© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:DALLAS Pack:SOP Vendor:Other Category:Other
The DS2437 Smart Battery Monitor provides several functions that are desirable to carry in a battery pack: a means of tagging a battery pack with a unique serial number; a direct-to-digital temperature sensor which elimi...
Vendor:Maxim Integrated Products Category:Programmers, Development Systems
KIT DEMO BATT ID/MON CHIP DS2436
Mfg:DALLAS Pack:N/A D/C:09+ Vendor:Other Category:Other
The DS2436 Battery Identification/Monitor Chip provides a convenient method of tagging and identifying battery packs, by manufacturer, chemistry, or other identifying parameters. The DS2436 allows the battery pack to be ...
Mfg:4961 Pack:DALLAS Vendor:Other Category:Other
The DS2435 Battery Identification Chip with Time/Temperature Histogram provides a convenient method of tagging and identifying battery packs by manufacturer, chemistry, or other identifying parameters. The DS2435 allows ...
Mfg:DS D/C:0 Vendor:Other Category:Other
The DS2434 Battery Identification Chip provides a convenient method of tagging and identifying battery packs by manufacturer, chemistry, or other identifying parameters. The DS2434 allows the battery pack to be coded wit...
Mfg:MAXIM Vendor:Other Category:Other
The DS2433-Z01 is identical to the standard DS2433 with the exception that the write cycle endurance specification is relaxed to 10,000 cycles as specified in Table 1. The device consists of a factory-lasered registratio...
Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC EEPROM 1-WIRE 4KB 8-SOICThe DS2433S is designed as 4K-bit 1-wire EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for...
Mfg:DALLAS Pack:TO92 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC EEPROM 1-WIRE 4KB PR-35The DS2433 4kb 1-Wire® EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for example a sin...
Vendor:Other Category:Other
The DS2432 combines 1024 bits of EEPROM, a 64-bit secret, an 8-byte register/control page with up to 5 user read/write bytes, a 512-bit SHA-1 engine and a fully-featured 1-Wire interface in a single chip. Each DS2432 has...
Mfg:DALLAS D/C:07+ Vendor:Other Category:Other
The DS2431 is a 1024-bit, 1-Wire® EEPROM chip organized as four memory pages of 256 bits each. Data is written to an 8-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four m...
Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC EEPROM 256BIT 1-WIRE 6-TSOCThe DS2430AP is designed as 256-bit 1-wire EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, f...
Mfg:DALLAS Pack:SOJ6 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC EEPROM 256BIT 1-WIRE TO-92The DS2430A 256-bit 1-Wire EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for example a sin...
Mfg:DALLAS Pack:1000 D/C:01. Vendor:Other Category:Other
The DS2423 1-Wire® RAM with Counters is a fully static, read/write memory for battery operation in a low-cost, six-lead TSOC, surface-mount package. The memory is organized as 16 pages of 256 bits each. In addition, ...
Vendor:Other Category:Other
The DS2417P is designed as 1-wire time chip with interrupt offers a simple solution for storing and retrieving vital time information with minimal hardware. It contains a unique lasered ROM and a real-time clock/calendar...
Mfg:DALLAS Pack:1000 D/C:01. Vendor:Other Category:Other
The DS2417 1-Wire Time Chip with Interrupt offers a simple solution for storing and retrieving vital time information with minimal hardware. The DS2417 contains a unique lasered ROM and a real-time clock/calendar impleme...
Vendor:Other Category:Other
The DS2415P is designed as 1-wire time chip with interrupt offers a simple solution for storing and retrieving vital time information with minimal hardware. It contains a unique lasered ROM and a real-time clock/calendar...
Mfg:DALLAS Pack:1000 D/C:00-02 Vendor:Other Category:Other
The DS2415 1-Wire Time Chip offers a simple solution for storing and retrieving vital time information with minimal hardware. The DS2415 contains a unique, lasered ROM and a real time clock/calendar implemented as a bina...
Vendor:Other Category:Other
The DS2411 silicon serial number is a low-cost, electronic registration number with external power supply. It provides an absolutely unique identity that can be determined with a minimal electronic interface (typically, ...
Vendor:Other Category:Other
The DS2409T MicroLAN coupler is an essential component to build and control 1-Wire MicroLAN networks with multi-level branching. In contrast to approaches that switch the ground line, the coupler DS2409T maintains a comm...
Vendor:Other Category:Other
The DS2409R MicroLAN coupler is an essential component to build and control 1-Wire MicroLAN networks with multi-level branching. In contrast to approaches that switch the ground line, the coupler maintains a common groun...
Vendor:Other Category:Other
The DS2409P is designed as an essential component to build and control 1-wire microLAN networks with multi-level branching. In contrast to approaches that switch the ground line, the coupler maintains a common ground lev...
Mfg:MAXIM Vendor:Other Category:Other
The DS2409 MicroLAN coupler is an essential component to build and control 1-Wire MicroLAN networks with multi-level branching. In contrast to approaches that switch the ground line, the coupler maintains a common ground...
Vendor:Other Category:Other
The DS2408 is an 8-channel, programmable I/O 1-Wire chip. PIO outputs are configured as open-drain and provide an on resistance of 100 max. A robust PIO channel-access communication protocol ensures that PIO output-setti...
Vendor:Other Category:Other
The DS2407 Dual Addressable Switch Plus Memory is a pair of open drain Nchannel transistors that can be turned on or off via the 1Wire bus. Alternatively, either open drain output can serve as a logic input that can be m...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The DS2406 Dual Addressable Switch Plus Memory offers a simple way to remotely control a pair of open drain transistors and to monitor the logic level at each transistor's output via the 1-Wire bus for closed loop contro...
Mfg:DAL Vendor:Other Category:Other
Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC SWITCH ADDRESS NCH O-D TO-92The DS2405 Addressable Switch is an open drain N-channel transistor that can be turned on or off by matching the 64-bit factory-lasered registration number within each part. The 64-bit number consists of an 8-bit family ...
Mfg:DALLAS Pack:SSOP Vendor:Other Category:Other
The DS2404 EconoRAM Time Chip offers a simple solution for storing and retrieving vital data and time information with minimal hardware. The DS2404 contains a unique lasered ROM, real-time clock/calendar, interval timer,...
Mfg:DALLAS Pack:SOP6 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SILICON SERIAL NUMBER TO-92The DS2401 enhanced Silicon Serial Number is a low-cost, electronic registration number that providesan absolutely unique identity which can be determined with a minimal electronic interface, typically asingle port pin o...
Mfg:DALLAS D/C:07+ Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC TXRX DL RS-232 5V IND 16-SOIC The DS232A is a dual RS-232 driver/receiver pair that generates RS-232 voltage levels from a single +5- volt power supply. Additional ±12-volt supplies are not needed since the DS232A uses on-board charge pumps to c...
Vendor:Other Category:Other
The DS22EV5110 is a 6.75 Gbps (3 x 2.25 Gbps) extended reach equalizer optimized for DVI™and HDMI™ cable extension applications with a high performance re-clocking feature. It supports 3 Transition Minimized ...
Mfg:MAXIM Vendor:Other Category:Other
The DS2291 T1 Long Loop Stik contains all the circuitry necessary to recover clock and data from a T1 line. The DS2291 contains an Automatic Line Build Out (ALBO) circuit that allows it to adapt to T1 lines varying in le...
Mfg:Dallas Pack:SSTI D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC ISOLATION STIK T1 30-PINThe DS2290 T1 Isolation Stik provides all the surge and isolation protection that is necessary to connect a piece of equipment to a T1 line. It offers a function similar to that provided by a Data Access Arrangement (DAA...
Mfg:Dallas Pack:DIP D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC TXRX TRI 5V RS-232 20-DIPThe DS229 is a triple RS-232 driver/receiver pair that generates RS-232 voltage levels from a single +5-volt power supply. Additional ±12-volt supplies are not needed since the DS229 uses on-board chargepumps to convert ...
Mfg:MAXIM Vendor:Other Category:Other
The DS2282 completely controls the Facility Data Link(FDL) as described in the Bellcore document TRTSY000194 (Extended Superframe Format InterfaceSpecification December 1987) and the ANSI docu-ment T1.4031989 (Carrier t...
Vendor:Other Category:Other
The DS2252T Secure Microcontroller Module is an 8051-compatible microcontroller based onnonvolatile RAM technology. It is designed for systems that need to protect memory contents fromdisclosure. This includes key data, ...
Vendor:Other Category:Other
The DS2251T 128k Soft Microcontroller Module is an 8051-compatible microcontroller module based onnonvolatile RAM technology. It is designed for systems that need large quantities of nonvolatile memory.Like other members...
Mfg:Dallas D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC MICROCNTRLR 32X8 16MHZ 40SIMMThe DS2250(T) Soft Microcontroller Module is a fully 8051-compatible 8-bit CMOS microcontroller thatoffers "softness" in all aspects of its application. This is accomplished through the comprehensive use ofnonvolatile te...
Vendor:Other Category:Other
The DS2229 is an 8,388,608-bit low-power fully static Random Access Memory organized as a 524,888word by 16 bits using CMOS technology. The device employs the popular JEDEC standard 80-pin SIMMconnection scheme with no a...
Vendor:Other Category:Other
The DS2227 Flexible NV SRAM Stik is a self-contained 4,194,304-bit nonvolatile static RAM which canbe flexibly organized as 128k x 32 bits, 256k x 16 bits, or 512k x 8 bits. The nonvolatile memory containsall necessary c...
Mfg:DALLS D/C:2005 Vendor:Other Category:Other
The DS2223 and DS2224 EconoRAMs are fully static, micropowered, read/write memories in lowcost TO92 or SOT223 packages. The DS2223 is organized as a serial 256 x 1 bit static read/write memory.The DS2224's first 32 bits ...
Vendor:Other Category:Other
The DS2223 and DS2224 EconoRAMs are fully static, micropowered, read/write memories in lowcost TO92 or SOT223 packages. The DS2223 is organized as a serial 256 x 1 bit static read/write memory.The DS2224's first 32 bits ...
Vendor:Other Category:Other
Fast SCSI and Ultra SCSI require the use of active termination at both ends of every cable segment in a SCSI system with single ended drivers and receivers. Ultra SCSI requires the support of active negation and hot plug...
Vendor:Other Category:Other
Fast SCSI and Ultra SCSI require the use of active termination at both ends of every cable segment in a SCSI system with single ended drivers and receivers. Ultra SCSI requires the support of active negation and hot plug...
Vendor:Other Category:Other
Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in a SCSI system with singleended drivers and receivers. The DS21T16 SCSI Terminator, which is fully compliant with thes...
Mfg:DALLAS Pack:SOP/28 Vendor:Other Category:Other
Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in SCSI system with singleended drivers and receivers. Ultra SCSI requires support of active negation and hot plugging. ...
Mfg:1 Pack:DALLAS Vendor:Other Category:Other
The DS21T09 is intended for one-chip Plug and Play (PnP) SCSI termination. Plug and Play SCSIrequires the exit-point terminator on computer motherboards or host bus adapters to automatically switchoff if an external devi...
Mfg:TOSHIBA Pack:SOP D/C:1030 Vendor:Other Category:Other
Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in aSCSI system with single-ended drivers and receivers. The DS21T07 SCSI Terminator, which is fullycompliant with these...
Mfg:DALLAS Pack:SOP Vendor:Other Category:Other
Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in aSCSI system with single-ended drivers and receivers. The DS21T05 SCSI Terminator, which is fullycompliant with these...
Mfg:DALLAS Pack:SOP16 Vendor:Other Category:Other
Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in a SCSI system with singleended drivers and receivers. The DS21S07A SCSI Terminator, which is fully compliant with the...
Mfg:DALLAS D/C:07+ Vendor:Other Category:Other
A description of this device DS21Q59 can be found in the product data sheet. You can find the product data sheet at http://dbserv.maxim-ic.com/l_datasheet3.cfm.
Vendor:Other Category:Other
The DS21Q58 E1 quad transceiver contains all the necessary functions for connecting to four E1 lines.The DS21Q58 is a direct replacement for the DS21Q50, with the addition of signaling access and improved interrupt handl...
Mfg:Dallas Pack: BGA D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TRANSCEIVER E1 QUAD 5V 256BGAThe Quad T1 and E1 Transceiver MCMs offer a high density packaging arrangement for theDS21352/DS21552 T1 Single-Chip Transceivers and the DS21354/DS21554 E1 Single-Chip Transceivers.Four silicon die of one of thesedevice...
Mfg:Dallas Pack: BGA D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TRANSCEIVER T1 QUAD 5V 256BGAThe Quad T1 and E1 Transceiver MCMs offer a high density packaging arrangement for theDS21352/DS21552 T1 Single-Chip Transceivers and the DS21354/DS21554 E1 Single-Chip Transceivers.Four silicon die of one of thesedevice...
Mfg:Dallas Pack:BGA D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TXRX QUAD T1/E1/J1 SCT 256BGAThe DS21Q55 is a quad software-selectable T1, E1, or J1 MCM device for short-haul and long-haul applications. Each port is composed of a line interface unit (LIU), framer, HDLC controllers, and a TDM backplane interface,...
Mfg:DS Pack:QFP D/C:07+ Vendor:Other Category:Other
The DS21Q50 E1 quad transceiver contains all the necessary functions for connecting to four E1 lines. The on-board clock/data recovery circuitry coverts the AMI/HDB3 E1 waveforms to an NRZ serial stream. The DS21Q50 auto...
Mfg:Dallas Pack:BGA D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC LIU E1/T1/J1 QUAD 5V 144-BGAThe DS2148 is a complete selectable E1 or T1 Line Interface Unit (LIU) for short- and long-haul applications. Throughout the data sheet, J1 is represented wherever T1 exists. Receive sensitivity adjusts automatically to ...
Mfg:N/A Pack:QFP D/C:08+ Vendor:Other Category:Other
The DS21Q44 E1 is an enhanced version of the DS21Q43 Quad E1 Framer. The DS21Q44 contains fourframers that are configured and read through a common microprocessor compatible parallel port. Eachframer consists of a receiv...
Mfg:Dallas Pack:PQFP160-2828 Vendor:Other Category:Other
The DS21Q43A combines four of the popular DS2143 E1 Controllers onto a single monolithic die. The"A" designation denotes that some new features are available in the Quad version which were notavailable in thesingle E1 de...
Mfg:DALLAS Pack:BGA D/C:0630+ Vendor:Other Category:Other
The DS21Q42 is an enhanced version of the DS21Q41B Quad T1 Framer. The DS21Q42 contains fourframers that are configured and read through a common microprocessor compatible parallel port. Eachframer consists of a receive ...
Mfg:DALLAS Pack:QFP Vendor:Other Category:Other
The DS21Q41B combines four of the popular DS2141A T1 Controllers onto a single monolithic die. The"B" designation denotes that some new features are available in the Quad version that were not availablein the single T1 d...
Mfg:Dallas Pack: BGA D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TXRX T1/E1 QUAD 3.3V 256-BGAThe Quad T1 and E1 Transceiver MCMs offer a high density packaging arrangement for the DS21352/DS21552 T1 Single-Chip Transceivers and the DS21354/DS21554 E1 Single-Chip Transceivers.Four silicon die of one of thesedevic...
Mfg:DALLAS Pack:BGA D/C:07+ Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TXRX T1/E1 QUAD 3.3V 256-BGAThe DS21Q352 Quad T1 and E1 Transceiver MCMs offer a high density packaging arrangement for theDS21352/DS21552 T1 Single-Chip Transceivers and the DS21354/DS21554 E1 Single-Chip Transceivers.Four silicon die of one of th...
Mfg:Dallas D/C:8 Vendor:Dallas Semiconductor Category:Programmers, Development Systems
KIT DESIGN FOR DS21Q348The DS21Q348 design kit is an evaluation board for the DS21Q348 3.3V E1/T1/J1 line interface. The DS21Q348DK is intended to be used as a daughter card with either the DK2000 or the DK101 motherboards. The board comes com...
Mfg:Dallas Pack:BGA D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC FRAMER E1 4X3 12CH IND 300BGAThe 4 x 4 and 4 x 3 MCMs offer a high-density packaging arrangement for the DS21Q44 E1 enhanced quad framer. Either three (DS21FT44) or four (DS21FF44) silicon die of these devices is packaged in a multichip module (MCM)...
Mfg:Dallas Pack: BGA D/C:8 Vendor:Other Category:Other
The 4 x 4 and 4 x 3 MCMs offer a high-density packaging arrangement for the DS21Q44 E1 enhanced quad framer. Either three (DS21FT44) or four (DS21FF44) silicon die of these devices is packaged in a multichip module (MCM)...
Mfg:Dallas Pack:BGA D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC FRAMER T1 4X3 12CH IND 300BGAThe 4 x 4 and 4 x 3 multichip modules (MCM) offer a high-density packaging arrangement for the DS21Q42 T1 Enhanced Quad Framer. Either three (DS21FT42) or four (DS21FF42) silicon die of these devices is packaged in an MC...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC FRAMER T1 4X3 12CH 300-BGAThe Four x Four and Four x Three MCMs offer a high density packaging arrangement forthe DS21Q42 T1 Enhanced Quad Framer. Either three (DS21FT42) or four (DS21FF42)silicon die of these devices is packaged in a Multi-Chip ...
Vendor:Other Category:Other
The DS21FT40 MCM offers a high density packaging arrangement for the DS21Q44 E1 Enhanced QuadFramer. Three DS21Q44 silicon die are packaged in a Multi-Chip Module (MCM) with the electricalconnections as shown in Figure 1...
Mfg:Dallas Pack:BGA D/C:8 Vendor:Other Category:Other
The 4 x 4 and 4 x 3 MCMs offer a high-density packaging arrangement for the DS21Q44 E1 enhanced quad framer. Either three (DS21FT44) or four (DS21FF44) silicon die of these devices is packaged in a multichip module (MCM)...
Mfg:Dallas Pack: BGA D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC FRAMER E1 4X4 16CH 300-BGAThe 4 x 4 and 4 x 3 MCMs offer a high-density packaging arrangement for the DS21Q44 E1 enhanced quad framer. Either three (DS21FT44) or four (DS21FF44) silicon die of these devices is packaged in a multichip module (MCM)...
Mfg:Dallas Pack:BGA D/C:8 Vendor:Other Category:Other
The 4 x 4 and 4 x 3 multichip modules (MCM) offer a high-density packaging arrangement for the DS21Q42 T1 Enhanced Quad Framer. Either three (DS21FT42) or four (DS21FF42) silicon die of these devices is packaged in an MC...
Mfg:Dallas Pack: BGA D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC FRAMER T1 4X4 16CH 300-BGAThe Four x Four and Four x Three MCMs offer a high density packaging arrangement forthe DS21Q42 T1 Enhanced Quad Framer. Either three (DS21FT42) or four (DS21FF42)silicon die of these devices is packaged in a Multi-Chip ...
Vendor:Other Category:Other
The DS2196 T1 dual framer LIU is designed for T1 transmission equipment. The DS2196 combines dual optimized framers together with a LIU. This combination allows the users to extract and insert facility data-link (FDL) me...
Mfg:Dallas Pack:PDIP D/C:8 Vendor:Dallas Semiconductor Category:ICs, Integrated Circuits, Semiconductors
IC ATTENUATOR JTTR T1/CEPT 16DIPThe DS2188 T1/CEPT Jitter Attenuator Chip contains a 128 X 2-bit buffer which, in conjunction with anexternal 4X crystal, is used to attenuate the incoming jitter present in clock and data. The device meets allof the lat...
Mfg:Dallas Pack:PDIP D/C:8 Vendor:Other Category:Other
The DS2187 T1/CEPT Receive Line Interface chip interfaces user equipment to North American (T11.544 MHz) and European (CEPT 2.048 MHz) primary rate communication networks. The deviceextracts clock and data from twisted p...
Mfg:Dallas Pack:PDIP D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC TRANSMIT LINE INTERFACE 20DIPThe DS2186 T1/CEPT Transmit Line Interface Chip in-terfaces user equipment to North American (T11.544MHz) and European (CEPT2.048 MHz) primary ratecommunications networks. The device is compatiblewith all types of twiste...
Mfg:MAXIM Vendor:Other Category:Other
The DS2182A T1 Line Monitor Chip is a monolithic CMOS device designed to monitor real-timeperformance on T1lines. The DS2182A frames to the data on the line, counts errors, and suppliesdetailed information about the stat...
Mfg:Dallas Pack: PDIP D/C:04+ Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC TXRX CEPT PRIMARY RATE 40-DIPThe DS2181A is designed for use in CEPT networks and supports all logical requirements of CCITT Red Book Recommendations G.704, G.706 and G.732. The transmit side generates framing patterns and CRC4 codes, formats outgoi...
Mfg:Dallas Pack: PDIP D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TRANSCEIVER T1 40-DIPThe DS2180A is a monolithic CMOS device designed to implement primary rate (1.544 MHz) T-carriertransmission systems. The 193S framing mode is intended to support existing Ft/Fs applications (12frames/superframe). The193...
Mfg:Dallas Pack:PDIP D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC BUFFER RECEIVE T1 24-DIPThe DS2176 is a lowpower CMOS device specifically designed for synchronizing receive side looptimed Tcarrier data streams with system side timing. The device has several flexible operating modeswhich simplify interfacing...
Mfg:Dallas Pack:PDIP D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC ELASTIC STORE T1/CEPT 16-DIPThe DS2175 is a lowpower CMOS elasticstore memory optimized for use in primary rate telecommu-nications transmission equipment. The device serves as a synchronizing element between async datastreams and is compatible wit...
Vendor:Other Category:Other
The DS2174DK is a fully integrated demonstration kit for the DS2174 enhanced bit error-rate tester (BERT). This demo kit contains all the necessary circuitry to evaluate the device in all modes of operation. The boards a...
Vendor:Other Category:Other
The DS2174 enhanced bit error rate tester (EBERT) is a software-programmable test-pattern generator, receiver, and analyzer capable of meeting the most stringent error-performance requir ements of digital transmission fa...
Mfg:DALLAS D/C:07/08+ Vendor:Other Category:Other
The DS2172 Bit Error Rate Tester (BERT) is a software programmable test pattern generator, receiver, and analyzer capable of meeting the most stringent error performance requirements of digital transmission facilities. T...
Mfg:Dallas Pack: PLCC D/C:8 Vendor:Other Category:Other
The DS2165Q ADPCM processor chip is a dedicated digital-signal-processing (DSP) chip that has beenoptimized to perform adaptive-differential pulse-code modulation (ADPCM) speech compression at threedifferent rates. The c...
Mfg:Dallas Pack: PLCC D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC PROCESSOR ADPCM G.726 28-PLCCThe DS2164Q ADPCM processor chip is a dedicated digital-signal-processing (DSP) chip that has beenoptimized to perform adaptive-differential pulse-code modulation (ADPCM) speech compression at threedifferent rates. The c...
Mfg:DALLAS Pack:QFP D/C:01+ Vendor:Other Category:Other
The DS21610 is a multirate, low-jitter clock adapter that converts E-carrier and T-carrier clocks to multiple PDH carrier clock rates. Two clock outputs are available that are frequency-locked to the input clock. The clo...
Vendor:Other Category:Other
The DS21600/DS21602/DS21604 are multiple-rate clock adapters that convert between E-carrier and Tcarrier clocks rates. A T1 or E1 clock output,CLKOUT1, is available, along with a higher multiple rate clock output, CLKOUT...
Mfg:Dallas Pack:SOIC D/C:8 Vendor:Other Category:Other
The DS21600/DS21602/DS21604 are multiple-rate clock adapters that convert between E-carrier and Tcarrier clocks rates. A T1 or E1 clock output, CLKOUT1, is available, along with a higher multiple rate clock output, CLKOU...
Mfg:Dallas Pack:PDIP D/C:8 Vendor:Other Category:Other
The DS21600/DS21602/DS21604 are multiple-rate clock adapters that convert between E-carrier and Tcarrier clocks rates. A T1 or E1 clock output, CLKOUT1, is available, along with a higher multiple rate clock output, CLKOU...
Vendor:Other Category:Other
The DS21600/DS21602/DS21604 are multiple-rate clock adapters that convert between E-carrier and Tcarrier clocks rates. A T1 or E1 clock output,CLKOUT1, is available, along with a higher multiple rate clock output, CLKOUT...
Mfg:DALLAS D/C:07+ Vendor:Other Category:Other
The DS21600/DS21602/DS21604 are multiple-rate clock adapters that convert between E-carrier and Tcarrier clocks rates. A T1 or E1 clock output, CLKOUT1, is available, along with a higher multiple rate clock output, CLKOU...
Mfg:Dallas Pack:PDIP D/C:8 Vendor:Other Category:Other
The DS21600/DS21602/DS21604 are multiple-rate clock adapters that convert between E-carrier and Tcarrier clocks rates. A T1 or E1 clock output, CLKOUT1, is available, along with a higher multiple rate clock output, CLKOU...
Vendor:Other Category:Other
The DS21600/DS21602/DS21604 are multiple-rate clock adapters that convert between E-carrier and Tcarrier clocks rates. A T1 or E1 clock output,CLKOUT1, is available, along with a higher multiple rate clock output, CLKOUT...
Mfg:Dallas Pack: KIT D/C:8 Vendor:Maxim Integrated Products Category:Programmers, Development Systems
KIT DESIGN FOR DS2156The DS2155/DS2156 design kits are evaluation boards for the DS2155 and DS2156. The DS2155/DS2156 design kits are intended to be used as daughter cards with either the DK2000 or the DK101 motherboards. The boards are comp...
Vendor:Other Category:Other
The DS2156 is a software-selectable T1, E1, or J1 single-chip transceiver (SCT) for short-haul and long-haul applications. The backplane is user-configurable for a TDM or UTOPIA II bus interface. The DS2156 is composed o...
Mfg:Dallas Pack: KIT D/C:8 Vendor:Other Category:Other
The DS2155/DS2156 design kits are evaluation boards for the DS2155 and DS2156. The DS2155/DS2156 design kits are intended to be used as daughter cards with either the DK2000 or the DK101 motherboards. The boards are comp...
Mfg:DALLAS Pack:TQFP/100 Vendor:Other Category:Other
The DS21354/DS213554 single-chip transceivers (SCTs) contain all the necessary functions to connect to E1 lines. The devices are upward-compatible versions of the DS2153 and DS2154 SCTs. The on-board clock/data recovery ...
Mfg:DALLAS Pack:QFP Vendor:Other Category:Other
The DS21352/552 T1 single-chip transceiver contains all of the necessary functions for connection to T1lines whether they are DS1 long haul or DSX1 short haul. The DS21352/552 clock recovery circuitry automatically adjus...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.