About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index M : MC74ACT241,MC74ACT20,MC7447AVU1000NB,
MC74ACT241
Mfg:ON Pack:SOP20 D/C:06+ Vendor:Other Category:Other
The MC74AC241/74ACT241 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter or receiver which provides improved PC board density.MC74ACT20
Mfg:MOT Pack:SOP/14 Vendor:Other Category:Other
MC74ACT194
Vendor:Other Category:Other
The MC74AC194/74ACT194 is a high-speed 4-bit bidirectional universal shift register. As a high-speed multifunctional, sequential building block, MC74ACT194 is useful in a wide variety of applications. It may be used in s...MC74ACT175
Vendor:Other Category:Other
The MC74AC/ACT175 is a high-speed quad D flip-flop. The device is useful for general flip-flop MC74ACT175 requirements where clock and clear inputs are common. The information on the D inputs is transferred to storage du...MC74ACT174
Mfg:MOT D/C:94 Vendor:Other Category:Other
The MC74AC174/74ACT174 is a high-speed hex D flip-flop. MC74ACT174 is used primarily as a 6-bit edge-triggered storage register. The information on the D inputs is transferred to storage during the LOW-to-HIGH clock tran...MC74ACT163
Mfg:MOT D/C:00 Vendor:Other Category:Other
The MC74AC161/74ACT161 and MC74AC163/74ACT163 are high-speed synchronous modulo-16 binary counters. MC74ACT163 are synchronously presettable for application in programmable dividers and have two types of Count Enable inp...MC74ACT162
Vendor:Other Category:Other
The MC74AC160/74ACT160 and MC74AC162/74ACT162 are high-speed synchronous decade counters operating in the BCD (8421) sequence. They are synchronously presettable for application in programmable dividers and havetwo types...MC74ACT161
Vendor:Other Category:Other
The MC74AC161/74ACT161 and MC74AC163/74ACT163 are high-speed synchronous modulo-16 binary counters. MC74ACT161 are synchronously presettable for application in programmable dividers and have two types of Count Enable inp...MC74ACT160
Vendor:Other Category:Other
The MC74AC160/74ACT160 and MC74AC162/74ACT162 are high-speed synchronous decade counters operating in the BCD (8421) sequence. They are synchronously presettable for application in programmable dividers and havetwo types...MC74ACT158
Vendor:Other Category:Other
The MC74AC158/74ACT158 is a high-speed quad 2-input multiplexer. It selects four bits of data from two sources using the common Select and Enable inputs. The four buffered outputs present the selected data in the inverte...MC74ACT157
Mfg:MOT Pack:00+ D/C:DIP-16 Vendor:Other Category:Other
The MC74AC157/74ACT157 is a high-speed quad 2-input multiplexer. Four bits of data from two sources can be selected using the common Select and Enable inputs. The four outputs present the selected data in the true (nonin...MC74ACT153
Pack:00+ D/C:SOP-16 Vendor:Other Category:Other
The MC74AC153/74ACT153 is a high-speed dual 4-input multiplexer with common select inputs and individual enable inputs for each section. MC74ACT153 can select two lines of data from four sources. The two buffered output...MC74ACT151
Vendor:Other Category:Other
The MC74AC151/74ACT151 is a high-speed 8-input digital multiplexer. MC74ACT151 provides, in one package, the ability to select one line of data from up to eight sources. The MC74AC151/74ACT151 can be used as a universal ...MC74ACT14
Mfg:MOT Pack:SMD Vendor:Other Category:Other
The MC74AC14/74ACT14 contains six logic inverters which accept standard CMOS Input signals (TTL levels for MC74ACT14) and provide standard CMOS output levels. They are capable of transforming slowly changing input signal...MC74ACT139
Mfg:MOTO Pack:SMD Vendor:Other Category:Other
The MC74AC139/74ACT139 is a highspeed, dual 1of4 decoder/demultiplexer. MC74ACT139 has two independent decoders, each accepting two inputs and providing four mutuallyexclusive activeLOW outputs. Each decoder has an activ...MC74ACT138
Mfg:MOT D/C:92 Vendor:Other Category:Other
The MC74AC138/74ACT138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding. The multiple input enables allow parallel expansion to a 1-of...MC74ACT132
Vendor:Other Category:Other
The MC74AC/74ACT132 contains four 2-input NAND gates which are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. In addition, they have greater noise margin than conv...MC74ACT126
Vendor:Other Category:Other
MC74ACT125
Mfg:2323 Pack:ON Vendor:Other Category:Other
MC74ACT113
Vendor:Other Category:Other
The MC74AC113/74ACT113 consists of two high-speed completely independent transition clocked JK flip-flops. The clocking operation is independent of rise and fall times of the clock waveform. The JK design allows operatio...MC74ACT112
Vendor:Other Category:Other
The MC74AC112/74ACT112 consists of two high-speed completely independent transition clocked JK flip-flops. The clocking operation is independent of rise and fall times of the clock waveform. The JK design allows operatio...MC74ACT11
Mfg:MOT Pack:SOP3/14 Vendor:Other Category:Other
MC74ACT109
Vendor:Other Category:Other
The MC74AC109/74ACT109 consists of two high-speed completely independent transition clocked JK flip-flops. The clocking operation is independent of rise and fall times of the clock waveform. The JK design allows operatio...MC74ACT10
Mfg:MOT Pack:SMD Vendor:Other Category:Other
MC74ACT08
Mfg:MOTOROLA Pack:02 D/C:SOP3.9 Vendor:Other Category:Other
MC74ACT05
Mfg:MOTOROLA Pack:99 D/C:TSSOP Vendor:Other Category:Other
The MC74AC/ACT05 is identical in pinout to the LS05. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with TTL outputs.MC74ACT04
Pack:SOP D/C:92/P2 Vendor:Other Category:Other
MC74ACT02
Mfg:MOT Vendor:Other Category:Other
MC74ACT00
Mfg:67 Pack:MOT Vendor:Other Category:Other
MC74AC86
Vendor:Other Category:Other
MC74AC823
Vendor:Other Category:Other
The MC74AC/ACT823 consists of nine D-type edge-triggered flip-flops. MC74AC823 has 3-state outputs for bus systems, organized in a broadside pinning. In addition to the clock and output enabled pins, the buffered clock (...MC74AC810
Vendor:Other Category:Other
MC74AC74
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The MC74AC74/74ACT74 is a dual D-type flip-flop with Asynchronous Clear and Set inputs and complementary (Q,Q) outputs. Information of MC74AC74 at the input is transferred to the outputs on the positive edge of the clock...MC74AC652
Mfg:ON Pack:SOP24 D/C:0615+ Vendor:Other Category:Other
The MC74AC/ACT652 consists of registered bus transceiver circuits, with outputs, D-type flip-flops MC74AC652 and control circuitry providing multiplexed transmission of data directly from the input bus or from the intern...MC74AC646
Mfg:ON Pack:SOP24 D/C:06+ Vendor:Other Category:Other
The MC74AC646/74ACT646 consist of registered bus transceiver circuits, with outputs, Dtype flipflops MC74AC646 and control circuitry providing multiplexed transmission of data directly from the input bus or from the inte...MC74AC643
Vendor:Other Category:Other
The MC74AC643/74ACT643 octal bus transceiver is designed for asynchronous two-way communication between data buses. The device transmits data from bus A to bus B when T/R = HIGH, or from bus B to bus A when T/R = LOW. Th...MC74AC640
Vendor:Other Category:Other
The MC74AC640/74ACT640 octal bus transceiver is designed for asynchronous two-way communication between data buses. The device transmits data from bus A to bus B when T/R = HIGH, or from bus B to bus A when T/R = LOW. Th...MC74AC574
Mfg:ON Pack:SOP20 D/C:06+ Vendor:Other Category:Other
The MC74AC574/74ACT574 is a high-Cspeed, low power octa flip-Cflop with a buffered common Clock (CP) and a buffered commo The information presented to the D inputs is Output Enable (OE). stored in the flip-Cflops o...MC74AC573
Mfg:ON Pack:SOP20 D/C:06+ Vendor:Other Category:Other
The MC74AC573/74ACT574 contains eight D−type latches with 3−state output buffers. When the Latch of MC74AC573 Enable (LE) input is HIGH, data on the Dn inputs enters the latches.In this condition the latches ...MC74AC57
Vendor:Other Category:Other
The MC74AC574/74ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D inputs is stored in the flip-flops on the L...MC74AC564
Vendor:Other Category:Other
The MC74AC564/74ACT564 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D inputs is stored in the flip-flops on the L...MC74AC563
Mfg:MOT D/C:91 Vendor:Other Category:Other
The MC74AC563/74ACT563 is a high-speed octal latch with buffered common Latch Enable (LE) and buffered common Output Enable (OE) inputs.The MC74AC563/74ACT563 device is functionally identical to the MC74AC573/ 74ACT573, ...MC74AC541
Mfg:MOTOROLA Pack:SOP-20 D/C:1997 Vendor:Other Category:Other
The MC74AC540/74ACT540 and MC74AC541/74ACT541 are octal buffer/line drivers designed to be employed as memory and address drivers, clock drivers and bus oriented transmitter/receivers. That is a noninverting option of th...MC74AC540
Mfg:MOTOROLA Pack:5.2mm 20 D/C:04+ Vendor:Other Category:Other
The MC74AC540/74ACT540 and MC74AC541/74ACT541 are octal buffer/line drivers designed to be employed as memory and address drivers, clock drivers and bus oriented transmitter/receivers. The MC74AC541/74ACT541 is a noninve...MC74AC534
Mfg:MOT D/C:91 Vendor:Other Category:Other
The MC74AC534/74ACT534 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus oriented applications. A buffered Clock (CP) and Output Enable (OE)...MC74AC533
Vendor:Other Category:Other
The MC74AC533/74ACT533 consists of eight latches with 3-state outputs for bus organized system applications. The flip-flops MC74AC533 appear transparent to the data when Latch Enable (LE) is HIGH. When LE is LOW, the da...MC74AC521
Vendor:Other Category:Other
The MC74AC521/74ACT521 is an expandable 8-bit comparator. It compares two words of up to eight bits each and provides a LOW output when the two words match bit for bit. The expansion input IA=B also serves as an active ...MC74AC4040
Vendor:Other Category:Other
The MC74AC4040 consists of 12 master-slave flip-flops and whose output feeds the next individually and the frequency at each output is half that of the preceding one. Reset is asynchronous and active-high. State changes ...MC74AC4020
Vendor:Other Category:Other
The MC74AC4020 consists of 14 master-slave flip-flops with 12 stages brought out to pins. The output of each flip-flop feeds the next and the frequency at each output is half that of the preceding one. The state of the c...MC74AC378
Vendor:Other Category:Other
The MC74AC378/74ACT378 is a 6-bit register with a buffered common Enable. This device is similar to the MC74AC174/74ACT174, but with common Enable rather than common Master Reset.MC74AC377
Vendor:Other Category:Other
The MC74AC377/74ACT377 has eight edge-triggered, D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) input loads all flip-flops simultaneously, when the Clock Enable (CE) is LOW.The r...MC74AC374
Mfg:SMD Pack:MOTO D/C:2004+ Vendor:Other Category:Other
The MC74AC374/74ACT374 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for busoriented applications. A buffered Clock (CP) and Output Enable (OE) ...MC74AC373
Mfg:MOTOROLA Pack:SOP-20 D/C:1994 Vendor:Other Category:Other
The MC74AC373/74ACT373 consists of eight latches with 3-state outputs for bus organized system applications. The flip-flops MC74AC373 appear transparent to the data when Latch Enable (LE) is HIGH. When LE is LOW, the da...MC74AC353
Vendor:Other Category:Other
The MC74AC353/74ACT353 is a dual 4-input multiplexer with 3-state outputs. MC74AC353 can select two bits of data from four sources using common Select inputs. The outputs may be individually switched to a high impedance ...MC74AC352
Vendor:Other Category:Other
The MC74AC352/74ACT352 is a very high-speed dual 4-input multiplexer with common Select inputs and individual Enable inputs for each section. It can select two bits of data from four sources. The two buffered outputs pre...MC74AC350
Vendor:Other Category:Other
The MC74AC350/74ACT350 is a specialized multiplexer that accepts a 4-bit word and shifts MC74AC350 0, 1, 2 or 3 places, as determined by two Select (S0, S1) inputs. For expansion to longer words, three linking inputs are...MC74AC32MC74ACT32
Vendor:Other Category:Other
MC74AC323
Vendor:Other Category:Other
The MC74AC323/74ACT323 is an 8-bit universal shift/storage register with 3-state outputs. Its function is similar to the MC74AC299/74ACT299 with the exception of Synchronous Reset. Parallel load inputs and flip-flop outp...MC74AC299
Vendor:Other Category:Other
The MC74AC299/74ACT299 is an 8-bit universal shift/storage register with 3-state outputs. Four modes of operation are possible: hold (store), shift left, shift right and load data. The parallel load inputs of MC74AC299 a...MC74AC273
Pack:SOP D/C:95/P2 Vendor:Other Category:Other
MC74AC259
Vendor:Other Category:Other
The MC74AC259/74ACT259 is a high-speed 8-bit addressable latch designed for general purpose storage applications in digital systems. MC74AC259 is a multifunctional device capable of storing single line data in eight addr...MC74AC258
Vendor:Other Category:Other
The MC74AC258/74ACT258 is a quad 2-input multiplexer with 3-state outputs. Four bits of data from two sources can be selected using a common data select input. The four outputs of MC74AC258 present the selected data in t...MC74AC257
Vendor:Other Category:Other
The MC74AC257/74ACT257 is a quad 2-input multiplexer with 3-state outputs. Four bits of data from two sources can be selected using a Common Data Select input. The four outputs of MC74AC257 present the selected data in t...MC74AC256
Vendor:Other Category:Other
The MC74AC256/74ACT256 dual addressable latch has four distinct modes of operation which are selectable by controlling the Clear and Enable inputs (see Function Table). In the addressable latch mode, data at the Data (D)...MC74AC253
Mfg:MOT Pack:N/A Vendor:Other Category:Other
The MC74AC253/74ACT253 is a dual 4-input multiplexer with 3-state outputs. MC74AC253 can select two bits of data from four sources using common select inputs. The outputs may be individually switched to a high impedance ...MC74AC251
Vendor:Other Category:Other
MC74AC245
Mfg:ON Pack:SOP7.2mm-20L D/C:0035+ Vendor:Other Category:Other
The MC74AC245/74ACT245 contains eight noninverting bidirectional buffers with 3state outputs and is intended for busoriented applications. Current sinking capability is 24 mA at both the A and B ports. The Transmit/Recei...MC74AC244
Mfg:MOT Pack:SOP/20 Vendor:Other Category:Other
The MC74AC244/74ACT244 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter/ receiver which provides improved PC board density.MC74AC241
Mfg:MOTOROLA Pack:5.2mm 20 D/C:04+ Vendor:Other Category:Other
The MC74AC241/74ACT241 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter or receiver which provides improved PC board density.MC74AC20
Vendor:Other Category:Other
MC74AC194
Mfg:MOT D/C:90 Vendor:Other Category:Other
The MC74AC194/74ACT194 is a high-speed 4-bit bidirectional universal shift register. As a high-speed multifunctional, sequential building block, MC74AC194 is useful in a wide variety of applications. MC74AC194 may be use...MC74AC190
Vendor:Other Category:Other
The MC74AC190 is a reversible BCD (8421) decade counter which features synchronous counting and asynchronous presetting. The preset feature allows the MC74AC190 to be used in programmable dividers. The Count Enable input...MC74AC175
Vendor:Other Category:Other
The MC74AC/ACT175 is a high-speed quad D flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information on the D inputs is transferred to storage during the LO...MC74AC174
Mfg:SMD Pack:MOTO D/C:2004+ Vendor:Other Category:Other
The MC74AC174/74ACT174 is a high-speed hex D flip-flop. The device is used primarily as a 6-bit edge-triggered storage register. The information on the D inputs is transferred to storage during the LOW-to-HIGH clock tran...MC74AC163
Mfg:MOT Pack:SMD D/C:00+ Vendor:Other Category:Other
The MC74AC161/74ACT161 and MC74AC163/74ACT163 are high-speed synchronous modulo-16 binary counters. MC74AC163 are synchronously presettable for application in programmable dividers and have two types of Count Enable inpu...MC74AC162
Vendor:Other Category:Other
The MC74AC160/74ACT160 and MC74AC162/74ACT162 are high-speed synchronous decade counters operating in the BCD (8421) sequence. They are synchronously presettable for application in programmable dividers and havetwo types...MC74AC161
Mfg:ON Vendor:Other Category:Other
The MC74AC161/74ACT161 and MC74AC163/74ACT163 are high-speed synchronous modulo-16 binary counters. They are synchronously presettable for application in programmable dividers and have two types of Count Enable inputs pl...MC74AC160
Vendor:Other Category:Other
The MC74AC160/74ACT160 and MC74AC162/74ACT162 are high-speed synchronous decade counters operating in the BCD (8421) sequence. They are synchronously presettable for application in programmable dividers and havetwo types...MC74AC158
Vendor:Other Category:Other
The MC74AC158/74ACT158 is a high-speed quad 2-input multiplexer. It selects four bits of data from two sources using the common Select and Enable inputs. The four buffered outputs present the selected data in the inverte...MC74AC157
Mfg:MOTOROLA Pack:n/a D/C:99+ Vendor:Other Category:Other
The MC74AC157/74ACT157 is a high-speed quad 2-input multiplexer. Four bits of data from two sources can be selected using the common Select and Enable inputs. The four outputs present the selected data in the true (nonin...MC74AC153
Vendor:Other Category:Other
The MC74AC153/74ACT153 is a high-speed dual 4-input multiplexer with common select inputs and individual enable inputs for each section. It can select two lines of data from four sources. The two buffered outputs present...MC74AC151
Vendor:Other Category:Other
The MC74AC151/74ACT151 is a high-speed 8-input digital multiplexer. It provides, in one package, the ability to select one line of data from up to eight sources. The MC74AC151/74ACT151 can be used as a universal function...MC74AC14
Mfg:MOTOROLA Pack:QFP D/C:97+ Vendor:Other Category:Other
The MC74AC14/74ACT14 contains six logic inverters which accept standard CMOS Input signals (TTL levels for MC74ACT14) and provide standard CMOS output levels. They are capable of transforming slowly changing input signal...MC74AC139
Vendor:Other Category:Other
The MC74AC139/74ACT139 is a highspeed, dual 1of4 decoder/demultiplexer. The device has two independent decoders, each accepting two inputs and providing four mutuallyexclusive activeLOW outputs. Each decoder has an activ...MC74AC138
Mfg:MOT D/C:9802 Vendor:Other Category:Other
The MC74AC138/74ACT138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding. The multiple input enables allow parallel expansion to a 1-of...MC74AC132
Vendor:Other Category:Other
The MC74AC/74ACT132 contains four 2-input NAND gates which are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. In addition, they have greater noise margin than conv...MC74AC126
Vendor:Other Category:Other
MC74AC125
Mfg:ON Pack:SOP14 D/C:08+ Vendor:Other Category:Other
MC74AC113
Vendor:Other Category:Other
The MC74AC113/74ACT113 consists of two high-speed completely independent transition clocked JK flip-flops. The clocking operation is independent of rise and fall times of the clock waveform. The JK design allows operatio...MC74AC112
Vendor:Other Category:Other
The MC74AC112/74ACT112 consists of two high-speed completely independent transition clocked JK flip-flops. The clocking operation is independent of rise and fall times of the clock waveform. The JK design of MC74AC112 al...MC74AC11
Mfg:MOTO Vendor:Other Category:Other
MC74AC109
Vendor:Other Category:Other
The MC74AC109/74ACT109 consists of two high-speed completely independent transition clocked JK flip-flops. The clocking operation is independent of rise and fall times of the clock waveform. The JK MC74AC109 design allow...MC74AC10
Mfg:MOT D/C:95 Vendor:Other Category:Other
MC74AC08
Mfg:MOTO Vendor:Other Category:Other
MC74AC05
Mfg:ON Pack:SOP14 D/C:08+ Vendor:Other Category:Other
The MC74AC/ACT05 is identical in pinout to the LS05. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with TTL outputs.MC74AC04
Mfg:MOTO Pack:SMD Vendor:Other Category:Other
MC74AC02
Mfg:MOT Pack:SOP14 D/C:01+ Vendor:Other Category:Other
MC74AC00
Mfg:MOT Pack:SOP/14 Vendor:Other Category:Other
MC7447RX1000
Vendor:Other Category:Other
MC7447RX1000 describes part-number-specific changes to recommended operating conditions and revised electrical specifications, as applicable, from those described in the general MPC7457 RISC Microprocessor Hardware Speci...MC7447AVU1000NB
Vendor:Freescale Semiconductor Category:Integrated Circuits (ICs)
IC MPU RISC 32BIT 360-BGAThe MC7447AVU1000NB is one member of the MC7447A family which is designed as the PowerPC microprocessor. Features of this device is power manage-ment:1.1-V processor core. And the general parameters is core power supply:...