include side view lens and daylight filter, matched to high speed IR emitters.TESN600A
Vendor:Other Category:Other
TESN50A
Vendor:Other Category:Other
TESDU5V0U
Vendor:Other Category:Other
TESDL5V0
Vendor:Other Category:Other
TESDL36V
Vendor:Other Category:Other
TESDE5V0
Vendor:Other Category:Other
TESDE36V
Vendor:Other Category:Other
TES6-1221
Vendor:Other Category:Other
The TES6-1221 converter series is intended for all applications where PCB's are assem-bled on an automated SMD production line. The light weight DIL-package allows easy handling by pick and place machines. High effi...TES6-1213
Vendor:Other Category:Other
The TES6-1213 converter series is intended for all applications where PCB's are assem-bled on an automated SMD production line. The light weight DIL-package allows easy handling by pick and place machines. High effi...TES6-1212
Vendor:Other Category:Other
The TES6-1212 converter series is intended for all applications where PCB's are assem-bled on an automated SMD production line. The light weight DIL-package allows easy handling by pick and place machines. High effi...