© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
P-based three-phase modular power quality analyzer of the WM23-96 with built-in programming key-pad.Particularly recommended for a detailed analysis of the electrical variables and of the power quality. Housing for panel...
Vendor:Other Category:Other
The WM2331 is a high speed, 10-bit pipeline analogue-todigitalconverter (ADC) with on-chip programmable gainamplifier (PGA) and clamp circuit, and internal voltagereferences. Conversion is controlled by a single clock in...
Vendor:Other Category:Other
Three-phase power analyzer of the WM22-DIN with built-in configuration key-pad; Particularly indicated for the analysis of main, secondary and energy metering electrical variables. Housing for DIN-rail or wallmounting, I...
Vendor:Other Category:Other
The WM2152 is a high speed 12-bit analogue-to-digitalconverter operating on a 3.3V supply. This device includesa high bandwidth sample and hold and internal voltagereferences. Conversion is controlled by a single clock i...
Vendor:Other Category:Other
The WM2148 is a 14-bit, 8 MSPS analogue to digitalconverter with an on-chip voltage reference, high bandwidthsample and hold amplifier and programmable gain. Theanalogue input is differential, giving excellent commonmode...
Vendor:Other Category:Other
The WM2130B is a 256 point programmable transversal filter circuit constructed using charge coupled device techniques. A sampled input signal is stored in a tapped CCD delay line and each sample multiplied by a correspon...
Vendor:Other Category:Other
The WM2130 is a high speed 10-bit analogue-to-digital converter and operates with independent analogue and digital supplies of 3V to 5.5V. This device includes a high bandwidth sample and hold and internal voltage refere...
Vendor:Other Category:Other
• I/Q demodulation for the WM2125 − Wireless Local Loop (WLL) − Set Top Box (STB) − Cable Modem• IF and Baseband Digitisation• Test Instrumentation• Medical Imaging
Vendor:Other Category:Other
The WM2124 is a dual channel 10-bit 40MSPS ADC which consumes only 275mW from a single 3.3V supply. The device is optimised for communications applications that require close matching between channels and a wide input ba...
Vendor:Other Category:Other
WM0834 and WM0838 are 8-bit analogue to digital converters (ADC) with configurable 4-input and 8-input multiplexers respectively and a serial I/O interface.
Assignment of the multiplexer inputs is configured before each...
Vendor:Other Category:Other
WM0834 and WM0838 are 8-bit analogue to digital converters (ADC) with configurable 4-input and 8-input multiplexers respectively and a serial I/O interface.
Assignment of the multiplexer inputs is configured before each...
Vendor:Other Category:Other
The WM0831 is designed as one kind of 8-bit analogue to digital converters (ADC) that can be used in (1)embedding with remote sensors; (2)equipment health monitoring; (3)automotive; (4)industrial control applications. Th...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:AGERE Pack:BGA D/C:0711+ Vendor:Other Category:Other
The WaveLAN WL64040 multimode baseband processor contains the complete signal processing functionality for both OFDM and CCK modulation. It supports Agere's patented antenna diversity implementation, which provides enhan...
Vendor:Other Category:Other
Vendor:Other Category:Other
The WL60040 MAC is designed to form a complete IEEE 802.11a/IEEE 802.11b/IEEE 802.11g chip set, along with the WL64040 baseband, WL54040 transceiver, and the WL54240 dual-band PA. Using a wide variety of host interfaces,...
Vendor:Other Category:Other
The WaveLAN WL54240 is an extremely linear, highpower amplifier for WLAN applications in the 2.4 GHz and 5 GHz bands. It has analog power control for both bands as well as an on-chip power detector to compensate the vari...
Mfg:Infineon D/C:853
Vendor:Other Category:Other
The WaveLAN WL54040 is a low-power, high-performance dual-band transceiver for the IEEE 802.11a, IEEE 802.11b, and IEEE 802.11g wireless LAN standards. The WL54040 is designed to form a complete Agere IEEE 802.11a/b/g ch...
Vendor:Other Category:Other
The WL160-P132 has many unique features:(1)horizontal or vertical design; (2)connecting cable or M8 plug 4-pin; (3)adjustable sensitivity(two-turn); (4)red and green indicator LEDs for ease fo alignment; (5)red LED to sh...
Vendor:Other Category:Other
The WL1251BZQZR is designed as one kind of dual bus buffer that can be used in digital equipment and palmtops. The small quiescent current, which is one of the features of the CMOS logic, gives way to high speed operatio...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:fagor Pack:fagor D/C:dc01 Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The WL100, together with the DE6003 frequency hopping radio transceiver, implements a wide variety of WLAN applications where NRZ encoding is used.
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:fagor Pack:fagor D/C:dc02 Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Ceramic AC Capacitors Class X1, 760 VAC/Class Y1, 500 VAC WKP
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:Vishay D/C:08+ Vendor:Other Category:Other
High Power Metal Oxide Resistors, Rugged metal oxide film, High temperature coating, non-inflammable of the WK / WR
Vendor:Other Category:Other
The WJZ2020 is a passive double-balanced diode-ring mixer that provides high dynamic range performance in a Lead Free/ RoHS-compliant surface mount package. The mixer is nominally driven with a LO input power of +17 dBm ...
Vendor:Other Category:Other
The WJZ1020H is a passive double-balanced diode-ring mixer that provides high dynamic range performance in a Lead Free/ RoHS-compliant surface mount package. The mixer is nominally driven with a LO input power of +17 dBm...
Vendor:Other Category:Other
The WJZ1020 is a passive double-balanced diode-ring mixer that provides high dynamic range performance in a Lead Free/ RoHS-compliant surface mount package. The mixer is nominally driven with a LO input power of +17 dBm ...
Vendor:Other Category:Other
The WJZ1010 is a passive double-balanced diode-ring mixer that provides high dynamic range performance in a Lead Free/ RoHS-compliant surface mount package. The mixer is nominally driven with a LO input power of +13 dBm ...
Vendor:Other Category:Other
The WJZ1000 is a passive double-balanced diode-ring mixer that provides high dynamic range performance in a Lead Free/ RoHS-compliant surface mount package.The mixer of the WJZ1000 is nominally driven with a LO input pow...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
WJ Communications' WJR7000 UHF RFID reader module is designed to enable RFID UHF Gen2 capability for handheld readers, printers and forklift readers. This allows original equipment manufacturers, value added resellers an...
Vendor:Other Category:Other
The WJM3000 can be set to transmit a range of output powers, providing increased flexibil-ity to enable optimal for different near and far field applications. The module operates over the North American UHF frequency ban...
Vendor:Other Category:Other
WJ Communications' WJM1000 UHF RFID module is designed to allow OEMs, VARs and System Integrators easy RFID integration into any new or existing products. WJ's high performance single tag access commands make the WJM1000...
Vendor:Other Category:Other
The WJLXT972ALC.A4 is designed as one kind of single-port 10/100 Mbps PHY transceiver device that provides a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MACs). And this devic...
Vendor:Other Category:Other
The WJLXT971ALE is designed as one kind of IEEE compliant Fast Ethernet PHY Transceiver that directly supports both 100BASE-TX and 10BASE-T applications.It provides a Media Independent Interface (MII) for easy attachment...
Vendor:Other Category:Other
The WJLXT971ALC is designed as one kind of IEEE compliant Fast Ethernet PHY Transceiver that directly supports both 100BASE-TX and 10BASE-T applications. It provides a Media Independent Interface (MII) for easy attachmen...
Vendor:Intel Category:Integrated Circuits (ICs)
IC 10BASE-T TXCVR 3V/5V 32-LQFPThe WJLXT905LC.C2 is designed as one kind of single-port 10/100 Mbps PHY transceiver device that provides a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MACs). And this device...
Vendor:Other Category:Other
The WJLXT386LE is designed as one kind of single-port 10/100 Mbps PHY transceiver device that provides a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MACs). And this device ca...
Vendor:Other Category:Other
The WJLXT385LE.B1 is designed as one kind of single-port 10/100 Mbps PHY transceiver device that provides a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MACs). And this device...
Vendor:Other Category:Other
The WJ-A81-1 is a kind of 10 to 1000 MHz TO-8 cascadable amplifier.
Features of WJ-A81-1 are:(1)available in surface mount; (2)high dynamic range; (3)high output power:+16 dBm typ; (4)high third order I.P.: +30 dBm typ;...
Vendor:Other Category:Other
The WJ-A19-1 is a kind of 10 to 1000 MHz TO-8 cascadable amplifier.
Features of WJ-A19-1 are:(1)available in surface mount; (2)high output power: +22.5 dBm typ; (4)high third order I.P.: +35 dBm typ; (4)medium noise fig...
Vendor:Other Category:Other
The WJA1515 is a high performance amplifier that offers high linearity in a low-cost surface-mount package. At 200 MHz, the WJA1515 typically provides 15 dB gain, +38 dBm OIP3, and +19 dBm P1dB. The device is housed in a...
Vendor:Other Category:Other
The WJA1510 is a high performance amplifier that offers high linearity in a low-cost surface-mount package. At 200 MHz, the WJA1510 typically provides 15 dB gain, +43 dBm OIP3, and +20 dBm P1dB. The device is housed in a...
Vendor:Other Category:Other
The WJA1505 is a high performance amplifier that offers high linearity in a low-cost surface-mount package. At 200 MHz, the WJA1505 typically provides 19.5 dB gain, +35 dBm OIP3, and +19 dBm P1dB. The device is housed in...
Vendor:Other Category:Other
The WJA1500 is a high performance amplifier that offers high linearity in a low-cost surface-mount package. At 200 MHz, the WJA1500 typically provides 20 dB gain, +43 dBm OIP3, and +20 dBm P1dB. The device is housed in a...
Vendor:Other Category:Other
The WJA1035 is a cascadable gain block that offers high linearity in a low-cost surface-mount package. At 1.9 GHz,the WJA1035 typically provides 15 dB gain, +36 dBm OIP3, and +16 dBm P1dB. The device is housed in a leadf...
Vendor:Other Category:Other
The WJA1030 is a cascadable gain block that offers high linearity in a low-cost surface-mount package. At 1.9 GHz, the WJA1030 typically provides 15 dB gain, +37 dBm OIP3, and +18 dBm P1dB. The device is housed in a RoHS...
Vendor:Other Category:Other
The WJA1025 is a cascadable gain block that offers high linearity in a low-cost surface-mount package. At 1.9 GHz, the WJA1025 typically provides 17 dB gain, +32 dBm OIP3, and +15.5 dBm P1dB. The device is housed in a Ro...
Vendor:Other Category:Other
The WJA1021 is a cascadable gain block that offers high linearity in a low-cost surface-mount package. At 1.9 GHz, the WJA1021 typically provides 17.5 dB gain, +37.5 dBm OIP3, and +19 dBm P1dB. The device is housed in a ...
Vendor:Other Category:Other
The WJA1015 is a high performance amplifier that offers high linearity in a low-cost surface-mount package. At 900 MHz, the WJA1015 typically provides 14 dB gain, +35.5 dBm OIP3, and +19.5 dBm P1dB. The device is housed ...
Vendor:Other Category:Other
The WJA1010 is a high performance amplifier that offers high linearity in a low-cost surface-mount package. At 900 MHz, the WJA1010 typically provides 14 dB gain, +40 dBm OIP3, and +20 dBm P1dB. The device is housed in a...
Vendor:Other Category:Other
The WJA1005 is a high performance amplifier that offers high linearity in a low-cost surface-mount package. At 900 MHz, the WJA1005 typically provides 18 dB gain, +35 dBm OIP3, and +19 dBm P1dB. The device is housed in a...
Vendor:Other Category:Other
The WJA1001 is a cascadable gain block that offers high linearity in a low-cost surface-mount package. At 900 MHz, the WJA1001 typically provides 19 dB gain, +45 dBm OIP3, and +20 dBm P1dB. The device is housed in a lead...
Vendor:Other Category:Other
The WJA1000 is a high performance amplifier that offers high linearity in a low-cost surface-mount package. At 900MHz, the WJA1000 typically provides 19 dB gain, +37 dBm OIP3, and +19.5 dBm P1dB. The device is housed in ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The WJ1042C48VDC.20S has five points of features: (1)high sensitivity; (2)super light weight; (3)conforms to FCC part 68; (4)PC board mounting; (5)available bifurcated contacts for high reliability. And the contact data ...
Vendor:Other Category:Other
Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.