© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The Supertex HV421 is a high voltage ring generator designed to drive 1 North American REN (ringer equivalent number) from a 5V source. It has an internal DC-DC converter which converts the 5V DC supply to a nominal 68V ...
Vendor:Other Category:Other
The HV41 and HV42 are low voltage serial to high voltage parallel converters with P-Channel open drain outputs. These devices have been designed for use as drivers for AC electroluminescent displays. They can also be use...
Vendor:Other Category:Other
The HV400MJ_883 is a single monolithic, non-inverting high current driver designed to drive large capacitive loads at high slew rates. The device is optimized for driving single or parallel connected N-Channel power MOSF...
Vendor:Other Category:Other
The HV3922 is a monolithic high-voltage quad-output driver that is designed to be used in conjunction with the Supertex VN2222NC*, a separate N-channel DMOS FET quad array, whose device characterics are briefly described...
Vendor:Other Category:Other
The HV38 is a 32-channel column driver IC designed for gray-shade display use. A bidirectional shift register working on both clock edges is used to index input data, in groups of 4, into a set of data latches. These are...
Vendor:Other Category:Other
Vendor:Other Category:Other
(Not recommended for new designs. Please use HV507 with improved performance.) The HV3527 is a low voltage serial to high voltage parallel converter with push-pull outputs. This device has been designed for use as a prin...
Vendor:Other Category:Other
The HV3418 is a low voltage serial to high voltage parallel converter with push-pull outputs. This device has been designed for use as a printer driver for inkjet applications. It can also be used in any application requ...
Vendor:Other Category:Other
These CMOS/DMOS high voltage analog switches HV341 are designed to handle high voltage analog signals. They may be used when analog voltages are low and high voltage immunity is desired. The signal handling capability ex...
Vendor:Other Category:Other
The HV33 is dual serial-to-parallel converter chip originally designed tor driving printheads. Its dual converters have independent clock inputs and output blanking logic permitiing considerable flexibility in driving sm...
Mfg:HAR Pack:DIP Vendor:Other Category:Other
The HV3-2405E-5 is a single chip off line power supply that converts world wide AC line voltages to a regulated DC voltage. The output voltage is adjustable from 5VDC to 24VDC with an output current of up to 50mA. The HV...
Mfg:HI Pack:SOP D/C:03+ Vendor:Other Category:Other
The Supertex HV320 re-settable electronic circuit breaker is designed to provide fast, consistent and accurate current limiting and load isolation during fault conditions. It may be used in a variety of applications in s...
Vendor:Other Category:Other
The HV3137 is a low voltage serial to high voltage parallel converter with open drain outputs. It has been designed especially for use as a driver for electrostatic printers. This device HV3137 consists of a 64-bit shift...
Vendor:Other Category:Other
The Supertex HV312DB1 demo board contains all circuitry necessary to demonstrate the features of the HV312 hotswap controller. Intended primarily as a negative hotswap controller, the HV312 controls the negative supply p...
Vendor:Other Category:Other
The HV302 and HV312 Hotswap Controllers perform current limiting, circuit breaker protection, over and under voltage detection power management functions during insertion of cards or modules into live backplanes and conn...
Mfg:HI Pack:SOP-8 D/C:92+ Vendor:Other Category:Other
The Supertex HV301 and HV311 Hotswap Controllers provide control of power supply connection during insertion of cards or modules into live backplanes. They may be used in systems where active control is implemented in th...
Mfg:HI Pack:SOP D/C:06+ Vendor:Other Category:Other
The Supertex HV300 (and HV310), Hotswap Controller, Negative Supply control power supply connection during insertion of cards or modules into live backplanes. They may be used in traditional 'negative 48V' powered system...
Vendor:Other Category:Other
The Supertex HV302DB1 demo board contains all circuitry necessary to demonstrate the features of the HV302 hotswap controller. Intended primarily as a negative hotswap controller, the HV302 controls the negative supply p...
Vendor:Other Category:Other
The HV302 and HV312 Hotswap Controllers perform current limiting, circuit breaker protection, over and under voltage detection power management functions during insertion of cards or modules into live backplanes and conn...
Vendor:Other Category:Other
The HV301LG is designed as hot swap controller which provide control of power supply connection during insertion of cards or modules into live backplanes. They may be used in systems where active control is implemented i...
Vendor:Other Category:Other
The Supertex HV301 and HV311 Hotswap Controllers provide control of power supply connection during insertion of cards or modules into live backplanes. They may be used in systems where active control is implemented in th...
Vendor:Other Category:Other
The HV300DB1 demonstration board contains all of the circuitry necessary to safely hot-plug a -48V peripheral into a live backplane. The electrolytic capacitor, Cload simulates the input filter capacitor of a DC-to-DC co...
Mfg:SOP8 Pack:HI D/C:O3 Vendor:Other Category:Other
The Supertex HV300 (and HV310), Hotswap Controller, Negative Supply control power supply connection during insertion of cards or modules into live backplanes. They may be used in traditional 'negative 48V' powered system...
Mfg:LITTELFUSE Pack:DIP/SOP D/C:08+ Vendor:Littelfuse Inc Category:Circuit Protection
GAS TUBE GDT 3KA 2750V AXIALThe HV275A Series is a 2-terminal bi-directional, voltage triggered switch designed for the protection of high voltage circuits. Switching voltages for the devices are fixed depending on the part number selected. The gas...
Vendor:Other Category:Other
The Supertex HV2731 is a 220V, 16-channel, high voltage, analog switch integrated circuit (IC) with output bleed resistors (RINT ). The output switches are con gured as 2 sets of 8 single pole, single throw analog switch...
Vendor:Other Category:Other
The Supertex HV2701 is a low charge injection 16-channel high voltage analog switch integrated circuit (IC) with bleed resistors. The device can be used in applications requiring high voltage switching controlled by low ...
Vendor:Other Category:Other
The Supertex HV2631 is a 220V, 16-channel, high voltage analog switch integrated circuit (IC). The output switches are con gured as 2 sets of 8 single pole, single throw, analog switches. The IC is intended to be used in...
Vendor:Other Category:Other
The Supertex HV2601 is a low charge injection 16-channel high voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage control signals, suc...
Vendor:Other Category:Other
The Supertex HV257DB2 is a 32-Channel, 295V, sample and hold amplifi er array with a nominal gain of 72V/V. The purpose of the HV257DB2 is to provide a means to easily evaluate the Supertex HV257FG device. A high v...
Vendor:Other Category:Other
The Supertex HV257 is a 32 channel high voltage sample and hold amplifi er array integrated circuit. It operates on a single high voltage supply, up to 300V, and two low voltage supplies, VDD and VNN.All 32 sample and ho...
Vendor:Other Category:Other
The Supertex HV256DB1 is a 32-Channel 295V amplifier array with a nominal gain of 72V/V. The purpose of the HV256DB1 is to provide a means to easily evaluate the Supertex HV256FG device. A high voltage supply, VPP, and t...
Vendor:Other Category:Other
The Supertex HV256 is a 32-channel high voltage amplifier array integrated circuit. It operates on a single high voltage supply, up to 300V and two low voltage supplies, VDD and VNN.The input voltage range is from 0V to ...
Vendor:Other Category:Other
The Supertex HV254DB1 is a 32-channel 250V amplifier array with a nominal gain of 50V/V. The HV254DB1 provides a means to easily evaluate the Supertex HV254FG device. A high voltage supply, Vpp, and two low voltage suppl...
Vendor:Other Category:Other
The Supertex HV254 is a 32-channel high voltage amplifier array integrated circuit. It operates on a 275V high voltage supply and two low voltage supplies: +5.0V and 5.0V. Each channel has its own input and output. An in...
Vendor:Other Category:Other
The HV-2405E is a single chip off line power supply that converts world wide AC line voltages to a regulated DC voltage. The output voltage is adjustable from 5VDC to 24VDC with an output current of up to 50mA. The HV-24...
Vendor:Other Category:Other
The Supertex HV238 is a 220V 16-channel high voltage analog switch integrated circuit (IC) with output bleed resistors (RINT). The output switches are configured as 2 sets of 8 single pole single throw analog switches. I...
Vendor:Other Category:Other
The Supertex HV2321 is a low charge injection, 8-channel, unipolar, negative high voltage, analog switch integrated circuit (IC) with bleed resistors. The device can be used in applications requiring high voltage switchi...
Vendor:Other Category:Other
The Supertex HV232 is a low charge injection 8-channel highvoltage analog switch integrated circuit (IC) with bleed resistors. The device can be used in applications requiring high voltage switching controlled by low vol...
Vendor:Other Category:Other
The Supertex HV2303 is a low charge injection 8-channel high voltage analog switch integrated circuit (IC) with bleed resistors.The device HV2303 can be used in applications requiring high voltage switching controlled by...
Vendor:Other Category:Other
The Supertex HV2301 is a low charge injection, 8-channel, high voltage analog switch integrated circuit (IC) with bleed resistors. The device can be used in applications requiring high voltage switching, controlled by ...
Vendor:Other Category:Other
The Supertex HV230 and HV232 are low charge injection 8-channel high-voltage analog switch integrated circuits (ICs) with bleed resistors. These devices can be used in applications requiring high voltage switching contro...
Vendor:Other Category:Other
The Supertex HV2203 is a low charge injection 8-channel high voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage signals, such as medi...
Vendor:Other Category:Other
These devices HV220 are low charge injection 8-channel high-voltage analog switch integrated circuits (ICs) intended for use in applications requiring high voltage switching controlled by low voltage control signals, suc...
Vendor:Other Category:Other
The Supertex HV219 is a low switch resistance, low charge injection 8-channel 200V analog switch integrated circuit (IC) intended primarily for medical ultrasound imaging. The device can also be used for NDE, non-destruc...
Vendor:Other Category:Other
This device HV21716 is a low charge injection 8-channel high-voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage control signals, such...
Vendor:Other Category:Other
The Supertex HV214 is a low charge injection 8-channel high voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage control signals, such ...
Vendor:Other Category:Other
This device HV2116 is an 8-channel high-voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage control signals, such as ultrasound imagin...
Vendor:Other Category:Other
Vendor:Other Category:Other
The Supertex HV209 is a 200V low charge injection 12- channel high voltage analog switch configured as 6 SPDT analog switch intended for medical ultrasound applications. Bleed resistors are integrated on the output switc...
Vendor:Other Category:Other
The Supertex HV20822 is a 220V 16-channel high-voltage analog switch integrated circuit (IC) configured as 2 sets of 8 single pole single throw analog switches. It is intended for use in applications requiring high volta...
Vendor:Other Category:Other
The Supertex HV20720 is an 8-channel high-voltage analog switch integrated circuit (IC) configured as a dual 1 of 4 analog switch. The 2 sets of 4 analog switches are controlled independently with the 2 independent 1:4 d...
Vendor:Other Category:Other
This device HV20620 is a low charge injection 8-channel high-voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage control signals, such...
Mfg:HV Pack:PLCC Vendor:Other Category:Other
This device HV20420 is a low charge injection 8-channel high-voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage control signals, such...
Vendor:Other Category:Other
This device HV20320 is a low charge injection 8-channel high-voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage control signals, such...
Vendor:Other Category:Other
The HV20220PG-G is designed as a low charge injection 8-channel high-voltage analog switch integrated circuit (ICs) which is intended for use in applications requiring high voltage switching controlled by low voltage con...
Pack:SOP-8 D/C:04+ Vendor:Other Category:Other
This device HV20220 is a low charge injection 8-channel high-voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage control signals, such...
Vendor:Other Category:Other
This particular range of ignotion coils HV200 are suitable for applications were a high gain in voltage is required in a low cost, yet safe and reliable manner. Applications include gas ignition for boilers, barbecues an...
Vendor:Other Category:Other
Not recommended for new designs. Please use HV202 instead.This device HV1816 is an 8-channel high-voltage integrated circuit (HVIC) intended for use in applications requiring high voltage switching controlled by low volt...
Vendor:Other Category:Other
Vendor:Other Category:Other
The HV14 series(14 pin DIL High Frequency HCMOS Clock Oscillator) are supplied voltage 2.5V or 3.3Volts with a high frequency range at low cost, which are designed to provide a high quality HCMOS output at high fr...
Vendor:Other Category:Other
The HV111 is a complete power management solution for switched or pluggable backplane applications up to 1.65A, running from 8.0 to -80V, requiring no external components or programming in many applications. It is not li...
Vendor:Other Category:Other
The Supertex HV101DB1 demo board contains all necessay circuitry to demonstrate the features of the HV100 hotswap controller. Intended primarily as a negative hotswap controller, the HV101 controls the negative supply pa...
Vendor:Other Category:Other
The HV100/HV101 are 3-pin hotswap controllers available in SOT-223 and MLP packages, which require no external components other than a pass element. The device contain many of the features found in hotswap controllers wi...
Vendor:Other Category:Other
Mfg:NI Pack:TO223-3P D/C:6+ Vendor:Other Category:Other
The HV100/HV101 are 3-pin hotswap controllers available in SOT-223 and MLP packages, which require no external components other than a pass element. The device contain many of the features found in hotswap controllers wi...
Vendor:Other Category:Other
This is the description about HV1.5 to HV2 of Fast Switching High Voltage Si-Rectifiers Schnelle Si-Hochspannungs-Gleichrichter. Here are the features of HV1.5. The Nominal current Nennstrom is 500 mA. The Rep...
Vendor:Other Category:Other
The HV09 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. It is especially suitable for use as a symmetric row driver in AC thin-film electroluminescent (ACTFEL) displays. The HV09 olter...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The HV04H and HV06H are low voltage serial to high voltage parallel converters with open drain outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any...
Vendor:Other Category:Other
The HV04 and HV06 are low voltage serial to high voltage parallel converters with open drain outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any...
Vendor:Other Category:Other
The HV03 and HV05 are low voltage serial to high voltage parallel converters with open drain outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any a...
Vendor:Other Category:Other
Ceramic Disc Capacitors Class 2, 500 V, 1 kV (DC) General Purpose
Vendor:Other Category:Other
Ceramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kV, 2 kV and 3 kV
Vendor:Other Category:Other
Ceramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kV, 2 kV and 3 kV
Vendor:Other Category:Other
Ceramic Disc Capacitors Class 1, 6 kV (DC)
Vendor:Other Category:Other
Ceramic Disc Capacitors Class 1 and 2, 500 V (DC) General Purpose
Vendor:Other Category:Other
Ceramic Disc Capacitors Class 1, 4 kV (DC)
Vendor:Other Category:Other
Ceramic Disc Capacitors Class 1, 3 kV (DC)
Vendor:Other Category:Other
Ceramic Disc DC Capacitors Class 1 and 2, 1 kV/2 kV/3 kV/6 kV General Purpose
Mfg:SunLED D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The HUV-2000B series uses a UV-enhanced PIN photodiode with a hybrid preamp in a hermetic TO package.
Vendor:Other Category:Other
The HUV-1100BG series uses a UV-enhanced PIN photodiode with a hybrid preamp in a hermetic TO package. The HUV-1100 uses an external feedback resistor for bandwidth flexibility.
Vendor:Other Category:Other
Mfg:SunLED D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The HUR6030PT(High-Performance Wide Temperature Range Ultra Fast Recovery Epitaxial Diode) is applicated as Antiparallel diode for high frequency switching devices, Antisaturation diode, Snubber diode, Free wheelin...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.