© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The XRT73R06 is a six channel fully integrated LineInterface Unit (LIU) featuring EXAR's R3 Technology (Reconfigurable, Relayless, Redundancy) for E3/DS3/STS-1 applications. The LIU incorporates 6 independent Receivers, ...
Vendor:Other Category:Other
DescriptionThe XRT73LC04A, 4-Channel, DS3/E3/STS-1 Line Interface Unit is a low power CMOS version of the XRT73L04A and consists of four independent line transmitters and receivers integrated on a single chip designed fo...
Vendor:Other Category:Other
The XRT73LC03A, 3-Channel, DS3/E3/STS-1 Line Interface Unit is a low power CMOS version of the XRT73L03A and consists of three independent line transmitters and receivers integrated on a single chip designed for DS3, E3 ...
Vendor:Other Category:Other
The XRT73LC00A DS3/E3/STS-1 Line Interface Unit is a low power CMOS version of the XRT73L00A and consists of a line transmitter and receiver integrated on a single chip and is designed for DS3, E3 or SONET STS-1 applicat...
Vendor:Other Category:Other
The XRT73LC00 DS3/E3/STS-1 Line Interface Unit is a low power CMOS version of the XRT73L00A and consists of a line transmitter and receiver integrated on a single chip and is designed for DS3, E3 or SONET STS-1 applicati...
Vendor:Other Category:Other
The XRT73L06 is a Six-Channel fully integrated Line Interface Unit (LIU) for E3/DS3/STS-1 applications. It incorporates six independent Receivers and Transmitters in a single 208-pin QFP package.
Each channel of the X...
Vendor:Other Category:Other
The XRT73L04B, 4-Channel, DS3/E3/STS-1 Line Interface Unit is a low power CMOS version of the XRT73L04A and consists of four independent line transmitters and receivers integrated on a single chip designed for DS3, E3 ...
Vendor:Other Category:Other
The XRT73L04A, 4-Channel, DS3/E3/STS-1 Line Interface Unit is an improved version of the XRT73L04 and consists of four independent line transmitters and receivers integrated on a single chip designed for DS3, E3 or SONET...
Vendor:Other Category:Other
The XRT73L03B, 3-Channel, DS3/E3/STS-1 Line In-terface Unit is a low power CMOS version of the XRT73L03A and consists of three independent line transmitters and receivers integrated on a single chip designed for DS3, E3 ...
Vendor:Other Category:Other
The XRT73L03 is a 3-Channel, E3/DS3/STS-1 Line Interface Unit designed for E3, DS3 or SONET STS-1applications and consists of three independent line transmitters and receivers integrated on a single chip. Each channel of...
Vendor:Other Category:Other
The XRT73L02M is a two-channel fully integrated Line Interface Unit (LIU) for E3/DS3/STS-1 applications. It incorporates independent Receivers, Transmitters in a single 100 pin TQFP package.The XRT73L02M can be configure...
Vendor:Other Category:Other
The XRT73L00A DS3/E3/STS-1 Line Interface Unit is an improved version of the XRT73L00 and consists of a line transmitter and receiver integrated on a single chip and is designed for DS3, E3 or SONET STS-1 applications. X...
Vendor:Other Category:Other
Exar's XRT7300 DS3/E3/STS-1 transceiver is an integrated solution which combines and enhances the present XRT7295/XRT7298 two-chip solution. The device contains both the receiver and transmitter to support the data rat...
Vendor:Other Category:Other
Further cementing its position as an industry-leading provider of innovative User Network Interfaces (UNIs), the XRT72L71/73/74 series is ideal for WANs, the dominant networking infrastructure. In single, dual, and qua...
Vendor:Other Category:Other
Innovative silicon solutions are a hallmark of Exar's products for the communications markets. Exar offers a full line of multi-channel (1, 2, 3, 4, 6, & 8) framers for DS3/E3 network access applications including ...
Vendor:Other Category:Other
Innovative silicon solutions are a hallmark of Exar's products for the communications markets. Exar offers a full line of multi-channel (1, 2, 3, 4, 6, & 8) framers for DS3/E3 network access applications including ...
Vendor:Other Category:Other
The XRT72L54, 4 Channel DS3/E3 Framer IC is designed to accept "User Data" from the Terminal Equipment and insert this data into the "payload" bitfields within an "outbound" DS3/E3 Data Stream. Further, the Framer IC is ...
Vendor:Other Category:Other
Description
Innovative silicon solutions are a hallmark of Exar's products for the communications markets. Exar offers a full line of multi-channel (1, 2, 3, 4, 6, & 8) framers for DS3/E3 network access applications...
Vendor:Other Category:Other
Innovative silicon solutions are a hallmark of Exar's products for the communications markets. Exar offers a full line of multi-channel (1, 2, 3, 4, 6, & 8) framers for DS3/E3 network access applications including ...
Vendor:Other Category:Other
Innovative silicon solutions are a hallmark of Exar's products for the communications markets. Exar offers a full line of multi-channel (1, 2, 3, 4, 6, & 8) framers for DS3/E3 network access applications including ...
Vendor:Other Category:Other
The XRT72L13 is a fully integrated, low power, Multiplexer/ Framer IC which performs Multiplexing/Demutiplexing of 28 DS1or 21 E1 signals into/from a DS3 signal with either M13 or C-bit parity frame format, performs Clea...
Vendor:Other Category:Other
The XRT7298W is designed as one kind of fully integrated PCM line driver IC intended for DS3 or E3 applications. This device can also be used for transmitting SONET STS-1 signals over coaxial cable. The IC is designed to...
Vendor:Other Category:Other
The XRT7298 device is a fully integrated PCM line driver IC intended for DS3, E3 or SONET STS-1 applications. Markets for the device includedigital cross connect system, CSU/DSU equipment, PCM test equipment and fiber ...
Vendor:Other Category:Other
The XR-T7296 is a fully integrated PCM Line Driver IC intended for DS3 (44.736Mbps) or E3 (34.368Mbps) applications. It can also be used for transmitting SONET STS-1 (51.84Mbps) signals over coaxial cable. The IC is desi...
Vendor:Other Category:Other
The XRT7296 is designed as one kind of fully integrated PCM line driver IC intended for DS3 or E3 applications. This device can also be used for transmitting SONET STS-1 signals over coaxial cable. The IC is designed to ...
Vendor:Other Category:Other
The XRT7295AT DS3/SONET STS-1 integrated linereceiver is a fully integrated receive interface that terminates a bipolar DS3 (44.736Mbps) or Sonet STS-1 (51.84Mbps) signal transmitted over coaxial cable. (See Figure 13)...
Mfg:EXAR Pack:PLCC D/C:2001 Vendor:Other Category:Other
The XRT7295AEIW DS3/SONET STS-1 integrated line receiver is a fully integrated receive interface that terminates a bipolar DS3 (44.736Mbps) or Sonet STS-1 (51.84Mbps) signal transmitted over coaxial cable. (See Figure ...
Vendor:Other Category:Other
Description
The XRT7295AE DS3/SONET STS-1 integrated linereceiver is a fully integrated receive interface that terminates a bipolar DS3 (44.736Mbps) or Sonet STS-1 (51.84Mbps) signal transmitted over coaxial cable.
The...
Vendor:Other Category:Other
The XR-T7295 DS3/SONET STS-1 integrated line receiver is a fully integrated receive interface that terminates a bipolar DS3 (44.736Mbps) or Sonet STS-1 (51.84Mbps) signal transmitted over coaxial cable. (See Figure 13).T...
Vendor:Other Category:Other
The XR-T7288 CEPT1 Line Interface is an integrated circuit that provides a 2.048 Mbits/s line interface to either twisted-pair or coaxial cable as specified in CCITT requirements G.703, G.823, I.431, G.732, and G.735 G.7...
Vendor:Other Category:Other
The XRT7288 is designed as one kind of CEPT1 line interface which is an integrated circuit that provides a 2.048 Mbits line interface to either twisted pair or coaxial cable as specified in CCITT requirements G.703, G.82...
Vendor:Other Category:Other
The XRT7250 DS3/E3 Framer IC is designed to accept "User Data" from the Terminal Equipment and insert this data into the "payload" bit-fields within an "outbound" DS3/E3 Data Stream. Further, the Framer IC is also design...
Vendor:Other Category:Other
Data transmission accuracy requires sending and receiving clean, error-free data. Jitter is caused by many factors including cross-talk noise, line interface/signal distortion, or even an imperfect timing recovery circ...
Vendor:Other Category:Other
The XRT71D03 is a three channel, single chip Jitter Attenuator, that meets the Jitter transfer characteristics requirements specified in the ETSI TBR-24, Bellcore GR-499 and GR-253 standards.In addition, the XRT71D03 als...
Vendor:Other Category:Other
The XRT71D00 is a single channel, single chip Jitter Attenuator, that meets the Jitter requirements specified in the ETSI TBR-24, Bellcore GR-499 and GR- 253 standards.In addition, the XRT71D00 also meets the Jitter and ...
Vendor:Other Category:Other
Vendor:Other Category:Other
The XRT6166 is a CMOS device which contains the digital circuitry necessary to interface both directions of a 64kbps data stream to 2.048Mbps transmit and receive PCM time-slots. The XRT6166 and the companion XRT6164 l...
Vendor:Other Category:Other
The XR-T6165 is a CMOS device which contains the digital circuitry necessary to interface both directions of a 64kbps data stream to 2.048Mbps transmit and rec ive PCM time-slots. The XR-T6165 and the companion XR-T6164 ...
Vendor:Other Category:Other
The XRT6165 is a CMOS device which contains the digital circuitry necessary to interface both directions of a 64kbps data stream to 2.048Mbps transmit and receive PCM time-slots. The XRT6165 and the companion XRT6164 l...
Vendor:Other Category:Other
DescriptionThe XRT6164A is a bipolar analog chip intended for general purpose line interface applications at bit rates up to 1.544Mbps (T1). It contains both receive and transmit circuitry in a 16-pin dual-in-line plasti...
Vendor:Other Category:Other
The XRT6164 is a bipolar analog chip intended forgeneral purpose line interface applications at bit rates up to 1.544Mbps (T1). It contains both receive and transmit circuitry in a 16-pin dual-in-line plastic package. Th...
Vendor:Other Category:Other
The XRT59L921 is an optimized twenty-one channel, E1, line interface unit, fabricated using low power CMOS technology. The device contains twenty-one independent E1 channels. It is primarily targeted towards the SDH mult...
Vendor:Other Category:Other
The XRT59L91 and XRT5997 are primarily targeted toward manufacturers of E1 equipment. Some of the primary target applications include telecommunications manufacturers utilizing multi-channel line cards, as well as, netwo...
Vendor:Other Category:Other
DescriptionThe XRT5997 is a seven-channel E1 Line Interface Unit (LIU), and, along with the XRT59L91 single-channel E1 transceiver, provide a wide array of design options, and capabilities for leading-edge, high-speed da...
Vendor:Other Category:Other
The XRT5897 is an optomized seven channel 3.3V line interface unit fabricated using low power CMOS technology. The device contains seven independent E1 channels. It is primarily targeted toward SDH multiplexers that acco...
Vendor:Other Category:Other
The XRT5894 is an optimized four channel 3.3V line interface unit fabricated using low power CMOS technology. The device contains four independent E1 channels. Each channel performs the driver and receiver functions nece...
Vendor:Other Category:Other
The XRT5794ES demo board is a 4.75" x 9.75" double-sided circuit card that provides the support circuitry necessary for a comprhensive evaluation of the XR-T5794 CMOS Quad E1 Line Interface IC. three board-mountedDIP swi...
Vendor:Other Category:Other
The XR-T5794 is an optimized line interface unit, built using low power CMOS technology. The device contains four independent E1 channels for primary rate, PCM applications up to 2.048Mbps. Each channel performs the driv...
Vendor:Other Category:Other
The XRT5794 is an optimized line interface unit, built using low power CMOS technology. The device contains four independent E1 channels for primary rate, PCM applications up to 2.048Mbps. Each channel performs the drive...
Vendor:Other Category:Other
The XR-T5793 is an optimized line interface unit, built using low power CMOS technology. This device contains four independent E1 channels for primary rate, PCM applications up to 2.048Mbps. Each channel performs the dri...
Vendor:Other Category:Other
The XRT5793 is an optimized line interface unit, built using low power CMOS technology. This device contains four independent E1 channels for primary rate, PCM applications up to 2.048Mbps. Each channel performs the driv...
Vendor:Other Category:Other
The XR-T56L85 is a PCM line interface chip. It consists of both transmit and receive circuitry in a DIL 18 pin package. The maximum bit rate the chip can handle is 2.048 Mbps and the signal level to the received can be a...
Vendor:Other Category:Other
The XRT56L85 is a PCM line interface chip. It consists of both transmit and receive circuitry in a DIL 18 pin package. The maximum bit rate the chip can handle is 2.048 Mbps and the signal level to the received can be at...
Vendor:Other Category:Other
The XR-T56L22 is a very low power monolithic repeater/ receiver IC designed for PCM carrier systems operating between 1.544Mbps and 2.37Mbps. The IC provides all the active circuitry required to implement one side of a P...
Vendor:Other Category:Other
The XR-T5683A is a PCM line interface chip consisting of both transmit and receive circuitry. This device is offered in a plastic dual in-line (PDIP) or in a surface mount package (SOIC). The maximum bit rate of the chip...
Vendor:Other Category:Other
The XRT5683A is a PCM line interface chip consisting of both transmit and receive circuitry. This device is offered in a plastic dual in-line (PDIP) or in a surface mount package (SOIC). The maximum bit rate of the chi...
Vendor:Other Category:Other
The XR-T5675 is a bipolar monolithic dual line driver designed to drive PCM lines up to a 10 MBPS rate.The device is powered from a single 5 V±5% source.Its current comsumption is 14 mA (typical) and the output can be pu...
Vendor:Other Category:Other
The XRT4500 is a fully integrated multiprotocol serial interface. It supports all of the popular serial communication interface standards such as ITU-T V.35, ITUT V.36, EIA530A, RS232 (ITU-T V.28), ITU-T X.21 and RS449. ...
Vendor:Other Category:Other
The XRT4000 is a fully integrated multiprotocol serial interface. It is a universal device because it supports all of the popular serial physical interfaces such as V.35, V.36, EIA-530 (A), RS232 (V.28), X.21 and RS449. ...
Vendor:Other Category:Other
XRT3591B is a single chip device which contains three V.35 receivers and transmitters. This device by itself is sufficient to implement all the data and clock signals required for a V.35 interface. For the handshaking ...
Vendor:Other Category:Other
XRT3590 is a single chip device which contains three V.35 receivers and transmitters. This device by itself is sufficient to implement all the data and clock signals required for a V.35 interface. For the handshaking s...
Vendor:Other Category:Other
This XRT3588 V.35 chip set consists of two bipolar chips, one performing a receive function, the other a transmit function according to the specification requirements laid down in Appendix 11 of the V.35 ITU-T Recommen...
Vendor:Other Category:Other
The xRSB-50T series are isolated dc/dc converters that operate from a nominal 48 Vdc source. These units will provide up to 60 W of output power from a nominal 48 Vdc input. These units are designed to be highly efficien...
Vendor:Other Category:Other
The XRS10L620 is a 2-Ch SATA, 1-Ch IDE controller with PCI-X interface. It can connect up to 4 devices at the same time, 2 SATA devices and 2 IDE/ATAPI devices.
With its 32-bit PCI-X interface, it can easily work with...
Vendor:Other Category:Other
The XRS10L240 device provides the combined advantages of the Serial ATA II Port Selector and Port Multiplier implementations for Serial ATA II systems at 3.0 Gbps and 1.5 Gbps. Combining the capability to address four ...
Vendor:Other Category:Other
The XRS10L220 provides the combined advantages of the Serial ATA II Port Selector and Port Multiplier implementations for Serial ATA II systems at 3.0 Gbps and 1.5 Gbps. Combining the capability to address two Serial A...
Vendor:Other Category:Other
The XRS10L210 is a Serial ATA II Port Selector at 3.0 Gbps and 1.5 Gbps. It provides the capability to provide a failover path from two independent hosts to a single SATA drive and offers a leading solution for propaga...
Vendor:Other Category:Other
The EXAR XRS10L140 is a Serial ATA port multiplier designed for next generation enterprise class disk array systems that use SATA mid-planes. The device is targeted at low cost storage applications.
The XRS10L140 devi...
Vendor:Other Category:Other
The EXAR XRS10L120 is a Serial ATA port multiplier designed for next generation enterprise class disk array systems that use SATA mid-planes. The device is targeted at low cost storage applications.
The XRS10L120 devi...
Vendor:Other Category:Other
The XRS040N100 Series power supplies provide up to 4 watts of output power up to -40kV max. The outputs are fully adjustable over the specified operating range. Rugged and light weight, the XRS series brings you the feat...
Vendor:Other Category:Other
The Bel xRPF-20A1A0 is a new high density open frame non-isolated converter series for space sensitive applications. Each model has a wide input range (10.2V-13.8V) and offers a wide range of output voltage (0.9 V - 5.0 ...
Vendor:Other Category:Other
The xRPC-04C50x series are part of low-cost non-isolated boost dc/dc converters that operate from a nominal 3.3 V source. The modules use a SIP package for ease of layout and space savings. The output is closely regulate...
Vendor:Other Category:Other
The Bel xRPB-06F1Ax modules are a series of non-isolated high density open frame dc/dc converters that can deliver up to 6 A of output current with full load efficiency of 94% at 3.3 V output. These modules provide preci...
Vendor:Other Category:Other
Description
The XRP7604 is a non-synchronous voltage mode PWM step down converter optimized to drive a string of high power LEDs at up to 1A of continuous current. A wide 4.5V to 29V input voltage range allows for singl...
Vendor:Other Category:Other
The XRP7603 is a non-synchronous voltage mode PWM step down converter optimized to drive a string of high power LEDs at up to 500mA of continuous current. A wide 4.5V to 29V input voltage range allows for single supp...
Vendor:Other Category:Other
Vendor:Other Category:Other
The XR-L567 is a micropower phase-locked loop (PLL) circuit designed for general purpose tone and frequency decoding. In applications requiring very low power dissipation. the XR-L567 can replace the popular 567- type de...
Vendor:Other Category:Other
The XRK799J93 is a PLL clock driver designed specifically for redundant clock tree designs. The device receives two differential LVPECL clock signals from which it generates 5 new differential LVPECL clock outputs. Two o...
Vendor:Other Category:Other
The XRK79892 is a PLL clock driver designed specifically for redundant clock tree designs. The device receives two differential LVPECL clock signals from which it generates 5 new differential LVPECL clock outputs. Two of...
Vendor:Other Category:Other
The XRK7955 is a PLL clock driver designed specifically for redundant clock tree designs. The device receives two differential LVPECL clock signals from which it generates 5 new differential LVPECL clock outputs. Two of ...
Vendor:Other Category:Other
The XRK7933 is a PLL clock driver designed specifically for redundant clock tree designs. The device receives two differential LVPECL clock signals from which it generates 5 new differential LVPECL clock outputs. Two of ...
Vendor:Other Category:Other
The XRK697H73 is a PLL based LVCMOS Clock Generator targeted for high performance and low skew clock distribution applications. The XRK697H73 can select between one of three reference inputs and provides 14 LVCMOS output...
Vendor:Other Category:Other
The XRK69774 is a PLL based LVCMOS Clock Generator targeted for high performance and low skew clock distribution applications. The XRK69774 can select between one of two reference inputs and provides 15 LVCMOS outputs -1...
Vendor:Other Category:Other
The XRK69773 is a PLL based LVCMOS Clock Generator targeted for high performance and low skew clock distribution applications. The XRK69773 can select between one of three reference inputs and provides 14 LVCMOS outputs ...
Vendor:Other Category:Other
The XRK69772 is a PLL based LVCMOS Clock Generator targeted for high performance and low skew clock distribution applications. The XRK69772 can select between one of three reference inputs and provides 14 LVCMOS outputs ...
Vendor:Other Category:Other
The XRK4993 is a 3.3V High-Speed Low-Voltage Programmable Skew Clock Buffer. It is intended for high-performance computer systems and offers user selectable control over system clock functions to optimize timing. Eight o...
Vendor:Other Category:Other
The XRK4991A 3.3V High-Speed Low-Voltage Programmable Skew Clock Buffer offers user selectable control over system clock functions to optimize the timing of high-performance computer systems. Eight individual drivers, ar...
Vendor:Other Category:Other
The XRK49911 is a 3.3V High-Speed Low-Voltage Programmable Skew Clock Buffer. It is intended for high-performance computer systems and offers user selectable control over system clock functions to optimize timing. Eight ...
Vendor:Other Category:Other
The XRK4991 is a 3.3V High-Speed Low-Voltage Programmable Skew Clock Buffer. It is intended for high-performance computer systems and offers user selectable control over system clock functions to optimize timing. Eight o...
Vendor:Other Category:Other
The XRK39910 is a high fanout phase locked-loop clock driver intended for high performance computing and data-communications applications. It has eight zero delay LVTTL outputs.When the OE pin is held low, all the output...
Vendor:Other Category:Other
The XRK39653 is a low voltage high performance PLL based zero delay buffer/clock generator designed for high speed clock distribution applications. It provides 9 low skew, low jitter outputs ideal for networking, computi...
Vendor:Other Category:Other
The XRK39351 is a low voltage PLL based clock driver designed for high speed clock distribution applications.The XRK39351 has two reference clock inputs, one LVPECL and the other LVCMOS. The REF_SEL input selects clock i...
Vendor:Other Category:Other
The XRK32510 is a high performance, low jitter, low skew clock driver. The XRK32510 uses phase-lock loop (PLL) tecnology to synthesize the CLK_IN signal into 10 output signals (QA), synchronized in both phase and frequen...
Vendor:Other Category:Other
Offered in both 16 pin SOIC and TSSOP packages, XRK32309 is a low cost 3.3V zero delay buffer. It is designed to distribute high speed clocks by taking one reference input and driving nine output clocks. The feedback of ...
Vendor:Other Category:Other
XRK32308 is a 3.3V Zero Delay Buffer designed to distribute high-speed clocks in PC, workstation, datacom, telecom, and other high-performance applications.The part has an on-chip PLL which locks to an input clock presen...
Vendor:Other Category:Other
The XRJ-FJ-260S is designed as one kind of CCD image digizer that can be used in digital video camcorders, digital still cameras, PC video teleconferencing, digital copiers, infrared image digitizers and CCD / CIS imager...
Vendor:Other Category:Other
XREWHT-L1-0000-00701 Cree XLamp LEDs combine the brightness of power LED chips with a rugged package capable of operating up to four watts. Cree XLamp LEDs lead the solidstate lighting industry in brightness while provid...
Vendor:Other Category:Other
XREWHT-L1-0000-00601 Cree XLamp LEDs combine the brightness of power LED chips with a rugged package capable of operating up to four watts. Cree XLamp LEDs lead the solidstate lighting industry in brightness while provid...
Vendor:Other Category:Other
The XRD98L63 is a complete, low power CCD Image Digitizer for digital motion and still cameras. The product includes a high bandwidth differential Correlated Double Sampler (CDS), 10-bit Programmable Gain Amplifier (PGA)...
Vendor:Other Category:Other
Description
The XRD98L62 is a complete, low power CCD Image Digitizer for digital motion and still cameras. The product includes a high bandwidth differential Correlated Double Sampler (CDS), 10-bit digitally Programmab...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.