© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:TOSHIBA Pack:TO-3P D/C:05+ Vendor:Other Category:Other
Mfg:ST Pack:SOP3.9 D/C:06+ Vendor:Other Category:Other
The TJM4558 is a high performance monolithic dual operational amplifier.The circuit combines all the outstanding features of the MC1458 and, in addition possesses three times the unity gain bandwidth of the industry stan...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The TJA1080 is a FlexRay transceiver, which is compatible with the FlexRay electrical physical layer specification V2.1 Rev. A (see Ref. 1). It is primarily intended for communication systems from 1 Mbit/s to 10 Mbit/s, ...
Vendor:Other Category:Other
The TJA1054T is designed as one kind of fault-tolerant CAN transceiver (interface between the protocol controller and the physical wires).It provides differential transmit capability but will switch in error conditions t...
Vendor:Other Category:Other
The TJA1054A is the interface between the protocol controller and the physical bus wires in a Controller Area Network (CAN). It is primarily intended for low-speed applications up to 125 kBaud in passenger cars. The devi...
Mfg:PHI Pack:SOP14 D/C:04+05+ Vendor:Other Category:Other
The TJA1054 is the interface between the protocol controller and the physical wires of the bus lines in a Control Area Network (CAN). It is primarily intended for low-speed applications, up to 125 kBaud, in passenger car...
Vendor:Other Category:Other
The TJA1053T is designed as one kind of fault-tolerant CAN transceiver (interface between the protocol controller and the physical wires).It provides differential transmit capability but will switch in error conditions t...
D/C:00 Vendor:Other Category:Other
The TJA1053 is the interface between the CAN protocol controller and the physical bus. It is primarily intended for low-speed applications, up to 125 kbaud, in passenger cars. The device provides differential transmit ca...
Mfg:PHILIPS Pack:SMD Vendor:Other Category:Other
The TJA1050 is the interface between the CAN protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.The TJA1050...
Vendor:Other Category:Other
The TJA1041A provides an advanced interface between the protocol controller and the physical bus in a Controller Area Network (CAN) node. The TJA1041A is primarily intended for automotive high-speed CAN applications (up ...
Mfg:PHILIPS Pack:SOP8 D/C:09+ Vendor:Other Category:Other
The TJA1040 is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. It is primarily intended for high speed applications, up to 1 MBaud, in passenger cars. The device provides...
Mfg:PHI Pack:N/A D/C:04+ Vendor:Other Category:Other
The TJA1020 is the interface between the LIN master/slave protocol controller and the physical bus in a Local Interconnect Network (LIN). It is primarily intended for in-vehicle sub-networks using baud rates from 2.4 up ...
Mfg:PHI Pack:SOP8S D/C:02+ Vendor:Other Category:Other
The TJA1020 is the interface between the LIN master/slave protocol controller and the physical bus in a Local Interconnect Network (LIN). It is primarily intended for in-vehicle sub-networks using baud rates from 2.4 up ...
Mfg:PHILIPS D/C:01+ Vendor:Other Category:Other
The TJA1010 is an octal low side driver for relays in automotive applications.
Vendor:Other Category:Other
The HTC TJ7660 is a monolithic CMOS power supply circuit which offers unique performance advantages over previously available devices.The TJ7660 performs supply voltage conversions from positive to negative for an input ...
Vendor:Other Category:Other
Vendor:Other Category:Other
TJ5-HT Toroid, High Current, High Temperature
Vendor:Other Category:Other
Vendor:Other Category:Other
The TJ49300 is a series of 3.0A high performance ultra low-dropout linear regulator ideal for powering core voltages of low-power microprocessors. The TJ49300 implements a dual supply configuration allowing for very low ...
Vendor:Other Category:Other
The TJ49150 is a series of 1.5A high performance ultra low-dropout linear regulator ideal for powering core voltages of low-power microprocessors. The TJ49150 implements a dual supply configuration allowing for very low ...
Vendor:Other Category:Other
The TJ4519 is a current mode switching regulator with an integrated switch, operating at 600kHz with separate sync and enable functions.
Vendor:Other Category:Other
TJ3-HT Toroid, High Current, High Temperature
Vendor:Other Category:Other
The TJ3966 series of high performance ultra low-dropout linear regulators operates from 2.5V to 6V input supply and provides ultra low-dropout voltage, high output current with low ground current. Wide range of preset ou...
Vendor:Other Category:Other
The TJ3965 series of high performance ultra low-dropout linear regulators operates from 2.5V to 6V input supply and provides ultra low-dropout voltage, high output current with low ground current. Wide range of preset ou...
Vendor:Other Category:Other
The TJ3964 series of high performance ultra low-dropoutlinear regulators operates from 2.5V to 6V input supplyand provides ultra low-dropout voltage, high outputcurrent with low ground current. Wide range of presetoutput...
Vendor:Other Category:Other
Vendor:Other Category:Other
The TJ2996 linear regulator is designed to meet the JEDEC SSTL-2 and SSTL-3 specifications for termination of DDR-SDRAM.The device contains a high-speed operational amplifier to provide excellent response to loadtransien...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The TJ1509A series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 2A load without additional transistor component. Due to reducing the number of external component, the board...
Vendor:Other Category:Other
Vendor:Other Category:Other
TJ1051 is a highly integrated solution for SMPS applications requiring constant voltage and constant current mode. TJ1051 integrates one voltage reference, two operational amplifiers (with ORed ouputs - common collectors...
Vendor:Other Category:Other
Vendor:Other Category:Other
TJ High Current, Vertical or Horizontal Mounting
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The TISPPBL2S is a dual forward-conducting buffered p-gate overvoltage protector. It is designed to protect the Ericsson Components PBL 3xxx family of SLICs (Subscriber Line Interface Circuits) against overvoltages on th...
Mfg:Bourns D/C:02 Vendor:Other Category:Other
The TISPPBL1 and TISPPBL2 are dual forward-conducting buffered p-gate overvoltage protectors. They are designed to protect the Ericsson Components SLICs (Subscriber Line Interface Circuits) against overvoltages on the te...
Vendor:Other Category:Other
The TISPPBL1 and TISPPBL2 are dual forward-conducting buffered p-gate overvoltage protectors. They are designed to protect the Ericsson Components SLICs (Subscriber Line Interface Circuits) against overvoltages on the te...
Mfg:BOURNS Pack:DIP-8P D/C:02+ Vendor:Other Category:Other
The TISPPBL1 and TISPPBL2 are dual forward-conducting buffered p-gate overvoltage protectors. They are designed to protect the Ericsson Components SLICs (Subscriber Line Interface Circuits) against overvoltages on the te...
Vendor:Other Category:Other
The TISPPBL1 and TISPPBL2 are dual forward-conducting buffered p-gate overvoltage protectors. They are designed to protect the Ericsson Components SLICs (Subscriber Line Interface Circuits) against overvoltages on the te...
Vendor:Other Category:Other
The TISPL758LF3 is an integrated combination of a symmetrical bidirectional overvoltage protector and an asymmetrical bidirectional overvoltage protector. It is designed to limit the peak voltages on the line terminals o...
Vendor:Other Category:Other
The TISP83121D is a dual-gate reverse-blocking unidirectional thyristor designed for the protection of dual-voltage ringing SLICs (Subscriber Line Interface Circuits) against overvoltages on the telephone line caused by ...
Mfg:BOURNS Pack:SIP-3P D/C:03+ Vendor:Other Category:Other
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on ...
Mfg:BOURNS Pack:SOP D/C:00+ Vendor:Other Category:Other
The TISP7xxxF3 series are 3-point overvoltage protectors designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting v...
Mfg:BOURNS Vendor:Other Category:Other
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on ...
Mfg:BOURNS Pack:SOP D/C:00+ Vendor:Other Category:Other
The TISP7xxxF3 series are 3-point overvoltage protectors designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting v...
Vendor:Other Category:Other
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on ...
Vendor:Other Category:Other
The TISP7xxxF3 series are 3-point overvoltage protectors designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting v...
Mfg:BOURNS D/C:01+ Vendor:Other Category:Other
The TISP7xxxF3 series are 3-point overvoltage protectors designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting v...
Vendor:Other Category:Other
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on ...
Vendor:Other Category:Other
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on ...
Vendor:Other Category:Other
The TISP7xxxF3 series are 3-point overvoltage protectors designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting v...
Vendor:Other Category:Other
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on ...
Mfg:BOURNS D/C:03+ Vendor:Other Category:Other
The TISP7xxxF3 series are 3-point overvoltage protectors designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting v...
Vendor:Other Category:Other
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on ...
Mfg:BOURNS D/C:01+ Vendor:Other Category:Other
The TISP7xxxF3 series are 3-point overvoltage protectors designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting v...
Vendor:Other Category:Other
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on ...
Vendor:Other Category:Other
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on ...
Vendor:Other Category:Other
The TISP6NTP2B has an array of four buffered P-gate forward conducting thyristors with twin commoned gates and a common anode connection. Each thyristor cathode has a separate terminal connection. An antiparallel anode-c...
Vendor:Other Category:Other
The TISP6L7591 is a dual forward-conducting buffered p-gate overvoltage protector. It is designed to protect monolithic SLICs (Subscriber Line Interface Circuits) against overvoltages on theelephone line caused by lightn...
Vendor:Other Category:Other
The TISP61CAP3 is a programmable overvoltage protector designed to protect SLIC applications against lightning and transients induced by ac power lines. Normally the VGG (Gate) terminal will be connected to the negative ...
Mfg:BOURNS Pack:DIP-8P D/C:02+ Vendor:Other Category:Other
The TISP61511D and TISP61512P are dual forward-conducting buffered p-gate overvoltage protectors. They are designed to protect monolithic Subscriber Line Interface Circuits,SLICs, against overvoltages on the telephone li...
Mfg:BOURNS D/C:06+ Vendor:Other Category:Other
The TISP61511D and TISP61512P are dual forward-conducting buffered p-gate overvoltage protectors. They are designed to protect monolithic Subscriber Line Interface Circuits,SLICs, against overvoltages on the telephone li...
Vendor:Other Category:Other
The TISP61089S is a dual forward-conducting buffered p-gate overvoltage protector. It is designed to protect monolithic SLICs (Subscriber Line Interface Circuits) against overvoltages on the telephone line caused by ligh...
Vendor:Other Category:Other
The TISP61089HDM is a dual forward-conducting buffered p-gate thyristor (SCR) overvoltage protector. It is designed to protect monolithic SLICs (Subscriber Line Interface Circuits) against overvoltages on the telephone l...
Mfg:TI Pack:SOP/8 D/C:02+ Vendor:Other Category:Other
The TISP61089B is a dual forward-conducting buffered p-gate thyristor (SCR) overvoltage protector. It is designed to protect monolithic SLICs (Subscriber Line Interface Circuits) against overvoltages on the telephone lin...
Vendor:Other Category:Other
The TISP61089AS is a dual forward-conducting buffered p-gate overvoltage protector. It is designed to protect ringing SLICs (Subscriber Line Interface Circuits) against overvoltages on the telephone line caused by light...
Mfg:B(BOURNS) Pack:SOP8 D/C:06+ Vendor:Other Category:Other
The TISP61089 is a dual forward-conducting buffered p-gate overvoltage protector. It is designed to protect monolithic SLICs (Subscriber Line Interface Circuits) against overvoltages on the telephone line caused by light...
D/C:07+ Vendor:Other Category:Other
The TISP61089 is a dual forward-conducting buffered p-gate overvoltage protector. It is designed to protect monolithic SLICs (Subscriber Line Interface Circuits) against overvoltages on the telephone line caused by light...
Mfg:TI D/C:07+ Vendor:Other Category:Other
The TISP61060 is a dual forward-conducting buffered p-gate overvoltage protector. It is designed to protect monolithic SLICs (Subscriber Line Interface Circuits), against overvoltages on the telephone line caused by ligh...
Vendor:Other Category:Other
The TISP61060 is a dual forward-conducting buffered p-gate overvoltage protector. It is designed to protect monolithic SLICs (Subscriber Line Interface Circuits), against overvoltages on the telephone line caused by ligh...
Vendor:Other Category:Other
These devices TISP5190H3BJ are designed to limit overvoltages on the telephone and data lines. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to th...
Vendor:Other Category:Other
These devices TISP5xxxH3BJ are designed to limit overvoltages on the telephone and data lines. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to th...
Vendor:Other Category:Other
These devices TISP5115H3BJ are designed to limit overvoltages on the telephone and data lines. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to th...
Vendor:Other Category:Other
These devices TISP5xxxH3BJ are designed to limit overvoltages on the telephone and data lines. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to th...
Vendor:Other Category:Other
These devices TISP5095H3BJ are designed to limit overvoltages on the telephone and data lines. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to th...
Vendor:Other Category:Other
These devices TISP5xxxH3BJ are designed to limit overvoltages on the telephone and data lines. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to th...
Vendor:Other Category:Other
These devices TISP5070H3BJ are designed to limit overvoltages on the telephone and data lines. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to th...
Vendor:Other Category:Other
This device TISP4C220H3BJ is designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone ...
Vendor:Other Category:Other
This device TISP4C180H3BJ is designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone ...
Vendor:Other Category:Other
This device TISP4C145H3BJ is designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone ...
Vendor:Other Category:Other
This device TISP4C125H3BJ is designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone ...
Vendor:Other Category:Other
These devices TISP4xxxH3LM are designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephon...
Mfg:Power Innovation D/C:02 Vendor:Other Category:Other
These devices TISP4xxxM3BJ are designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephon...
Mfg:BOURNS D/C:04+ Vendor:Other Category:Other
These devices TISP4xxxH3LM are designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephon...
Vendor:Other Category:Other
These devices TISP4xxxH3BJ are designed to limit overvoltages on the telephone line. Overvoltages are normally caused bya.c. power system or lightning flash disturbances which are induced or conducted on to the telephone...
Vendor:Other Category:Other
These devices TISP4395L3AJ are designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephon...
Vendor:Other Category:Other
The range of TISP4xxxJ3BJ devices are designed to limit overvoltages on telecom lines. The TISP4xxxJ3BJ is primarily designed to address GR-1089-CORE compliance on data transmission lines with d.c. power feeding. When ov...
Mfg:BOURNS Pack:TO-92 D/C:03+ Vendor:Other Category:Other
These devices TISP4380F3LM are designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephon...
Mfg:B(BOURNS) Pack:SOP8 D/C:06+ Vendor:Other Category:Other
These high voltage symmetrical transient voltage suppressor devices TISP4380F3 are designed to protect two wire telecommunication applications against transients caused by lightning strikes and a.c. power lines. Offered ...
Vendor:Other Category:Other
These devices TISP4360MMBJ are designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephon...
Vendor:Other Category:Other
These devices TISP4360MMAJ are designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephon...
Vendor:Other Category:Other
These devices TISP4xxxM3BJ are designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephon...
Vendor:Other Category:Other
The TISP4360H3BJ is designed to limit overvoltages on equipment used for telephone lines carrying POTS (Plain Old Telephone System) and ADSL (Asymmetrical Digital Subscriber Line) signals. TISP4360H3BJ a.c. overload limi...
Mfg:Power Innovation D/C:02 Vendor:Other Category:Other
These devices TISP4350MMBJ are designed to limit overvoltages on the telephone line. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephon...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.