© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:Supertex Pack:SOP D/C:2004 Vendor:Other Category:Other
The Supertex HV831 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.0V. The device is designed to reduce the amount of...
Mfg:SUPERTEX Pack:SOP8 Vendor:Other Category:Other
The Supertex HV830 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0...
Vendor:Other Category:Other
The Supertex HV829A/HV829B are high voltage EL lamp driver integrated circuits designed for driving EL lamps of up to 70nF at 1000Hz. The input supply voltage range is from 2.7V to 5.5V. These devices HV829B use a single...
Vendor:Other Category:Other
The Supertex HV829A/B are high voltage EL lamp driver integrated circuits designed for driving EL lamps of up to 70nF at 1000Hz. The input supply voltage range is from 2.7V to 5.5V. These devices use a single inductor, a...
Pack:SMD-8 Vendor:Other Category:Other
The Supertex HV826 is a high voltage driver designed for driving EL lamps. The input supply voltage range is from 1.8V to 3.5V. The device uses a single inductor and a minimum number of passive components. The nominal re...
Pack:SOP Vendor:Other Category:Other
The Supertex HV825 is a high voltage driver designed for driving EL lamps typically up to 6nF. The input supply voltage range is from 1.0V to 1.6V. The device uses a single inductor and a minimum number of passive compon...
Mfg:SUPERTEX Pack:SMD Vendor:Other Category:Other
The Supertex HV824 is a high voltage driver designed to drive EL lamps with capacitive loads of 2nF to 15nF. The input supply voltage range is 1.0V to1.6V. The device uses a single inductor and a minimum number of passiv...
Mfg:SUPERTEXINC Pack:SSOP8 Vendor:Other Category:Other
The Supertex HV823 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0...
Mfg:SUPERTEX Pack:SOP-8 D/C:06+ Vendor:Other Category:Other
The Supertex HV809LG-G is an off-line, high voltage, EL lamp driver integrated circuit designed for driving EL lamps of up to 350nF at 400Hz. The input supply voltage can be a rectifi ed nominal 120V AC source or any oth...
Mfg:SUPERTEX Pack:3.9mm Vendor:Other Category:Other
The Supertex HV809 is an off-line high voltage EL lamp driver integrated circuit designed for driving EL lamps of up to 350nF at 400Hz. The input supply voltage can be a rectified nominal 120V AC source or any other DC s...
Mfg:SUPERTEX Pack:SOP8 Vendor:Other Category:Other
The Supertex HV8051 and HV8053 are high-voltage drivers designed for driving EL lamps of typically 4nF and 12nF for a 1V and 3V operation. The input supply voltage range is from 1.0V to 1.6V for HV8051 and 2.4V to 3.5V f...
Vendor:Other Category:Other
The Supertex HV8051 and HV8053 are high-voltage drivers designed for driving EL lamps of typically 4nF and 12nF for a 1V and 3V operation. The input supply voltage range is from 1.0V to 1.6V for HV8051 and 2.4V to 3.5V f...
Mfg:SUPERT Pack:SMD Vendor:Other Category:Other
The Supertex HV803 is a high-voltage driver designed for driving EL lamps of up to 30nF. EL lamps greater than 30nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.4...
Vendor:Other Category:Other
The HV7802 high side current monitor IC contains a transconductance amplifi er which translates a high side current measurement voltage into an output current with resistor programmable transconductance gain. An op...
Vendor:Other Category:Other
The HV7801 high side current monitor IC transfers a highside current measurement voltage to its ground referenced output with an accurate voltage gain of fi ve. The measurement voltage typically originates at a current s...
Vendor:Other Category:Other
The HV7800 is a high side current monitor IC, which senses the voltage across an external current sense resistor located in the power or "high" side of the circuit and translates this voltage to a ground referenced circu...
Vendor:Other Category:Other
The HV78 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. This device has been designed for use as a driver for electroluminescent displays. It can also be used in any application requir...
Vendor:Other Category:Other
The HV77, HV577, and HV79 are low-voltage serial to high-voltage parallel converters with push-pull outputs. This device has been designed for use as a driver for electroluminescent displays. It can also be used in any a...
Vendor:Other Category:Other
The HV7620 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. This device has been designed for use as a driver for color AC plasma displays.The device HV7620 has 4 parallel 8-bit shift re...
Vendor:Other Category:Other
This is the introduction HV758DB1: The HV758 is a monolithic 4-channel, high-speed, high voltage, ultrasound transmitter pulser. This integrated, high performance circuit is in a single, 8x8mm, 64-Ball FCBGA packag...
Mfg:SUPEREX D/C:2007 Vendor:Other Category:Other
The Supertex HV758 is a four-channel, monolithic high voltage, high-speed pulse generator. It is designed for medical ultrasound applications. This high voltage and high-speed integrated circuit can also be used for othe...
Vendor:Other Category:Other
The Supertex HV748 is a four-channel, monolithic, high voltage, high speed pulse generator. It is designed for portable medical ultrasound applications. This high voltage and high speed integrated circuit can also be use...
Vendor:Other Category:Other
The Supertex HV746 is a dual-channel monolithic high voltage high-speed pulse generator. It is designed for portable medical ultrasound applications. This high voltage and high-speed integrated circuit can also be used f...
Vendor:Other Category:Other
The HV739DB1 is a monolithic single channel, high-speed, high voltage, ultrasound transmitter pulser. This integrated, high performance circuit is in a single, 5x5mm, 32-lead QFN package.The HV739DB1 can deliver up to a ...
Vendor:Other Category:Other
The Supertex HV739 is a single channel monolithic 200V 3.0A high-speed pulser. It is designed for NDT and medical ultrasound applications. This high voltage and high-current integrated circuit can also be used for other ...
Vendor:Other Category:Other
Vendor:Other Category:Other
The Supertex HV738 is a four-channel, monolithic, high voltage, high speed pulse generator. It is designed for portable medical ultrasound applications. This high voltage and high speed integrated circuit can also be use...
Vendor:Other Category:Other
The Supertex HV7370 is a four-channel, monolithic high voltage, high-speed damper. It is designed for working with the HV738, HV748 or HV758 for medical ultrasound waveform generators requiring fast return-to-zero applic...
Vendor:Other Category:Other
The HV732DB1 is a complete, high-speed, high voltage, ultrasound transmitter pulser. This integrated high performance circuit is in a single 7x7x0.9mm 44-lead, multi-die, QFN package.The HV732DB1 can deliver up to ±2A so...
Vendor:Other Category:Other
The Supertex HV732 is a single, complete, high-voltage, high-speed, ultrasound transmitter pulser. It is designed for medical ultrasound imaging applications. The HV732 has built-in damping for faster RTZ waveform capabi...
Vendor:Other Category:Other
Vendor:Other Category:Other
The HV7224 is a low-voltage serial to high-voltage parallel converters with push-pull outputs. It is especially suitable for use as a symmetric row driver in AC thin-film electroluminescent (ACTFEL) displays.When the dat...
Vendor:Other Category:Other
The HV72 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. It is especially suitable for use as a symmetric row driver in Ac thin-film electroluminescent (ACTFEL) displays. The HV72 offer...
Vendor:Other Category:Other
1.3Mega pixel CIS HV7161SPA2 is a highly integrated single chip CMOS color image sensor implemented by proprietary MagnaChip 0.18um CMOS sensor process realizing high sensitivity and wide dynamic range. Total active pixe...
Vendor:Other Category:Other
HV7151SP is a highly integrated single chip CMOS color image sensor implemented by proprietary Hynix 0.18um CMOS sensor process realizing high sensitivity and wide dynamic range. Active pixel array is 1164x886. Each acti...
Mfg:SUPERTEX Pack:N/A D/C:05+ Vendor:Other Category:Other
HV7131RP is a highly integrated single chip CMOS color image sensor implemented by proprietary MagnaChip 0.30um CMOS sensor process realizing high sensitivity and wide dynamic range. Total Pixel Array are 660x507 pixels....
Vendor:Other Category:Other
HV7131R is a highly integrated single chip CMOS color image sensor implemented by proprietary MagnaChip 0.30um CMOS sensor process realizing high sensitivity and wide dynamic range. Total pixel array size is 656x502, and...
Mfg:HY Pack:CLCC D/C:05+ Vendor:Other Category:Other
HV7131GP is a highly integrated single chip CMOS color image sensor implemented by proprietary MagnaChip 0.35um CMOS sensor process realizing high sensitivity and wide dynamic range. Total pixel array size is 652x492, an...
Vendor:Other Category:Other
HV7131B is a highly integrated single chip CMOS color image sensor using Hyundai 0.5um CMOS process developed for image application to realize high efficiency R/G/B photo sensor. The sensor has 648X488 pixel array, and i...
Vendor:Other Category:Other
HV7121B is a highly integrated single chip CMOS color image sensor using Hyundai 0.5um CMOS process developed for image application to realize high efficiency R/G/B photo sensor. The sensor has 414X314 pixels total, and ...
Vendor:Other Category:Other
The HV7100 is an integrated PWM speed controller for driving 24V and 48V DC Fans. The features and benefi ts provided by make driving fans simple and low cost. It drives a high side external P-channel FET, allowing the u...
Vendor:Other Category:Other
The HV7022-C is a low-voltage serial to high-voltage parallel converter with push-pull outputs. It is especially suited for use as a symmetric row driver in AC thin-film electroluminescent (ACTFEL) displays. The HV70 off...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Pack:PLCC Vendor:Other Category:Other
The HV6810PJ is a monolithic integrated circuit designed to drive a dot matrix or segmented vacuum fl uorescent display (VFD). These devices feature a serial data output to cascade additional devices for large displays.A...
Mfg:SUPEPTEP Pack:DIP Vendor:Other Category:Other
The HV6810 is a monolithic integrated circuit designed to drive a dot matrix or segmented vacuum fluorescent display (VFD). These devices feature a serial data output to cascade additional devices for large displays.A 10...
Vendor:Other Category:Other
The HV66 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. This device has been designed for use as a driver circuit for LCD displays. It can also be used in any application requiring mul...
Vendor:Other Category:Other
The HV6506 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. This device has been designed for use as a driver circuit for LCD displays. It can also be used in any application requiring m...
Vendor:Other Category:Other
The HV633 is a 32-channel driver IC for gray shade display use. It is designed to produce varying output voltages between 3 and80 volts. This amplitude modulation at the output is facilitated by n external ramp voltage ...
Vendor:Other Category:Other
The HV632 is a 32-channel gray-shade column driver IC designed for driving electrofluorescent displays. Using Supertex's unique HVCMOS® technology, it is capable of 256 levels of gray shading by PWM conversion.Input ...
Vendor:Other Category:Other
The HV623 is a 32-channel driver IC for gray shade display use. It is designed to produce varying output voltages between 3 and 80 volts. This amplitude modulation at the output is facilitated by an external ramp voltage...
Vendor:Other Category:Other
The HV62208 is a 32-channel gray-shade column driver IC designed for driving electrofluorescent displays. Using Supertex's unique HVCMOS® technology, it is capable of 256 levels of gray shading by PWM conversion.The ...
Vendor:Other Category:Other
The HV62106 is a 64-channel column driver IC designed for gray shade flat panel displays. Using Supertex's unique HVCMOS® technology, it is capable of providing gray shading by pulse width modulation (PWM) conversion...
Vendor:Other Category:Other
The HV610 is a 32-channel high voltage, medium current driver IC. The outputs can be either at VPPS, VNN, HiZ, or HVGND.Data is shifted through four parallel 8-bit shift registers on the low to high transition of the clo...
Vendor:Other Category:Other
The HV61 is a 64-channel latched serial-to-parallel converter with bidirectional shifting capability and high-voltage outputs that can be switched in polarity from VPP to VNN. It is intended mainly as a driver for active...
Vendor:Other Category:Other
The HV6008 is a 32-channel liquid crystal display driver with 3-state DMOS outputs. Each output can be set to +40V, -40V, or GND. A symmetric waveform can be applied to a capacitive load using the phase shift feature of ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The Supertex HV583 is a 128 channel low voltage serial to high voltage parallel converter with push-pull outputs. This device has been designed for use as a display driver. It can also be used in any application requirin...
Vendor:Other Category:Other
The HV582 is a low voltage to high voltage converter with 96 high voltage push-pull outputs. This device has been designed to operate as a data driver for AC plasma display panels.The device HV582 is loaded at up to 30MH...
Mfg:HV Pack:PLCC Vendor:Other Category:Other
The Supertex HV5812 is a 20-channel serial input vacuum fluorescent display driver. It combines a 20-bit CMOS shift register, data latches, and control circuitry with high voltage MOSFET outputs. It is primarily designed...
Vendor:Other Category:Other
The HV57908 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. This device has been designed for use as a driver for electroluminescent displays. It can also be used in any application req...
Vendor:Other Category:Other
The HV57708PG is designed as one kind of 32 MHz, 64-channel serial to parallel converter with push-pull outputs which has been designed for use as a driver for electroluminescent displays.Also there are 64 latches and co...
Vendor:Other Category:Other
Vendor:Other Category:Other
The HV574 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. This device has been designed for use as a driver for printer applications. It can also be used in any application requiring mu...
Vendor:Other Category:Other
The HV57009 is a low-voltage serial to high-voltage parallel converter with P-channel open drain outputs. This device has been designed for use as a driver for plasma panels.The device HV57009 has two parallel 32-bit shi...
Vendor:Other Category:Other
The HV570 is a low-voltage serial to high-voltage parallel converter with P-channel open drain outputs. This device has been designed for use as a driver for plasma panels. The device has two parallel 32-bit shift regist...
Vendor:Other Category:Other
The HV57 and HV58 are low-voltage serial to high-voltage parallel converters with push-pull outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any ap...
Vendor:Other Category:Other
The HV55 and HV5630 are low-voltage serial to high-voltage parallel converters with open drain outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any...
Vendor:Other Category:Other
The HV55 and HV5622 are low-voltage serial to high-voltage parallel converters with open drain outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any...
Vendor:Other Category:Other
The HV5530 and HV56 are low-voltage serial to high-voltage parallel converters with open drain outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any...
Vendor:Other Category:Other
The HV5522 and HV56 are low-voltage serial to high-voltage parallel converters with open drain outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any...
Vendor:Other Category:Other
The HV53 and HV5408 are low voltage serial to high voltage parallel converters with push-pull outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any ...
Mfg:N/A Pack:PLCC Vendor:Other Category:Other
The HV5308 and HV54 are low voltage serial to high voltage parallel converters with push-pull outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any ...
Mfg:Supertex Pack:QFP-44 D/C:4 Vendor:Other Category:Other
The HV51 and HV5222 are low voltage serial to high voltage parallel converters with open drain outputs. These devices have been designed for use as drivers for AC electroluminescent displays. They can also be used in any...
Vendor:Other Category:Other
The HV518 is designed for vacuum fluorescent or DC plasma applications, where it can serve as a segment, digit or matrix display driver. Each device has 32 outputs, 32 latches and a 32 bit cascadable shift register. Seri...
Vendor:Other Category:Other
The HV513WG and the HV514WG are low voltage serial to high voltage (HV) 8-channel parallel converter integrated circuits (ICs). They are both configured with one low voltage serial input to 8 parallel high voltage output...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The HV513WG and the HV514WG are low voltage serial to high voltage (HV) 8-channel parallel converter integrated circuits (ICs). They are both configured with one low voltage serial input to 8 parallel high voltage output...
Vendor:Other Category:Other
The HV513 is a low voltage serial to high voltage parallel converter with 8 high voltage push-pull outputs. This device has been designed to drive small capacitve loads such as piezoelectric transducers. It can also be u...
Vendor:Other Category:Other
The HV5122 and HV52 are low voltage serial to high voltage parallel converters with open drain outputs. These devices have been designed for use as drivers for AC electroluminescent displays. They can also be used in any...
Vendor:Other Category:Other
The HV510 is a low voltage serial to high voltage parallel converter with 12 high voltage push-pull outputs. This device has been designed to drive small capacitive loads such as piezo electric transducers. It can also b...
Vendor:Other Category:Other
The HV51 and HV52 are low voltage serial to high voltage parallel converters with P-Channel open drain outputs. These devices have been designed for use as drivers for AC electroluminescent displays. They can also be use...
Vendor:Other Category:Other
The HV509 is a 200V, 16-channel serial to parallel converter. The high voltage outputs and the backplane driver are design d to source and sink ±1.0mA. The high voltage outputs of HV509 are controlled by a 16-bit serial ...
Mfg:SUPEPTEP Pack:SOP Vendor:Other Category:Other
The Supertex HV508 is a 45V liquid crystal shutter driver in an SO- 8 surface mount package. It consist of two outputs that provide square waves of opposite phase. The liquid crystal shutter is connected between the two ...
Mfg:SUPERTEX Pack:PQFP D/C:08+ Vendor:Other Category:Other
The HV507 is a low voltage serial to high voltage parallel converter with 64 high voltage push-pull outputs. This device has been designed for use as a printer driver for electrostatic applications. It can also be used i...
Vendor:Other Category:Other
The HV506DG/HV506PG/HV506X belong to HV506 family, which is a low-voltage serial to high-voltage parallel converter with push-pull outputs. It is especially suitable for use as a symmetric row driver in AC thin-film elec...
Vendor:Other Category:Other
The HV506 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. It is especially suitable for use as a symmetric row driver in AC thin-film electroluminescent (ACTFEL) displays.There are some...
Vendor:Other Category:Other
The HV501 is a 32-channel low-voltage serial to high-voltage parallel converter designed for use in matrix-addressable display applications. It is manufactured with the HVCMOS technology for enhanced ruggedness and perfo...
Vendor:Other Category:Other
The capacitors HV500V consist of a ceramic disc both sides of which are silver-plated. Connection leads are made of tinned copper having a diameter of 0.6 mm.The capacitors HV500V have inward kinked leads with a spacing ...
Vendor:Other Category:Other
Vendor:Other Category:Other
The HV500 is a monolithic low-voltage logic to high-voltage output 32-chan nel driver for AC plasma flat panel displays. It is manufactured using the HVCMOS process, providing the high output voltages and currents possib...
Vendor:Other Category:Other
Not recommended for new designs.The HV4937 is a low voltage serial to high voltage parallel converter with open drain outputs. It has been designed especially for use as a driver for electrostatic printers.This device HV...
Vendor:Other Category:Other
The HV4630 and HV46 are low-voltage serial to high-voltage parallel converters with P-Channel open drain outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be u...
Vendor:Other Category:Other
The HV461FG is a highly integrated Ring Generator controller IC designed to work with a patented four-quadrant inverter topology, with Synchronous Rectifiers on the secondary side to achieve higher efficiencies. The inve...
Mfg:HV Pack:PLCC44 D/C:07/08+ Vendor:Other Category:Other
The HV4530 and HV46 are low-voltage serial to high-voltage parallel converters with P-Channel open drain outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be u...
Vendor:Other Category:Other
The Supertex HV450 is a PWM high voltage ring generator. The high voltage output P- and N-channel transistors are controlled independently by the logic inputs PIN and NIN. For application where a single control pin (NIN)...
Vendor:Other Category:Other
The Supertex HV441 is a monolithic integrated circuit capable of generating up to a 70V RMS sine wave output at frequencies of 15Hz to 60Hz with a load of 5 North American RENs. Its output rating can be enhanced to 20 No...
Vendor:Other Category:Other
The Supertex HV440 is a monolithic integrated circuit capable of generating up to a 70V RMS sine wave output at frequencies of 15Hz to 60Hz with a load of 5 North American RENs. Its output rating can be enhanced to 20 No...
Vendor:Other Category:Other
The Supertex HV430 is a high voltage PWM ring generator integrated circuit. The high voltage outputs, VPGATE and VNGATE, are used to drive the gates of external high voltage P-channel and N-channel MOSFETs in a push-pull...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.