About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index M : MC10H180P,MC10H180L,MC10EL33,
MC10H180P
Mfg:ON D/C:06+ Vendor:Other Category:Other
MC10H180L
Mfg:ON SEMI Pack:02+ D/C:DIP Vendor:Other Category:Other
MC10H179FN
Vendor:Other Category:Other
The MC10H179FN is designed as a functional/pinout duplication of the standard MECL 10K part, with 100% improvement in propagation delay and no increase in power supply current.MC10H179FN has four features. (1)Power dissi...MC10H176FN
Vendor:Other Category:Other
The MC10H176FN is designed as one kind of hex D master-slave flip-flops which contains six master slave type D flipflops with a common clock. This MC10H176FN is a functional/pinout duplication of the standard MECL 10K fa...MC10H175
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10H175 is a quint D type latch with common reset and clock lines.This MC10H175 is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation delay and no increase in ...MC10H174FN
Mfg:1700 Pack:MOT Vendor:Other Category:Other
MC10H173FN
Mfg:MOT Pack:N/A D/C:09+ Vendor:Other Category:Other
MC10H172
Vendor:Other Category:Other
MC10H171FN
Mfg:ON D/C:06+ Vendor:Other Category:Other
MC10H166
Vendor:Other Category:Other
MC10H165
Vendor:Other Category:Other
MC10H164
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H164 is a MECL 10H part which is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation delay, and no increase in power supply current.The MC10H164 is designed ...MC10H162
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10H162 provides parallel decoding of a three bit binary word to one of eight lines. The MC10H162 is useful in highspeed multiplexer/ demultiplexer applications.The MC10H162 is designed to decode a three bit input w...MC10H161
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H161 provides parallel decoding of a three bit binary word to one of eight lines. The MC10H161 is useful in highspeed multiplexer/demultiplexerapplications. The MC10H161 is designed to decode a three bit input w...MC10H160
Mfg:MOTOROLA Pack:SMD D/C:9490 Vendor:Other Category:Other
The MC10H160 is a 12bit parity generatorchecker. The output goes high when an odd number of inputs are high providing the odd parity function.Unconnected inputs are pulled to a logic low allowing parity detection and gen...MC10H159
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H159 is a quad 2input multiplexer with enable. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation delay and no increase in powersupply...MC10H158
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H158 is a quad two channel multiplexer with common input select. A "high" level select enables input D00, D10, D20 and D30 and a "low" level select enables input D01, D11, D21 and D31. This MC10H158 is a function...MC10H145
Mfg:mot Pack:PLCC Vendor:Other Category:Other
MC10H141
Mfg:mot Pack:PLCC Vendor:Other Category:Other
MC10H136
Mfg:mot Pack:PLCC Vendor:Other Category:Other
MC10H135
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
MC10H131
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
MC10H130FN
Mfg:50 Pack:MOT Vendor:Other Category:Other
MC10H125
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
The MC10H125 is a quad translator for interfacing data and control signals between the MECL section and saturated logic section of digital systems. The 10H part is a functional/pinout duplication of the standard MECL 10K...MC10H124
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
The MC10H124 is a quad translator for interfacing data and control signals between a saturated logic section and the MECL section of digital systems. The MC10H124 is a functional/pinout duplication of the standard MECL 1...MC10H123
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H123 is a triple 433Input Bus Driver.The MC10H123 consists of three NOR gates designed for bus driving applications on card or between cards. Output low logic levels are specified with VOL= 2.1 Vdc so that the bu...MC10H121
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H121 is a basic logic building block providing the simultaneous ORAND/ORANDInvert function, useful in data control and digital multiplexing applications. MC10H121 is a functional/pinout duplication of the standar...MC10H117
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H117 dual 2wide 23input ORAND/ORANDInvert gate is a general purpose logic element designed for use in data control, such as digital multiplexing or data distribution. Pin 9 is common to both gates. MC10H117 is a ...MC10H116
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H116 is a functional/pinout duplication of the MC10116, with 100% improvement in propagation delay and no increase in power supply current.MC10H115
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H115 is a quad differential amplifier designed for use in sensing differential signals over long lines. This 10H part is a functional/ pinout duplication of the standard MECL 10K family part, with 100% improvemen...MC10H113
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
The MC10H113 is a Quad Exclusive OR Gate with an enable common to all four gates. The outputs may be wireORed together to perform a 4bit comparison function (A = B). The enable is active LOW.MC10H109
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H109 is a dual 45input OR/NOR gate. This MECL 10H part is afunctional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation delay, and no increase in powersupply current.MC10H107
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H107 is a triple 2input exclusive OR/NOR gate. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation delay, and no increase in powersuppl...MC10H106
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H106 is a triple 433 input NOR gate. This 10H part is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation delay and no increase in power supply current.MC10H105
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H105 is a triple 232input OR/NOR gate. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation delay, and no increases in powersupply curre...MC10H104
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H104 is a quad 2input AND gate. One of the gates has both AND/NAND outputs available. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K MC10/100EP139 family part, with 100% improvemen...MC10H103
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10H103 is a quad 2input OR gate. The MC10H103 provides one gate with OR/NOR outputs. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation ...MC10H102
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H102 is a quad 2input NOR gate. The MC10H102 provides one gate with OR/NOR outputs. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation...MC10H101
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H101 is a quad 2input OR/NOR gate with one input from each gate common to pin 12. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K MC10H101 family part, with 100% improvement in prop...MC10H100L
Mfg:MOT Pack:CDIP941 D/C:08+ Vendor:ON Semiconductor Category:Integrated Circuits (ICs)
IC GATE NOR QUAD W/STROBE 16CDIPThe MC10H100 is a quad NOR gate. Each gate has 3 inputs, two of which are independent and one of which is tied common to all four gates.MC10H100
Mfg:MOTOROLA Pack:SMD D/C:1200 Vendor:Other Category:Other
The MC10H100 is a quad NOR gate. Each gate has 3 inputs, two of which are independent and one of which is tied common to all four gates.MC10H016
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10H016 is a highspeed synchronous, presettable, cascadable 4bit binary counter. It is useful for a large number of conversion, counting and digital integration applications.• Counting Frequency, 200 MHz Minim...MC10H
Vendor:Other Category:Other
The MC10H/100H640 generates the necessary clocks for the 68030, 68040 and similar microprocessors. MC10H/100H640 is guaranteed to meet the clock specifications required by the 68030 and 68040 in terms of parttopart skew,...MC10EPT20
Vendor:Other Category:Other
The MC10EPT20 is a 3.3 V TTL/CMOS to differential PECL translator. Because PECL (Positive ECL) levels are used, only +3.3 V and ground are required. The small outline SOIC−8 package and the single gate of the EPT20...MC10EP89
Vendor:Other Category:Other
The MC10EP89 is a differential fanout gate specifically designed to drive coaxial cables. The MC10EP89 is especially useful in digital video broadcasting applications; for this application, since the system is polarity f...MC10EP58DTR2
Mfg:ON D/C:06+ Vendor:Other Category:Other
MC10EP58DT
Mfg:ON D/C:06+ Vendor:Other Category:Other
MC10EP58DR2
Mfg:ON D/C:06+ Vendor:Other Category:Other
MC10EP58D
Mfg:ON D/C:06+ Vendor:ON Semiconductor Category:Integrated Circuits (ICs)
IC MULTIPLEXER ECL 2:1 8SOICMC10EP58
Vendor:Other Category:Other
MC10EP57
Mfg:TSSOP Pack:ON D/C:N/A Vendor:Other Category:Other
The MC10/100EP57 is a fully differential 4:1 multiplexer. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the MC10/100EP57 can also be used as a differential 2:1 multiplexer with SEL0 input se...MC10EP56
Mfg:TSSOP Pack:ON D/C:O2 Vendor:Other Category:Other
The MC10EP56 is a dual, fully differential 2:1. The differential data path makes the device ideal for multiplexing low skew clock or other skew sensitive signals. Multiple VBB pins are provided to ease AC coupling of inp...MC10EP52
Vendor:Other Category:Other
The MC10EP/100EP52 is a differential data, differential clock Dflip−flop. The device is pin and functionally equivalent to the EL52 device.Data enters the master portion of the flip−flop when the clock is LOW...MC10EP51
Vendor:Other Category:Other
The MC10/100EP51 is a differential clock D flipflop with reset. The device is functionally equivalent to the EL51 and LVEL51 devices.The reset input of MC10/100EP51 is an asynchronous, level triggered signal. Data enters...MC10EP451MC100EP451
Vendor:Other Category:Other
The MC10/100EP451 is a 6−bit fully differential register withcommon clock and single−ended Master Reset (MR). It is ideal forvery high frequency applications where a registered data path isnecessary. All inp...MC10EP446
Mfg:TQFP32 Pack:ON D/C:O2 Vendor:Other Category:Other
The MC10/100EP446 is an integrated 8−bit parallel to serial data converter. The MC10/100EP446 is designed with unique circuit topology to operate for NRZ data up to 3.2 Gb/s. The conversion sequence from parallel d...MC10EP445
Vendor:Other Category:Other
The MC10/100EP445 is an integrated 8bit differential serial to parallel data converter with asynchronous data synchronization. The MC10/100EP445 has two modes of operation. CKSEL HIGH mode is designed to operate NRZ data...MC10EP35DR2
Mfg:ON D/C:06+ Vendor:Other Category:Other
The MC10EP35 is a higher speed/low voltage version of the EL35 JK flip flop. The J/K data enters the master portion of the flip flop when the clock is LOW and is transferred to the slave, and thus the outputs, upon a pos...MC10EP33
Vendor:Other Category:Other
MC10EP32
Vendor:Other Category:Other
The MC10EP32 is an integrated 2 divider. The differential clock inputs and the VBBallow a differential, singleended or AC coupled interface to the device. If used, the V BBoutput should be bypassed to ground with a 0.01...MC10EP31
Vendor:Other Category:Other
The MC10/100EP31 is a D flipflop with set and reset. The MC10/100EP31 is pin and functionally equivalent to the EL31 and LVEL31 devices.With AC performance much faster than the EL31 and LVEL31 devices, the EP31 is ideal ...MC10EP29
Vendor:Other Category:Other
The MC10/100EP29 is a dual masterslave flipflop. The device features fully differential Data and Clock inputs as well as outputs.The MC10/100EP29 is functionally equivalent to theMC10/100EL29 Data enters the master latch...MC10EP195
Vendor:Other Category:Other
The MC10/100EP195 is a Programmable Delay Chip (PDC) designed primarily for clock deskewing and timing adjustment. It provides variable delay of a differential NECL/PECL input transition. The delay section MC10/100EP19...MC10EP17DWR2
Vendor:Other Category:Other
The MC10EP17DWR2 is one member of the MC10EP17 family which is designed as the 4-bit differential line receiver, and the >3.0 GHz maximum frequency provided by the high frequency outputs makes the device ideal for buf...MC10EP17
Mfg:SOP Pack:MOTO D/C:O3 Vendor:Other Category:Other
The MC10/100EP17 is a 4-bit differential line receiver based on the EP16 device. The >3.0 GHz maximum frequency provided by the high frequency outputs makes the device ideal buffering of very high speed oscillators. ...MC10EP16DR2
Vendor:Other Category:Other
The MC10EP16DR2 is one member of the MC10EP16 family which is designed as the differential receiver that is functionally equivalent to the EL16 and LVEL16 devices with higher performance capabilities. MC10EP16DR2 provide...MC10EP16.
Vendor:Other Category:Other
The MC10EP16 is a differential receiver. The device is functionally equivalent to the EL16 device with higher performance capabilities. With output transition times significantly faster than the EL16 the EP16 is deally s...MC10EP16
Vendor:Other Category:Other
The MC10EP16 is a differential receiver. The MC10EP16 is functionally equivalent to the EL16 and LVEL16 devices with higher performance capabilities. With output transition times significantly faster than the EL16 and LV...MC10EP14
Vendor:Other Category:Other
The MC10EP14 is a low skew 1:5 clock distribution chip designed explicitly for low skew clock distribution applications.The MC10EP14 can be driven by either a differential or singleended ECL or, if positive power supplie...MC10EP139
Vendor:Other Category:Other
The MC10/100EP139 is a low skew ÷2/4, ÷4/5/6 clock generation chip designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common output edges a...MC10EP131FAR2
Vendor:ON Semiconductor Category:Integrated Circuits (ICs)
IC FLIP FLOP QUAD CLK ECL 32LQFPThe MC10EP131FAR2 is one member of the MC10EP131 family which is designed as the 3.3V / 5V ECL quad d flip-flop with set, reset, and differential clock. It is an expansion of the MC10EP131FAR2 with differential common cl...MC10EP116
Vendor:Other Category:Other
The MC10EP116/100EP116 is a 6-bit differential line receiver based on the EP16 device. The 3.0GHz bandwidth provided by the high frequency outputs makes the device ideal for buffering of very high speed oscillators.A VBB...MC10EP11
Vendor:Other Category:Other
The MC10/100EP11 is a differential 1:2 fanout buffer. The MC10/100EP11 is pin and functionally equivalent to the LVEL11 device. With AC performance much faster than the LVEL11 device, the EP11 is ideal for applications r...MC10EP105FAR2
Vendor:Other Category:Other
The MC10EP105FAR2 is designed as one kind of 2 input differential AND/NAND gate that is ideal for applications requiring the fastest AC performance available. Features of this device are:(1)190 ps typical propagation del...MC10EP105
Mfg:MOT Pack:00+ D/C:TQFP32 Vendor:Other Category:Other
The MC10/100EP105 is a quad 2input differential AND/NAND gate. Each gate is functionally equivalent to the EP05 and LVEL05 devices. With AC performance much faster than the LVEL05 device, the EP105 is ideal for applicati...MC10EP101
Vendor:Other Category:Other
The MC10EP101 is a Quad 4input OR/NOR gate. The MC10EP101 is functionally equivalent to the E101. With AC performance faster than the E101 device, the EP101 is ideal for applications requiring the fastest AC performance ...MC10EP08
Vendor:Other Category:Other
The MC10/100EP08 is a differential XOR/XNOR gate. The EP08 is ideal for applications requiring the fastest AC performance available. The 100 Series contains temperature compensation.MC10EP05DTR2
Vendor:Other Category:Other
The MC10EP05DTR2 is designed as one kind of 2 input differential AND/NAND gate that is functionally equivalent to the EL05 and LVEL05 devices. Features of this device are:(1)220 ps typical propagation delay; (2)maximum f...MC10EP05DR2
Vendor:Other Category:Other
The MC10EP05DR2 is one of the MC10EP05D series.The MC10EP05 is a 2input differential AND/NAND gate. The MC10EP05DR2 is functionally equivalent to the EL05 and LVEL05 devices.With AC performance much faster than the LVEL0...MC10EP05
Vendor:Other Category:Other
The MC10EP05 is a 2input differential AND/NAND gate. The device is functionally equivalent to the EL05 and LVEL05 devices. With AC performance much faster than the LVEL05 device, the MC10EP05 is ideal for applications re...MC10EP016FAR2
Vendor:ON Semiconductor Category:Integrated Circuits (ICs)
IC COUNTER 8BIT SYNC ECL 32LQFPThe MC10EP016FAR2 is one member of the MC10EP016 family which is designed as the 3.3V / 5V ECL 8-bit synchronous binary up counter that features internal feedback to TC gated by the TCLD (terminal count load) pin. When T...MC10EP016
Mfg:MC D/C:2005 Vendor:Other Category:Other
The MC10/100EP016 is a highspeed synchronous, presettable, cascadeable 8bit binary counter. Architecture and operation are the same as the MC10E016 in the ECLinPS family. The MC10/100EP016 counter features internal feed...MC10EP01
Vendor:Other Category:Other
The MC10EP01 is a 4−input OR/NOR gate. The device is functionally equivalent to the EL01 device, LVEL01, and E101 (a quad version). With AC performance much faster than the LVEL01 device, the EP01 is ideal for appl...MC10ELT28
Vendor:Other Category:Other
MC10ELT26
Vendor:Other Category:Other
The MC10ELT/100ELT26 is a 1:2 fanout differential PECL to TTL translator. Because PECL (Positive ECL) levels are used only +5V and ground are required. The small outline 8-lead SOIC package and the 1:2 fanout design of t...MC10ELT25DR2
Vendor:Other Category:Other
The MC10ELT25DR2 is designed as one kind of differential ECL to TTL translator that is used a +5V, -5.2V (or -4.5V) and ground are required. MC10ELT25DR2 has the small outline 8-lead SOIC package and the single gate, so ...MC10ELT25
Mfg:MOT Pack:SMD D/C:00+ Vendor:Other Category:Other
The MC10ELT/100ELT25 is a differential ECL to TTL translator. Because ECL levels are used a +5V, -5.2V (or -4.5V) and ground are required. The small outline 8-lead SOIC package and the single gate of the ELT25 makes MC10...MC10ELT24
Mfg:MOT Pack:SMD D/C:00+ Vendor:Other Category:Other
The MC10ELT/100ELT24 is a TTL to differential ECL translator. Because ECL levels are used a +5V, -5.2V (or -4.5V) and ground are required. The small outline 8-lead SOIC package and the single gate of the ELT24 makes MC10...MC10ELT21D
Mfg:ON Pack:SOP8 D/C:06+/07+ Vendor:ON Semiconductor Category:Integrated Circuits (ICs)
IC XLATOR PECL-TTL DIFF 8SOICThe MC10ELT/100ELT21 is a differential PECL to TTL translator. Because PECL (Positive ECL) levels are used only +5V and ground are required. The small outline 8-lead SOIC package and the single gate of the ELT21 makes M...MC10ELT21
Mfg:10800 Pack:MOT Vendor:Other Category:Other
The MC10ELT/100ELT21 is a differential PECL to TTL translator. Because PECL (Positive ECL) levels are used only +5V and ground are required. The small outline 8-lead SOIC package and the single gate of the ELT21 makes MC...MC10ELT20
Vendor:Other Category:Other
The MC10ELT/100ELT20 is a TTL to differential ECL translator. Because PECL(Positive ECL) levels are used a +5V and ground are required. The small outline 8-lead SOIC package and the single gate of the ELT20 makes MC10ELT...MC10ELT
Vendor:Other Category:Other
The MC10ELT/100ELT20 is a TTL to differential PECL translator. Because PECL (Positive ECL) levels are used only +5V and ground are required. The small outline 8-lead SOIC package and the single gate of the ELT20 makes MC...MC10EL58
Mfg:MOT Pack:SMD D/C:00+ Vendor:Other Category:Other
The MC10EL/100EL58 is a 2:1 multiplexer. The MC10EL/100EL58 is functionally equivalent to the E158 device with higher performance capabilities. With propagation delays and output transition times significantly faster tha...MC10EL57
Mfg:MOTOROLA Pack:SOP16L Vendor:Other Category:Other
The MC10/100EL57 is a fully differential 4:1 multiplexer. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the MC10/100EL57 can also be used as a differential 2:1 multiplexer with SEL0 input se...MC10EL52
Mfg:MOT Vendor:Other Category:Other
The MC10EL/100EL52 is a differential data, differential clock D flip-flop with reset. The MC10EL/100EL52 is functionally equivalent to the E452 device with higher performance capabilities. With propagation delays and out...MC10EL51
Mfg:MOT Pack:SMD D/C:00+ Vendor:Other Category:Other
The MC10EL/100EL51 is a differential clock D flip-flop with reset. The MC10EL/100EL51 is functionally similar to the E151 device with higher performance capabilities. With propagation delays and output transition times s...MC10EL35
Mfg:MOT Pack:SMD D/C:97+ Vendor:Other Category:Other
The MC10EL/100EL35 is a high speed JK flip-flop. The J/K data enters the master portion of the flip-flop when the clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition of the cloc...MC10EL34
Mfg:MOTOROLA Pack:SMD Vendor:Other Category:Other
The MC10/100EL34 is a low skew ÷2, ÷4, ÷8 clock generation chip designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common output edges are ...MC10EL33D
Vendor:Other Category:Other
The MC10EL33D is a kind of integrated ÷4 divider. The differential clock inputs and the VBB allow a differential, single-ended or AC coupled interface to the device. The VBB pin, an internally generated voltage supply, i...MC10EL33
Mfg:MOTOROLA D/C:05+ Vendor:Other Category:Other
The MC10EL/100EL33 is an integrated ÷4 divider. The differential clock inputs and the VBB allow a differential, single-ended or AC coupled interface to the device. If used, the VBB output should be bypassed to ground wit...