About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index B : BA491,BA4908,BA336,
BA491
Vendor:Other Category:Other
BA4908
Mfg:ROHM Pack:SIP Vendor:Other Category:Other
BA4908 is a system regulator IC for car stereo. This IC incorporates 1 channel of 5.6V output, 2 channels of 8.7V output and 2 channels of high side switch.BA4900
Mfg:ROHM Pack:SIP Vendor:Other Category:Other
The BA4900 is a single-chip power supply IC for use in car stereo audio systems. The IC contains one 5.8V output for a microcontroller, three 8V outputs, one 10V output, and two outputs interlocked with BACKUP and ACC...BA489
Vendor:Other Category:Other
BA484
Mfg:ph D/C:n/a Vendor:Other Category:Other
Planar high performance band-switching diode BA484 in a hermetically sealed glass SOD68 (DO-34) package.BA482
Mfg:PHI Pack:DIP D/C:07+ Vendor:Other Category:Other
Planar high performance band-switching diode BA482 in a hermetically sealed glass SOD68 (DO-34) package.BA481
Vendor:Other Category:Other
Planar Schottky barrier diode BA481 encapsulated in a hermetically-sealed subminiature SOD68 (DO-34) glass package. The diode is suitable for mounting on a 2 E (5.08 mm) pitch.BA479S
Mfg:tfk D/C:n/a Vendor:Other Category:Other
BA479S RF PIN Diodes - Single in DO35BA479G
Vendor:Other Category:Other
BA4560RFVM
Vendor:Other Category:Other
The BA4560RFVM has 2 features.The first one is wide operating temperature range(-40 to +105[]).The second one is internal phase compensation type. The BA4560RFVM has some absolute maximum ratings(Ta=25).When parameter i...BA4560RFV
Vendor:Other Category:Other
The BA4560RFV has 2 features.The first one is wide operating temperature range(-40 to +105[]).The second one is internal phase compensation type. The BA4560RFV has some absolute maximum ratings(Ta=25).When parameter is ...BA4560RF
Vendor:Other Category:Other
The BA4560RF has 2 features.The first one is wide operating temperature range(-40 to +150[]).The second one is internal phase compensation type. The BA4560RF has some absolute maximum ratings(Ta=25).When parameter is su...BA4560
Mfg:BA Pack:DIP D/C:07+ Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC OPAMP DUAL 18V DIP8The BA4560, BA4560F, and BA4560N are dual operational amplifiers which achieve approximately twice the high output current of the BA4558, as well as featuring a higher slew rate of 4V / ms, a gain band width of 10MHz, an...BA4558RFV
Vendor:Other Category:Other
The BA455RFV is a low noise dual operational amplifiers.It's structure is silicon monolithic integrated circuit. Features of the BA455RFV are:(1)wide operation temperature range(-40 to +150);(2)interal phase compensatio...BA4558N
Mfg:ROHM Pack:SIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC OPAMP DUAL SIP8The BA4558, BA4558F, and BA4558N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These products offer high speed, a wid...BA4558F
Mfg:ROHM D/C:04+ Vendor:Other Category:Other
The BA4558, BA4558F, and BA4558N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These products offer high speed, a wid...BA4558
Mfg:N/A Pack:DIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC OPAMP DUAL DIP8The BA4558, BA4558F, and BA4558N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These products offer high speed, a wid...BA4510F-E2
Vendor:Rohm Semiconductor(VA) Category:Integrated Circuits (ICs)
IC OPAMP DUAL 3.5V SOP-8The BA4510F-E2 belongs to BA4510F family is monolithic ICs that contain two operational amplifiers with high slew rate, featuring phase compensation and they can be driven with a low-voltage power supply, requiring a pow...BA4510F
Mfg:ROHM D/C:04+ Vendor:Other Category:Other
The BA4510F and BA4510FV are monolithic ICs that contain two operational amplifiers with high slew rate, featuring phase compensation. These ICs can be driven with a low-voltage power supply, requiring a power supply ran...BA44W12SAT
Vendor:Other Category:Other
The BA44W12SAT is a general-purpose power supply with outputs : 8V, 1A and 8V, 500mA. The IC is available in a compact TO220FP-5 package. The outputs can be turned off during the power saving state with a built-in switch...BA4425F
Mfg: Pack:0 D/C:SOP-8 Vendor:Other Category:Other
The BA4425F is a monolithic IC designed for FM front end use. It consists of an RF amplifier circuit, mixer circuit, oscillation circuit, and IF buffer amplifier.BA4424N
Mfg:ROHM Pack:SIP Vendor:Other Category:Other
The BA4424N is a monolithic IC designed for FM front end use. It consists of an RF amplifier circuit, mixer circuit, local oscillation circuit, IF buffer amplifier, and a variable capacitor-diode for AFC.BA423L
Vendor:Other Category:Other
BA423L is a switching diode intended for band switching in AM radio receivers.This SM diode is a leadless diode in a hermetically sealed SOD-80 envelope with lead/tin plated metal discs at each end.It is suitable for "au...BA423AL
Vendor:Other Category:Other
Leadless diode BA423AL in a hermetically-sealed glass SOD80C SMD package with lead/tin plated metal discs at each end.BA423A
Vendor:Other Category:Other
Planar band-switching diode BA423A in a hermetically sealed glass SOD68 (DO-34) package.BA4237L
Vendor:Other Category:Other
The BA4237L is an AM/FM IF system IC that features a selectable normal or inverted-S FM output characteristic.The FM circuit consists of a differential IF amplifier,a double-balance quardrature detector and a weak signal...BA4230AFS
Vendor:Other Category:Other
The BA4230AFS is an AM/FM IF system IC that operates off a 1.5 V power supply.The FM circuit consists of a different IF amplifier,a double-balance quardrature detector and a weak input-signal IF mute circuit.The AM circu...BA423
Vendor:Other Category:Other
BA423 is a switching diode in hermetically sealed glass DO-34 envelope.It is intended for band switching in AM radio receivers. What comes next is about the BA423 ratings (limiting values in accordance with the absolute...BA4228L
Vendor:Other Category:Other
The BA4228L is a single-chip FM/AM IF system designed for use in 3 V radios.The FM block of the device consists of a differential IF amplifier,quadrature detector and IF soft muting circuit for weak input.The AM block co...BA4224
Vendor:Other Category:Other
The BA4224 is a monoithic intergrated circuit consisting of the FM IF amplifier,detector,an AM mixer IF amplifier and detector functions used in radio cassette recorders. There are some features BA4224 as follows.First ...BA4210
Vendor:Other Category:Other
The BA4210 is a monoithic intergrated circuit consisting of two FM IF amplifiers,an AM mixer and an IF amplifier for use in low-voltage FM/AM radios and cassette recorders with built-in radios. There are some features B...BA41W12ST
Mfg:ROHM Pack:TO263-5 D/C:2005 Vendor:Other Category:Other
The BA41W12ST is a general-purpose power supply with two outputs : 8V, 1A and 5V, 500mA. The IC is available in a compact TO220FP-5 package. The outputs can be turned off during the power saving state with a built-in swi...BA41W12SAT
Vendor:Other Category:Other
The BA41W12SAT is a general-purpose power supply with outputs : 8V, 1A and 8V, 500mA. The IC is available in a compact TO220FP-5 package. The outputs can be turned off during the power saving state with a built-in switch...BA4118FV
Vendor:Other Category:Other
The BA4118FV is an IF detector IC developed for use with pagers.BA4116FV
D/C:07+ Vendor:Other Category:Other
The BA4116FV is an IC with mixing circuit, IF circuit, FM detector circuit, RSSI circuit, and noise detector circuit. As it can operate at low voltages, it is ideal for use in cordless phones.BA4114
Vendor:Other Category:Other
The BA4114 is a kind of silicon monolithic intergrated circuit. What comes next is about the BA4114 absolute maximum ratings (Ta=25).The VCC (supply voltage) is 8.0 V.The Pd (power dissipation) is 550 mW.The Topr (opera...BA4112
Vendor:Other Category:Other
The BA4112 is a kind of narrow band FM-IF detection IC that is designed to be used in FM tranceivers. The typical applications include VHF-band FM tranceivers and cordless telephones. There are some features BA4112 as f...BA3990F
Vendor:Other Category:Other
The BA3990F is a ripple filter for portable CD players that operate off two batteries.BA3963
Mfg:ROHM Pack:SIP Vendor:Other Category:Other
With 5V and 7V outputs and a reset output that detects the 5V output, the BA3963 power supply IC is best suited for CD player-equipped audio systems.BA3960
Mfg:ROHM Pack:SIL-12 D/C:98+ Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC REG DUAL ADJ ON/OFF HSIP-B12The BA3960 is a dual circuit, variable output, series regulator. PNP output transistors allow minimum voltage differential between input and output. Each of the two circuits can be turned on or off independently by using...BA3950A
Mfg:ROHM Pack:SIP Vendor:Other Category:Other
With 13.3V (external transistor required), 12V, 10V, and 5.6V outputs, the BA3950A power supply IC is best suited for CD player-equipped audio systems.BA3940A
Mfg:ROHM Pack:SIL-12 D/C:05+ Vendor:Other Category:Other
With built-in 9V, 7V, and 5V outputs, the BA3940A system power supply IC is best suited for use in CD radio cassette players.BA393F
Vendor:Other Category:Other
The BA393F belongs to 3199BA393 family which with twice the capacitance of Type 3191 capacitor, Type 3199 extends output extering performance into higher power, especially with cold temperature requirements. Rilled const...BA3938
Mfg:ROHM Pack:SIL-12 D/C:03+ Vendor:Other Category:Other
The BA3938 is a system power supply IC for use in CD radio cassette players. With one 11V output and interlocked outputs of 8.5V, 5V, 9V, and VCC, the IC is best suited for CD radio cassette players.BA3935
Mfg:ROHM Pack:SIP Vendor:Other Category:Other
The BA3935 is a monolithic reference voltage power supply IC for use in CD radio cassette playersBA3933
Mfg:ROHM Pack:SIL-12 D/C:06+ Vendor:Other Category:Other
The BA3933 is a monolithic reference voltage power supply IC for use in CD radio cassette players.BA3932
Mfg:ROHM Pack:SIL-12 D/C:05+ Vendor:Other Category:Other
The BA3932 is a monolithic reference voltage power supply IC for use in CD radio cassette players.BA3924
Mfg:ROHM Pack:SIL-12 D/C:06+ Vendor:Other Category:Other
The BA3924 is a system reference power supply for use in CD radio cassette players. Outputs dedicated to a microprocessor (5.0V), CD player (7.5V), audio system (7.5V), and motor drive (9V) are built in. Also built in is...BA3918
Mfg:ROHM Pack:SIL-12 D/C:05+ Vendor:Other Category:Other
The BA3918 is a single-chip power supply IC for use in car audio systems. One 5.6V output for a microcontroller, three 8.7V outputs, and two outputs interlocked by BACKUP and ACC systems are built in.BA3915B
Mfg:ROHM Pack:SQL-16 D/C:08+ Vendor:Other Category:Other
The BA3915B is an one-chip power supply IC for use in car audio systems. The IC has seven output systems : one 5V output (VDD), four 8.5V outputs (COM, FM, AM, AR), and two high-side switch outputs (ANT, AMP). The 5V out...BA3911
Mfg:ROHM Pack:SIP-12 D/C:96+ Vendor:Other Category:Other
The BA3911 is a single-chip power supply IC for use in car audio systems. One 5.6V output for microcontrollers, three 8.7V outputs, and two outputs interlocked with BACKUP and ACC systems are built in.BA3899F
Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC EL DRIVER SOP8The BA3899F is an IC developed for EL drive applications. It uses a more compact interface than transformer systems, and is ideal for use in thin sets.BA3890F
Mfg:ROHM Pack:N/A D/C:2001 Vendor:Other Category:Other
The BA3890F is an interface IC that provides gain for the PWM signal pulses used in digital servo systems, and allows gain adjustment to eliminate the dependence on battery voltage.BA3888S
Vendor:Other Category:Other
The BA3888S is a sound processor IC that performs phase and harmonic compensation on audio signals to accurately reproduce the "rise" section of audio signals that determines the characteristics of the sound, and thus re...BA3884F
Mfg:ROHM Vendor:Other Category:Other
The BA3884F and BA3884S are sound processor ICs that perform phase and harmonic compensation on audio signals to accurately reproduce the "rise" section of audio signals that determines the characteristics of the sound, ...BA3880S
Mfg:ROHM Pack:DIP-22 D/C:98+ Vendor:Other Category:Other
The BA3880S is a sound processor IC that performs phase and harmonic compensation on audio signals to accurately reproduce the "rise" section of audio signals that determines the characteristics of the sound, and thus re...BA3880AS
Mfg:DIP Pack:ROHM D/C:O1 Vendor:Other Category:Other
The BA3880AS and BA3880AFS are sound processor ICs that perform phase and harmonic compensation on audio signals to accurately reproduce the "rise" section of audio signals that determines the characteristics of the soun...BA3870
Mfg:ROHM D/C:99 Vendor:Other Category:Other
The BA3870 is a bass boost audio IC for radio cassette players. BBS adjusts the base boost to a level appropriate for the volume, achieving a rich sound without distortion. Frequency characteristics can be set externally...BA3853BFS
Mfg:ROHM Pack:SSOP-24P D/C:02+ Vendor:Other Category:Other
The BA3853BFS is a dual-channel electronic volume controller built around a low-noise, low-distortion VCA. It is suited for car-audio applications, and has performance that rivals mechanical-type volume controllers.In ad...BA3842F
Mfg:ROH Pack:SOP D/C:97 Vendor:Other Category:Other
The BA3842F is a preset graphic equalizer IC with dynamic bass boost which is designed for audio equipmentBA3840KV
Mfg:ROHM D/C:QFP Vendor:Other Category:Other
The BA3840KV is a preset graphic equalizer IC for headphone stereos. It combines two equalizer circuit channels on a single chip, and also includes a dynamic sound leak reduction circuit.BA3838F
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
The BA3837, BA3837F and BA3838F are ICs with an internal secondary active LPF for vocal cancellation functions and mixing amplifier functions with high degrees of vocal cancellation. Three control pins are used to switch...BA3837F
Mfg:2500 Pack:ROHM Vendor:Other Category:Other
The BA3837, BA3837F and BA3838F are ICs with an internal secondary active LPF for vocal cancellation functions and mixing amplifier functions with high degrees of vocal cancellation. Three control pins are used to switch...BA3837
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
The BA3837, BA3837F and BA3838F are ICs with an internal secondary active LPF for vocal cancellation functions and mixing amplifier functions with high degrees of vocal cancellation. Three control pins are used to switch...BA3836
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
Realizes karaoke BA3836 functionality by enabling you to erase only the vocals from commercially available music software.BA3835S
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
The BA3835S and BA3835F are 5-band, band-pass filter ICs that use microprocessor time division to produce serial output for spectrum analyzer displays. To minimize the number of external components required and enable co...BA3834S
Mfg:ROHM Vendor:Other Category:Other
The BA3834S and BA3834F are 7-band, band-pass filter ICs that use microprocessor time division to produce serial output for spectrum analyzer displays. To minimize the number of attached components required and enable co...BA3830S
Mfg:ROHM Pack:02+ D/C:39 Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC BAND-PASS FILTER SDIP18The BA3830S is a 61 band band-pass filter for spectral analyzer displays with internal recording indicator output. All of the capacitors comprising the filter are internal capacitors, making it possible to significantly...BA3826S
Vendor:Other Category:Other
The BA3826S is a 7-band (2), band-pass filter that uses microprocessor time division to output in serial to left and right stereo channels. To minimize the number of external components required and enable compact and r...BA3822LS
D/C:DIP Vendor:Other Category:Other
The BA3822LS, BA3822FS, BA3823LS, and BA3824LS are monolithic, five-point stereo graphic equalizer ICs. Each IC has two channels, and the five center frequencies for each channel are independently set using external capa...BA3812L
Mfg:ROHM Pack:SIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC EQUALIZER GRAPHIC 5-CH ZIP18The BA3812L is a five-point graphic equalizer that has all the required functions integrated onto one IC. The IC is comprised of the five tone control circuits and input and output buffer amplifiers.The BA3812L features ...BA3714F
Vendor:Other Category:Other
The BA3714F is a signal sensor consisting of a sensor circuit which detects the presence of an input signal, a logic circuit which controls an output drive circuit based on the input signal, and an output drive circuit. ...BA3708F
Mfg:ROHM Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The BA3708F is a mute detector IC for 3V tape players. When the signal is higher than the input decision level VIN and longer than the song detect time, a pulse of width TW is output after the pulse delay time TD which b...BA3707
Mfg:ROHM Pack:SIP Vendor:Other Category:Other
The BA3707 is a mute detector, with an on-chip output transistor that can directly drive a solenoid. It features low operating voltage, and a wide power supply voltage range.BA3703F
Mfg:ROHM Pack:SOP8 D/C:95+ Vendor:Other Category:Other
The BA3703F is a mute detector designed for car stereos. BA3703F features low external parts count, and can detect mute whether the tape is playing or being fast-forwarded.BA3703F features a wide power supply voltage ran...BA3641FV
Mfg:ROHM Pack:TSSOP-20P D/C:03+ Vendor:Other Category:Other
The BA3641FV is an option IC developed for the purpose of adding a recording function to 1-chip playback system ICs (BA3612AKV, etc.) for headphone stereos.BA3632K
Mfg:ROHM Pack:QFP Vendor:Other Category:Other
The BA3632K is a dual-channel pre / power system IC designed for 1.5V headphone stereos. There is no need for DC/DC conversion, and the system can operate off a single battery. The IC draws low current (ICC = 2.6mA) to a...BA36-12GWA
Vendor:Other Category:Other
LED displays feature high luminance and reliability. Our displays are available in different sizes and colors.BA3612AKV
Mfg:ROHM D/C:QFP Vendor:Other Category:Other
The BA3612AKV is configured of a pre-amplifier and a headphone amplifier, and contains internal AMS, B.B, AVLS, and BEEP amplifier functions. Also, this IC can be used in combination with the BA3641FV to enable configura...BA3578FS
Mfg:ROHM Pack:SOP D/C:07+ Vendor:Other Category:Other
The BA3578FS and BA3579FS are headphone drivers with internal an LPF and fixed bass boost circuit for multi-bit D / A converters.BA3577FS
Mfg:ROHM Pack:03+ D/C:SSOP-20P Vendor:Other Category:Other
The BA3577FS is a headphone driver developed for portable digital audio equipment that supports a voltage of 1.5V.BA3576FS
Mfg:ROHM D/C:04+ Vendor:Other Category:Other
The BA3576FS is a headphone driver developed for use in 3.0V portable digital audio equipment.BA3575FS
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The BA3575FS is a headphone driver with an AVC circuit that keeps the output below a fixed level. It features low current consumption, and low output noise, and is ideal for use in portable digital audio equipment.BA3574BFS
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
The BA3574BFS is a headphone driver with a fixed-gain bass boost circuit and an AVC circuit that keeps the output below a fixed level. It features low current dissipation, and low output noise, and is ideal for use in po...BA3571FS
Mfg:ROHM Pack:SMD Vendor:Other Category:Other
The BA3571F and BA3571FS are headphone drivers designed for portable CD players. An oscillation damper is not needed at the headphone output, inimizing external components. Includes a bass boost circuit which enables set...BA3571F
Mfg:ROHM Pack:SOP D/C:09+ Vendor:Other Category:Other
The BA3571F and BA3571FS are headphone drivers designed for portable CD players. An oscillation damper is not needed at the headphone output, inimizing external components. Includes a bass boost circuit which enables set...BA3570F
Mfg:ROHM Pack:SOP D/C:09+ Vendor:Other Category:Other
The BA3570F and BA3570FS are stereo headphone amplifiers with ALS (Auto Loudness System) which have been designed for use as headphone drivers in audio equipment.BA3530FS
Mfg:ROHM Pack:SSOP Vendor:Other Category:Other
The BA3530FS is an H / P amplifier with internal secondary LPF and EVR circuits. When multibit output from a D / A converter is input, the secondary LPF outputs an audio signal. The amplifier circuit allows for line outp...BA3528AFP
Vendor:Other Category:Other
The BA3528AFP and AB3529AFP have been developed for headphone stereos. They run off a 3V power supply, and include dual pre- and power amplifiers, and a motor governor.The preamplifiers are direct-coupled, and the power ...BA3513AFS
Vendor:Other Category:Other
The BA3513AFS is a dual, pre / power amplifier designed for headphone stereo applications. It has all of the basic signal circuits required for tape players, and operates off a 3V supply.The auto-reverse-compatible pream...BA3430S
Mfg:ROHM Pack:DIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC PREAMP AUDIO STER AB 24SDIPThe BA3430S, BA3430F, and BA3430FS are stereo pre-amplifiers with mute detection circuits which have been designed for use in car stereos. The analog circuitry including the pre-amplifier and mute detection and the digit...BA3430F
Mfg:ROHM Pack:SOP Vendor:Other Category:Other
The BA3430S, BA3430F, and BA3430FS are stereo pre-amplifiers with mute detection circuits which have been designed for use in car stereos. The analog circuitry including the pre-amplifier and mute detection and the digit...BA3426AS
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
The BA3426AS is a record/ playback system preamplifier for radio cassette decks. It also has a CD input. BA3426AS has three control switches for function and tape mode switching and mic on /off.BA3426AS requires far fewe...BA3423S
Mfg:ROHM Pack:DIP Vendor:Other Category:Other
The BA3423S is a record / playback system preamplifier for radio cassette decks. With four control pins it allows switching between I / O for the A (play only) and B (record and play) mechanisms, input for tape, radio, a...BA3420AL
Vendor:Other Category:Other
The BA3420AL is dual recording/ playback preamplifier for radio cassette players and it has an internal switch for switching between playback head, mic, and radio input modes, and also includes a bias oscillator and regu...BA3416BL
Mfg:ROHM Pack:SIP Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC PREAMP DUAL RECORDER ZIP18The BA3416BL is a dual preamplifier (for playback only) that has been designed for use with dual-cassette decks. An internal switch is used to switch the left and right channel inputs between the A and B tape mechanisms....BA33D18HFP
Vendor:Other Category:Other
The BA33D18HFP is a silicon monolithic integrated circuit,dual low-dropout voltage regulator. Features of the BA33D18HFP are:(1)dual output :3.3V/0.5A; (2)output voltage accuracy:±2%. The absolute maximum ratings of th...BA33C25FP
D/C:94 Vendor:Other Category:Other
BA33C25FP/HFP is a 2-output LDO series regulator IC. Output current is 1A at maximum and output voltage accuracy is +/-2%. This IC incorporates over-current protection and thermal protection circuits.BA33BC0WFP-E2
Vendor:Rohm Semiconductor Category:Integrated Circuits (ICs)
IC REG LDO 1A 3.3V SHTDN TO252-5Features of the BA33BC0WFP-E2 are:(1)maximum output current is 1A;(2)high precision output voltage is ±2%. The absolute maximum ratings of the BA33BC0WFP-E2 can be summarized as:(1):the parameter is supply voltage,the s...BA336
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The BA336, BA338 and BA338L are monolithic ICs designed for mute detection and tape end detection. When a duration of silence (52dBm or less) exceeds the time constant set with an external CR circuit, a song gap is ident...