DS9006

The DS9006 SIP Stik Motherboard is a developmental printed circuit board for prototyping circuit designs which utilize Stik prefabs and/or RJ11/45 connector schemes. Many SIP Stiks mate with connectors that have staggered rows of pins. This makes it difficult to prototype these modules since most off-the-shelf wire wrap boards have a grid of 0.1" center holes. The DS9006 contains several rows of holes that are offset to accommodate both SIP Stiks and standard 300 mil and 600 mil DIPs.

Hole patterns for three RJ11/45, one 9-pin D-SUB, and 64/96-pin Eurocard connectors are located on the ends of the PCB in a right angle fashion to enable the finished circuit board assembly to mount in the DS9005 enclosure. This allows the designer to have a "complete" looking unit for presentation while still in the prototyping stage of design.