Circuit Diagram

12V Electronic Auto-Control Fishing Device Principle Circuit

Published:2011/6/14 23:18:00 Author:Robert | Keyword: 12V, Electronic, Auto-Control, Fishing, Principle

This device uses self-oscillation method. The transistor BG1-4, BG5-8 and T1, T2, D1 and R1 make up a high-frequency self-oscillation device. The T1's secondary output signals are high-frequency high-voltage pulses and then these pulses would be changed to DC high voltage by the doubler rectifier circuit which is made up by D1, D2, C1 and C2. And then it would input to the back stage. The back stage uses the SCR output circuit. It is a low-frequency oscillator circuit made by capacitor C6, SCR Q1, bidirectional trigger diode D5 and coil T3. This circuit would change the DC high-voltage signals to low-frequency pulses mode for output. The JP4 in the picture can be connected to a potentiometer to adjust back stage's discharge frequency. The JP5 can be connected to the high-voltage and low-voltage switch.   (View)

View full Circuit Diagram | Comments | Reading(1221)

Practical Pressure Adjustable System Circuit

Published:2011/6/14 23:19:00 Author:Robert | Keyword: Practical, Pressure, Adjustable, System

A practical pressure adjustable system circuit is shown in the picture. +12V power would be changed to 5V voltage through the 78L05 (IC2) to supply separately to MPX5100. Other circuits are all use the +12V power. MC33033 (IC1) is electrical motor controller. MC34272 (IC3) is a double operational amplifier (only one operational amplifier is used). To improve the efficiency, the electrical motor driver circuit uses a MPM3002 type driving module. Its internal part is a H-bridge circuit made up by 2 P-channel power FET (V1, V2) and 2 N-channel power FET (V3, V4). Its driving current can be 4A.   (View)

View full Circuit Diagram | Comments | Reading(582)

Blood Pressure Sensor Circuit

Published:2011/6/12 10:35:00 Author:Robert | Keyword: Blood Pressure, Sensor

As shown in the picture, this circuit uses BP01 type pressure sensor and operational amplifier MAX4472. The BP01 type pressure sensor is specially designed for blood pressure which is mainly used in portable electronic blood pressure meter. It uses the precise thick-film ceramic chip and nylon plastic package and it features high linearity, low noise and small external stress. Also it uses internal standard and temperature compensation method to improve the measuring accuracy, stability and repeatability. In its full measuring range the accuracy is ±1%, the zero point distortion would not be more than ±300μV. The MAX4472 is a MAXIM company's low-power amplifier chip with four integrated operational amplifiers.   (View)

View full Circuit Diagram | Comments | Reading(4315)

Ultrasonic Wave Liquid Level Indicator Circuit

Published:2011/6/12 19:15:00 Author:Robert | Keyword: Ultrasonic Wave, Liquid Level, Indicator

The picture shows the ultrasonic wave liquid level indicator circuit. This circuit is made up by ultrasonic wave transmitter circuit and receiving circuit. Because the ultrasonic wave features that it would not be influenced by the concentration and conductivity of the tested liquid, this circuit would have better and higher accuracy than normal contacted liquid level displaying circuit. The ultrasonic wave transmitter circuit is made up by 555, R1, W1, C1 and ultrasonic transmitter head UCM40T. The ultrasonic receiving circuit is made up by the receiving head UCM40R which is corresponding to the transmitter head, cascaded amplifier BG1 and BG2 and the detecting circuit. When the liquid level close the receiving head, the voltage meter's deflection angle would gain. And the closer to the liquid level, the bigger the corresponding deflection angle would be.   (View)

View full Circuit Diagram | Comments | Reading(907)

Switching Constant-Current Application Circuit Composed Of W723

Published:2011/6/14 23:18:00 Author:Robert | Keyword: Switching, Constant-Current, Application

The picture shows the constant-current switching regulator application circuit composed of W723 multi-port adjustable positive regulator. Its output current is 1A. In the circuit in the picture, the R1, R2 would divide the W723's reference voltage (about 7.2V) to about 3V and then add it into the in-phase input port. Also the resistance R3, R4 would divide the reference voltage to add into the out-phase input port. The R4's low port is connected with the current-divider resistance R5. When the out-phase input and in-phase input are nearly balanced, the current-divider resistance R5's voltage drop would be about 1V. R6 is used to adjust the limiting value of output ripple current.   (View)

View full Circuit Diagram | Comments | Reading(1294)

LED Transmitter Linearity-Control Circuit

Published:2011/6/11 20:18:00 Author:Robert | Keyword: LED, Transmitter, Linearity, Control

In analog system, the LED's linearity is required highly. But the linearity is different for different LED and the linearity would change as the temperature changing. This control circuit's LED driver and signal-amplifier circuit can keep the LED's linearity. The amplifier uses a couple of complementary transistors Q1 and Q2 for using to further reduce the secondary distortion. By the R1, R2 and C1's feedback it provides a 75Ω input resistance. The amplifier would send the input signal to a couple complementary driver and the driver's collector polar would output AC coupled signal on the LED. By appropriate choice of R3 it can adjust the bias current.   (View)

View full Circuit Diagram | Comments | Reading(571)

DZS-01 Fan Single-Chip Micro-Computer Integrated Circuit

Published:2011/6/15 7:28:00 Author:Robert | Keyword: Fan, Single-Chip, Micro-Computer, Integrated

The DZS-01 has three kinds of wind speed and 6h three-stages untired electronic timing, a group of shook (or fancy lantern) control functions. It uses the RC oscillator as its time base source. The DZS-01 IC uses 16-pin dual in-line plastic package. Its pin functions and data are listed in table 1, and its typical application circuit is shown in picture 1. The table 1 shows the DZS-01 IC's pin functions and data. The picture 1 shows the DZS-01 IC's typical application circuit.   (View)

View full Circuit Diagram | Comments | Reading(748)

KDD49 IC Typical Application Circuit

Published:2011/6/15 7:12:00 Author:Robert | Keyword: IC, Typical, Application

The KDD49 is a melody playing IC which is widely used in many brands of electronic musical instruments such as electronic organ. The KDD49 IC's internal part is made up by oscillator frequency control circuit, switching matrix circuit, envelop control circuit, music signal processing circuit, displaying driver control circuit and some other secondary function circuits. The melody playing typical application circuit composed of KDD49 IC is shown in the picture. The picture shows the KDD49 IC's typical application circuit.   (View)

View full Circuit Diagram | Comments | Reading(633)

DA1196 Six Sound Channel Audio DAC Integrated Circuit

Published:2011/6/15 7:44:00 Author:Robert | Keyword: Six Sound Channel, Audio, DAC, Integrated

The DA1196 is a six sound channel audio DAC IC which is widely used in home theater, DVD player, car audio and other kinds of high-definition audio systems. The DA1196 IC's internal part is made up by clock signal processing circuit, bit clock signal processing circuit, left and right clock signal processing circuit, audio data signal processing circuit, analog audio signal processing circuit and so on. The DA1196 IC uses 28-pin double in-line package and its pin functions and data are listed in table 1. The table 1 shows DA1196 IC's pin functions and data. The picture 1 shows DA1196 IC's typical application circuit.   (View)

View full Circuit Diagram | Comments | Reading(1640)

KDD28 IC Typical Application Circuit

Published:2011/6/15 2:14:00 Author:Robert | Keyword: IC, Typical, Application

The KDD28 is a double sound-channel tone power amplifier IC which is used in many audio equipments such as electronic organ, multimedia audio, computer audio and so on. The KDD28 IC has internal two channel power amplifier circuit with the same function. And it also has over-heat protection circuit and over-current protection circuit and so on. The picture shows the KDD28 IC typical application circuit.   (View)

View full Circuit Diagram | Comments | Reading(462)

KDD-08 IC Typical Application Circuit

Published:2011/6/15 7:48:00 Author:Robert | Keyword: IC, Typical, Application

The KDD-08 is a automatical rhythm IC which is widely used in many kinds of electronic musical instruments such as electronic organ. The automatical rhythm typical application circuit composed of KDD-08 IC is shown in the picture. The picture shows the KDD-08 IC's typical application circuit.   (View)

View full Circuit Diagram | Comments | Reading(571)

KA8601 IC Typical Application Circuit

Published:2011/6/17 21:04:00 Author:Robert | Keyword: IC, Typical, Application

The KA8601 is a special calling IC produced by the Samsung company which is more used in all-digital type recording telephones such as the HL868P/TSD series all-digital recording telephones and so on. The KA8601 is a large-scale special calling IC which can be used to achieve all the functions of hand-held calling and hand-free calling. The hand-held calling circuit composed of KA8601 IC is shown in picture 1 and the hand-free calling circuit composed of KA8601 is shown in picture 2. The picture 1 shows the hand-held calling typical application circuit composed of KA8601 IC. The picture 2 shows the hand-free calling typical application circuit composed of KA8601 IC.   (View)

View full Circuit Diagram | Comments | Reading(675)

CXP50116 Series Control Single-Chip Micro-Computer Integrated Circuit

Published:2011/6/17 20:47:00 Author:Robert | Keyword: Control, Single-Chip, Micro-Computer, Integrated

The CXP50116 is a system control single-chip micro-computer IC produced by the Japanese Sony company which is widely used in many brands of players. The CXP50116 has internal 488x4b bits memory, A-I intefraced circuit, display power memory, fluorescent displaying/driver circuit, logic processing circuit, central processing unit (CPU), ND switching circuit, program/counting circuit, clock oscillation circuit and some other control or secondary function circuits which are used for receiving local machine's key and remote-control telecommand signals. It would drive the circuit to do the corresponding function after processing the signals and it would control the kinds of displaying.   (View)

View full Circuit Diagram | Comments | Reading(810)

KA7552 IC Typical Application Circuit

Published:2011/6/17 6:55:00 Author:Robert | Keyword: IC, Application

The KA7552 is a switching power control IC produced by the FAIR CHLD company which is widely used in imported player, fax equipment, printers and monitors and other electronic equipment's switching power circuit. The switching power typical application circuit composed of the KA7552 IC is shown in the picture. The picture shows the KA7552 IC's typical application circuit. It shoube be noted that this picture is original switching power circuit picture. So the component symbols which do not meet the standard in the picture are unchanged. It would be difficult to buy the original model if the KA7552 IC is broken. After comparing it is found that the FA5311 power IC's electrical specifications is nearly the same with this IC which is used in computer monitors.   (View)

View full Circuit Diagram | Comments | Reading(17528)

HT6308 Integrated Circuit Internal Diagram Circuit

Published:2011/6/15 0:49:00 Author:Robert | Keyword: Integrated Circuit, Internal, Diagram

The HT6308 is a fan single-chip micro-computer IC which is widely used in many kinds of fan program control circuits. The HT6308 IC is produced by the large-scale CMOS process technology. Besides the control for normal wind speed, it can be used to select three kinds of wind, which is normal wind, simulated natural wind and sleeping wind. It can also separately control the up and down, left and right movement of the fan shook, and at the same time do the movement of comprehensive and three-dimensional shook. It has the timing function as long as 8h and has the key-sound reminder function when shutdown. Its internal diagram circuit is shown in the picture. The picture shows the HT6308 IC internal diagram circuit.   (View)

View full Circuit Diagram | Comments | Reading(583)

GL3276AD Integrated Circuit Typical Application Circuit

Published:2011/6/14 23:21:00 Author:Robert | Keyword: Integrated Circuit, Typical, Application

The GL3276ADis a infrared signal receiving integrated circuit which is always used in the player, air conditioner, audio equipments and other remote-control system. The remote-control receiving typical application circuit composed of GL3276AD integrated circuit is shown in the picture. The picture shows the GL3276AD integrated circuit's typical application circuit.   (View)

View full Circuit Diagram | Comments | Reading(2941)

F117 Integrated Circuit Typical Application Circuit (1)

Published:2011/6/14 23:32:00 Author:Robert | Keyword: Integrated, Typical, Application

The F117 is a communication single-chip micro-computer integrated circuit which is widely used in Fengling series full-standard caller ID IP telephones. The IP telephone control system typical application circuit composed of F117 integrated circuit is shown in the picture. The picture shows the F117 integrated circuit's typical application circuit.   (View)

View full Circuit Diagram | Comments | Reading(726)

CH04801-5F43 Single-Chip Micro-Computer Integrated Circuit

Published:2011/6/14 23:33:00 Author:Robert | Keyword: Single-Chip, Micro-Computer, Integrated

The CH04801-5F43 is a single-chip micro-computer integrated circuit which is widely used in Changhong etc. large screen digital color TVs. The CH0403-5H61 has internal central processing unit (CPU), clock oscillation circuit, reset control circuit, keys command decoder circuit, I(2)C bus control circuit, remote control telecommand signal processing circuit, screen displaying and character generation and processing circuit and other some control or secondary function circuit. Its internal circuit diagram and pin function and signal flow is shown in picture 1. The CH04801-5F43 integrated circuit uses 52 feet double-row package, its pin function is shown in picture 1 and its pin's letter code and data is shown in table 1.   (View)

View full Circuit Diagram | Comments | Reading(479)

CH0403-5H61 Single-Chip Computer Integrated Circuit

Published:2011/6/14 23:33:00 Author:Robert | Keyword: Single-Chip, Computer, Integrated

The CH0403-5H61 is a single-chip micro-computer integrated circuit which is widely used in Changhong etc. large screen digital color TVs. The CH0403-5H61 has internal central processing unit (CPU), clock oscillation circuit, reset control circuit, keys command decoder circuit, I(2)C bus control circuit, remote control telecommand signal processing circuit, screen displaying and character generation and processing circuit and other some control or secondary function circuit. Its internal circuit diagram and pin function and signal flow is shown in picture 1. The CH0403-5H61 integrated circuit uses 52 feet double-row package, its pin function is shown in picture 1 and its pin's letter code and data is shown in table 1.   (View)

View full Circuit Diagram | Comments | Reading(493)

Fuse Installation Method Circuit

Published:2011/6/14 23:34:00 Author:Robert | Keyword: Fuse, Installation Method

By taking measures to protect the piezoresistor it can avoid the external uncertain factor which can get damage to the piezoresistor and device. If it's going to install a fuse in the circuit, the installation method is shown in the picture. (a)Protection between wire to wire. (b)Protection between wire to wire and wire to ground.   (View)

View full Circuit Diagram | Comments | Reading(468)

Pages:1739/2234 At 2017211722172317241725172617271728172917301731173217331734173517361737173817391740Under 20