© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:ROHM Pack:N/A D/C:06+ Vendor:Other Category:Other
The BA6208 and BA6208F are monolithic ICs used for driving reversible motors. They allow control of reversible motors in cassette players and other electrical equipment by using TTL-level logic signals.The ICs contain a ...
Mfg:ROHM Pack:SIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC DRIVER REVERSE MOTOR SIP9The BA6208 and BA6208F are monolithic ICs used for driving reversible motors. They allow control of reversible motors in cassette players and other electrical equipment by using TTL-level logic signals.The ICs contain a ...
Mfg:ROHM Pack:TO220 D/C:04+ Vendor:Other Category:Other
The BA61W12ST is a general-purpose, low saturation power supply with two outputs : 10V, 1A and 5V, 500mA. The IC is available in a compact TO220FP-5 package. The outputs can be turned off during the power saving state wi...
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
The BA6198S and BA6198FP are ICs with an internal 4-channel BTL power driver for CD players, a 5V regulator (requires attached PNP transistor), standard operational amplifier, and reset output pin. All driver channels ha...
Mfg:ROHM Pack:SMD Vendor:Other Category:Other
The BA6198S and BA6198FP are ICs with an internal 4-channel BTL power driver for CD players, a 5V regulator (requires attached PNP transistor), standard operational amplifier, and reset output pin. All driver channels ha...
Mfg:ROHM D/C:04+ Vendor:Other Category:Other
The BA6197FP, an IC for CD players, has a 4-channel BTL driver, 5V regulator (attached PNP transistor required), standard operational amplifier, and internal reset output linked to an internal thermal shutdown circuit. T...
Mfg:ROHM Pack:SOP-28 D/C:98+ Vendor:Other Category:Other
The BA6196FP is an IC designed CD players and has an internal 4-channel BTL driver, 5V regulator (attached PNP transistor required), standard operational amplifier and a thermal shutdown feature. The driver has gain adju...
Vendor:Other Category:Other
The BA6195FP-Y and BA6195 are ICs for CD players and have one internal BTL power driver circuit and one operational amplifier circuit with a wide output dynamic range. The wide dynamic range and internal operational ampl...
Vendor:Other Category:Other
The BA6195FP is designed as the 1-channel BTL driver because this device has one internal BTL power driver circuit and one operational amplifier circuit with a wide output dynamic range. So it can be used in CD players, ...
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
The BA6195FP-Y and BA6195 are ICs for CD players and have one internal BTL power driver circuit and one operational amplifier circuit with a wide output dynamic range. The wide dynamic range and internal operational ampl...
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
The BA6193 is a 2-channel motor driver for CD player changers and electric volume switches, and other applications as well. Because it uses a negative power supply, this IC uses the power supply of application products e...
Mfg:ROHM Pack:SIL-12 D/C:05+ Vendor:Other Category:Other
The BA6191 is a 2-channel motor driver for CD player changers and electric volume switches, among other applications. Because it uses a negative power supply, this IC uses the power supply of application products efficie...
Mfg:ROHM D/C:O9+ Vendor:Other Category:Other
The BA6129AF, BA6162, and BA6162F are reset ICs with a battery backup function, designed for equipment using SRAMs and other similar components. These ICs are configured of a reset signal and CS signal output unit and a ...
Mfg:ROHM Pack:SOP8 D/C:06+/07+ Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC RESET W/BATT BACKUP DIP8The BA6129AF, BA6162, and BA6162F are reset ICs with a battery backup function, designed for equipment using SRAMs and other similar components. These ICs are configured of a reset signal and CS signal output unit and a ...
Mfg:ROHM Pack:ZIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC SWITCHING REGULATOR SIP5
Mfg:ROHM Vendor:Other Category:Other
Mfg:ROHM Pack:SIP Vendor:Other Category:Other
Vendor:Other Category:Other
The BA6139 is a monolithic fluorescent display driver.The device features high maximum and operating voltages of 35 V and 30 V,respectively, and is applied to various types of fluorescent displays.With a 16-pin LF packag...
Mfg:ROHM Pack:SIP-9 D/C:97+ Vendor:Other Category:Other
The BA6137 is a driver IC for LED VU level meters in stereo equipment and other display applications. The IC displaysthe input level (range: 10dB to +6dB) on a 5-point, bar-type LED display.The BA6137 includes a rectifi...
Vendor:Other Category:Other
BA6132 is a monolithic switching regulator which contains five independent switching regulator blocks.Here you can get some information about the features.First,all the control circuitry required for the switching regula...
Mfg:ROHM Pack:SOP-8P D/C:02+ Vendor:Other Category:Other
The BA6129AF, BA6162, and BA6162F are reset ICs with a battery backup function, designed for equipment using SRAMs and other similar components. These ICs are configured of a reset signal and CS signal output unit and a ...
Mfg:ROHM Pack:SIL-9 D/C:07+ Vendor:Other Category:Other
The BA6125 is a driver IC for LED linear level meters in stereo equipment and other display applications.The IC displays the input level on five LEDs. The display level range is 35mVrms to 175mVrms in five equally-spaced...
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
The BA612 is a high-current driver IC, and contains an array of five Darlington transistors, each with input resistance. Input and output can be directed in the same direction using DIP Pin 14, with the layout optimized ...
Mfg:ROHM Pack:SOP D/C:00+ Vendor:Other Category:Other
Mfg:ROHM Pack:SIP Vendor:Other Category:Other
The BA6104 is a monolithic driver IC for LED level meters applications.The IC has five comparators that operate in equally-spaced steps in response to the input voltage, and drive bar-display output LEDs.When the referen...
Vendor:Other Category:Other
BA604 Small Signal Switching Diode
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
The BA5995FM is 4-channel BTL driver IC for driving actuator and motor of CD-ROM. Power package of HSOP-M28 pin enables to make set smaller. This IC is available for low voltage DSP.
Mfg:ROHM Pack:SOP-28 D/C:03+ Vendor:Other Category:Other
The BA5994FM is a 4-channel BTL driver for an actuator and motor driver of CD/CD-ROM. (Inputs for the driver connect to an operational amplifier and it is compatible with various applications.) Channel 2&3 include...
Vendor:Other Category:Other
The BA5993P incorporates 4-channel drivers that operate the motor and actuator for car CD players. CH1, 2, and CH3, 4 each have power supply independently. The highly efficient drive can be achieved due to the low voltag...
Mfg:ROHM Pack:SOP-28 D/C:01+ Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC DRIVER 4CH CD/DVD HSOP-M28BA5986FMCD-ROM / DVD 4ch BTL .ch OP-AMP ,
Vendor:Other Category:Other
The BA5984FP is a power driver for CD player.It's structure is silicon monolithic integrated circuit.When it is no load applied the quiescent circuit current,ICC is 24mA to 34mA.It's output offset voltage,VOO is -50mV to...
Vendor:Other Category:Other
The BA5983FP-E2 is designed as one kind of reversible motor driver device that has some points of features:(1)Two reversible-motor drivers in each unit; (2)Built-in thermal shutdown circuit; (3)Output voltage can be s...
Vendor:Other Category:Other
The BA5983FM-E2 is one member of the BA5983FM family.The structure is silicon monolithic integrated circuit and the product name is BTL driver for CD-ROM. Features of this part are:(1)driver exclusively for the 4-ch BTL;...
Vendor:Other Category:Other
The BA5983FM is BTL-Driver for CD-ROM.It's structure is silicon monolithic intergrated circuit,
Features of the BA5983FM are:(1)driver exclusively for the 4-ch BTL;(2)HSOP-M28 PIN power package;(3)a wide dynamic rang...
Mfg:ROHM Pack:SMD D/C:09+ Vendor:Other Category:Other
BA5974FP ,CD ,,4ch BTL . 3ch
Mfg:ROHM Pack:SMD Vendor:Other Category:Other
Mfg:ROHM Pack:SMD Vendor:Other Category:Other
The BA5972FP is a 4-channel BTL driver developed for use with CD-ROMs. A multi-purpose operational amplifier is equipped in each channel to allow use in a variety of applications. Also, by applying independent power supp...
Mfg:ROHM Pack:SMD Vendor:Other Category:Other
The BA5970FP is a 4-channel BTL driver developed to drive CD player motors and actuators. The driver input stage contains an operational amplifier, supports a variety of input formats, and allows simple configuration of ...
Vendor:Other Category:Other
Mfg:ROHM Pack:MSOP8 D/C:2000 Vendor:Other Category:Other
BA5962FVM is 1ch BTL power driver IC for CD / DVD. MSOP8 package enables the smallest configuration. This IC enables reduction of external parts, built-in level shift circuit.
Vendor:Other Category:Other
BA5961FV is 1ch BTL driver IC for tilt coil driving used for DVD-ROM / DVD-RAM / CD-ROM / CD-RW.2 general-purpose operational amplifiers are integrated into the small package, this IC has achieved a reduction of its size...
Mfg:ROHM Vendor:Other Category:Other
The BA5960FS is a 5-channel Driver (4-channel BTL and 1-channel Loading driver) for an actuator and motor. Since the operational amplifier and variable regulator are built-in, it can be compatible with various applicatio...
Vendor:Other Category:Other
Vendor:Other Category:Other
The BA5956FM has 6 features.The first one is 2chs for current driving-type BTL drivers to drive two-axis actuators,1chs for voltage driving-type BTL drivers for a feed motor,1chs for voltage driving-type BTL drivers for ...
Vendor:Other Category:Other
The BA5955FP is power driver for DVD-RAMs.It's sructure is silicon monolithic integrated circuit.
Features of the BA5955FP are:(1)2-ch current feedback-type BTL driver;(2)use of an HSOP25PIN power package allows dow...
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
BA5954FP/FM is an actuator driver IC for CD-ROM and DVD players. This actuator driver adopts current feedback system. This IC incorporates 2 channel actuator drivers and 2 channel motor drivers. Current phase lag influen...
Vendor:Other Category:Other
The BA5954FM has 7 features.The first one is 2chs for current driving-type BTL drivers to drive two-axis actuators.The second one is 1chs for voltage driving-type BTL drivers for a feed motor,4-ch driver comprising of 1c...
Mfg:ROHM Pack:SMD Vendor:Other Category:Other
The BA5952AFP is a four-channel BTL driver IC for driving the motors and actuators in products such as CD ROM drives.Two of the channels use current feedback to minimize the current phase shift caused by the influence of...
Mfg:SMD Pack:ROHM D/C:2005+ Vendor:Other Category:Other
The BA5950FP is a 4-channel H-bridge BTL power driver for CD players. Input is PWM, and gain and the filter constantcan be changed with an attached resistor and capacitor.
Vendor:Other Category:Other
Mfg:ROHM Pack:SOP D/C:09+ Vendor:Other Category:Other
BA5948FP is a 4-channel BTL driver for CD players. The adoption of HSOP28 package enables to make sets smaller. This IC incorporates thermal shutdown circuit and mute function with two mute pins. Gain can be controlled b...
Mfg:ROHM Pack:SOP-28 D/C:05+ Vendor:Other Category:Other
The BA5947FP is a 4-channel BTL driver developed for compact disc players. 3 out of 4 channels are PWM input direct connection type and incorporate primary filter.
Mfg:ROHM Pack:SOP D/C:2003 Vendor:Other Category:Other
The BA5944FP is a BTL driver IC (actuator operation) developed for CD-ROMs. Two highly accurate 3.6V regulators and a 4.2V reset circuit that acts as a peripheral power supply are included, as well as two general purpose...
Pack:SOP Vendor:Other Category:Other
The BA5941FP contains a 4-channel BTL driver for CD player motors and actuators. Perfect for compact applications with the use of the HSOP 28-pin package.
Mfg:. Pack:HSOP D/C:2008+ Vendor:Other Category:Other
The BA5937AFP is a 4-channel BTL driver developed for use with CD players. In addition to internal drivers for the focus coil, tracking coil, and sled motor, it also contains a driver for the loading motor.
Mfg:ROHM D/C:2007+ Vendor:Other Category:Other
The BA5936S is a 6-channel BTL driver developed for use as the sled motor, spindle motor, actuator, and loading motor driver for CD players. It contains a current limiting function and 5V regulator for compatibility in a...
Mfg:ROHM Pack:SMD Vendor:Other Category:Other
The BA5934FP is a 4-channel BTL driver developed to drive CD player motors and actuators. Perfect for compact applications with the use of the HSOP 28-pin power package.
Vendor:Other Category:Other
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
Mfg:ROHM Pack:SSOP28 D/C:97+ Vendor:Other Category:Other
The BA5931FP is a 4-channel BTL driver designed for CD player motors and actuators. The 28-pin HSOP package allows for application miniaturization.
Vendor:Other Category:Other
The BA5929FP is a power driver for compact disc players.It's structure is silicon monolithic integrated circuit.
Features of the BA5929FP are:(1)3-ch BTL driver;(2)use of an HSOP-25 pin power package can achieve downsiz...
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
BA5927S ,CD 6chBTL .4ch 2ch . ,3.3V
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
The BA5921FP is an IC with an internal 4-channel BTL driver for CD players and CD-ROM driver actuators and motors, as well as an internal standard operational amplifier. In addition, the 28-pin HSOP package allows for ap...
Vendor:Other Category:Other
The BA592 E6327 is one member of the BA592 series.It has the following features including (1)small plastic SMD package;(2)low diode capacitance;(3)low diode forward resistance;(4)small inductance.
BA592 E6327 These prod...
Vendor:Other Category:Other
Mfg:ROHM Pack:SSOP Vendor:Other Category:Other
BA5917AFP ,CD ,,4ch BTL IC .HSO
Vendor:Other Category:Other
The BA5916FP-Y contains a 4-channel BTL driver for CD player and CD-ROM motors and actuators and a multi-purpose operational amplifier. Perfect for compact applications with the use of the HSOP 25-pin package.
Mfg:ROHM Pack:SOP-28 D/C:02+ Vendor:Other Category:Other
The BA5915FP contains a 4-channel BTL driver for CD player motors and actuators and a multi-purpose operational amplifier. Perfect for compact applications with the use of the HSOP 28-pin package.
Mfg:ROHM D/C:99 Vendor:Other Category:Other
The BA5913FP-Y is an IC with an internal 4-channel BTL driver for CD players and CD-ROM driver actuators and motors, as well as an internal standard operational amplifier. In addition, the 25-pin HSOP package allows for ...
Vendor:Other Category:Other
The BA5912BFP is a power driver fot CD-ROM.It's structure is silicon monolithic integrated circuit.
Features of the BA5912BFP are:(1)driver exclusively for the 2-ch BTL;(2)use of an HSOP25PIN power package can achieve d...
Vendor:Other Category:Other
Vendor:Other Category:Other
The BA591 is a planar, high performance band-switching diode in the very small SOD323 SMD plastic package.
The BA591 has the following features including (1)very small plastic SMD package;(2)low diode capacitance:max. 1...
Vendor:Other Category:Other
Mfg:INFINEON Pack:123 Vendor:Other Category:Other
Vendor:Other Category:Other
The BA5826FP is a power driver for compact disc player.It's structure is silicon monolithic integrated circuit.
Features of the BA5826FP are:(1)4-ch BTL driver;(2)use of an HSOP28 power package can achieve downsizing of...
Mfg:ROHM Pack:SOP D/C:O3+ Vendor:Other Category:Other
BA5824FP incorporates 4-channel drivers that operate the motor and the actuator for car CD players. CH1,2 and CH3,4 each have power supply independently. The highly efficient drive can be achieved due to the low voltage ...
Mfg:INFINEON Pack:123 Vendor:Other Category:Other
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
BA5817FM is a 5-channel motor driver. 4 channels are BTL drivers and 1 channel is a reversible DC motor driver. 2 channels of BTL driver incorporate standard operational amplifier in pre-driver. Output voltage can be set...
Mfg:ROHM Pack:SOP-28 D/C:01+ Vendor:Other Category:Other
The BA5815FM is a power driver IC for 5-channel CD and DVD players. Two channels incorporate filters and can connect PWM input directly.The additional 2 channels incorporate a standard operational amplifier. It can reduc...
Mfg:ROHM Pack:SOP-28 D/C:04+ Vendor:Other Category:Other
The BA5814FM is 5ch BTL driver for CD applications. Separating Vcc into PREVCC and POWTr (Power divides into CH1/2 and CH4/5) can make for better power efficiency.
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
The BA5813FM is a 5-channel driver including a 4-channel BTL driver and a 1-channel reversible motor driver and regulator for car applications. Separating the Vcc into Pre and Pow can make the unit morepower efficient.
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
BA5810FP ,CD / CD-ROM 4CH BTL 1CH 5CH .4C
Mfg:ROHM D/C:00+ Vendor:Other Category:Other
The BA5801FS is a 6-channel BTL driver for the actuator and motor driver of a CD player. Three channels include internal filters which allow for directcoupling of the digital servo LSI PWM output, without the need for an...
Vendor:Other Category:Other
The Bright Red source color devices BA56-13 are made with Gallium Phosphide Red Light Emitting Diode.The Green source color devices BA56-13 are made with Gallium Phosphide Green Light Emitting Diode.The High Efficiency R...
Mfg:KINGBRIGHT D/C:07+ Vendor:Other Category:Other
The Bright Red source color devices BA56-12 are made with Gallium Phosphide Red Light Emitting Diode.The Green source color devices BA56-12 are made with Gallium Phosphide Green Light Emitting Diode.The High Efficiency R...
Mfg:KINGBRIGHT D/C:07+ Vendor:Other Category:Other
The Bright Red source color devices BA56-11 are made with Gallium Phosphide Red Light Emitting Diode.The Green source color devices BA56-11 are made with Gallium Phosphide Green Light Emitting Diode.The High Efficiency R...
Pack:ZIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC AMP DUAL PWR HI-OUTPUT HSIP15The BA5417 is a 6 to 15V-compatible dual power amplifier developed for use radio cassette players. BA5417 is equipped with standby switching functions for excellent total harmonic distortion and other basic characteristi...
Mfg:ROHM Pack:SIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC AMP AUDIO PWR 5.4W STER 12SIPThe BA5415A and BA5416 are dual power amplifier ICs that operate off a 9V to 15V supply. When driving a 4W load off a 9V supply, the BA5415A does not require a heatsink. The BA5416 uses a lost-cost package. The basic cha...
Mfg:ROHM Pack:SIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC AMP AUDIO 5W STER AB 12SIPThe BA5406 is a dual-OTL monolithic power IC with two high-output, low-frequency power amplifiers. With a 12V power supply, it has a rated output of 5W * 2 into a 3 load, and with a 9V power supply, it has a rated outpu...
Vendor:Other Category:Other
The BA534 is a monolithic power amplifier designed for portable cassette players and radios.With a 9V power supply,it has a rated output of 2.3W into a 4 load(THD=10%).It has high ripple rejection,and the"pop"noise when ...
Mfg:ROHM Pack:ZIP Vendor:Other Category:Other
The BA527 is a monolithic power amplifier designed for portable cassette players and radio cassette players. With a 6V power supply, it has a rated output of 800mW into a 4W load (THD = 10%). It is a high-grade design th...
Mfg:ROHM Pack:05+ D/C:SSOP-16P Vendor:Other Category:Other
The BA5210FS is a power amplifier with a built-in monaural speaker / stereo headphone switch. The speaker drive is BTL for large output, and when the headphones are connected, the "center-amp" design means that coupling ...
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
Mfg:ROHM Pack:TO220 Vendor:Other Category:Other
The BA51W12ST is a general-purpose, low saturation power supply with two outputs : 9V, 1A and 5V, 500mA. The ICis available in a compact TO220FP-5 package. The outputs can be turned off during the power saving state with...
Vendor:Other Category:Other
The BA51W12SAT is a general-purpose, low saturation power supply with two outputs : 9V, 1A and 5V, 500mA. The IC is available in a compact TO220FP-5 package. The outputs can be turned off during the power saving state wi...
Mfg:ROHM Pack:SOP D/C:04+ Vendor:Other Category:Other
The BA5152F is a dual-channel power amplifier designed for 1.5V headphone stereos. The circuit consists of a power supply circuit, mute circuit, bias circuit, and two amplifier circuits. To simplify assembly, the gain is...
Vendor:Other Category:Other
Vendor:Other Category:Other
Features of the BA4915-V11 are:(1)very low standby current;(2)MUTE SYSTEM,RESET with output delay for microcontrollor.
The absolute maximum ratings of the BA4915-V11 can be summarized as:(1):the parameter is supply volt...
Vendor:Other Category:Other
The BA4911-V4 is a bipolar system power supply.It's structure is silicon monolithic interarated circuit.
Features of the BA4911-V4 are:(1)terminal for micro controller power supply hold;(2)5ch requlator outputs;(3)2ch h...
Mfg:ROHM Pack:SIP-12 D/C:03+ Vendor:Other Category:Other
BA4911 is a system regulator IC for car stereo. This IC incorporates 1 channel of 5.0V output, 2 channels of 8.12V output, 1channel of 7.9V output, 1channel of 10.3V output and 2 channels of high side switch.
© 2008-2012 SeekIC.com Corp.All Rights Reserved.