DM74LS374

Features:

 Choice of 8 latches or 8 D-type flip-flops in a single package
 3-STATE bus-driving outputs
 Full parallel-access for loading
 Buffered control inputs
 P-N-P inputs reduce D-C loading on data lines


Specifications

Supply Voltage                                                                   7V
Input Voltage                                                                     7V
Storage Temperature Range                       -65°C to +150°C
Operating Free Air Temperature Range            0°C to +70°C


Description

   These DM74LS374 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic level drive provide these DM74LS374 registers with the capability of being connected directly to and driving the
bus lines in a bus-organized system without need for interface or pull-up components. They are particularly attractive for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

   The eight latches of the DM74LS373 are transparent Dtype latches meaning that while the enable (G) is HIGH the Q outputs will follow the data (D) inputs. When the enable is taken LOW the output will be latched at the level of the data that was set up.

   The eight flip-flops of the DM74LS374 are edge-triggered D-type flip flops. On the positive transition of the clock, the Q outputs will be set to the logic states that were set up at the D inputs.

   A buffered output control input can be used to place the eight outputs in either a normal logic state (HIGH or LOW logic levels) or a high-impedance state. In the high-impedance state the outputs neither load nor drive the bus lines significantly.

   The output control does not affect the internal operation of the latches or flip-flops. That is, the old data can be retained or new data can be entered even while the outputs OF DM74LS374 are OFF.