Position: Home  > All Categories> Integrated Circuits (ICs) > DS2196

DS2196

Features: Two full -featured framers and a short/long-haul line interface unit (LIU) in one small package Based on Dallas Semiconductor's single -chip transceiver (SCT) family Two HDLC controllers with 64-byte buffers that can be used for the FDL or DS0 channels Supports NPRMs and SPRMs as per ...

product image

DS2196 Picture
See larger image
SeekIC No. : 004328810 Detail

DS2196: Features: Two full -featured framers and a short/long-haul line interface unit (LIU) in one small package Based on Dallas Semiconductor's single -chip transceiver (SCT) family Two HDLC controllers...

DS2196 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
DS2196
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/12/21

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

 Two full -featured framers and a short/long-haul line interface unit (LIU) in one small package
  Based on Dallas Semiconductor's single -chip transceiver (SCT) family 
  Two HDLC controllers with 64-byte buffers that can be used for the FDL or DS0 channels
  Supports NPRMs and SPRMs as per ANSI T1.403-1998
  Can be combined with a short/long-haul LIU or a HDSL modem chipset to create a low-cost office
 repeater/NIU/CSU, or a HDSL1/HDSL2 terminal unit with enhanced monitoring and data link control 
  Supports fractional T1
  Can convert from D4 to ESF framing and ESF to D4 framing
  Can generate and detect repeating in-bandpatterns from 1 to 8 bits or 16 bits in length
  Detects and generates RAI-CI and AIS-CI
  Generates DS1 idle codes
  On-chip programmable BERT generator and detector
  All key signals are routed to pins to support numerous hardware configurations
  Supports both NRZ and bipolar interfaces
  Can create errors in the F-bit position and BERT interface data paths
  8-bit parallel control port that can be used directly on either multiplexed or nonmultiplexed buses (Intel or Motorola)
  IEEE 1149.1 JTAG Boundary Scan
  100-pin LQFP (14 mm x 14 mm) package


Specifications

Voltage on Any Lead with respect to VSS (except VDD) .... .0.3V to +5.5V
upply voltage (VDD) with Respect to VSS ..........................0.3V to +3.63V
Operating Temperature for DS2196L   ...................................0ºC to +70ºC
Operating Temperature for DS2196LN ...................... ........40ºC to +85ºC
torage Temperature .........................................................55ºC to +125ºC
oldering Temper......................................ature See J-STD-020A specification


Description

The DS2196 T1 dual framer LIU is designed for T1 transmission equipment. The DS2196 combines dual optimized framers together with a LIU. This combination allows the users to extract and insert facility data-link (FDL) messages in the receive and transmit paths, collect line performance data, and perform basic channel conditioning and maintenance.

The DS2196 contains all of the necessary functions for connection to T1 lines whether they are DS1 long haul or DSX1 short haul. The clock recovery circuitry automatically adjusts to T1 lines from 0ft to over 6000ft in length. The device can generate both DSX1 line buildouts as well as CSU line buildouts of -7.5dB, -15dB,and -22.5dB. The on-board jitter attenuator (selectable to either 32 bits or 128 bits) can be placed in either the transmit or receive data paths.

The framer locates the frame and multiframe boundaries and monitors the data stream for alarms. The device contains a set of internal registers that the user can access and use to control the unit's operation of the unit. Quick access through the parallel control port allows a single controller to handle many T1 lines. The device fully meets all of the latest T1 specifications.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Fans, Thermal Management
3610ML-05W-B49
1608KL-05W-B39
Static Control, ESD, Clean Room Products
DPA5
PA800-A41
Industrial Controls, Meters
SGDM-15ADA
41AA1600E
Semiconductor Modules
2DI300A-050-03
7MBR25SA-120-50
Boxes, Enclosures, Racks
ACLSN12
ACLJIC
Sensors, Transducers
GP2Y0D340K
PAN3509DH-TXWA
View more