© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The LB1657M is a dual bridge driver IC suited for apply in 2-phase bipolar stepping motor driver for FDD(3 to 5.25 in- ches)head actuator. The maximun driver current*volatage is 0.33A*12V/bridge.
The LB1657M has the fol...
Vendor:Other Category:Other
The LB1656M is designed as one kind of 2-phase stepping motor driver that is suited for use for FDD (3 to 5.25 inches) head actiator. The maximum driver current x voltage is 0.33 A x 12 V / bridge.
Features of the LB165...
Vendor:Other Category:Other
The LB1656 is designed as one kind of 2-phase stepping motor driver that is suited for use for FDD (3 to 5.25 inches) head actiator. The maximum driver current x voltage is 0.33 A x 12 V / bridge.
Features of the LB1656...
Vendor:Other Category:Other
Mfg:SANYO Pack:DIP Vendor:Other Category:Other
Vendor:Other Category:Other
The LB1650 is designed as one kind of dual bidirectional motor driver. Since each channel has a 2-input logic circuit and performs bidirectional driving and braking functions, it is capable of direct driving 2 pcs. of mo...
Vendor:Other Category:Other
The LB1649 is designed as one kind of dual bidirectional motor driver. Since each channel has a 2-input logic circuit and performs bidirectional driving and braking functions, it is capable of direct driving 2 pcs. of mo...
Vendor:Other Category:Other
The LB1648 is a bidirectional motor driver IC. Since it has a 2-input logic circuit and performs the functions of bidirectional driving and braking, iy is capable of direct driving 6 V, 9V, 12 V motors. The output voltag...
Vendor:Other Category:Other
The LB1646 is a bidirectional motor driver IC. Since it has a 2-input logic circuit and performs the functions of bidirectional driving and braking, iy is capable of direct driving 6 V, 9V, 12 V motors. The output voltag...
Vendor:Other Category:Other
The LB1645N is a bidirectional motor driver IC. Since it has a 2-input logic circuit and performs the functions of bidirectional driving and braking, iy is capable of direct driving 6 V, 9V, 12 V motors. The output volta...
Vendor:Other Category:Other
The LB1644 is designed as the forward / reverse motor driver IC. The direction and brake functions are controlled from a single input, and the output voltages can be set by resistors. Further, the output voltage has 3 mo...
Vendor:Other Category:Other
The LB1643 is designed as the forward / reverse motor driver IC. The direction and brake functions are controlled from a single input, and the output voltages can be set by resistors. Further, the output voltage has 3 mo...
Vendor:Other Category:Other
The LB1642B is a bidirectional motor driver IC. It is especially suited for use in motor drive applications where the arm control function of a player or the auto reverse function of a cassette deck is performed.
Featur...
Vendor:Other Category:Other
The LB1642 is a bidirectional motor driver IC. Since it has a 2-input logic circuit and performs the functions of bidirectional driving and braking, iy is capable of direct driving 6 V, 9V, 12 V motors. The output voltag...
Vendor:Other Category:Other
The LB1641 is a bidirectional motor driver IC. Since it has a 2-input logic circuit and performs the functions of bidirectional driving and braking, iy is capable of direct driving 6 V, 9V, 12 V motors. The output voltag...
Mfg:SANYO Pack:ZIP D/C:05+ Vendor:Other Category:Other
Vendor:Other Category:Other
The LB1638M, 1638M are low-saturation bidirectional motor driver ICs for use in low-voltage applications. At an IO of 500 mA, they have a low saturation output of VO (sat) =0.75 V. They are especially suited for use in c...
Vendor:Other Category:Other
The LB1638, 1638M are low-saturation bidirectional motor driver ICs for use in low-voltage applications. At an IO of 500 mA, they have a low saturation output of VO (sat) =0.75 V. They are especially suited for use in co...
Vendor:Other Category:Other
The LB1636M is a low-saturation bidirectional motor driver IC for use in low-voltage applications.It is especially suited for use in small-sized low-voltage motors for printers,cassette tape recordrers ,and commercial eq...
Mfg:SANYO Pack:SOP-10P D/C:03+ Vendor:Other Category:Other
Vendor:Other Category:Other
The LB1634 is designed as the low saturation forward / reverse motor driver IC. The output saturation voltage is a low 1.4 V for a 1 A output current, making it ideal for use in portable electronic equipment where maximu...
Vendor:Other Category:Other
The LB1633M is one member of the LB1633 family which is designed as the low saturation stepping motor driver IC for use in low voltage applications. This device especially suitable for use in portable equipment such as p...
Vendor:Other Category:Other
The LB1630 is a low-saturation bidirectional motor driver IC for use in low-voltage applications. It is especially suited for in small sized low-voltage motor for printers, cassette tape recorders, and consumer equipment...
Mfg:SANYO Pack:DIP Vendor:Other Category:Other
Vendor:Other Category:Other
The LB1619M is a 3-phase brushless motor driver IC ideally suited for use in VTR capstan motor driver, drum motor driver applications.
The features of LB1619M can be summarized as (1)120° voltage linear type; (2)speed c...
Vendor:Other Category:Other
The LB1617M is a 3-phase brushless motor driver IC ideally suited for use in movoe VTR capstan motor driver, drum motor driver, and DAT motor driver applications. If you want to know more about this IC, please go to our ...
Vendor:Other Category:Other
The LB1609 is a bidirectional motor driver IC. Since it has a 2-input logic circuit and performs the functions of bidirectional driving and braking, iy is capable of direct driving 6 V, 9V, 12 V motors. The output voltag...
Vendor:Other Category:Other
The allowable operating condition at 25 and the suply voltage rang VCC: 8.5 to 16V(sample application circuit 1)/8.0 to 16V(sample application circuit 2). Here date will give a general idea about the LB1475M, if you want...
Vendor:Other Category:Other
The LB1416 is an AC/DC voltage level meter.
Features of the LB1416 are:(1)indication format:The input level is indicated in the form of a bar by means of 5 LEDs (green/red LED:drivable); (2)input amplifier:2 half-wave r...
Mfg:SANYO Pack:SOP D/C:05+ Vendor:Other Category:Other
Mfg:SANYO Pack:DIP-22 D/C:95+ Vendor:Other Category:Other
Vendor:Other Category:Other
The LB1411 is intended for 10-LED display signel meter applications.It is especially suited for use in 3V-powered small-sized radios.
Features of the LB1411 are:(1)operable from low voltage; (2)minimum number of extern...
Vendor:Other Category:Other
The LB1410 is a monolithic digital IC level meter.
Features of the LB1410 are:(1)Ten red or green LEDs display the input level in the shape of a bar; (2)wide application is available owing to the built-in DC amplifier w...
Mfg:SANYO Pack:DIP Vendor:Other Category:Other
Vendor:Other Category:Other
The LB1408 is a monolithic digital IC level meter.
Features of the LB1408 are:(1)an input amplifier is built in; (2)minimum number of external parts required; (3)low current dissipation because of series connection of L...
Vendor:Other Category:Other
The LB1407 is an AC/DC voltage level meter.
Features of the LB1407 are:(1)The LB1407 is based on dB scale and linear scale respectively; (2)the input level is indicated in the form of a bar by means of 7 red/green LEDs;...
Vendor:Other Category:Other
The LB1405 is a level meter.AC level meters such as VU meters;DC level meters such as signal meters;supply voltage(battery,etc.)detection meters.
Features of the LB1405 are:(1)2 types of LB1405 available depending on co...
Vendor:Other Category:Other
Vendor:Other Category:Other
The LB1394 is designed as one kind of 6-channel driver array with pull-down equivalent resistors, no externally connected resistors are required for ghost prevention. When the input voltage is at a high level, the output...
Vendor:Other Category:Other
The LB1393 is designed as one kind of 6-channel driver array with pull-down equivalent resistors, no externally connected resistors are required for ghost prevention. When the input voltage is at a high level, the output...
Vendor:Other Category:Other
The LB1292 is designed for interfacing low level device with fluorescent display tube. 6 independent Darlington output stages can be used to drive digits or segments. With pull-down equivalent resistor built in, no exter...
Vendor:Other Category:Other
The LB1291 has been designed for interfacing between low level digital device and flirescent display tubes. Its 8-channnel independent darlington output stage is applied for digit or segment drivers. Meanwhile, with pull...
Vendor:Other Category:Other
The LB1290 has been designed for interfacing between low level digital devices and fluorescent display tubes Its 8-channel independent Darlington output stage is used for digit or segment drivers. Also, with pull-dow equ...
Vendor:Other Category:Other
The LB1287 has circuit configuration of 5-unit Darlington transistor array consisting of NPN transistors and are capable of causing small input current to provide large current drive. They can be advantageously incorpora...
Vendor:Other Category:Other
The LB1276 is an LED driver array. By connecting this IC to LSI output pins whose output current capacity is small, LEDs can be lighted. It features high sensitivity (I N=80uAmax.) and IoUT=30mA driving capacity and is i...
Vendor:Other Category:Other
The LB1275 is a 7-unit darling transistor, which is specially designed for printer deriver,lamp or relay driver.Protector diode against negtive input are used by which it is easy to design drive circuits of a calculator ...
Vendor:Other Category:Other
The LB1274 is designed as a 6-unit darlington transistor array with NPN transistors. This IC is ideal for driving printers, replays and lamps. Protective diodes guard against negative inputs. Thus it has advantages when ...
Vendor:Other Category:Other
The circuit construction of LB1273R is a darlington transistor array with six units, most suitable for printer hammer drive, lamp, and relay drive. With built-in protective diodes against negative inputs, it is advantage...
Vendor:Other Category:Other
The circuit configuration of LB1272 is a 6-unit Darlington transistor array consisting of NPN transistors and is ideally suited for use in printer hammer driving, lamp or relay driving applications. With the built-in pro...
Vendor:Other Category:Other
The LB1268 is a type of 3-channel,high-current,low-saturation driver array.The LB1268 has the following features:(1)3-channel magnet driver;(2)high current(2.0A max.)and low saturation voltage(1.5V);(3)parallel operati...
Vendor:Other Category:Other
The LB1267 is a kind of 2-channel, high-current, low-saturation driver array. If you want to know about this IC, please go to our website.
The features of LB1267 can be summarized as (1)2-channel magnet driver; (2)high ...
Vendor:Other Category:Other
The LB1258 is a 7-unit driver array with large current,low saturation output.It is suited for low voltage large current drivers.
The LB1258 has the following features:(1)large current capacity(500mA)and a low saturatio...
Vendor:Other Category:Other
The LB1256M is a 7-units driver array,prossessing high-current,low-saturating outputs.It has a motor drive circuuit equipped with a brake circuit. It is suitable for low voltage,high-current driver use.
The LB1256M has ...
Vendor:Other Category:Other
The LB1249 is an active-low input,8-unit,high-current,low-saturation driver.
Features of the LB1249 are:(1)low active input type; (2)on-chip input protecting diodes; (3)high current capacity(400mA) and low saturation ...
Vendor:Other Category:Other
The LB1247 is a low active input type 8-unit driver array with high current,low saturation output.
Features of the LB1247 are:(1)low active input type; (2)input protecting diodes; (3)high current capacity(400mA) and low...
Vendor:Other Category:Other
The LB1246 is a 7-channel driver array with large current,low saturation output and contains a motor driver with brake circuit.It is suited for use in low active input,low voltage,large current driver applications.
Feat...
Vendor:Other Category:Other
The LB1245 has been designed for interfacing low-level digital devices to fluorescent display tubes.Its 8-channel independent darlington output stage is used for digit and segment drivers.Equivalent pull-down resistors a...
Vendor:Other Category:Other
The LB1241 has been designed for interfacing low-level digital devices to fluorescent display tubes.Its 8-channel independent darlington output stage is used for digit and segment drivers.Equivalent pull-down resistors a...
Vendor:Other Category:Other
The LB1240 has been designed for interfacing low-level digital devices to fluorescent display tubes.Its 8-channel independent darlington output stage is used for digit and segment drivers.Equivalent pull-down resistors a...
Mfg:SANYO Pack:SOP-16P D/C:03+ Vendor:Other Category:Other
The LB1213M is a general-purpose transistor array containing 7 channels. It is especially suited for driving LEDs, lamps, small-sized relays, etc.
Vendor:Other Category:Other
Mfg:SANYO Pack:DIP Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:N/A Pack:N/A D/C:N/A Vendor:Other Category:Other
Vendor:Other Category:Other
The LB11997H is a 3-phase brushless motor driver especially suited for CD-ROM spindle motor drives.
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:SANYO Pack:SMD Vendor:Other Category:Other
The LB11995H is a 3-phase brushless motor driver especially suited for CD-ROM spindle motor drives.
Mfg:SANYO Pack:N/A D/C:110 Vendor:Other Category:Other
The LB11995 is a 3-phase brushless motor driver especially suited for CD-ROM spindle motor drives.
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The LB11983 is a 3-phase full-wave current linear sensorless motor driver. It is optimal for refrigerator fan motor drive.
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:46 Pack:SANYO Vendor:Other Category:Other
The LB11975 is a monolithic bipolar IC developed for uses as a spindle motor driver for high-speed CD-ROM and DVD-ROM drives. To minimize heat generation during high-speed rotation and braking, the LB11975 adopts direct ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The LB11967V is a single-phase bipolar variable speed fan motor predriver that works with an external PWM signal. A highly efficient, quiet and low power consumption motor driver circuit, with a large variable speed, can...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:SANYO Pack:MSOP-8P D/C:03+ Vendor:Other Category:Other
Mfg:SANYO Pack:N/A D/C:06+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The LB11961 is a single-phase bipolar drive motor driver that easily implements direct PWM motor drive systems withexcellent efficiency. The LB11961 is optimal for fan motor drive in personal computer power supply system...
Vendor:Other Category:Other
Vendor:Other Category:Other
The LB11946 is a stepping motor driver IC that implements PWM current control bipolar drive with a fixed off time. This IC features 15 current setting levels using a fixed VREF voltage and support for microstepping drive...
Vendor:Other Category:Other
The LB11923V is a pre-driver IC designed for variablespeed control of 3-phase brushless motors. It can be used to implement a motor drive circuit with the desired output capacity (voltage, current) by using discrete tran...
Mfg:SANYO Pack:SSOP D/C:N/A Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The LB11920 is a direct PWM drive motor driver IC for 3-phase power brushless motors. The PWM duty can be controlled by IC inputs, and it can be used over the wide supply voltage range of 9.5 to 30 V.
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:SANYO Pack:DIP Vendor:Other Category:Other
The LB11880 is a sensorless motor driver that also includes a loading motor driver. It is ideal for drum motor drive in VCR products.
Mfg:SANYO Pack:SOP-48 D/C:03+ Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.