About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index M : MC10EL32 ,MC10EL32,MC10154,
MC10EL32
Vendor:Other Category:Other
The MC10EL/100EL32 is an integrated ÷2 divider. The differential clock inputs and the VBB allow a differential, single-ended or AC coupled interface to the device. If used, the VBB output should be bypassed to ground wit...MC10EL32
Mfg:MOT Pack:SMD D/C:00+ Vendor:Other Category:Other
The MC10EL/100EL32 is an integrated ÷2 divider. The differential clock inputs and the VBB allow a differential, single-ended or AC coupled interface to the device. If used, the VBB output should be bypassed to ground wit...MC10EL31
Vendor:Other Category:Other
The MC10EL/100EL31 is a D flip-flop with set and reset. The device is functionally equivalent to the E131 device with higher performance capabilities. With propagation delays and output transition times significantly fa...MC10EL15D
Mfg:ON D/C:06+ Vendor:Other Category:Other
The MC10EL/100EL15 is a low skew 1:4 clock distribution chip designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power s...MC10EL13
Vendor:Other Category:Other
The MC100LVEL13 is a dual, fully differential 1:3 fanout buffer. The MC100EL13 is pin and functionally equivalent to the MC100LVEL13 but is specified for operation at the standard 100E ECL voltage supply. The Low OutputO...MC10EL12D
Mfg:ON Pack:SOP8 D/C:06+/07+ Vendor:Other Category:Other
The MC10EL/100EL12 is a low impedance drive buffer. With two pairs of OR/NOR outputs the device is ideally suited for high drive applications such as memory addressing. The MC10EL/100EL12 is a function equivalent to the ...MC10EL12
Vendor:Other Category:Other
The MC10EL/100EL12 is a low impedance drive buffer. With two pairs of OR/NOR outputs the device is ideally suited for high drive applications suchas memory addressing. The MC10EL/100EL12 is a function equivalent to the E...MC10EL11DT
Vendor:Other Category:Other
The MC10EL11DT is a differential 1:2 fanout buffer. The device is functionally similar to the E111 device but with higher performance capabilities. The features of MC10EL11DT are as follows: (1)265 ps Propagation Delay; ...MC10EL11
Mfg:MOT Pack:SMD D/C:00+ Vendor:Other Category:Other
The MC10EL/100EL11 is a differential 1:2 fanout buffer. The device is functionally similar to the E111 device but with higher performance capabilities. Having within-MC10EL/100EL11 skews and output transition times signi...MC10EL07D
Vendor:ON Semiconductor Category:Integrated Circuits (ICs)
IC GATE XOR/XNOR ECL 2INP 8SOICThe MC10EL07D is a 2-input XOR/XNOR gate. The device is functionally equivalent to the E107 device with higher performance capabilities. With propagation delays and output transition times significantly faster than the E...MC10EL07
Mfg:MOT Pack:SMD D/C:00+ Vendor:Other Category:Other
The MC10EL/100EL07 is a 2-input XOR/XNOR gate. The device is functionally equivalent to the E107 device with higher performance capabilities. With propagation nelay sandout put transition times significantly faster than ...MC10EL05D
Mfg:ON Pack:SOP8 D/C:06+/07+ Vendor:ON Semiconductor Category:Integrated Circuits (ICs)
IC GATE AND/NAND ECL 2INP 8SOICThe MC10EL/100EL05 is a 2-input differential AND/NAND gate. The device is functionally equivalent to the E404 device with higher performance capabilities. With propagation delays and output transition times significantl...MC10EL04D
Mfg:2900 Pack:MOT Vendor:ON Semiconductor Category:Integrated Circuits (ICs)
IC GATE AND/NAND ECL 2INP 8SOICThe MC10EL/100EL04 is a 2-input AND/NAND gate. The MC10EL/100EL04 is functionally equivalent to the E104 device with higher performance capabilities.With propagation delays and output transition times significantly faste...MC10EL04
Mfg:MOT Pack:SMD D/C:00+ Vendor:Other Category:Other
The MC10EL/100EL04 is a 2-input AND/NAND gate. The MC10EL/100EL04 is functionally equivalent to the E104 device with higher performancecapabilities. With propagation delays and output transition timessignificantly faster...MC10EL
Vendor:Other Category:Other
The MC10EL/100EL31 is a D flip-flop with set and reset. The MC10EL/100EL31 is functionally equivalent to the E131 device with higher performance capabilities. With propagation delays and output transition times significa...MC10E457
Vendor:Other Category:Other
The MC10E457/100E457 is a 3-bit differential 2:1 multiplexer. The fully differential data path makes the device ideal for multiplexing low skew clock or other skew sensitive signals.The higher frequency outputs provide t...MC10E451
Mfg:MOTOROLA Pack:PLCC-28 D/C:00+ Vendor:Other Category:Other
The MC10E/100E451 contains six D-type flip-flops with single-ended outputs and differential data inputs. The common clock input is alsodifferential. The registers are triggered by a positive transition of the positive cl...MC10E445
Vendor:Other Category:Other
The MC10/100E445 is an integrated 4-bit serial to parallel data converter. The MC10/100E445 is designed to operate for NRZ data rates of up to 2.0Gb/s. The chip generates a divide by 4 and a divide by 8 clock for bot...MC10E431FN
Mfg:IN STOCK Pack:PLCC Vendor:Other Category:Other
The MC10E/100E431 is a 3-bit flip-flop with differential clock, data input and data output.The asynchronous Set and Reset controls of MC10E/100E431 are edge-triggered rather than level controlled. MC10E/100E431 allows th...MC10E431
Mfg:MOT Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
MC10E411
Vendor:Other Category:Other
The MC10E411 is a low skew1-to-9 differential driver, designed withclock distribution in mind. The MC10E411's function and performance are similar to the popular MC10E111, with the added feature of 1.2V output swings.MC1...MC10E404
Mfg:MOT Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The MC10E404/100E404 is a 4-bit differential AND/NAND device. The differential operation of the device makes MC10E404/100E404 ideal for pulse shaping applications where duty cycle skew is critical. Special design tec...MC10E241FN
Vendor:Other Category:Other
The MC10E241FN is one member of the MC10E241 family which is designed as the 8-bit shiftable register that features internal data feedback organized so that the SHIFT control overrides the HOLD/LOAD control. MC10E241FN e...MC10E241
Vendor:Other Category:Other
The MC10E/100E241 is an 8-bit shiftable register. Unlike a standard universal shift register such as the E141, the MC10E/100E241 features internal data feedback organized so that the SHIFT control overrides the HOLD/LOAD...MC10E211
Vendor:Other Category:Other
The MC10E211 is a low skew 1:6 fanout device designed explicitly for low skew clock distribution applications. The features of MC10E211 are as follows: (1)Guaranteed Low Skew Specification; (2)Synchronous Enabling/Disabl...MC10E197
Mfg:PMI Pack:SOP Vendor:Other Category:Other
MC10E196
Vendor:Other Category:Other
An eighth latched input, D7, MC10E196 is provided for cascading multiple PDC's for increased programmable range. The cascade logic allows full control of multiple PDC's, at the expense of only a single added line to the ...MC10E195FN
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
The MC10E/100E195 is a programmable delay chip (PDC) designed primarily for clock de-skewing and timing adjustment. It provides variable delay of a differential ECL input transition.The MC10E/100E195 delay section consis...MC10E195
Vendor:Other Category:Other
The MC10E/100E195 is a programmable delay chip (PDC) designed primarily for clock de-skewing and timing adjustment. It provides variable delay of a differential ECL input transition.The MC10E/100E195 delay section consis...MC10E193FN
Vendor:Other Category:Other
The MC10E193FN is designed as an error detection and correction (EDAC) circuit. Modified hamming parity codes are generated on an 8-bit word according to the pattern shown in the logic symbol. The P5 output gives the par...MC10E193
Vendor:Other Category:Other
The MC10E/100E193 is an error detection and correction (EDAC) circuit. Modified Hamming parity codes are generated on an 8-bit word according to the pattern shown in the logic symbol. The P5 output gives the parity of th...MC10E175
Vendor:Other Category:Other
The MC10E/100E175 is a 9-bit latch. It also features a tenth latched output, ODDPAR, which is formed as the odd parity of the nine data inputs (ODDPAR is HIGH if an odd number of the inputs are HIGH). The MC10E/100E175 c...MC10E171FN
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10E/100E171 contains three 4:1 multiplexers with differential outputs. Separate Select controls are provided for the leading 2:1 mux pairs (see logic symbol). The three Select inputs control of MC10E/100E171 which ...MC10E171
Vendor:Other Category:Other
The MC10E/100E171 contains three 4:1 multiplexers with differential outputs. Separate Select controls of MC10E/100E171 are provided for the leading 2:1 mux pairs (see logic symbol). The three Select inputs control which ...MC10E167FN
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10E/100E167 contains six 2:1 multiplexers followed by Dflip-flops with single-ended outputs. Input data are selected by the Select control, SEL. The selected data of MC10E/100E167 are transferred to the flip-flop o...MC10E167
Mfg:MOTOROLA D/C:05+ Vendor:Other Category:Other
MC10E166
Mfg:MOT Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
MC10E1652L
Vendor:Other Category:Other
The MC10E1652L is fabricated using ON Semiconductor's advanced MOSAIC IIITM process and is output compatible with 10H logic devices. In addition, the MC10E1652L is available in both a 16-pin DIP and a 20-pin surface moun...MC10E1652
Mfg:MOT Pack:STK D/C:2005+ Vendor:Other Category:Other
The MC10E1652 is functionally and pin-for-pin compatible with the MC10E1651 and thus the MC1651 in the MECL IIIE family, but is fabricated using Motorola's advanced MOSAIC IIIE process and is output compatible with 10H l...MC10E1651
Vendor:Other Category:Other
The MC10E1651 is functionally and pin-for-pin compatible with the MC1651 in the MECL III family, but is fabricated using Motorola's advanced MOSAIC III process. The MC10E1651 incorporates a fixed level of input hysteresi...MC10E164
Vendor:Other Category:Other
The MC10E/100E164 is a 16:1 multiplexer with a differential output. The select inputs (SEL0, 1, 2, 3 ) control which one of the sixteen data inputs (A0 A15) is propagated to the output.Special attention to the design la...MC10E163
Vendor:Other Category:Other
The MC10E/100E163 contains two 8:1 multiplexers with differential outputs and common select inputs. The select inputs (SEL0, 1, 2) control which one of the eight data inputs (A0 A7, B0 B7) is propagated to the outputMC10E160
Vendor:Other Category:Other
The MC10E/100E160 is a 12-bit parity generator/checker. The Q output is HIGH when an odd number of inputs are HIGH. A HIGH on the Enable input (EN ) forces the Q output LOW.The MC10E/100E160 also features an output regis...MC10E158
Vendor:Other Category:Other
MC10E157
Vendor:Other Category:Other
The MC10E/100E157 contains four 2:1 multiplexers with differential outputs. The output data are controlled by the individual Select (SEL) inputs. The individual select control makes the devices well suited for random log...MC10E156FN
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10E/100E156 contains three 4:1 multiplexers followed by transparent latches with differential outputs. When both Latch Enables (LEN1, LEN2) are LOW, the latch is transparent, and output date of MC10E/100E156 is con...MC10E156
Vendor:Other Category:Other
The MC10E/100E156 contains three 4:1 multiplexers followed by transparent latches with differential outputs. When both Latch Enables (LEN1, LEN2) are LOW, the latch is transparent, and output date of MC10E/100E156 is con...MC10E155FN
Vendor:Other Category:Other
The MC10E155FN is one member of the MC10E155 family which is designed as the 6 bit 2:1 mux-latch that contains six 2:1 multiplexers followed by transparent latches with single-ended outputs. Features of MC10E155FN are:(1...MC10E155
Vendor:Other Category:Other
The MC10E/100E155 contains six 2:1 multiplexers followed by transparent latches with single-ended outputs. When both Latch Enables (LEN1, LEN2) are LOW, the latch is transparent, and output data of MC10E/100E155 is contr...MC10E151
Vendor:Other Category:Other
The MC10E/100E151 contains 6 D-type, edge-triggered, master-slave flip-flops with differential outputs. Data enters the master when both CLK1 and CLK2 are LOW, and is transferred to the slave when CLK1 or CLK2 (or both) ...MC10E143
Mfg:MOT Pack:PLCC D/C:OO Vendor:Other Category:Other
MC10E143 feature • 700MHz Min. Operating Frequency• 9-Bit for Byte-Parity Applications• Asynchronous Master Reset• Dual Clocks• Extended 100E VEE Range of 4.2V to 5.46V• 75k Input ...MC10E142
Mfg:MOT Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The MC10E/100E142 is a 9-bit shift register, designed with byte-parity applications in mind. The E142 performs serial/parallel in and serial/parallel out, shifting in one direction. The nine inputs D0 D8 accept parallel...MC10E141
Vendor:Other Category:Other
The MC10E/100E141 is an 8-bit full-function shift register. The E141 performs serial/parallel in and serial/parallel out, shifting in either direction. The eight inputs D0 D7 accept parallel input data, while DL/DR acce...MC10E137
Vendor:Other Category:Other
The MC10E/100E137 is a very high speed binary ripple counter. The two least significant bits were designed with very fast edge rates while the more significant bits maintain standard ECLinPSE output edge rates. MC10E/100...MC10E136
Vendor:Other Category:Other
The MC10E/100E136 is a 6-bit synchronous, presettable, cascadable universal counter. The device generates a look-ahead-carry output and accepts a look-ahead-carry input. These two features of MC10E/100E136 allow for the ...MC10E131
Mfg:MOTOROLA D/C:798 Vendor:Other Category:Other
The MC10E/100E131 is a quad master-slave D-type flip-flop with differential outputs. Each flip-flop may be clocked separately by holding Common Clock (CC ) LOW and using the Clock Enable (CE) inputs for clocking. Common ...MC10E122
Mfg:MOT D/C:00+ Vendor:Other Category:Other
The MC10E/100E122 is a 9-bit buffer. The device contains nine non-inverting buffer gates.MC10E116FN
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
The MC10E/100E116 is a quint differential line receivr withemitter-follower outputs. An internally generated reference supply (VBB)is available for single-ended reception.MC10E116
Vendor:Other Category:Other
The MC10E/100E116 is a quint differential line receiver with emitter-follower outputs. An internally generated reference supply (VBB) is available for single-ended reception.MC10E112FN
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
The MC10E/100E112 is a quad driver with two pairs of OR/NORoutputs from each gate, and a common, buffered enable input. Using thedata inputs the device can serve as an ECL memory address fan-outdriver. Using just the ena...MC10E112
Mfg:MOT Pack:PLCC D/C:00+ Vendor:Other Category:Other
The MC10E/100E112 is a quad driver with two pairs of OR/NORoutputs from each gate, and a common, buffered enable input. Using thedata inputs the device can serve as an ECL memory address fan-out driver. Using just the en...MC10E111FN
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10E/100E111 is a low skew 1-to-9 differential driver, designedwith clock distribution in mind. It accepts one signal input, which can be either differential or else single-ended if the VBB output is used. The signa...MC10E111
Vendor:Other Category:Other
The MC10E111 is a low skew 1-to-9 differential driver, designed with clock distribution in mind. The features of MC10E111 are as follows: (1)Guaranteed Skew Spec; (2)Differential Design; (3)VBB Output; (4)PECL Mode Ope...MC10E107
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
The MC10E/100E107 is a quint 2-input XOR/XNOR gate. The function output F is the OR of all five XOR outputs, while F is the NOR. The Q outputs need not be terminated if only the F outputs are to be used.MC10E104
Mfg:MOT Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The MC10E/100E104 is a quint 2-input AND/NANDgate. The function output F is the OR of all five AND gate outputs, while F is the NOR. The Q outputs need not be terminated if only the F outputs are to be used.MC10E
Mfg:MOTOROLA Pack:PLCC-20 D/C:00+ Vendor:Other Category:Other
The MC10E/100E151 contains 6 D-type, edge-triggered, master-slave flip-flops with differential outputs. Data enters the master when both CLK1 and CLK2 are LOW, and is transferred to the slave when CLK1 or CLK2 (or both) ...MC-108
Vendor:Other Category:Other
MC-108 feature ・11.0mm Max.,11.0mm Max. Height.・Inductance:18mH Max.・Operating frequency:400kHz Max.・In addition to the standard versions of parameters shown here, custom designs are availabl...MC1066
Vendor:Other Category:Other
The MC1066 is a serially programmable temperature sensor optimized for monitoring modern high performance CPUs with onboard integrated temperature sensing diodes. Temperature data is converted from the CPU's diode ou...MC10319
Mfg:MOTOROLA Pack:SMD D/C:220 Vendor:Other Category:Other
MC10231
Mfg:MOT Pack:PLCC20 D/C:04+ Vendor:Other Category:Other
The MC10231 is a dual masterslave type D flipflop. Asynchronous Set (S) and Reset (R) override Clock (CC) and Clock Enable (CE) inputs. Each flipflop may be clocked separately by holding the common clock in the low state...MC10216
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10216 is a high speed triple differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 11 to make the device useful as a Schmitt tr...MC10212
Vendor:Other Category:Other
The MC10212 is designed to drive up to six transmission lines simul taneously. The multiple outputs of this device also allow the wire "OR"ing of several levels of gating for minimization of gate and package count.The ab...MC10211
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
The MC10211 is designed to drive up to six transmission lines simul taneously. The multiple outputs of this device also allow the wire "OR"ing of several levels of gating for minimization of gate and package count. The a...MC10210
Vendor:Other Category:Other
The MC10210 is designed to drive up to six transmission lines simul taneously. The multiple outputs of this device also allow the wire "OR" ing of several levels of gating for minimization of gate and package count.The a...MC10198
Mfg:MOT Vendor:Other Category:Other
The MC10198 is a retriggerable monostable multivibrator. Two enable inputs permit triggering on any combination of positive or negative edges as shown in the accompanying table. The trigger input is buffered by Schmitt t...MC10197
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10197 provides a high speed hex AND function with strobe capability.MC10195
Mfg:ON Pack:DIP-16 D/C:00+ Vendor:Other Category:Other
The MC10195 is a Hex Buffer Inverter which is built using six EXCLUSIVE NOR gates. There is a common input to these gates which when placed low or left open allows them to act as inverters. With the common input connecte...MC10192
Mfg:MOT Pack:PLCC Vendor:Other Category:Other
The MC10192 contains four line drivers with complementary outputs. Each driver has a Data (D) input and shares an Enable (E) input with another driver.The two driver outputs of MC10192 are the uncommitted collectors of a...MC10189
Mfg:MOT Pack:DIP-16 D/C:05+ Vendor:Other Category:Other
The MC10189 provides a high-speed Hex Inverter with a common Enable input. The hex inverting function is provided when Enable is in the low state. When Enable is in the high state all outputs are low.MC10188
Mfg:MOT Vendor:Other Category:Other
The MC10188 is a highspeed hex buffer with a common Enable input. When Enable is in the high state, all outputs are in the low state. When Enable is in the low state, the outputs take the same state as the inputs.MC10186
Mfg:MOTOROLA Pack:CDIP D/C:242 Vendor:Other Category:Other
The MC10186 contains six highspeed, master slave type "D" flipflops. Clocking is common to all six flipflops. Data is entered into the master when the clock is low. Master to slave data transfer takes place on the positi...MC10181
Vendor:Other Category:Other
The MC10181 is a highspeed arithmetic logic unit capable of performing 16 logic operations and 16 arithmetic operations on two fourbit words. Full internal carry is incorporated for ripple through operation.Arithmetic lo...MC10178
Vendor:Other Category:Other
The MC10178 is a fourbit counter capable of dividebytwodividebyfour, dividebyeight or a dividebysixteen function.Clock inputs trigger on the positive going edge of the clock pulse. Set andReset inputs override the clock,...MC10176
Mfg:mot Pack:PLCC Vendor:Other Category:Other
The MC10176 contains six high-speed, master slave type "D" flip-flops. Clocking is common to all six flip-flops. Data is entered into the master when the clock is low. Master to slave data transfer takes place on th...MC10175
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10175 is a high speed, low power quint latch. It features five D type latches with common reset and a common twoinput clock. Data is transferred on the negative edge of the clock and latched on the positive ed...MC10174
Mfg:N/A Pack:CDIP Vendor:Other Category:Other
The MC10174 is a high speed dual channel multiplexer with outputenable capability. The select inputs determine one of four active datanputs for each multiplexer. An output enable forces both outputs lowwhen in the high s...MC10173
Vendor:Other Category:Other
The MC10173 is a quad two channel multiplexer with latch. It incorporates common clock and common data select inputs. The select input determines which data input is enabled. A high (H) level enables data inputs D00, ...MC10172FN
Vendor:Other Category:Other
The MC10172 is a binary-coded 2 line to dual 4 line decoder with selected outputs high. With either E0 or E1 low, the corresponding selected 4 outputs are low. The common enable E, when high, forces all outputs low.MC10171
Mfg:MOTORLA Pack:138 D/C:PLCC20 Vendor:Other Category:Other
The MC10171 is a binary coded 2 line to dual 4 line decoder with selectedoutputs low. With either E0 or E1 high, the corresponding selected 4 outputs arehigh. The common enable E, when high, forces all outputs high.MC10170
Mfg:MOT Vendor:Other Category:Other
The MC10170 is a 11bit parity circuit, which is segmented into 9 data bitsand 2 control bits.Output A generates odd parity on 9 bits; that is, Output A goes high for anodd number of high logic levels on the bit inputs in...MC10168
Vendor:Other Category:Other
The MC10168 is a Quad Latch with common clocking to all four latches. Separate output enabling gates are provided for each latch, allowing direct wiring to a bus. When the clock is high, outputs will follow the D inputs....MC10165
Vendor:Other Category:Other
The MC10165 is a device designed to encode eight inputs to a binary coded output. The output code is that of the highest order input. Any input of lower priority is ignored. Each output incorporates a latch allowing sync...MC10164
Vendor:Other Category:Other
The MC10164 is a high speed, low power eightchannel data selector which routes data present at oneofeight inputs to the output. The data is routed according to the three bit code present on the address inputs. An enable ...MC10162
Mfg:MOT Pack:DIP D/C:07+ Vendor:Other Category:Other
The MC10162 is designed to convert three lines of input data to a oneofeight output. The selected output will be high while all other outputs are low. The enable inputs, when either or both are high, force all outputs lo...MC10161
Mfg:ON Pack:PLCC Vendor:Other Category:Other
The MC10161 is designed to decode a three bit input word to a one of eight line output. The selected output will be low while all other outputs will be high. The enable inputs, when either or both are high, force all out...MC10160
Vendor:Other Category:Other
MC1016
Vendor:Other Category:Other
The MC10166 is a high speed expandable 5bit comparator for comparing the magnitude of two binary words. Two outputs are provided: A < B and A > B. A = B can be obtained by NORing the two outputs with an additional ...MC10159
Vendor:Other Category:Other
The MC10159 is a quad two channel multiplexer with enable. It incorporates common enable and common data select inputs. The select input determines which data inputs are enabled. A high (H) level enables data inputs D00,...MC10158
Mfg:MOTOROLA Pack:DIP-16 Vendor:Other Category:Other
The MC10158 is a quad two channel multiplexer. A common select input determines which data inputs are enabled. A high (H) level enables data inputs D00, D10, D20, and D30 and a low (L) level enables data inputs D01, D11,...MC10154
Vendor:Other Category:Other
The MC10154 is a fourbit counter capable of dividebytwo, divideby four, dividebyeight or a dividebysixteen function.Clock inputs trigger on the positive going edge of the clock pulse. Set and Reset inputs override the cl...