© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The AAT3201 PowerLinear™ OmniPower Low Dropout Linear Regulator is ideal for systems where a low cost solution is critical. This device features extremely low quiescent current which is typically 20A. Dropout volta...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3200 PowerLinear OmniPower Low Dropout Linear Regulator is ideal for systems where a low-cost solution is required. This device features extremely low quiescent current which is typi...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3195 is a charge-pump based, current-sink white LED driver capable of driving one to four LEDs up to 30mA, each. It automatically switches between 1x mode and 2x mode to maintain the...
Vendor:Other Category:Other
span id="lblDescription">The AAT3194 is a low noise, constant frequency charge pump DC/DC converters that use fractional (1.5X) conversion to increase efficiency in white LED applications. The device can be used to pr...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3193 is charge-pump based, current-sink white LED drivers capable of driving one to three LEDs up to 30mA, each. They automatically switch between 1x mode and 2x mode to maintain the...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3192 is charge-pump based, current-sink white LED drivers capable of driving one to three LEDs up to 30mA, each. They automatically switch between 1x mode and 2x mode to maintain the...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3190 charge pump controller provides the regulated positive and negative voltage biases required by active matrix thin-film transistor (TFT) liquid-crystal displays (LCDs), CCD Senso...
Vendor:Other Category:Other
span id="lblDescription">The AAT3183 is a high efficiency step-down charge pump converter providing up to 300mA of output current. The 1/2x (gain) charge pump converter opology provides enhanced efficiency over conven...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3177 is a high output current, high efficiency, low noise, low profile charge pump DC/DC converter. The device is ideal for multi-functional LED photo-flash applications where soluti...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3172 is a high output current, high efficiency, low noise, low profile charge pump DC/DC converter, ideal for multi-function LED photo-flash applications where solution cost, size, a...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3170 is a high output current, high efficiency, low noise, low profile charge pump DC/DC converter, ideal for multi-function LED photo-flash applications where solution cost, size, a...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3169 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for ...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3159 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for ...
D/C:07+ Vendor:Other Category:Other
The AAT3157 is a low noise, constant frequency charge pump DC/DC converter that uses a trimode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The AAT3...
Vendor:Other Category:Other
The AAT3156 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and dou-bling (2X) conversion to maximize efficiency for white LED applications. The AA...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3143 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for ...
Mfg:N/A D/C:N/A Vendor:Other Category:Other
The AAT3142 is a low noise, constant frequency charge pump DC/DC converter that uses a trimode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The devi...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3141 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for ...
Vendor:Other Category:Other
The AAT3140 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED appli- cations. The d...
Vendor:Other Category:Other
The AAT3134 is a low noise, constant frequency charge pump DC/DC converter that uses a dual mode Load Switch (1X) and fractional (1.5X) con- version to maximize efficiency for White LED appli-cations. The device can be u...
Vendor:Other Category:Other
The AAT3132 is a low noise, constant frequency charge pump DC/DC converter that uses fractional (1.5X) conversion to maximize efficiency for White LED applications. The device can be used to produce current levels up to ...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3131 is a low noise, constant frequency charge pump DC/DC converter that uses a dual mode load switch (1X) and fractional (1.5X) conversion to maximize efficiency for white LED appli...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3128 is a total solution controller for RGB LED fashion lighting. A simplified control scheme greatly reduces design complexity and accelerates time to market.
The AAT3128 contain...
Vendor:Other Category:Other
The AAT3125 USB On-the-Go (OTG) Charge Pump is a member of AnalogicTech™'s Total Power Management™ IC product family. The device integrates a high efficiency 1.5x fractional 100mA Regulated Charge Pump for su...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3123/24 is a low noise, constant frequency charge pump DC/DC converter that uses a dual mode Load Switch (1X) and fractional (1.5X) conversion to maximize efficiency for white LED ap...
Vendor:Other Category:Other
The AAT3123/24 is a low noise, constant frequen-cy charge pump DC/DC converter that uses a dualmode Load Switch (1X) and fractional (1.5X) con-version to maximize efficiency for White LED appli-cations. The device can be...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3122 is a low noise, constant frequency charge pump DC/DC converter that uses a dual mode load switch (1X) and fractional (1.5X) conversion to increase efficiency in white LED applic...
Vendor:Other Category:Other
The AAT3119 is a general purpose high efficiency voltage regulated charge pump IC that can produce output current levels up to 150mA. As a voltage regulated output device, it may be used for general voltage boost applica...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3113/4 are low noise, constant frequency charge pump DC/DC converters that use fractional (1.5X) conversion to increase efficiency in white LED applications. The devices can be used ...
Vendor:Other Category:Other
span id="lblDescription">The AAT3113/4 are low noise, constant frequency charge pump DC/DC converters that use fractional (1.5X) conversion to increase efficiency in white LED applications. The devices can be used to ...
Vendor:Other Category:Other
The AAT3112 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™ family. It is a dual voltage doubling charge pump that provides a regulated output voltage. It operates with an input voltage range...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3111 ChargePump is a MicroPower switched-capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. Using three small capacitors, t...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3110 ChargePump is a MicroPower switched-capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. Using three small capacitors, t...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3105 is a charge-pump based, current-source white LED driver capable of driving one to four LEDs up to 30mA, each. It automatically switches between 1x mode and 2x mode to maintain t...
Vendor:Other Category:Other
span id="lblDescription">
The AAT3104 is a charge-pump based, current-source white LED driver capable of driving one to four LEDs up to 30mA, each. It automatically switches between 1x mode and 2x mode to maintain t...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2862 is a highly integrated charge pump-based lighting management unit with four linear regulators optimized for single-cell lithium-ion/polymer systems. The charge pump provides pow...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2861 is a highly integrated charge pump-based lighting management unit (LMU) offering eight LED channels with three linear regulators optimized for single- cell lithium-ion/polymer s...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2848 is a tri-mode charge pump optimized for systems operating with lithium-ion/polymer batteries. The charge pump provides power for both white LED backlight and flash, with an inte...
Vendor:Other Category:Other
The AAT2847 is a highly integrated power solution for single cell Li-Ion/Polymer based liquid crystal display (LCD) display applications. It includes a four channel light emitting diode (LED) backlight driver and two int...
Vendor:Other Category:Other
The AAT2820 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™) product family. It is a triple output charge pump targeted for active matrix thin-film transistor (TFT), liquid crystal displays (...
Vendor:Other Category:Other
The AAT2806 is a dual charge pump designed to support both the white LED backlight and flash appli- cations for systems operating with lithium-ion/poly- mer batteries. The backlight charge pump is capable of driving up t...
Mfg:ANALOGIC Vendor:Other Category:Other
The AAT2805 is a dual charge pump designed to support both the white LED backlight and flash appli- cations for systems operating with lithium-ion/poly- mer batteries. The backlight charge pump is capable of driving up ...
Vendor:Other Category:Other
The AAT2803 is a dual charge pump designed to support both white LED backlight and flash applications for systems operating with lithium-ion/polymer batteries. The backlight charge pump is capable of driving up to six LE...
Vendor:Other Category:Other
The AAT2801 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™) product family. It has a dual charge pump architecture designed to support both the white LED backlight and flash applications for...
Vendor:Other Category:Other
The AAT2789 is a 2-channel synchronous step-down converter operating from an input voltage range of 2.7V to 5.5V, making it the ideal choice for single-cell Lithiumion/ polymer battery powered systems or low voltage 3.3V...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2786 is a dual output power solution. It includes a 1.5A, 1.4MHz, high-efficiency step-down converter and a high performance 150mA LDO regulator. The stepdown regulator output voltag...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2785 is a 3-channel 1.8MHz step-down converter for applications where power efficiency and solution size are critical. The input voltage range is 2.7V to 5.5V and the outputs are adj...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2784 is a 3-channel 1.8MHz step-down converter for applications where power efficiency and solution size are critical. The input voltage range is 2.7V to 5.5V and the outputs are adj...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2783 provides three independently regulated DC outputs: two step-down (Buck) regulators and a single low input voltage, low drop-out (LDO) regulator. The input voltage range for the ...
Vendor:Other Category:Other
span id="lblDescription">
General Description
The AAT2782 provides three independently regulated DC outputs: two step-down (Buck) regulators and a single low input voltage, low drop-out (LDO) regulator. The input v...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2749 is a two channel power regulator that operates from 2.3V to 5.5V. The AAT2749 contains a 3.0MHz, 600mA step-down converter and a low input voltage 300mA LDO regulator.
The st...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2713 is a high efficiency dual synchronous step-down converter for applications where power efficiency, thermal performance and solution size are critical. Input voltage ranges from ...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2689 provides two independently regulated DC outputs, consisting of a high voltage step-down (Buck) regulator and a low input voltage low dropout (LDO) regulator. The PMIC is optimiz...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2688 provides two independently regulated DC outputs: a high voltage synchronous step-down (Buck) regulator and a low input voltage step-down low dropout (LDO) regulator. The PMIC is...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2687 provides two independently regulated DC outputs; consisting of a high voltage step-down regulator and a low input voltage low dropout (LDO) regulator. The PMIC is optimized for ...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2610 is a highly integrated power management solution specifically suited for Digital Still Camera (DSC) systems, featuring seven DC-DC switching regulators for maximum operating eff...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2603 is a highly integrated power management solution for handheld mobile systems. It provides six regulated voltages from a single-cell Lithium-ion/polymer battery or a 5V supply.
...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2601 is a member of AnalogicTech Total Power Management ICTM (TPMICTM) product family. It contains a single-cell Lithium Ion/Polymer battery charger, a fully integrated step-down con...
Vendor:Other Category:Other
The AAT2557 is a fully integrated 500mA battery charger and a 300mA low dropout (LDO) linear regulator. The input voltage range is 4V to 6.5V for the battery charger and 2.7V to 5.5V for the linear regulator, making it i...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2552 is a fully integrated 500mA battery charger, a 300mA step-down converter, and a 300mA low dropout (LDO) linear regulator. The input voltage range is 4V to 6.5V for the battery c...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2515 is a dual channel synchronous buck converter operating with an input voltage range of 2.7V to 5.5V, making it ideal for applications with single-cell lithium-ion/polymer batteri...
Vendor:Other Category:Other
The AAT2513 is a high efficiency dual synchronous step-down converter for applications where power efficiency, thermal performance and solution size are critical. Input voltage ranges from 2.7V to 5.5V,making it ideal fo...
Vendor:Other Category:Other
The AAT2512 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™) product family. It is a dual channel synchronous buck converter operating with an input voltage range of 2.7V to 5.5V, making it i...
Vendor:Other Category:Other
The AAT2511 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™) product family. It is comprised of two 1MHz step-down converters designed to minimize external component size and cost. The input ...
Vendor:Other Category:Other
The AAT2510 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™) product fam-ily. It is comprised of two 1MHz step-down con-verters designed to minimize external component size and cost. The inp...
Vendor:Other Category:Other
The AAT2506 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™) product family.It is a low dropout (LDO) linear regulator and a step-down converter with an input voltage range of 2.7V to 5.5V, m...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2504 is a three-channel regulator consisting of a step-down converter with an input voltage range of 2.7V to 5.5V plus two low dropout (LDO) linear regulators. The two LDOs have an i...
Vendor:Other Category:Other
span id="lblDescription">The AAT2503 is a three-channel regulator consisting of a step-down converter with an input voltage range of 2.7V to 5.5V plus two low dropout (LDO) linear regulators. The step-down converter A...
Vendor:Other Category:Other
span id="lblDescription">The AAT2500M is a high efficiency 400mA step-down converter and 300mA low dropout (LDO) linear regulator for applications where power efficiency and solution size are critical. The typical inp...
Vendor:Other Category:Other
The AAT2500 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™) product family. It is a low dropout (LDO) linear regulator and a step-down converter with an input voltage range of 2.7V to 5.5V, ...
Vendor:Other Category:Other
The AAT2158 SwitchReg is a 1.5A step-down converter ith an input voltage range of 2.4V to 5.5Vand an adjustable output voltage from 0.6V to VIN. he 1.4MHz switching frequency enables the use f small external components. ...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2148 SwitchReg is a 2MHz step-down converter with an input voltage range of 2.7V to 5.5V and output voltage as low as 0.6V. It is optimized to react quickly to a load variation.
...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2146 SwitchReg is a 2MHz step-down converter with an input voltage range of 2.7V to 5.5V and output voltage as low as 0.6V. It is optimized to react quickly to a load variation. The ...
Vendor:Other Category:Other
span id="lblDescription">
The AAT2120 SwitchReg is a 1.8MHz step-down converter with an input voltage range of 2.7V to 5.5V and output as low as 0.6V. Its low supply current, small size, and high switching frequency...
Vendor:Other Category:Other
The AAT1501/A is a charge pump DC/DC converter mainly used for white LED backlighting.It operates with an input voltage ranging from 2.7V to 5.0V to generate constant 5.0V (AAT1501) or 4.5V (AAT1501A) output. The regulat...
Vendor:Other Category:Other
The AAT1500 is a step-up converter that provides a solution to drive 1 to 4 white LEDs with a constant current from a Lithium Ion cell, and its switching frequency is fixed at 1 MHz. The AAT1500 offers a low 0.25V r...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The AAT1403B is SIX-CHANNEL DIGITAL STILL CAMERA POWER SUPPLY.The AAT1403B has 13 features.The first one is complete PWM Power Control Circuitry.The second one is Input Voltage Range: 1.4V to 6.5V.The third one is Low St...
Vendor:Other Category:Other
The AAT1403A provides an integrated six-channel pulse-width-modulation (PWM) solution for the power supply of DC-DC converter; this device offers systemengineer flexibility to tailor-make the power supply circuitry for s...
Vendor:Other Category:Other
The AAT1401 provides an integrated four channel pulse-width-modulation (PWM) solution for the power supply of DC-DC converter; this device offers system engineer flexibility to tailor-make the power supply circuitry for ...
Vendor:Other Category:Other
The AAT1351 provides an integrated two-channel pulse-width-modulation (PWM) solution for the power supply of DC-DC system; this device offers the systems engineer flexibility to tailor-make the power supply circuitry...
Vendor:Other Category:Other
The AAT1343 provides an integrated two-channel pulse-width-modulation (PWM) solution for the power supply of DC-DC system; this device offers the systems engineer flexibility to tailor-make the power supply circuitry for...
Vendor:Other Category:Other
The AAT1341 provides an integrated two-channel pulse-width-modulation (PWM) solution for the power supply of DC-DC system; this device offers system engineers the flexibility to tailor-make the power supply circuitry...
Vendor:Other Category:Other
span id="lblDescription">
The AAT1299 is a high efficiency, synchronous, fixed frequency, step-up converter with start-up inrush current limit and short-circuit protection. The input voltage ranges from 1.0V to the ...
Vendor:Other Category:Other
The AAT1276 SwitchReg is a 2MHz, 500mA synchronous boost converter with an integrated current-limiting load switch controlled output. The AAT1276 operates from a single-cell Lithium-ion/ polymer battery source and provid...
Vendor:Other Category:Other
span id="lblDescription">
The AAT1275 SwitchReg is a 2MHz, 500mA synchronous boost converter with an integrated current-limiting load switch controlled output. The AAT1275 operates from a single-cell Lithium-ion/ po...
Vendor:Other Category:Other
span id="lblDescription">
The AAT1272 is a high-efficiency, high-current boost converter capable of 1.5A typical output current. It is an ideal power solution for LED photo flash applications in all single cell Li-i...
Vendor:Other Category:Other
The AAT1271A is a high-efficiency, high-current boost converter capable of 1.5A typical output current. It is an ideal power solution for LED photo flash applications in all single cell Li-ion powered products.The AAT127...
Vendor:Other Category:Other
span id="lblDescription">
The AAT1271 is a high-efficiency, high-current boost converter capable of 1.5A typical output current. It is an ideal power solution for LED photo flash applications in all single cell Li-i...
Vendor:Other Category:Other
span id="lblDescription">The AAT1270 is a high-efficiency, high-current boost converter capable of 1A maximum output current. It is an ideal power solution for high brightness LED or LED photo flash applications in al...
Vendor:Other Category:Other
The AAT1265 is designed for single-cell or dual-cell alkaline, NiMH, or NiCd or single-cell lithium-ion/polymer (Li-Ion) battery-powered applications. It is a high efficiency, synchronous, fixed frequency, step-up conver...
Vendor:Other Category:Other
The AAT1239-1 is a high frequency, high efficiency constant current boost converter capable of driving up to ten (10) series-connected white LEDs or 40V. It is an ideal power solutions for backlight applications with up ...
Vendor:Other Category:Other
The AAT1236 is a highly integrated, high efficiency power solution for white LED and keypad backlights in mobile/portable devices. It is based on a switching boost converter which steps up the single cell lithium- ion/po...
Vendor:Other Category:Other
The AAT1235 is a highly integrated, high efficiency power solution for white LED backlight and keypad backlights in mobile/portable devices. It is based on a switching boost converter which steps up the single- cell lith...
Vendor:Other Category:Other
span id="lblDescription">
The AAT1232 is a high frequency, high efficiency boost converter capable of 24V maximum output voltage. The internal power switch can deliver 100mA load current. It is the ideal power solut...
Vendor:Other Category:Other
span id="lblDescription">
The AAT1231/1231-1 are high frequency, high efficiency constant current boost converters capable of 24V maximum output voltage. Both devices are ideal power solutions for backlight applicat...
Vendor:Other Category:Other
The AAT1230/1230-1 is a high frequency, high efficiency boost converter capable of 18V maximum output voltage. The internal power switch can delive 100mA load current. It is the ideal power solution to power OLED, LCD, a...
Vendor:Other Category:Other
span id="lblDescription">
The AAT1218 is a general purpose DC/DC synchronous boost (step-up) converter providing a tightly regulated DC output voltage for continuous output currents up to 1A (minimum). Operating inp...
Mfg:ANLOG D/C:07+ Vendor:Other Category:Other
The AAT1217 a high efficiency, synchronous, fixed frequency, step-up converter designed for singlecell or dual-cell alkaline, NiMH, or NiCd batterypowered applications. The high 1.2MHz switching frequency and completely ...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.