© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:N/A Pack:. D/C:08+ Vendor:Other Category:Other
The Multiple Rate Digital Switch (MRDX) MT8986 is an pgraded version of Zarlink's MT8980D Digital witch (DX). It is pin compatible with the MT8980D nd retains all of its functionality. This MT8986 is esigned to provide ...
Vendor:Other Category:Other
The MT8985AP is a kind of enhanced digital switch device which is an upgraded version of the popular MT8980D Digital Switch (DX). It is pin compatible with the MT8980D and retains all of the MT8980D's functionality. The ...
Mfg:MITEL Pack:DIP Vendor:Other Category:Other
The MT8985AE Enhanced Digital Switch device is an upgraded version of the popular MT8980D Digital Switch (DX). It is pin compatible with the MT8980D and retains all of the MT8980D's functionality. This VLSI device is des...
Mfg:MIT Vendor:Other Category:Other
The MT8985 Enhanced Digital Switch device is an upgraded version of the popular MT8980D Digital Switch (DX). It is pin compatible with the MT8980D and retains all of the MT8980D's functionality. This VLSI device is desig...
Mfg:MT Pack:DIP Vendor:Other Category:Other
The MT8982AE Small Digital Switch (MiniDX) is a nonblocking CMOS time switch with a capacity of up to 64 - 8 bit Time Division Multiplexed (TDM) encoded voice or data channels. MT8982AE is a size-optimized version of MIT...
Mfg:MT Pack:SMD D/C:07/08+ Vendor:Other Category:Other
The MT8982 Small Digital Switch (MiniDX) is a nonblocking CMOS time switch with a capacity of up to 64 - 8 bit Time Division Multiplexed (TDM) encoded voice or data channels. MT8982 is a size-optimized version of MITEL's...
Vendor:Other Category:Other
The MT8981DP is a kind of VLSI ISO-CMOS device which is designed for switching PCM-encoded voice or data, under microprocessor control, in a modern digital exchange, PBX or Central Office. The device provides simultaneou...
Vendor:Other Category:Other
The MT8981DE is designed as the VLSI ISO-CMOS device that provides microprocessor read and write access to individual ST-BUS channels. Features of this MT8981DE are:(1)Mitel ST-BUS compatible; (2)4-line x 32-channel inpu...
Vendor:Other Category:Other
The MT8981DC is designed as the VLSI ISO-CMOS device that provides microprocessor read and write access to individual ST-BUS channels. Features of this MT8981DC are:(1)Mitel ST-BUS compatible; (2)4-line x 32-channel inpu...
Vendor:Other Category:Other
This VLSI ISO-CMOS device MT8981D is designed for switching PCM-encoded voice or data, under microprocessor control, in a modern digital exchange, PBX or Central Office. It provides simultaneous connections for up to 128...
Vendor:Other Category:Other
The MT8980DP is designed as the VLSI ISO-CMOS device that provides microprocessor read and write access to individual ST-BUS channels. Features of this MT8980DP are:(1)Mitel ST-BUS compatible; (2)8-line x 32-channel inpu...
Mfg:MT Pack:1993 Vendor:Other Category:Other
This VLSI ISO-CMOS device MT8980DE is designed for switching PCM-encoded voice or data, under microprocessor control, in a modern digital exchange, PBX or Central Office. MT8980DE provides simultaneous connections for up...
Mfg:MITEL D/C:1000 Vendor:Other Category:Other
This VLSI ISO-CMOS device MT8980D is designed for switching PCM-encoded voice or data, under microprocessor control, in a modern digital exchange, PBX or Central Office. It provides simultaneous connections for up...
Mfg:MT Pack:PLCC Vendor:Other Category:Other
The MT8979AP is a single chip CEPT digital trunk transceiver that meets the requirements of CCITT Recommendation G.704 for digital multiplex equipment.The MT8979AP is fabricated in Mitel's low power ISO-CMOS technology.
Mfg:MIT Pack:DIP Vendor:Other Category:Other
The MT8979AE is a single chip CEPT digital trunk transceiver that meets the requirements of CCITT Recommendation G.704 for digital multiplex equipment.The MT8979AE is fabricated in Mitel's low power ISO-CMOS technology.
Mfg:ZARLINK Vendor:Other Category:Other
The MT8979AC is a single chip CEPT digital trunk transceiver that meets the requirements of CCITT Recommendation G.704 for digital multiplex equipment.The MT8979AC is fabricated in Mitel's low power ISO-CMOS technology.
Mfg:MT Pack:PLCC Vendor:Other Category:Other
The MT8979 is a single chip CEPT digital trunk transceiver that meets the requirements of CCITT Recommendation G.704 for digital multiplex equipment.The MT8979 is fabricated in Mitel's low power ISO-CMOS technology.
Mfg:ZARLINK Pack:DIP D/C:06+/07+ Vendor:Other Category:Other
The MT8977AE is a variant of the MT8976 framer,which has been enhanced to meet ACCUNET® T1.5 wander tolerance (138 UI). The MT8977AE meets ESF and D3/D4 formats, and is compatible with SLC-96 systems.
Mfg:MITEL Pack:04+ D/C:10 Vendor:Other Category:Other
The MT8977 is a variant of the MT8976 framer, which has been enhanced to meet ACCUNET® T1.5 wander tolerance (138 UI).The MT8977 meets ESF and D3/D4 formats, and is compatible with SLC-96 systems
Vendor:Other Category:Other
The MT8976AC is a kind of Mitel's second generation T1 interface solution. The device meets the Extended Super Frame format (ESF), the current D3/D4 format and is compatible with SLC-96 systems. In addition, the MT8976AC...
Mfg:MIT Vendor:Other Category:Other
The MT8976 is Zarlink's second generation T1 interface solution. The MT8976 meets the Extended Super Frame format (ESF), the current D3/D4 format and is compatible with SLC-96 systems.The MT8976 interfaces to DS1 1.544 M...
Vendor:Other Category:Other
The MT8971B (DSIC) and MT8972B (DNIC) are multi-function devices capable of providing high speed, full duplex digital transmission up to 160kbit/s over a twisted wire pair. MT8972B use adaptive echo-cancelling techn...
Vendor:Other Category:Other
The MT8971B (DSIC) and MT8972B (DNIC) are multi-function devices capable of providing high speed, full duplex digital transmission up to 160kbit/s over a twisted wire pair. MT8971B use adaptive echo-cancelling techn...
Mfg:MITEL Pack:N/A D/C:09+ Vendor:Other Category:Other
Manufactured in ISO2-CMOS, these integrated filter/codecs MT8967 are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones.
Mfg:MT Pack:SMD D/C:07/08+ Vendor:Other Category:Other
Manufactured in ISO2-CMOS, these integrated filter/codecs MT8966 are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones.
Mfg:MITEL Pack:DIP D/C:00+ Vendor:Other Category:Other
Manufactured in ISO2-CMOS, these integrated filter/codecs MT8965 are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones.
Vendor:Other Category:Other
The MT8964AC is designed as integrated PCM filter codec. Manufactured in ISO2-CMOS, these integrated filter/ codecs are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., P...
Vendor:Other Category:Other
Manufactured in ISO2-CMOS, these integrated filter/codecs MT8964 are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones.
Mfg:MT D/C:1200
Vendor:Other Category:Other
Manufactured in ISO2-CMOS, these integrated filter/codecs MT8963 are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones.
Mfg:HARRIS D/C:N/A Vendor:Other Category:Other
Manufactured in ISO2-CMOS, these integrated filter/codecs MT8962 are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones.
Vendor:Other Category:Other
Manufactured in ISO2-CMOS, these integrated filter/codecs MT8961 are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones.
Vendor:Other Category:Other
Manufactured in ISO2-CMOS, these integrated filter/codecs MT8960 are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones.
Vendor:Other Category:Other
The MT8952BE is a kind of HDLC protocol controller. The HDLC Protocol Controller frames and formats data packets according to X.25 (Level 2) Recommendations from the CCITT. The typical applications of MT8952BE include: (...
Mfg:MIT Pack:PLCC D/C:02+ Vendor:Other Category:Other
The MT8952B HDLC Protocol Controller frames and formats data packets according to X.25 (Level 2) Recommendations from the CCITT.
Mfg:INTEL D/C:N/A Vendor:Other Category:Other
The MT8950 is a coder/decoder which uses the Transition Encoded Modulation (TEM) technique for encoding/decoding low speed data to and from a 56/64 kbps channel (equivalent to PCM Voice). The coding and decoding scheme ...
Vendor:Other Category:Other
The MT8941BP is a dual digital phase-locked loop providing the timing and synchronization signals for the T1 or CEPT transmission links and the ST-BUS.The first PLL provides the T1 clock (1.544 MHz) synchronized t...
Vendor:Other Category:Other
The MT8941B is a dual digital phase-locked loop providing the timing and synchronization signals for the T1 or CEPT transmission links and the ST-BUS. The first PLL provides the T1 clock (1.544 MHz) synchronized to...
Vendor:Other Category:Other
The MT8940AE is a kind of dual digital phase-locked loop which provides the timing and synchronization signals for the T1 or CEPT transmission links and the ST-BUS. The first PLL provides the T1 clock (1.544 MHz),synchro...
Vendor:Other Category:Other
The MT8940AC is a kind of dual digital phase-locked loop which provides the timing and synchronization signals for the T1 or CEPT transmission links and the ST-BUS. The first PLL of MT8940AC provides the T1 clock (1.544 ...
Mfg:MITEL Pack:DIP Vendor:Other Category:Other
The MT8940 is a dual digital phase-locked loop providing the timing and synchronization signals for the T1 or CEPT transmission links and the ST-BUS. The first PLL provides the T1 clock (1.544 MHz) synchronized to ...
Vendor:Other Category:Other
The MT8931CE is a kind of Subscriber Network Interface Circuit (SNIC) which implements the ETSI ETS 300-012, CCITT I.430 and ANSI T1.605 Recommendations for the ISDN S and T reference points. The MT8931CE provides point-...
Vendor:Other Category:Other
The MT8931C Subscriber Network Interface Circuit (SNIC) implements the ETSI ETS 300-012, CCITT I.430 and ANSI T1.605 Recommendations for the ISDN S and T reference points. Providing point-topoint and point-to-multipoint ...
Vendor:Other Category:Other
The MT8930C Subscriber Network Interface Circuit (SNIC) implements the ETSI ETS 300-012, CCITT I.430 and ANSI T1.605 Recommendations for the ISDN S and T reference points. Providing point-topoint and point-to-multipoint ...
Mfg:MITEL Pack:N/A Vendor:Other Category:Other
The MT8926 Performance Monitoring Adjunct Circuit (PMAC) interworks with Mitel's MT8976/77 and MH89760B to provide performance monitoring data, alarms and T1 maintenance features.MT8926 meets the performance monitoring a...
Vendor:Other Category:Other
The MT8924AE is a kind of PCM Conference Circuit (PCC). The device is designed to provide conference call capability in digital switching systems. It allows up to 10 independent conferences to be set for up to 32 PCM voi...
Vendor:Other Category:Other
The MT8924 is designed to provide conference call capability in digital switching systems. It allows up to 10 independent conferences to be set for up to 32 PCM voice channels.A/-Law companded data from the PCM input por...
Vendor:Other Category:Other
The MT8920BE is a kind of ST-BUS Parallel Access Circuit (STPA) which provides a simple interface between Mitel's ST-BUS and parallel system environments. The typical applications of MT8920BE include: (1)parallel control...
Vendor:Other Category:Other
The ST-BUS Parallel Access Circuit (STPA) MT8920B provides a simple interface between Mitel's ST-BUS and parallel system environments.
Vendor:Other Category:Other
The MT8910-1 Digital Subscriber Line Interface Circuit (DSLIC) is designed to provide ISDN basic rate access (2B+D) at the U-interface. Full duplex digital transmission at 160 kbit/s on a single twisted pair is achieved ...
Mfg:MITEL Pack:04+ D/C:50 Vendor:Other Category:Other
The MT88V32 is a digitally programmable (TTL levels) 8×4 crosspoint switch that is designed to control wideband analog (video) signal.Each of the 32 nodes of the switching matrix of MT88V32 has a Tswitch, see Fig.1. This...
Mfg:MITEL Pack:DIP Vendor:Other Category:Other
The MT88L89 is a monolithic DTMF transceiver with call progress filter. It is fabricated in CMOS technology offering low power consumption and high reliability.The receiver section of MT88L89 is based upon the industry s...
Vendor:Other Category:Other
The MT88L85 is a monolithic DTMF transceiver with call progress filter. It is fabricated in CMOS technology offering low power consumption and high reliability.The receiver section of MT88L85 is based upon the industry s...
Pack:SOP D/C:09+ Vendor:Other Category:Other
The MT88L70 is a complete 3 Volt, DTMF receiver integrating both the bandsplit filter and digital decoder functions. The filter section uses switched capacitor techniques for high and low group filters; the decoder MT88L...
Vendor:Other Category:Other
The MT88E46 is a CMOS integrated circuit suitable for receiving the FSK and CAS signals in North American (Bellcore) CIDCW, CWD and CID (Calling Identity Delivery) services. MT88E46 provides an optimal solution for the C...
Vendor:Other Category:Other
The MT88E45BNR1 is a low power CMOS integrated circuit suitable for receiving the physical layer signals used in North American (Bellcore) Calling Identity Delivery on Call Waiting (CIDCW) and Calling Identity Delivery (...
Vendor:Other Category:Other
The MT88E45B is a low power CMOS integrated circuit suitable for receiving the physical layer signals used in North American (Bellcore) Calling Identity Delivery on Call Waiting (CIDCW) and Calling Identity Delivery (CID...
Pack:SOP D/C:09+ Vendor:Other Category:Other
The MT88E45B is a low power CMOS integrated circuit suitable for receiving the physical layer signals used in North American (Bellcore) Calling Identity Delivery on Call Waiting (CIDCW) and Calling Identity Delivery (CID...
Vendor:Other Category:Other
The MT88E43B Calling Number Identification Circuit 2 is a low power CMOS integrated circuit intended for receiving physical layer signals transmitted according to BT (British Telecom) SIN227 & SIN242, the U.K.'s CCA ...
Pack:SOP D/C:09+ Vendor:Other Category:Other
The MT88E43 Calling Number Identification Circuit 2 (ECNIC2) is a low power CMOS integrated circuit intended for receiving physical layer signals transmitted according to BT (British Telecom) SIN227 & SIN242, the U.K...
Mfg:MITEL Pack:SOP Vendor:Other Category:Other
The MT88E41 Extended Voltage Calling Number Identification Circuit (ECNIC) is a CMOS integrated circuit providing an interface to various calling line information delivery services that utilize 1200 baud BELL 202 or CCIT...
Mfg:MT Pack:SMD D/C:05+ Vendor:Other Category:Other
The MT88E39 Calling Number Identification Circuit (CNIC1.1) is a CMOS integrated circuit which provides an interface to calling line information delivery services that utilize 1200 baud Bell 202 or CCITT V.23 FSK data tr...
Vendor:Other Category:Other
The MT8889C-1 is a monolithic DTMF transceiver with call progress filter. It is fabricated in CMOS technology offering low power consumption and high reliability.The receiver section of MT8889C-1 is based upon the indust...
Mfg:MITEL Vendor:Other Category:Other
The MT8889C is a monolithic DTMF transceiver with call progress filter. It is fabricated in CMOS technology offering low power consumption and high reliability.The receiver section of MT8889C is based upon the industry s...
Vendor:Other Category:Other
The MT8888C-1 is a monolithic DTMF transceiver with call progress filter. It is fabricated in CMOS technology offering low power consumption and high reliability.The MT8888C utilizes an Intel micro interface, which allow...
Mfg:ZARLINK Vendor:Other Category:Other
The MT8888C is a monolithic DTMF transceiver with call progress filter. It is fabricated in CMOS technology offering low power consumption and high reliability.The MT8888C utilizes an Intel micro interface, which allows ...
Vendor:Other Category:Other
The MT8885 is a monolithic DTMF transceiver with call progress filter. It is fabricated in CMOS technology offering low power consumption and high reliability.The receiver section is based upon the industry standard MT88...
Vendor:Other Category:Other
The MT8880C-1 is a monolithic DTMF transceiver with call progress filter. It is fabricated in Mitel,s ISO2-CMOS technology, which provides low power dissipation and high reliability. The DTMF receiver isbased upon the in...
Vendor:Other Category:Other
The MT8880C/C-1 is a monolithic DTMF transceiver with call progress filter. It is fabricated in Mitel,s ISO2-CMOS technology, which provides low power dissipation and high reliability. The DTMF receiver isbased upon the ...
Vendor:Other Category:Other
The MT8870DS is a type of complete DTMF receiver combining both the bandsplit filter and digital decoder functions. The filter section uses switched capacitor techniques for high and low group filters; the decoder of MT8...
Mfg:MTTEL Pack:ZAR Vendor:Other Category:Other
The MT8870D/MT8870D-1 is a complete DTMF receiver integrating both the bandsplit filter and digital decoder functions. The filter section uses switched capacitor techniques for high and low group filters; the decoder use...
Vendor:Other Category:Other
The MT8870D/MT8870D-1 is a complete DTMF receiver integrating both the bandsplit filter and digital decoder functions. The filter section uses switched capacitor techniques for high and low group filters; the decoder use...
Vendor:Other Category:Other
The MT8870D/MT8870D-1 is a complete DTMF receiver integrating both the bandsplit filter and digital decoder functions. The filter section uses switched capacitor techniques for high and low group filters; the decoder use...
Vendor:Other Category:Other
The MT8870B is a complete DTMF receiver integrating both the bandsplit filter and digital decoder functions, fabricated in Mitel's double poly ISO2-CMOS technology.The fillter section of MT8870B uses switched capacitor t...
Mfg:MITEL Pack:SMD Vendor:Other Category:Other
The MT8843 Calling Number Identification Circuit 2 (CNIC2) is a low power CMOS integrated circuit intended for receiving physical layer signals transmitted according to BT (British Telecom) SIN227 & SIN242, CTA (Cabl...
Vendor:Other Category:Other
The MT8841AS is designed as one kind of calling number identification circuit (CNIC) that can be used in (1)calling number delivery (CND), calling name delivery (CNAM) and calling identity on call waiting (CIDCW) feature...
Mfg:MITEL Pack:SOP16 D/C:97+ Vendor:Other Category:Other
The MT8841 Calling Number Identification Circuit (CNIC) is a CMOS integrated circuit providing an interface to various calling line information delivery services that utilize 1200 baud BELL 202 or CCITT V.23 FSK voiceban...
Mfg:DIP Pack:. D/C:03+ Vendor:Other Category:Other
The MT8840 is a carrier over voice modem which allows simultaneous transfer of voice and data over a single pair of wires. Data is transferred on an amplitude shift keyed (ASK) 32 kHz carrier. On-chip filters remove voic...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The Zarlink MT8816 is fabricated in Zarlink's ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 16 array of crosspoint switches along with a 7 to 128 line decoder and latc...
Vendor:Other Category:Other
The MT8816AE is designed to be fabricated in MITEL's ISOCMOS technology providing low power dissipation and high reliability. The MT8816AE contains a 8 x 16 array of crosspoint switches along with a 7 to 128 line decoder...
Pack:ZARLINK D/C:06+ Vendor:Other Category:Other
The Mitel MT8816 is fabricated in MITEL's ISOCMOS technology providing low power dissipation and high reliability. The MT8816 contains a 8 x 16 array of crosspoint switches along with a 7 to 128 line decoder and latch ci...
Mfg:MT Vendor:Other Category:Other
The Mitel MT8815 is fabricated in MITEL's ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 12 array of crosspoint switches along with a 7 to 96 line decoder and latch cir...
Mfg:METEL D/C:1450
Vendor:Other Category:Other
The Mitel MT8814 is fabricated in MITEL's ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 12 array of crosspoint switches along with a 7 to 96 line decoder and latch cir...
Mfg:ZARLINK Pack:PLCC Vendor:Other Category:Other
The Mitel MT8812 is fabricated in MITEL's ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x12 array of crosspoint switches along with a 7 to 96 line decoder and latch circ...
Mfg:MT Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The Mitel MT8809 is fabricated in MITEL's ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 8 array of crosspoint switches along with a 6 to 64 line decoder and latch circ...
Vendor:Other Category:Other
The Mitel MT8808 is fabricated in MITEL's ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 8 array of crosspoint switches along with a 6 to 64 line decoder and latch circ...
Pack:DIP20 Vendor:Other Category:Other
The Mitel MT8806 is fabricated in MITEL's ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 4 array of crosspoint switches along with a 5 to 32 line decoder and latch circ...
Vendor:Other Category:Other
The MT8804A is a CMOS/LSI 8 x 4 Analog Switch Array incorporating control memory (32 bits), decoder and digital logic level converters. This circuit has digitally controlled analog switches having very low "ON" resistanc...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
The MT8293AE is High Performance Infrared TOP IR LED. It consists of an AlGaAs LED mounted on the lead frame as TOP LED package and is 15mW typical of output power. It emits a spectral band of radiation at 820nm.
The...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
TV tuner module MT7403 for hybrid (analog/digital) terrestrial TV standards
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.