© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The DS9006K SIP Stik Prototyping Kit includes a printed circuit board for prototyping SIP Stiks. The wire wrapped unit can then be housed in a molded enclosure for standalone applications. An application note explains ho...
Vendor:Other Category:Other
The DS9006 SIP Stik Motherboard is a developmental printed circuit board for prototyping circuit designs which utilize Stik prefabs and/or RJ11/45 connector schemes. Many SIP Stiks mate with connectors that have staggere...
Vendor:Other Category:Other
The DS9005 Eurocard Enclosure is a rugged, twopiece snap together plastic enclosure for any standalone system application. The DS9005 PCB is offset in the enclosure to allow for components such as transformers and SIP St...
Vendor:Other Category:Other
The DS9003 Cartridge Proto Board is a developmental printed circuit board for prototyping portable hand-held cartridges. The gold-plated card edge connections conform to the popular 28-pin bytewide DIP socket pinout when...
Vendor:Other Category:Other
The DS9002 Cartridge Housing is a rugged, two-piece snap together cartridge housing designed for use in any portable cartridge application. Components can be either through-hole mounted or surface mounted on both sides d...
Vendor:Other Category:Other
The DS9000 Bytewide Cable Harness is a specially designed cable harness which converts Dallas Semiconductor DS1217 Nonvolatile Read/Write Cartridges or any other 30-position card edge to the popular bytewide 28-pin DIP s...
Mfg:Dallas D/C:8 Vendor:Maxim Integrated Products Category:Programmers, Development Systems
EVAL KIT FOR DS89C450The DS89C450-K00 Evaluation Kit is a proven platform to conveniently evaluate the capabilities of the Ultra-High-Speed Flash Microcontroller family. The kit contains the DS89C450 in a DIP-40 socket, 128K of SRAM mapped t...
Vendor:Other Category:Other
The DS89C430, DS89C440, and DS89C450 offer the highest performance available in 8051-compatible microcontrollers. They feature newly designed processor cores that execute instructions up to 12 times faster than the origi...
Mfg:MAXIM Vendor:Other Category:Other
The DS89C430, DS89C440, and DS89C450 offer the highest performance available in 8051-compatible microcontrollers. They feature newly designed processor cores that execute instructions up to 12 times faster than the origi...
Mfg:DS Pack:DIP40 Vendor:Other Category:Other
The DS89C430, DS89C440, and DS89C450 offer the highest performance available in 8051-compatible microcontrollers. They feature newly designed processor cores that execute instructions up to 12 times faster than the origi...
Vendor:Other Category:Other
The DS89C420MNL belongs to DS89C420 family, which offers the highest performance available in 8051-compatible microcontrollers. It features a redesigned processor core that executes every 8051 instruction (depending on t...
Mfg:MAXIM Vendor:Other Category:Other
The DS89C420 offers the highest performance available in 8051-compatible microcontrollers. It features a redesigned processor core that executes every 8051 instruction (depending on the instruction type) up to 12 times f...
Vendor:Other Category:Other
The DS89C387 is a high speed twelve channel CMOS differential driver that meets the requirements of TIA/EIA-422-B. The DS89C387 features a low ICC specification of 1.5mA maximum, which makes it ideal for battery powered ...
Vendor:Other Category:Other
The DS89C386 is a high speed twelve channel CMOS differential receiver that meets the requirements of TIA/EIA-422-B. The DS89C386 features low power dissipation of 240 mW typical.
Each DS89C386 TRI-STATE® enable, EN...
Vendor:Other Category:Other
The DS89C21 is a differential CMOS line driver and receiver pair, designed to meet the requirements of TIA/EIA-422-A (RS-422) electrical characteristics interface standard. The DS89C21 provides one driver and one receive...
Mfg:NS Pack:400 D/C:n/a Vendor:Other Category:Other
The DS8973 is a 9-digit driver designed to operate from 3-cell battery supplies. Each driver will sink 100 mA to less than 0.7V when driven by only 0.1 mA. Each input is blocked by diodes so that the input can be driven ...
Mfg:NS Pack:DIP D/C:05+ Vendor:Other Category:Other
The DS8863 and DS8963 are designed to be used in conjunction with MOS integrated circuits and common-cathode LED's in serially addressed multi-digit displays.The DS8863 is an 8-digit driver. Each driver is capable of sin...
Pack:800 Vendor:Other Category:Other
The DS8935 is a dual driver/triple receiver device optimized to provide a single chip solution for a LocalTalk Interface.The DS8935 device provides one differential TIA/EIA-422 driver, one TIA/EIA-423 single ended driver...
Mfg:SOP D/C:2005+ Vendor:Other Category:Other
The DS8925 is a dual driver/triple receiver device optimized to provide a single chip solution for a LocalTalk Interface.The DS8925 device provides one differential TIA/EIA-422 driver, one TIA/EIA-423 single ended driver...
Vendor:Other Category:Other
The DS8922/22A and DS8923A are Dual Differential Line Driver and Receiver pairs. These devices are designed specifically for applications meeting the ST506, ST412 and ESDI Disk Drive Standards. In addition, the devices m...
Vendor:Other Category:Other
The DS8922/22A and DS8923A are Dual Differential Line Driver and Receiver pairs. These devices are designed specifically for applications meeting the ST506, ST412 and ESDI Disk Drive Standards. In addition, the devices m...
Mfg:DALLAS Pack:SMD Vendor:Other Category:Other
The DS8922/22A and DS8923A are Dual Differential Line Driver and Receiver pairs. These devices are designed specifically for applications meeting the ST506, ST412 and ESDI Disk Drive Standards. In addition, the devices m...
Vendor:Other Category:Other
The DS8921, DS8921A are Differential Line Driver and Receiver pairs designed specifically for applications meeting the ST506, ST412 and ESDI Disk Drive Standards. In addition, these devices meet the requirements of the E...
Mfg:DALLAS Pack:PLCC D/C:93 Vendor:Other Category:Other
The DS8911 is a digital Phase-Locked Loop (PLL) frequency synthesizer intended for use as a Local Oscillator (LO) in electronically tuned radios. The device is used in conjunction with a serial data controller, a loop fi...
Mfg:NS Pack:SOP20W D/C:2007+ Vendor:Other Category:Other
The DS8908B is a PLL synthesizer designed specifically for use in AM/FM radios. DS8908B contains the reference oscillator, a phase comparator, a charge pump, an operational amplifier, a 120 MHz ECL/I2L dual modulus progr...
Vendor:Other Category:Other
The DS8907 is a PLL synthesizer designed specifically for use in AM/FM radios. It contains the reference oscillator, a phase comparator, a charge pump, a 120 MHz ECL/I2L dual modulus programmable divider, and an 18-bit s...
Vendor:Other Category:Other
The DS8906 is a PLL synthesizer designed specifically for use in AM/FM radios. It contains the reference oscillator, a phase comparator, a charge pump, a 120 MHz ECL/I2L dual modulus programmable divider, and a 20-bit sh...
Mfg:DS Pack:DIP/16 Vendor:Other Category:Other
The DS78LS120 and DS88LS120 are high performance,dual differential, TTL compatible line receivers for both balancedand unbalanced digital data transmission. The inputsare compatible with EIA, Federal and MIL standards.Th...
Mfg:8 Vendor:Other Category:Other
The DS78C20 and DS88C20 are high performance, dual differential, CMOS compatible line receivers for both balanced and unbalanced digital data transmission. The inputs are compatible with EIA and Federal Standards.
Input...
Vendor:Other Category:Other
The DS8884A is designed to decode four lines of BCD input and drive seven-segment digits of gas-filled readout displays.All outputs of DS8884A consist of switchable and programmable current sinks which provide constant c...
Vendor:Other Category:Other
The DS8881 vacuum fluorescent display driver will drive 16-digit grids of a vacuum fluorescent display. The decode inputs select one of the sixteen outputs to be pulled high. The device contains an oscillator for supplyi...
Mfg:DIP Pack:160 D/C:DALLAS Vendor:Other Category:Other
The DS7880/DS8880 is custom designed to decode four lines of BCD and drive a gas-filled seven-segment display tube.
Each output constitutes a switchable, adjustable current sink which provides constant current to the tu...
Vendor:Other Category:Other
The DS8874 is a 9-digit LED driver which incorporates a shift register input decoding circuit and a low battery indicator. Outputs will sink 110 mA at less than 0.5V drop when sequentially selected. When the VCC supply f...
Mfg:NS Pack:DIP D/C:05+ Vendor:Other Category:Other
The DS8863 and DS8963 are designed to be used in conjunction with MOS integrated circuits and common-cathode LED's in serially addressed multi-digit displays.The DS8863 is an 8-digit driver. Each driver is capable of sin...
Mfg:NS Pack:DIP D/C:05+ Vendor:Other Category:Other
The DS8838 is a quad high speed driver/receiver designed for use in bus organized data transmission systems interconnected by terminated 120W impedance lines. The externatermination DS8838 is intended to be 180W resistor...
Mfg:NS Vendor:Other Category:Other
The DS7837/DS8837 are high speed receivers designed for use in bus organized data transmission systems interconnected by terminated 120X impedance lines. The external termination is intended to be 180X resistor from the ...
Mfg:TOSHIBA D/C:20 Vendor:Other Category:Other
This family of TRI-STATE bus transceivers offers extreme versatility in bus organized data transmission systems. The data bus may be unterminated, or terminated DC or AC, at one or both ends. Drivers in the third (high i...
Mfg:DIP Pack:1080 D/C:NS Vendor:Other Category:Other
This family of TRI-STATE bus transceivers offers extreme versatility in bus organized data transmission systems. The data bus may be unterminated, or terminated DC or AC, at one or both ends. Drivers in the third (high i...
Pack:800 Vendor:Other Category:Other
Through simple logic control, the DS7831/DS8831, DS7832/DS8832 can be used as either a quad single-ended line driver or a dual differential line driver. They are specifically designed for party line (bus-organized) syste...
Mfg:DIP Pack:930 D/C:NS Vendor:Other Category:Other
Through simple logic control, the DS7831/DS8831, DS7832/DS8832 can be used as either a quad single-ended line driver or a dual differential line driver. They are specifically designed for party line (bus-organized) syste...
Mfg:NS Vendor:Other Category:Other
The DS8830, SN55183, and SN75183 dual differential line drivers are designed to provide differential output signals with high current capability for driving balanced lines, such as twisted pair, at normal line impedances...
Mfg:TI Pack:DIP Vendor:Other Category:Other
The DS8820A, SN55182, and SN75182 dual differential line receivers are designed to sense small differential signals in the presence of large common-mode noise. These devices give TTLcompatible output signals as a functio...
Mfg:NS Pack:DIP D/C:02+ Vendor:Other Category:Other
The DS7820, specified from b55§C to a125§C, and the DS8820, specified from 0§C to a70§C, are digital line receivers with two completely independent units fabricated on a single silicon chip. Intended for use with digital...
Vendor:Other Category:Other
The DS87C550QCL is a member of the fastest 100% 8051-compatible microcontroller family available. The features of DS87C550QCL are: (1)DS87C550QCL; (2)On-chip Memory; (3)On-chip Analog to Digital Converter; (4)Pulse Width...
Mfg:Microchip Pack:DLCC44W D/C:-- Vendor:Other Category:Other
The DS87C550 EPROM High-Speed Microcontroller with ADC and PWM is a member of the fastest 100% 8051-compatible microcontroller family available. It features a redesigned processor core that removes wasted clock and memor...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC MCU EPR/ROM W/RTC 33MZ 52PLCCThe DS87C530-QCL is designed as EPROM micro with real time clock is an 8051-compatible microcontroller based on the dallas high-speed core.DS87C530-QCL has ten features. (1)80C52-compatible. (2)Large on-chip memory. (3)R...
Mfg:DALLAS Pack:PLCC D/C:1 Vendor:Other Category:Other
The DS87C530/DS83C530 EPROM/ROM microcontrollers with a real-time clock (RTC) are 8051-compatible microcontrollers based on the Dallas Semiconductor high-speed core. They use 4 clocks per instruction cycle instead of the...
Mfg:DALLAS Pack:PLCC Vendor:Other Category:Other
The DS87C520/DS83C520 EPROM/ROM high-speed microcontrollers are fast 8051-compatible microcontrollers. They feature a redesigned processor core without wasted clock and memory cycles. As a result, the devices execute eve...
Vendor:Other Category:Other
The DS87001 family of programming adapters converts the pins of the High-Speed Microcontroller Family in SMT packages to the 40-pin DIP footprint used by most device programmers. The following table details the available...
Vendor:Maxim Integrated Products Category:Programmers, Development Systems
IC MCU PROGRAMMER 110V 40-DIPThe DS87000 is a programming solution that provides a convenient, inexpensive method of programming Dallas Semiconductor's family of EPROM-based Microcontrollers. The system comes complete with the programmer, menu based...
Vendor:Other Category:Other
The DS8673 and DS8674 products are low power prescalers which divide by 64 and 256 respectively. The devices are used in frequency synthesis applications such as TV/CATV, cellular phone, and instrumentation to divide a v...
Vendor:Other Category:Other
The DS8673 and DS8674 products are low power prescalers which divide by 64 and 256 respectively. The devices are used in frequency synthesis applications such as TV/CATV, cellular phone, and instrumentation to divide a v...
Vendor:Other Category:Other
The DS8669 is a 2-digit BCD to 7-segment decoder/driver for use with common anode LED displays. The DS8669 drives 2 7-segment LED displays without multiplexing. Outputs are open-collector, and capable of sinking 25 mA/se...
Vendor:Other Category:Other
The DS8641N is one member of the DS8641 series.The DS8641 is a quad high speed drivers/receivers designed for use in bus organized data transmission systems interconnected by terminated 120 impedance lines.The external t...
Mfg:NS Vendor:Other Category:Other
The DS8641 is a quad high speed drivers/receivers designed for use in bus organized data transmission systems interconnected by terminated 120W impedance lines. The external termination is intended to be a 180W resistor ...
Mfg:NS Pack:DIP D/C:05+ Vendor:Other Category:Other
The DS7640 and DS8640 are quad 2-input receivers designed for use in bus organized data transmission systems interconnected by terminated 120X impedance lines. The external termination is intended to be 180X resistor fro...
Vendor:Other Category:Other
The DS8627 and DS8628 are low power fixed ratio prescalers which divide by 24 and 20, respectively. The inputs can be driven either single or double-ended and they are buffered, providing 40/100 mVrms input sensitivity. ...
Mfg:NS D/C:04+ Vendor:Other Category:Other
The DS8615 series products are low power dual modulus prescalers which divide by 32/33 and 40/41 respectively. The modulus control (MC) input selects division by N when at a high TTL level and division by N a 1 when at a...
Vendor:Other Category:Other
The DS87C530/DS83C530 EPROM/ROM microcontrollers with a real-time clock (RTC) are 8051-compatible microcontrollers based on the Dallas Semiconductor high-speed core. They use 4 clocks per instruction cycle instead of the...
Mfg:DALLAS Pack:PLCC44 D/C:07/08+ Vendor:Other Category:Other
The DS87C520/DS83C520 EPROM/ROM high-speed microcontrollers are fast 8051-compatible microcontrollers. They feature a redesigned processor core without wasted clock and memory cycles. As a result, the devices execute eve...
Vendor:Other Category:Other
The DS8313 supports 5V, 3V, and 1.8V smart cards. The absence of a charge pump reduces active power consumption, and the DS8313 also supports an ultra-low-power 10nA stop mode and the DS8313 smart card and SIM interface ...
Mfg:240 Pack:DALLAS Vendor:Other Category:Other
The DS80CH11 System Energy Manager is a highly integrated microcontroller that provides several key features for systems including key scanning and control, batteryand power management, as well as two 2Wire serial I/O Po...
Mfg:DALLAS Pack:TQFP D/C:0714+ Vendor:Other Category:Other
The Green Energy Manager DS80CH10 is a highly integrated microcontroller that provides several key features for portable systems including key scanning and control, battery and power management, hardware mouse and detach...
Vendor:Other Category:Other
The DS80C410/DS80C411 network microcontrollers offer the highest integration available in an 8051 device. Peripherals include a 10/100 Ethernet MAC, three serial ports, an optional CAN 2.0B controller, 1-Wire® Master...
Vendor:Other Category:Other
DS80C400 evaluation board (EV kit) is a terrace through verification. DS80C400 can simply evaluate the performance of DS80C400 networking MCU. This evaluation board includes DSTINIm400 evaluation module and is designed b...
Pack:2500 Vendor:Other Category:Other
The DSTINIm400 is a fully assembled and tested circuit board that evaluates the DS80C400 network microcontroller. In addition to the DS80C400, the DSTINIm400 includes a real-time clock, 1MB flash, 1MB static RAM, and sup...
Mfg:DALLAS Pack:QFP D/C:00+ Vendor:Other Category:Other
The DS80C390 is a fast 8051-compatible microprocessor with dual CAN 2.0B controllers. The redesigned processor core executes 8051 instructions up to 3X faster than the original for the same crystal speed. The DS80C390 su...
Mfg:DALLAS Vendor:Other Category:Other
The DS80C320/DS80C323 is a fast 80C31/80C32-compatible microcontroller. Wasted clock and memory cycles have been removed using a redesigned processor core. As a result, every 8051 instruction is executed between 1.5 and ...
Mfg:DALLAS Pack:PLCC Vendor:Other Category:Other
The DS80C320/DS80C323 is a fast 80C31/80C32-compatible microcontroller. Wasted clock and memory cycles have been removed using a redesigned processor core. As a result, every 8051 instruction is executed between 1.5 and ...
Pack:DIP Vendor:Other Category:Other
The DS80C310 is a fast 80C31/80C32-compatible microcontroller. It features a redesigned processor core without wasted clock and memory cycles. As a result, it executes every 8051 instruction between 1.5x and 3x faster th...
Vendor:Other Category:Other
Vendor:Other Category:Other
The DS8024 is a pin-for-pin drop-in replacement for the NXP TDA8024 and is offered in 28-pin TSSOP and SO packages. The DS8024 smart card interface IC is a low-cost, analog front-end for a smart card reader, designed for...
Vendor:Other Category:Other
The DS8023 is available in 28-pin TSSOP and SO packages, and can often be used as a replacement for the TDA8024 with little or no application changes. The DS8023 is designed to interface between a system microcontroller ...
Vendor:Other Category:Other
The DS8007A provides all electrical signals necessary to interface with two smart cards. The integrated voltage converter ensures full cross-compatibility between 1.8V/3V/5V cards and a 1.8V/3V/5V environment, and allows...
Vendor:Other Category:Other
The DS8005 is provided in a 28-pin SO package. The pinout is backwards compatible with the DS8313, allowing applications to use the same footprint and PCB for applications that communicate with either one or two smart ca...
Vendor:Other Category:Other
The DS78LS120 is a high performance, dual differential, TTL compatible line receiver for both balanced and unbalanced digital data transmission. The inputs are compatible with EIA, Federal and MIL standards.
The line re...
Vendor:Other Category:Other
The DS78L12 is a kind of low power TTL to MOS hex inverter element. The outputs may be "pulled up" to +14 V in the logical "1" state, thus providing guaranteed interface between TTL and MOS logic events. The gate may als...
Vendor:Other Category:Other
The DS78C20 and DS88C20 are high performance, dual differential, CMOS compatible line receivers for both balanced and unbalanced digital data transmission. The inputs are compatible with EIA and Federal Standards.
Input...
Vendor:Other Category:Other
The DS78C120 is a high performance, dual differential, CMOS compatible line receiver for both balanced and unbalanced digital data transmission. The inputs are compatible with EIA, Federal and MIL standards.
Input speci...
Vendor:Other Category:Other
The DS7880/DS8880 is custom designed to decode four lines of BCD and drive a gas-filled seven-segment display tube.
Each DS7880/DS8880 output constitutes a switchable, adjustable current sink which provides constant cur...
Vendor:Other Category:Other
The DS7837/DS8837 are high speed receivers designed for use in bus organized data transmission systems interconnected by terminated 120X impedance lines. The external termination is intended to be 180X resistor from the ...
Vendor:Other Category:Other
This family of TRI-STATE bus transceivers offers extreme versatility in bus organized data transmission systems. The data bus may be unterminated, or terminated DC or AC, at one or both ends. Drivers in the third (high i...
Vendor:Other Category:Other
This family of TRI-STATE bus transceivers offers extreme versatility in bus organized data transmission systems. The data bus may be unterminated, or terminated DC or AC, at one or both ends. Drivers in the third (high i...
Vendor:Other Category:Other
Through simple logic control, the DS7831/DS8831, DS7832/DS8832 can be used as either a quad single-ended line driver or a dual differential line driver. They are specifically designed for party line (bus-organized) syste...
Vendor:Other Category:Other
Through simple logic control, the DS7831/DS8831, DS7832/DS8832 can be used as either a quad single-ended line driver or a dual differential line driver. They are specifically designed for party line (bus-organized) syste...
Vendor:Other Category:Other
The DS7830/DS8830 is a dual differential line driver that also performs the dual four-input NAND or dual four-input AND function.TTL (Transistor-Transistor-Logic) multiple emitter inputs allow this line driver to interfa...
Vendor:Other Category:Other
The DS7820A and the DS8820A are improved performance digital line receivers with two completely independent units fabricated on a single silicon chip. Intended for use with digital systems connected by twisted pair lines...
Vendor:Other Category:Other
The DS7820, specified from b55§C to a125§C, and the DS8820, specified from 0§C to a70§C, are digital line receivers with two completely independent units fabricated on a single silicon chip. Intended for use with digital...
Vendor:Other Category:Other
The DS76KHz is a temperature-compensated crystal oscillator (TCXO) with an output frequency of 76.8 kHz. This device is available in commercial and industrial temperature versions, DS76KHz and DS76KHz-N respectively.
Th...
Vendor:Other Category:Other
The DS7640 and DS8640 are quad 2-input receivers designed for use in bus organized data transmission systems interconnected by terminated 120X impedance lines. The external termination is intended to be 180X resistor fro...
Vendor:Other Category:Other
Vendor:Other Category:Other
The DS75494 is a hex digit driver designed to interface between most MOS devices and common cathodes configured LED's with a low output voltage at high operating currents. The enable input disables all the outputs when t...
Mfg:DALLAS Pack:3000 Vendor:Other Category:Other
The DS75491 and DS75492 are interface circuits designed to be used in conjunction with MOS integrated circuits and common-cathode LEDs in serially addressed multi-digit displays. The number of drivers required for this t...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The DS7545X series of dual peripheral drivers is a family of versatile devices designed for use in systems that use TTL logic .Typical applications include high speed logic buffers,power drivers,relay drivers,lamp drever...
Mfg:NS Pack:2500 Vendor:Other Category:Other
The DS7545X series of dual peripheral drivers is a family of versatile devices designed for use in systems that use TTL logic .Typical applications include high speed logic buffers,power drivers,relay drivers,lamp drever...
Mfg:NS Pack:DIP D/C:07+ Vendor:Other Category:Other
The DS7545X series of dual peripheral drivers is a family of versatile devices designed for use in systems that use TTL logic .Typical applications include high speed logic buffers,power drivers,relay drivers,lamp drever...
Vendor:Other Category:Other
The DS7545X series of dual peripheral drivers is a family of versatile devices designed for use in systems that use TTL logic. Typical applications include high speed logic buffers, power drivers, relay drivers, lamp dri...
Mfg:SOP-8 Pack:NS D/C:2005+ Vendor:Other Category:Other
The DS7545X series of dual peripheral drivers is a family of versatile devices designed for use in systems that use TTL logic .Typical applications include high speed logic buffers,power drivers,relay drivers,lamp drever...
Mfg:NS Vendor:Other Category:Other
The DS75365 is a quad monolithic integrated TTL-to-MOS driver and interface circuit that accepts standard TTL input signals and provides high-current and high-voltage output evels suitable for driving MOS circuits. It is...
Mfg:NSC Vendor:Other Category:Other
The DS75361 is a monolithic integrated dual TTL-to-MOS driver interface circuit.The device accepts standard TTL input signals and provides high-current and high-voltage output levels for driving MOS circuits.It is used t...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.