© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:COMPENSATED Pack:LL34 D/C:05+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:Vishay D/C:08+ Vendor:Other Category:Other
Thick Film Chip Dividers, High Voltage CDHV 2512
Vendor:Other Category:Other
・4.0*4.0mm Max.(L*W), 1.0mm Max. Height.・CDH38D09 Inductance range: 1.2~22H・Rated current range: 0.45~1.35A・In addition to the standard versions of inductors shown here, custom inductors are a...
Vendor:Other Category:Other
・4.0*4.0mm Max.(L*W), 0.85mm Max. Height.・Inductance range: 1.0~10H・CDH36D07 Rated current range: 0.36~1.21A・In addition to the standard versions of inductors shown here,custom inductors are a...
Vendor:Other Category:Other
Silicon Schottky Diode Chips
Skyworks silicon Schottky diode chips CDF7623 Series are intended for use as detector and mixer devices in hybrid integrated circuits at frequencies from below 100 MHz to higher than 40 GHz....
Vendor:Other Category:Other
Silicon Schottky Diode Chips
Skyworks silicon Schottky diode chips CDF7621 Series are intended for use as detector and mixer devices in hybrid integrated circuits at frequencies from below 100 MHz to higher than 40 GHz....
Vendor:Other Category:Other
・10.5*9.5mm Max. (L*W), 10.0mm Max. Height・CDEPI1010NP-5R0PC Inductance Range: 5.0H~22H; Rated Current Range: 2.8~7.1 A
Vendor:Other Category:Other
・14.9*14.9mm Max.(L*W), 8.0mm Max. Height.・Standard type, Low D.C.R Type and High Power Type are available.・CDEP147 Inductance range: 0.5~12H(Low D.C.R type); 0.4~9.5H (standard type );0.3~7.3H(High ...
Vendor:Other Category:Other
・12.9*12.9mm Max.(L*W), 4.0mm Max. Height.・Inductance Range:0.5~7.7H(Standard Type) ,0.35~5.6H(High Power Type)・CDEP12D38 Rated current range: 4.8~19.2A(Standard Type ),6.8~27.2A(High Power Type)....
Vendor:Other Category:Other
By using the square wire, power inductors CDEP105 can be used for large currents with low profile and low resistance.
Vendor:Other Category:Other
Silicon Schottky Barrier Diodes: Packaged, Bondable Chips and Beam-Leads
Skyworks packaged, beam-lead and chip Schottky barrier detector diodes CDE7618 Series are designed for applications through 40 GHz in Ka band. The...
Vendor:Other Category:Other
Vendor:Other Category:Other
The CDCVF855 is a high-performance, low-skew,low-jitter, zero-delay buffer that distributes a differential clock input pair (CLK, CLK ) to 4 differential pairs of clock outputs (Y[0:3], Y[0:3] ) and one differential pair...
Vendor:Other Category:Other
The CDCVF2509A is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. ...
Vendor:Other Category:Other
The CDCVF2505 is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the output clocks (1Y[0 3] and CLKOUT) to the input clock sig...
Pack:SOP48 D/C:06+ Vendor:Other Category:Other
The CDCV857A is a high-performance, low-skew, low-jitter zero delay buffer that distributes a differential clock input pair (CLK, CLK) to ten differential pairs of clock outputs (Y[0:9], Y[0:9]) and one differential pair...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC CLOCK BUFFER GP/PCI-X 8TSSOPThe CDCV304PWRG4 is one member of the CDCV304 series.The CDCV304 is a high-performance, low-skew, general-purpose PCI-X compliant clock buffer. It distributes one input clock signal (CLKIN) to the output clocks (1Y[0:3])...
Vendor:Other Category:Other
The CDCU877B is a high-performance, low-jitter, low-skew, zero-delay buffer that distributes a differential clock input pair (CK, CK ) to ten differential pairs of clock outputs (Yn, Yn ) and to one differential pair of ...
Vendor:Other Category:Other
The CDCU2A877 is a high-performance, low-jitter, low-skew, zero-delay buffer that distributes a differential clock input pair (CK, CK ) to 10 differential pairs of clock outputs (Yn, Yn ) and to one differential pair of ...
Vendor:Other Category:Other
The CDCS503 is a spread spectrum capable, LVCMOS Input Clock Buffer with selectable frequency multiplication.It shares major functionality with the CDCS502 but utilizes a LVCMOS input stage instead of the crystal input s...
Vendor:Other Category:Other
The CDCS502 is a spread spectrum capable, fundamental mode crystal oscillator with selectable frequency multiplication.It features an advanced gain controlled fundamental mode crystal oscillator stage with a built-in loa...
Vendor:Other Category:Other
The CDCS501 is a spread spectrum capable, LVCMOS Input Clock Buffer for EMI reduction.The device is designed to counter common EMI problems in modern electronic designs.It accepts a 3.3V LVCMOS signal at the input and sp...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The Direct Rambus clock generator (DRCG) CDCR81 provides the necessary clock signals to support a Direct Rambus memory subsystem. CDCR81 includes signals to synchronize the Direct Rambus channel clock to an external syst...
Vendor:Other Category:Other
The CDCP1803 clock driver distributes one pair of differential clock inputs to three pairs of LVPECL differential clock outputs Y[2:0] and Y[2:0] with minimum skew for clock distribution. The CDCP1803 is specifically des...
Vendor:Other Category:Other
The CDCP1803 clock driver distributes one pair of differential clock inputs to three pairs of LVPECL differential clock outputs Y[2:0] and Y[2:0], with minimum skew for clock distribution. The CDCP1803 is specifically de...
Vendor:Other Category:Other
The CDCM7005-SP is a high-performance, low phase noise and low skew clock synchronizer that synchronizes a VCXO (voltage controlled crystal oscillator) or VCO (voltage controlled oscillator) frequency to one of the two r...
Vendor:Other Category:Other
The CDCM61004 is a highly versatile, low-jitter frequency synthesizer that can generate four low-jitter clock outputs, selectable between low-voltage positive emitter coupled logic (LVPECL), low-voltage differential sign...
Vendor:Other Category:Other
The CDCM61002 is a highly versatile, low-jitter frequency synthesizer that can generate two low-jitter clock outputs, selectable between low-voltage positive emitter coupled logic (LVPECL), low-voltage differential signa...
Vendor:Other Category:Other
The CDCM1804 clock driver distributes one pair of differential clock inputs to three pairs of LVPECL differential clock outputs Y[2:0]and <a href="#"style="text-decoration:overline;">Y[2:0]</a>, with minimum ...
Vendor:Other Category:Other
The CDCLVP215 clock driver distributes two times one differential clock pair of LVPECL, (CLKA, CLKB) to 5 pairs of differential LVPECL clock (QA0..QA4, QB0..QB4) outputs with minimum skew for clock distribution. The CDCL...
Vendor:Other Category:Other
The CDCLVP2108 is a highly versatile, low additive jitter buffer that can generate 16 copies of LVPECL clock outputs from two LVPECL, LVDS, or LVCMOS inputs for a variety of communication applications. It has a maximum c...
Vendor:Other Category:Other
The CDCLVP2106 is a highly versatile, low additive jitter buffer that can generate 16 copies of LVPECL clock outputs from two LVPECL, LVDS, or LVCMOS inputs for a variety of communication applications. It has a maximum c...
Vendor:Other Category:Other
The CDCLVP2104 is a highly versatile, low additive jitter buffer that can generate 16 copies of LVPECL clock outputs from two LVPECL, LVDS, or LVCMOS inputs for a variety of communication applications. It has a maximum c...
Vendor:Other Category:Other
The CDCLVP2102 is a highly versatile, low additive jitter buffer that can generate 16 copies of LVPECL clock outputs from two LVPECL, LVDS, or LVCMOS inputs for a variety of communication applications. It has a maximum c...
Vendor:Other Category:Other
The CDCLVP1216 is a highly versatile, low additive jitter buffer that can generate 16 copies of LVPECL clock outputs from two LVPECL, LVDS, or LVCMOS inputs for a variety of communication applications. It has a maximum c...
Vendor:Other Category:Other
The CDCLVP1212 is a highly versatile, low additive jitter buffer that can generate 12 copies of LVPECL clock outputs from one of two selectable LVPECL,LVDS, or LVCMOS inputs for a variety of communication applications. I...
Vendor:Other Category:Other
The CDCLVP1208 is a highly versatile, low additive jitter buffer that can generate eight copies of LVPECL clock outputs from one of two selectable LVPECL,LVDS, or LVCMOS inputs for a variety of communication applications...
Vendor:Other Category:Other
The CDCLVD2108 clock buffer distributes two clock inputs (IN0, IN1) to a total of 16 pairs of differential LVDS clock outputs (OUT0, OUT15). Each buffer block consists of one input and 8 LVDS outputs. The inputs can eith...
Vendor:Other Category:Other
The CDCLVD2106 is specifically designed for driving 50- transmission lines. In case of driving the inputs in single ended mode, the appropriate bias voltage (VAC_REF) should be applied to the unused negative input pin.
...
Vendor:Other Category:Other
The CDCLVD2104 clock buffer distributes two clock inputs (IN0, IN1) to a total of 8 pairs of differential LVDS clock outputs (OUT0, OUT7). Each buffer block consists of one input and 4 LVDS outputs. The inputs can either...
Vendor:Other Category:Other
The CDCLVD2102 clock buffer distributes two clock inputs (IN0, IN1) to a total of 4 pairs of differential LVDS clock outputs (OUT0, OUT3). Each buffer block consists of one input and 2 LVDS outputs. The inputs can either...
Vendor:Other Category:Other
The CDCLVD1216 clock buffer distributes one of two selectable clock inputs (IN0, IN1) to 16 pairs of differential LVDS clock outputs (OUT0, OUT15) with minimum skew for clock distribution. The CDCLVD1216 can accept two c...
Vendor:Other Category:Other
The CDCLVD1213 clock buffer distributes an input clock to 4 pairs of differential LVDS clock outputs with low additive jitter for clock distribution. The input can either be LVDS, LVPECL, or CML.
Features of the CDCLVD1...
Vendor:Other Category:Other
The CDCLVD1212 clock buffer distributes one of two selectable clock inputs (IN0, IN1) to 12 pairs of differential LVDS clock outputs (OUT0, OUT11) with minimum skew for clock distribution. The CDCLVD1212 can accept two c...
Vendor:Other Category:Other
The CDCLVD1208 clock buffer distributes one of two selectable clock inputs (IN0, IN1) to 8 pairs of differential LVDS clock outputs (OUT0, OUT7) with minimum skew for clock distribution. The CDCLVD1208 can accept two clo...
Vendor:Other Category:Other
The CDCLVD110A clock driver distributes one pair of differential LVDS clock inputs (either CLK0 or CLK1) to 10 pairs of differential clock outputs (Q0Q9) with minimum skew for clock distribution. The CDCLVD110A is specif...
Vendor:Other Category:Other
The CDCLVC1112 is a modular, high-performance, low-skew, general purpose clock buffer family from Texas Instruments.The whole family is designed with a modular approach in mind. It is intended to round up TI's series of ...
Vendor:Other Category:Other
The CDCL1810 is a high-performance clock distributor. The programmable dividers, P0 and P1 give a high flexibility to the ratio of the outpu frequency to the input frequency:F OUT = F IN /P Where:P (P0,P1) = 1, 2, 4, 5, ...
Vendor:Other Category:Other
The CDCFR83A has a fail-safe power up initialization state-machine which supports proper operation under all power up conditions.The CDCFR83A is characterized for operation over free-air temperatures of 40 ° C to 85 ° C...
Vendor:Other Category:Other
The CDCF5801A provides clock multiplication from a reference clock (REFCLK) signal with the unique capability to delay or advance the CLKOUT/CLKOUTB with steps of only 1.3 mUI through a phase aligner. For every rising ed...
Vendor:Other Category:Other
The CDCEL949 is modular PLL-based low cost, high-performance, programmable clock synthesizers, multipliers and dividers. It generate up to 9 output clocks from a single input frequency. Each output can be programmed in-s...
Vendor:Other Category:Other
The CDCEL937-Q1 is modular PLL-based low-cost high-performance programmable clock synthesizers, multipliers, and dividers. It generates up to seven output clocks from a single input frequency. Each output can be programm...
Vendor:Other Category:Other
The CDCEL913-Q1 modular PLL-based low-cost, high-performance, programmable clock synthesizers, multipliers, and dividers. They generate up to three output clocks from a single input frequency.Each output can be programme...
Vendor:Other Category:Other
The CDCEL913 is modular PLL-based low-cost, high-performance, programmable clock synthesizers, multipliers, and dividers. They generate up to 3 output clocks from a single input frequency. Each output can be programmed i...
Vendor:Other Category:Other
The CDCE72010 is a high-performance, low phase noise, and low skew clock synchronizer that synchronizes a VCXO (Voltage Controlled Crystal Oscillator) or VCO (Voltage Controlled Oscillator) frequency to one of two refere...
Vendor:Other Category:Other
The CDCE706 is one of the smallest and powerful PLL synthesizer / multiplier / divider available today.Despite its small physical outlines, the CDCE906 is flexible. It has the capability to produce an almost independent ...
Vendor:Other Category:Other
The CDCE18005 is a high performance clock generator and distributor featuring a high degree of configurability via a SPI interface, and programmable start up modes determined by on-board EEPROM.Specifically tailored for ...
Mfg:TEXAS Pack:SOP Vendor:Other Category:Other
The CDC9842 is a high-performance clock synthesizer/driver that generates the system clocks necessary to support PentiumE/82430X/82430VX and PentiumPro 82440FX chipsets. Four host-clock outputs (HCLKn) are programmable t...
Mfg:TI Pack:SOP D/C:03+ Vendor:Other Category:Other
The CDC9841 is a high-performance clock synthesizer/driver that generates all required clock signals necessary for a high-performance PC motherboard. The four central processing unit (CPU) clock outputs (PCLKn) are progr...
Vendor:Texas Instruments (VA) Category:Integrated Circuits (ICs)
IC DIFF CLOCK SYNTH/DRVR 48TSSOPThe CDC950DGGR is one member of the CDC950 series.It has the following features including (1)generates clocks for next generation microprocessors;(2)uses a 14.318-MHz crystal input to generate multiple output frequencies...
Mfg:TI Pack:SMD48 Vendor:Other Category:Other
The CDC950 is a differential clock synthesizer/driver that generates HCLK/HCLK, CLK33, 3V48, and REFCLK system clock signals to support a computer system with next generation processors and double data rate (DDR) memory ...
Vendor:Other Category:Other
The CDC930 is a differential clock synthesizer/ driver that generates HCLK/HCLK, 3VMREF/ 3VMREF, PCI, 3V66, 3V48, REF system clock signals to support a computer system with a Pentium®4 microprocessor and a Direct Ram...
Mfg:TI Pack:SSOP-56 Vendor:Other Category:Other
The CDC925 is a clock synthesizer/driver that generates system clocks necessary to support Intel Pentium III systems on CPU, CPU_DIV2, 3V66, PCI, APIC, 48MHz, and REF clock signals. All CDC925 output frequencies are gene...
Mfg:TI Pack:00+ D/C:SSOP48 Vendor:Other Category:Other
The CDC922 is a clock synthesizer/driver that generates CPU, CPU_DIV2, 3V66, PCI, APIC, 48MHz, and REF system clock signals to support computer systems with a single Pentium III class microprocessor. All CDC922 output fr...
Vendor:Other Category:Other
The CDC9171 is designed as a high-performance clock synthesizer that generates the required clock signals needed for a DVD system. It generates all output frequencies from an 18.432MHz crystal.CDC9171 has eight features....
Vendor:Other Category:Other
Zero Bias Silicon Schottky Barrier Detector Diodes
Skyworks series of packaged, beam-lead and chip zero bias Schottky barrier detector diodes CDC7631 Series are designed for applications through K band. The choice of ba...
Vendor:Other Category:Other
Zero Bias Silicon Schottky Barrier Detector Diodes
Skyworks series of packaged, beam-lead and chip zero bias Schottky barrier detector diodes CDC7630 Series are designed for applications through K band. The choice of ba...
Vendor:Other Category:Other
The CDC330 is a high-performance, low-skew clock driver. It is specifically designed for applications requiring output signals at both the primary clock frequency and one-half the primary clock frequency.CDC330 contains ...
Mfg:SOP-16 Pack:TI D/C:2004+ Vendor:Other Category:Other
The CDC328 contains a clock-driver circuit that distributes one input signal to six outputs with minimum skew for clock distribution. Through the use of the polarity-control inputs (T/C), various combinations of true and...
Vendor:Other Category:Other
The CDC318 is a high-performance clock buffer that distributes one input (A) to 18 outputs (Y) with minimum skew for clock distribution. The CDC318operates from a 3.3-V power supply, and is characterized for operation fr...
Vendor:Other Category:Other
The CDC2510A is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. It...
Vendor:Other Category:Other
The CDC2509A is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. It...
Mfg:TI Pack:2000 Vendor:Other Category:Other
The CDC2351 is a high-performance clock-driver circuit that distributes one input (A) to ten outputs (Y) with minimum skew for clock distribution. The output-enable (OE) input disables the outputs to a high-impedance sta...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC DUAL 1-TO-4 CLK-DRVR 20-SOICThe CDC208DWRG4 is one member of the CDC208 series.The CDC208 contains dual clock-driver circuits that fanout one input signal to four outputs with minimum skew for clock distribution (see Figure 2). The device also offe...
Vendor:Comchip Technology (VA) Category:Discrete Semiconductor Products
DIODE SCHOTTKY 200MA 45V 0603
Vendor:Comchip Technology (VA) Category:Discrete Semiconductor Products
DIODE SCHOTTKY 30V 100MA 0603
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.