© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
This DM74S30 contains a single gate which performs the logic NAND function.
Vendor:Other Category:Other
This DM74S299 Schottky TTL eight-bit universal register features multiplexed inputs/outputs to achieve full eight bit data handling in a single 20-pin package. Two function-select inputs and two output-control inputs can...
Vendor:Other Category:Other
The DM74S288 is organized in the popular 32 words by 8 bits configularation. The features of DM74S288 can be summarized as (1)advanced titanium-tungsten fuses; (2)schottky-clamped for high speed: address access down to 2...
Vendor:Other Category:Other
These DM74S283 full adders perform the addition of two 4-bit binary numbers. The sum () outputs are provided for each bit and the resultant carry (C4) is obtained from the fourth bit. These DM74S283 adders feature full ...
Vendor:Other Category:Other
These universal, nine-bit parity generators/checkers, DM74S280 utilize Schottky-clamped TTL high-performance circuitry, and feature odd/even outputs to facilitate operation of either odd or even parity applications. The ...
Vendor:Other Category:Other
These DM74S257 Schottky-clamped high-performance multiplexers feature 3-STATE outputs that can interface directly with data lines of bus-organized systems. With all but one of the common outputs of DM74S257 disabled (at ...
Mfg:TOSHIBA Pack:DIP D/C:350 Vendor:Other Category:Other
Each of these DM74S253 Schottky-clamped data selectors/multiplexers contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection to the AND-OR gates. Separate output control input...
Vendor:Other Category:Other
These DM74S244 buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/drivers employed as memory address drivers, clock driv- ers, and bus-oriented transmitters/receiver...
Vendor:Other Category:Other
These DM74S241 buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/drivers employed as memory address drivers, clock driv- ers, and bus-oriented transmitters/receiver...
Vendor:Other Category:Other
These DM74S240 buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/drivers employed as memory address drivers, clock driv- ers, and bus-oriented transmitters/receiver...
Vendor:Other Category:Other
This DM74S20 contains two independent gates each of which performs the logic NAND function.
Vendor:Other Category:Other
These DM74S194 bidirectional shift registers are designed to incorporate virtually all of the features a system designer may want in a shift register; they feature parallel inputs, parallel outputs, right-shift and left-...
Vendor:Other Category:Other
These DM74S182 circuits are high-speed, look-ahead carry generators, capable of anticipating a carry across four binary adders or groups of adders. They are cascadable to perform full look-ahead across n-bit adders. Carr...
Vendor:Other Category:Other
These DM74S175 positive-edge-triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic. All have a direct clear input, and the quad (DM74S175) versions feature complementary outputs from each flip-fl...
Vendor:Other Category:Other
These DM74S174 positive-edge-triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic. All DM74S174 have a direct clear input, and the quad (DM74S175) versions feature complementary outputs from eac...
Mfg:NS Pack:2500 Vendor:Other Category:Other
These DM74S163 synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. They are 4-bit binary counters. The carry output is decoded by means of a NOR gate, th...
Vendor:Other Category:Other
These DM74S161 synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. They are 4-bit binary counters. The carry output is decoded by means of a NOR gate, th...
Vendor:Other Category:Other
These DM74S158 data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four output gates. A separate strobe input is provided. A 4-bit word is selected from one of two sourc...
Mfg:TOSHIBA Pack:DIP D/C:800 Vendor:Other Category:Other
These DM74S157 data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four output gates. A separate strobe input is provided. A 4-bit word is selected from one of two sourc...
Mfg:TOSHIBA Pack:DIP D/C:1000 Vendor:Other Category:Other
Each of these DM74S153 data selectors/multiplexers contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection to the AND-OR-invert gates. Separate strobe inputs are provided fo...
Mfg:TOSHIBA Pack:DIP D/C:1100 Vendor:Other Category:Other
These DM74S151 data selectors/multiplexers contain full on-chip decoding to select the desired data source. The DM74S151 selects one-of-eight data sources. The DM74S151 has a strobe input which must be at a low logic le...
Vendor:Other Category:Other
This DM74S140 contains two independent line driver gates each of which performs the logic NAND function.
Vendor:Other Category:Other
These DM74S139 Schottky-clamped circuits are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these DM...
Mfg:NS D/C:06+ Vendor:Other Category:Other
These Schottky-clamped circuits DM74S138 are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these de...
Mfg:NS Vendor:Other Category:Other
This DM74S133 contains a single gate which performs the logic NAND function.
Vendor:Other Category:Other
This DM74S112 device contains two independent negative-edge-trig-gered J-K flip-flops with complementary outputs. The J and K data is processed by the flip- flops on the falling edge of the clock pulse. The clock trigger...
Vendor:Other Category:Other
This DM74S11 contains three independent gates each of which performs the logic AND function.
Vendor:Other Category:Other
This DM74S10 contains three independent gates each of which performs the logic NAND function.
Mfg: Pack:84 D/C:DIP Vendor:Other Category:Other
This DM74S09 device contains four independent gates each of which performs the logic AND function. The open-collector out-puts require an external pull-up resistor for proper logical operation.
Vendor:Other Category:Other
This DM74S08 device contains four independent gates each of which performs the logic AND function.
Vendor:Other Category:Other
This DM74S05 device contains six independent gates each of which performs the logic INVERT function. The open-collector outputs require external pull-up resistors for proper logical operation.
Vendor:Other Category:Other
This DM74S03 device contains four independent gates each of which performs the logic NAND function. The open-collector out-puts require external pull-up resistors for proper logical operation.
Vendor:Other Category:Other
This DM74S02 device contains four independent gates each of which performs the logic NOR function.
Vendor:Other Category:Other
This DM74S00 device contains four independent gates each of which performs the logic NAND function.
Mfg:NS Pack:DIP-18 Vendor:Other Category:Other
These DM74LS962 circuits are TRI-STATE edge-triggered 8-bit IO reg-isters in parallel with 8-bit serial shift registers which are capable of operating in any of the following modes parallel load from IO pins to registe...
Mfg:- Pack:DIP/SMD D/C:- Vendor:Other Category:Other
This DM74LS86 contains four independent gates each of which performs the logic exclusive-OR function.
Vendor:Other Category:Other
The DM74LS85ASJ is an dual positive-edge-triggered D flip-flops with preset,clear and complementary outputs.This device contains two independent positive-edge-trig-gered D flip-flops with complementary outputs. The info...
Vendor:Other Category:Other
These 4-bit magnitude comparators,DM74LS85 perform comparison of straight binary or BCD codes. Three fully-decoded decisions about two, 4-bit words (A, B) are made and are externally available at three outputs. These...
Vendor:Other Category:Other
These DM74LS83A full adders perform the addition of two 4-bit binary numbers. The sum () outputs are provided for each bit and the resultant carry (C4) is obtained from the fourth bit. These DM74LS83A adders feature full...
Vendor:Other Category:Other
These DM74LS75 latches are ideally suited for use as temporary storage for binary information between processing units and input/output or indicator units. Information present at a data (D) input is transferred to the Q ...
Vendor:Other Category:Other
This DM74LS74Adevice contains two independent positive-edge-triggered D flip-flops with complementary outputs. The informa-tion on the D input is accepted by the flip-flops on the positive going edge of the clock puls...
Vendor:Other Category:Other
This DM74LS73A device contains two independent negative-edge-triggered J-K flip-flops with complementary outputs. The J and K data is processed by the flip-flops on the falling edge of the clock pulse. The clock triggeri...
Vendor:Other Category:Other
These DM74LS670 register files are organized as 4 words of 4 bits each, and separate on-chip decoding is provided for addressing the four word locations to either write-in or retrieve data. This permits writing into one ...
Vendor:Other Category:Other
These DM74LS645 octal bus transceivers are designed for asynchro-nous two-way communication between data buses. The DM74LS645 devices transmit data from the A bus to the B bus or from the B bus to the A bus depending upo...
Vendor:Other Category:Other
The DM74LS574 is a high speed low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D inputs is stored in the flip-flops on the LOW-to-HIGH...
Vendor:Other Category:Other
The DM74LS564 is a high speed low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D inputs is stored in the flip-flops on the LOW-to-HIGH...
Vendor:Other Category:Other
This DM74LS55 device contains a combination of AND-OR-INVERT functions. The internal gates are configured as two, four-input AND gates with their outputs connected to a two-input NOR gate.
Vendor:Other Category:Other
This DM74LS54 device contains a combination of four,two input AND gates whose outputs are connected to a four input NOR gates.
Vendor:Other Category:Other
The DM74LS534 is a high speed, low power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-STATE outputs for bus oriented applications. A buffered Clock (CP) and Output Enable (OE) is commo...
Vendor:Other Category:Other
The DM74LS533 consists of eight latches with 3-STATE outputs for bus organized system applications. The flipflopsappear transparent to the data when Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setu...
Vendor:Other Category:Other
This DM74LS51 device contains two independent combinations of gates each of which performs the logic AND-OR-INVERT function. Each package contains one 2-wide 2-input and one 2-wide 3-input AND-OR-INVERT gates.
Vendor:Other Category:Other
The DM74LS503 register has an active LOW Enable (E) input that is used in cascading two or more packages for longer word lengths. A HIGH signal on E, after a START operation, forces Q7 HIGH and prevents the device from a...
Vendor:Other Category:Other
The DM74LS502 is an 8-bit register with the interstage logic necessary to perform serial-to-parallel conversion and provide an active LOW Conversion Complete (CC) signal coincident with storage of the eighth bit. An acti...
Vendor:Other Category:Other
The DM74LS47 accepts four lines of BCD (8421) input data, generates their complements internally and decodes the data with seven AND/OR gates having open-collector outputs to drive indicator segments directly. Each segme...
Vendor:Other Category:Other
The DM74LS469 is an 8-bit synchronous up/down counter with parallel load and hold capability. Three function-select in-puts (LD,UD, CBI) provide one of four operations which occur synchronously on the rising edge of the ...
Vendor:Other Category:Other
These DM74LS468 devices provide eight two-input buffers in each pack-age All employ the newest low-power-Schottky TTL tech-nology One of the two inputs to each buffer is used as acontrol line to gate the output into the ...
Vendor:Other Category:Other
These DM74LS467devices provide eight two-input buffers in each pack-age All employ the newest low-power-Schottky TTL tech-nology One of the two inputs to each buffer is used as acontrol line to gate the output into the h...
Vendor:Other Category:Other
These DM74LS466 devices provide eight two-input buffers in each pack-age All employ the newest low-power-Schottky TTL tech-nology One of the two inputs to each buffer is used as acontrol line to gate the output into the ...
Vendor:Other Category:Other
The DM74LS465N is designed as one kind of octal buffers which provide eight, two-input buffers in each package. All DM74LS465N employ the newest low-power-schottky TTL technology. One of the two inputs to each buffer is ...
Vendor:Other Category:Other
These DM74LS465 devices provide eight two-input buffers in each pack-age All employ the newest low-power-Schottky TTL tech-nology One of the two inputs to each buffer is used as acontrol line to gate the output into the ...
Vendor:Other Category:Other
The DM74LS461 is an 8-bit synchronous counter with parallel load, clear, and hold capability. Two function select inputs (I0, I1) provide one of four operations which occur synchronously on the rising edge of the clock (...
Vendor:Other Category:Other
These DM74LS42 BCD-to-decimal decoders consist of eight inverters and ten four-input NAND gates The inverters of DM74LS42 are connect-ed in pairs to make BCD input data available for decoding by the NAND gates Full decod...
Vendor:Other Category:Other
This DM74LS40 contains two independent gates each of which perform the logic NAND function.
Vendor:Other Category:Other
The DM74LS395 is a 4-bit shift register with TRI-STATE outputs and can operate in either a synchronous parallel load or a serial shift-right mode, as determined by the Select input. An asynchronous active LOW Master Rese...
Mfg:NSC Pack:DIP D/C:1998 Vendor:Other Category:Other
Each of these DM74LS393 monolithic circuits contains eight masterslave flip-flops and additional gating to implement two individual four-bit counters in a single package. The DM74LS393 comprises two independent four-bit ...
Vendor:Other Category:Other
Each of these DM74LS390 monolithic circuits contains eight masterslave flip-flops and additional gating to implement two individual four-bit counters in a single package. The DM74LS390 incorporates dual divide-by-two and...
Vendor:Other Category:Other
This DM74LS38 contains four independent gates, each of which performs the logic NAND function. The open-collector outputs require external pull-up resistors for proper logical operation.
Vendor:Other Category:Other
The DM74LS379 is a 4-bit register with buffered common Enable This device is similar to the LS175 but features the common Enable rather than common Master Reset
Mfg:FSC Pack:DIP D/C:07+ Vendor:Other Category:Other
The DM74LS377N is an 8-bit register built using advanced low power Schottky technology. This register consists of eight D-type flip-flops with a buffered common clock and a buffered common input enable. The device is pac...
Vendor:Other Category:Other
The DM74LS377 is an 8-bit register built using advanced low power Schottky technology. This register consists of eight D-type flip-flops with a buffered common clock and a buffered common input enable. The device is pack...
Vendor:Other Category:Other
These DM74LS374 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic level drive p...
Vendor:Other Category:Other
These DM74LS373 8-bit registers feature totem-pole TRI-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic level drive pr...
Mfg:N/A D/C:01+ Vendor:Other Category:Other
These DM74LS373 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic level drive p...
Vendor:Other Category:Other
This DM74LS368A device contains six independent gates each of which performs an inverting buffer function. The outputs have the TRI-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a ...
Vendor:Other Category:Other
This DM74LS367A device contains six independent gates each of which performs a non-inverting buffer function. The outputs have the 3-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a...
Vendor:Other Category:Other
This DM74LS365A device contains six independent gates each of which performs a non-inverting buffer function. The outputs have the TRI-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of...
Vendor:Other Category:Other
Each of these DM74LS352 data selectorsmultiplexers contains inverters and drivers to supply fully complementary on-chip bi- nary decoding data selection to the AND-OR-invert gates Separate strobe inputs are provided for ...
Vendor:Other Category:Other
The DM74LS323 is an 8-bit universal shift/storage register with TRI-STATEÉ outputs. Its function is similar to the 'LS299 with the exception of Synchronous Reset. Parallel load in-puts and flip-flop outputs are mu...
Vendor:Other Category:Other
This DM74LS32 contains four independent gates each of which performs the logic OR function.
Vendor:Other Category:Other
This DM74LS30 contains a single gate which performs the logic NAND function
Vendor:Other Category:Other
The DM74LS299 is an 8-bit universal shift/storage register with TRI-STATE. outputs. Four modes of operation are possible: hold (store), shift left, shift right and load data. The parallel load inputs and flip-flop output...
Vendor:Other Category:Other
The DM74LS298 is a quad 2-port register. It is the logical equivalent of a quad 2-input multiplexer followed by a quad 4-bit edge-triggered register. A Common Select input selects between two 4-bit input ports (data sour...
Vendor:Other Category:Other
These DM74LS283 full adders perform the addition of two 4-bit binary numbers. The sum (R) outputs are provided for each bit and the resultant carry (C4) is obtained from the fourth bit. These DM74LS283 adders feature ...
Vendor:Other Category:Other
The DM74LS28 contains four independent gates each of which perform the logic NOR function.
Vendor:Other Category:Other
The DM74LS279 consists of four individual and independent Set- Reset Latches with active low inputs Two of the four latch- es have an additonal S input ANDed with the primary S input A low on any S input while the R inpu...
Vendor:Other Category:Other
The DM74LS273WM is designed as a high speed 8-bit register, consisting of eight D-type flip-flops with a common clock and an asynchronous active low master reset. This device is supplied in a 20-pin package featuring 0....
Vendor:Other Category:Other
The DM74LS273N is a high speed 8-bit register, consisting of eight D-type flip-flops with a common Clock and an asynchronous active LOW Master Reset. This device is supplied in a 20-pin package featuring 0.3 inch row spa...
Vendor:Other Category:Other
The DM74LS273M is designed as a high speed 8-bit register, consisting of eight D-type flip-flops with a common clock and an asynchronous active low master reset. This device is supplied in a 20-pin package featuring 0.3 ...
Vendor:Other Category:Other
The DM74LS273 is a high speed 8-bit register, consisting of eight D-type flip-flops with a common Clock and an asynchronous active LOW Master Reset. This device is supplied in a 20-pin package featuring 0.3 inch row s...
Vendor:Other Category:Other
This DM74LS27 contains three independent gates each of which performs the logic NOR function.
Vendor:Other Category:Other
This DM74LS266 contains four independent gates each of which performs the logic exclusive-NOR function. Outputs are open collector.
Vendor:Other Category:Other
This DM74LS260 contains two individual five input gates, each of which perform the logic NOR function.
Vendor:Other Category:Other
This device DM74LS26 contains four independent gates each of which performs the logic NAND function. The open-collector outputs require external pull-up resistors for proper logical operation.These gates of DM74LS26 feat...
Mfg:NS Pack:DIP Vendor:Other Category:Other
These DM74LS259 8-bit addressable latches are designed for general purpose storage applications in digital systems. Specific uses include working registers, serial-holding registers,and active-high decoders or demultiple...
Vendor:Other Category:Other
These DM74LS258B Schottky-clamped high-performance multiplexers feature TRI-STATE outputs that can interface directly with data lines of bus-organized systems.With all but one of the common outputs disabled(at a high imp...
Vendor:Other Category:Other
These DM74LS257B Schottky-clamped high-performance multiplexers feature TRI-STATE outputs that can interface directly with data lines of bus-organized systems.With all but one of the common outputs disabled(at a high imp...
Mfg:NS Pack:SOP16S D/C:2007+ Vendor:Other Category:Other
Each of these DM74LS253M Schottky-clamped data selectors/multiplexers contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection to the AND-OR gates. Separate output control inp...
Vendor:Other Category:Other
Each of these DM74LS253 Schottky-clamped data selectors/multiplexers contains inverters and drivers to supply fully complementary,on-chip, binary decoding data selection to the AND-OR gates. Separate output control input...
Vendor:Other Category:Other
These DM74LS251 data selectors/multiplexers contain full on-chip binary decoding to select one-of-eight data sources, and feature a strobe-controlled 3-STATE output. The strobe must be at a low logic level to enable thes...
Mfg:TOSHIBA Pack:DIP-20 D/C:36 Vendor:Other Category:Other
These DM74LS245 octal bus transceivers are designed for asynchro-nous two-way communication between data buses. The control function implementation minimizes external timing requirements. The DM74LS245 device allows...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.