About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index T : TFS434,TFS433P,TFP7443,
TFS434
Vendor:Other Category:Other
Remark:Reference level for the relative attenuation arel of the TFS434 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae.The centre freque...TFS433P
Vendor:Other Category:Other
The TFS433P has the following features including Ambient temperature: 23 °C ;Input power level: 0 dBm;Terminating impedances for input: 190 || -3.4 pF,for output: 190 || -3.4 pF. Reference level for the relati...TFS421
Vendor:Other Category:Other
This is the description about TFS 421 of the VI telefilter filter specification. The maximum of the pass band attenuation amax is defined as the insertion loss ae. The nominal frequency fN is fixed at 421,0 MHz wit...TFS420H
Vendor:Other Category:Other
TFS70H43 is a very good product.Here you can get some information about the measurement condition.The ambient temperature (TA) is 23.The input power level is 0 dBm.The terminating impedances is 61 //-9.0 pF for inp...TFS420A1
Vendor:Other Category:Other
The TFS420A1 is designed as VI telefilter. Reference level for the relative attenuation arel of the TFS420A1 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is d...TFS420A
Vendor:Other Category:Other
The TFS420A is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS411
Vendor:Other Category:Other
This is the description about TFS411 of the VI telefilter filter specification. The maximum of the pass band attenuation amax is defined as the insertion loss ae. The nominal frequency fN is fixed at 411,0 MHz with...TFS402
Vendor:Other Category:Other
This is the description about TFS 402 of the VI filter specification. Reference level for the relative attenuation arel of the TFS 402 is the minimum of the pass band attenuation amin. The minimum of the pass band attenu...TFS400C
Mfg:TELEFILTER D/C:03+ Vendor:Other Category:Other
Remark:Reference level for the relative attenuation arel of the TFS 400 C is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae.The TFS400C c...TFS400
Vendor:Other Category:Other
The TFS400 is designed as VI telefilter which is suitable for GSM, DCS 1800 and dual band receivers. It can especially be used in the first IF in which full channel selectivity is not necessary. Due to the high fre...TFS38C
Vendor:Other Category:Other
TFS38C is a kind of VT telefilter.Here you can get some information about the measurement condition.The ambient temperature (TA) is 23.The input power level is 0 dBm.The terminating impedances in fc is 50//0 pF for...TFS380H
Vendor:Other Category:Other
This is the description about TFS380H of the VI RELEFILTER development specification. Reference level for the relative attenuation arel of the TFS 380H is the attenuation at 380 MHz. The nominal frequency fN is fixed at ...TFS380G
Vendor:Other Category:Other
The TFS380G is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS380C
Vendor:Other Category:Other
The TFS380C is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS380B
Vendor:Other Category:Other
The TFS380B is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS380A
Vendor:Other Category:Other
The TFS380A is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS37
Vendor:Other Category:Other
This is the description about TFS37 of the VI RELEFILTER Filter specification, IF filter for digital cable TV. Reference level for the relative attenuation arel of the TFS 37 is the insertion loss. The insertion lo...TFS36F
Vendor:Other Category:Other
This is the description about TFS36F of the VI RELEFILTER Filter specification, IF filter for digital cable TV. Reference level for the relative attenuation arel of the TFS 36F is the insertion loss. The insertion ...TFS36D
Vendor:Other Category:Other
The TFS36D is designed as VI telefilter. Reference level for the relative attenuation arel of the TFS 36D is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defi...TFS360F
Vendor:Other Category:Other
The TFS360F is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS360A
Vendor:Other Category:Other
The TFS360A is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS342
Vendor:Other Category:Other
The TFS342 is designed as VI telefilter. Reference level for the relative attenuation arel of the TFS 342 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defi...TFS341A
Vendor:Other Category:Other
Reference level for TFS341A the relative attenuation arel of the TFS 341 A is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centr...TFS321
Vendor:Other Category:Other
The TFS321 is designed as VI telefilter.Reference level for the relative attenuation arel of the TFS321 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as ...TFS315D
Vendor:Other Category:Other
The maximum of TFS315D the pass band attenuation amax is defined as the insertion loss ae. The nominal frequency fN is fixed at 315,0 MHz without tolerance. The given values for the absoult attenuation arel have to be r...TFS285
Vendor:Other Category:Other
The TFS285 is designed as VI telefilter. Reference level for the relative attenuation arel of the TFS 285 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defi...TFS282A
Vendor:Other Category:Other
The TFS282A is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS276
Vendor:Other Category:Other
The TFS276 is designed as tele filter tft GmbH. Reference level for the relative attenuation arel of the TFS 276 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin ...TFS270A1
Vendor:Other Category:Other
This is the description about TFS 270A1 of the VI TELEFILTER SAW filter specification. Reference level for the relative attenuation arel of the TFS 270A1 is the minimum of the pass band attenuation amin. The minimu...TFS2574
Vendor:Other Category:Other
TFS 2574 is specifically designed for use as a Line Input Transformer in T1/CEPT applications.TFS2574 has been approved by MITEL for use with their MH89760 and MH89790 devices.TFS2574 is available in five versions:- 0, -...TFS2573
Vendor:Other Category:Other
TFS2573 is specifically designed for use as a Line Output Transformer in T1/DS1 applications.TFS2573 has been approved by MITEL for use with their MH89760 device.TFS2573 is available in 3 versions: - 0, -1 and -2 for 100...TFS249A
Vendor:Other Category:Other
The TFS249A is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS248F
Vendor:Other Category:Other
The TFS248F has the following features including Ambient temperature: 23;Input power level: 10 dBm;Terminating impedances : input: 50 ; unbalanced; no matching network,output: 200 ; balanced, no matching network. ...TFS236
Vendor:Other Category:Other
Reference level for the relative attenuation arel of the TFS 236 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequenc...TFS225E
Vendor:Other Category:Other
The TFS225E is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating ...TFS224A
Vendor:Other Category:Other
The TFS224A is designed as VI telefilter.The reference level for the relative attenuation arel of the TFS 224A is the minimum of the pass band attenuation. This value is defined as the insertion loss ae. The nomina...TFS224
Vendor:Other Category:Other
Reference level for the relative attenuation arel of the TFS 224 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequ...TFS220E
Vendor:Other Category:Other
The TFS220E is produced by the VI telefilter. The measurement condition of this TFS220E are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating impedan...TFS211B
Vendor:Other Category:Other
The TFS211B values of the matching elements which are given below are calculated from the source and load impedance. If the values of the matching elements are not equal to standard values the best standard values are gi...TFS211-1
Vendor:Other Category:Other
The TFS211-1 is designed as VI telefiter. Reference level for the relative attenuation arel of the TFS211-1 is the filter attenuation at 211 MHz. The filter attenuation at 211 MHz is called insertion loss ae. ...TFS208B
Vendor:Other Category:Other
Reference level for the relative attenuation arel of the TFS 208B is the maximum attenuation in the passband. The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixe...TFS190C
Vendor:Other Category:Other
The TFS190C is designed as VI telefilter.Reference level for the relative attenuation arel of the TFS 190 C is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined...TFS1842A
Vendor:Other Category:Other
This is the description about TFS 1842A of the VI RELEFILTER development specification. The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1842,5 MHz withou...TFS1842
Vendor:Other Category:Other
The maximum attenuation TFS1842 in the pass band is defined as the insertion loss. The nominal frequency fN is fixed at 1842,5 MHz without any tolerance or limit. The values of absolute attenuation arel are guaranteed fo...TFS183B
Vendor:Other Category:Other
The TFS183B is produced by the VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating impedanc...TFS170D
Vendor:Other Category:Other
This is the description about TFS 170 D of the VI telefilter specification. Reference level for the relative attenuation arel of the TFS 170 D is the minimum of the pass band attenuation amin. Theminimum of the pas...TFS1575G
Vendor:Other Category:Other
The TFS1575G is designed as VI telefilter.The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1575,42 MHz without tolerance or limit. The frequency shi...TFS150N
Vendor:Other Category:Other
The TFS150N is produced by the VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating impedanc...TFS150G3
Vendor:Other Category:Other
The TFS150G3 is designed as VI telefilter.Reference level for the relative attenuation arel of the TFS150G3 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined...TFS141
Vendor:Other Category:Other
TFS141 is a kind of VT telefilter.Here you can get some information about the measurement condition.The ambient temperature (TA) is 23.The input power level is 0 dBm.The terminating impedances at fc is 1.07//-13.2 ...TFS140X
Vendor:Other Category:Other
The reference level for the relative attenuation arel of TFS140X is the minimum of the pass band attenuation amin. This value is defined as the insertion loss ae.The centre frequency fc is the arithmetic mean value of th...TFS140K
Vendor:Other Category:Other
TFS140K is a kind of VT telefilter.Here you can get some information about the measurement condition.The ambient temperature (TA) is 45.The input power level is 0 dBm.The terminating impedances in fc is 50//0 pF fo...TFS140
Vendor:Other Category:Other
The TFS140 is produced by the VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating impedance...TFS1220B
Vendor:Other Category:Other
The TFS1220B is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating...TFS1220
Vendor:Other Category:Other
The TFS1220 is designed as VI telefilter.Reference level for the relative attenuation arel of the TFS 1220 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined ...TFS120C
Vendor:Other Category:Other
TFS120C is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances at fN is 1270 || -11,7 pF for inp...TFS120
Vendor:Other Category:Other
TFS120 is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances at fN is 460 || -11,2 pF for input...TFS117
Vendor:Other Category:Other
TFS117 is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. What comes next is about the characteristics of TFS117. The ...TFS114A
Vendor:Other Category:Other
TFS114A is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The source impedance is 485 ||-11.9 pF. The load impedance is...TFS112G
Vendor:Other Category:Other
TFS112G is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances in fc is 532 ||-6,67 pF for input ...TFS112E
Vendor:Other Category:Other
TFS112E is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances is 500 ||-6,9 pF for input and 600...TFS112A
Vendor:Other Category:Other
TFS112A is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances at fc is 565 |-6,5 pF for input an...TFS110P
Vendor:Other Category:Other
The TFS110P is designed as VI telefilter with measurement conditions of ambient temperature: 23°C and input power level: 0 dBm and terminating impedances for input: 2,9 k || -6.2 pF and for output: 2,8 k || -5.5 pF...TFS110K2
Vendor:Other Category:Other
The TFS110K2 is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating...TFS110K1
Vendor:Other Category:Other
The TFS110K1 is produced by the VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 0 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating impedan...TFS110K
Vendor:Other Category:Other
TFS110K is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances for input is 1000 || -12,4 pF and...TFS110F
Vendor:Other Category:Other
TFS110F is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances for input is 890 || - 5,6 pF and ...TFS110D
Vendor:Other Category:Other
Remark: Reference level for the relative attenuation arel of the TFS 110 D is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre (...TFS110C
Vendor:Other Category:Other
TFS110C is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances for input is 890 || - 5,6 pF and ...TFS110
Vendor:Other Category:Other
TFS110 is a kind of telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is -10 dBm. What comes next is about the characteristics of TFS110. The t...TFS100F
Vendor:Other Category:Other
TFS100F is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances in fc is 57,5 || -23,5 pF for inp...TFS100B3
Vendor:Other Category:Other
The filter TFS100B3 can be driven in an unbalanced way. It is matched to 50 .The matching element values given below are theoretical calculations based on measured values for termination impedance, given in the specifica...TFS100B
Vendor:Other Category:Other
TFS100B is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 0 dBm. The terminating impedances in fc is 77,40 || -3,218 pF for i...TFS 400 D
Vendor:Other Category:Other
TFS 190E
Vendor:Other Category:Other
The TFS 190E has the following Measurement condition including Ambient Temperature: 23 °C;Input Power Level: 0 dBm;Terminating Impedance at fc*: input: 307 // - 12,4 pF,output: 107 // - 16,9 pF. The referenc...TFS 167 G
Vendor:Other Category:Other
Reference level for the relative attenuation arel of the TFS 167G is the maximum of the pass band attenuation amax. The maximum of the pass band attenuation amax is defined as the insertion loss ae. The centre freq...TFRA84J13
Vendor:Other Category:Other
The documentation package for the TFRA84J13 Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 chip consists of the following documents: The Ultramapper™ Family Register Description and the Ultramapper Family System Design Guide...TFRA08C13
Vendor:Other Category:Other
TFR868C
Vendor:Other Category:Other
The TFR868C has the following features including Ambient temperature: 23 °C ;Input power level: 10 dBm;Terminating impedances for input: 50 || 0 pF,for output: 50 || 0 pF. The minimum of the pass band attenuat...TFR4T
Vendor:Other Category:Other
The TFR4T can be used in strobo flasher applications (fast recovery) that has some points of features:(1)average forward current: IF(AV) = 0.3 A;(2)repetitive peak reverse surge voltage: VRRSM = 1000 V or 1500 V;(3)rever...TFR4N
Vendor:Other Category:Other
Features of the TFR4N are:(1)average forward current:IF(AV)=0.3A;(2)repetitive peak reverse voltage:VRRM=1000,1500V;(3)reverse recovery time :trr=4s. The absolute maximum ratings of the TFR4N can be summarized as:(1):th...TFR434A
Vendor:Other Category:Other
TFR434A is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 10 dBm. The terminating impedances is 50 || 0 pF for input and 50 ...TFR434
Vendor:Other Category:Other
TFR434 is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 10 dBm. The terminating impedances is 50 || 0 pF for input and 50 |...TFR433M
Vendor:Other Category:Other
The TFR433M is designed as one kind of VI telefilter. The measurement condition of this device are:(1)Ambient Temperature: 23 °C;(2)Input Power Level: 10 dBm;(3)Source impedance: 50 ;(4)Load impedance: 50 ;(5)Terminating...TFR433F
Vendor:Other Category:Other
TFR433F is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 10 dBm. The terminating impedances is 50 || 0 pF for input and 50 ...TFR423
Vendor:Other Category:Other
TFR423 is a kind of VI telefilter. There are some information about the measurement condition. The ambient temperature is 23. The input power level is 10 dBm. The terminating impedances at fN is 50 || 0 pF for input and...TFR3T
Vendor:Other Category:Other
The TFR3T can be used in strobo flasher applications (fast recovery) that has some points of features:(1)average forward current: IF(AV) = 0.2 A;(2)repetitive peak reverse surge voltage: VRRSM = 1000 V or 1500 V;(3)rever...TFR3N
Vendor:Other Category:Other
The TFR3N is a type of TOSHIBA fast recovery diode silicon diffused device. The absolute maximum ratings of TFR3N can be summerized as:(1)repetitive peak reverse voltage, VRRM is 1000 V; (2)average forward current, IF(A...TFR2N
Vendor:Other Category:Other
The TFR2N can be used in strobo flasher applications (fast recovery) that has some points of features:(1)average forward current: IF(AV) = 0.5 A;(2)repetitive peak reverse surge voltage: VRRSM = 1000 V or 1500 V;(3)rever...TFR1N
Vendor:Other Category:Other
The TFR1N can be used in strobo flasher applications (fast recovery) that has some points of features:(1)average forward current: IF(AV) = 0.5 A;(2)repetitive peak reverse surge voltage: VRRSM = 1000 V or 1500 V;(3)rever...TFR07
Vendor:Other Category:Other
The TFR07 can be used in strobo flasher applications (fast recovery) that has some points of features:(1)average forward current: IF(AV) = 0.2 A;(2)reverse voltage (DC): VRM = 500 V;(3)repetitive peak reverse surge volta...TFPT1206
Vendor:Other Category:Other
TFPT0805L1002DF
Vendor:Other Category:Other
The TFPT0805L1002DF is designed as one kind of linear PTC thermistors, surface mount chip device that has some points of features:(1)Solderable wraparound terminations; (2)Alumina substrate base with PTC thin film elemen...TFPT0805
Vendor:Other Category:Other
TFPT0603
Vendor:Other Category:Other
TFPT
Mfg:Vishay D/C:08+ Vendor:Other Category:Other
Linear PTC Thermistors, Surface Mount Chip TFPTTFPR-QTB1FA2714
Vendor:Other Category:Other
• The SMD series enables smaller board size, higher packing density, reduced storage space, and small equipment• Besides, light weight makes them ideal for miniature applicationsTFP9431
Vendor:Other Category:Other
The TFP9431 is a PanelBus digital display product, part of a comprehensive family of end-to-end DVI 1.0 compliant solutions. Targeted at premium digital CRT monitors, the TFP9431 finds applications in designs requiring ...TFP7453
Vendor:Other Category:Other
The TFP7453 is a family of programmable timing controllers for TFT LCD panels supporting resolutions from XGA up to QXGA. The timing controllers reside on the panel and provide the interface between graphics controllers ...TFP7443
Vendor:Other Category:Other
The TFP7443 is a family of programmable timing controllers for TFT LCD panels supporting resolutions from XGA up to QXGA. The timing controllers reside on the panel and provide the interface between graphics controllers ...