Features: *Receiver hysteresis 400 mV typ*Receiver noise immunity 1.4V typ*Bus terminal current for 80 mA max normal VCC or VCC e 0V*Receivers Sink 16 mA at 0.4V max Source 2.0 mA (Mil) at 2.4V min 5.2 mA (Com) at 2.4V min*Drivers Sink 50 mA at 0.5V max 32 mA at 0.4V max Source 10.4 mA (Com) at 2....
DS7833: Features: *Receiver hysteresis 400 mV typ*Receiver noise immunity 1.4V typ*Bus terminal current for 80 mA max normal VCC or VCC e 0V*Receivers Sink 16 mA at 0.4V max Source 2.0 mA (Mil) at 2.4V min ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
This family of TRI-STATE bus transceivers offers extreme versatility in bus organized data transmission systems. The data bus may be unterminated, or terminated DC or AC, at one or both ends. Drivers in the third (high impedance) state load the data bus with a negligible leakage current. The receiver input current is low allowing at least 100 driver/receiver pairs to utilize a single bus. The bus loading is unchanged when VCC e 0V. The receiver incorporates hysteresis to provide greater noise immunity. All devices utilize a high current TRI-STATE output driver. The DS7833/ DS8833 and DS7835/DS8835 employ TRI-STATE outputs on the receiver also.
The DS7833/DS8833 are non-inverting quad transceivers with a common inverter driver disable control and common inverter receiver disable control. The DS7835/DS8835 are inverting quad transceivers with a common inverter driver disable control and a common inverter receiver disable control.