© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The ACS102 belongs to the AC line switch family built around the ASD™ concept. This high performance device is able to control an up to 0.3 A load device.The ACS102 switch embeds a high voltage clamping structure t...
Mfg:ST D/C:00+ Vendor:STMicroelectronics Category:Discrete Semiconductor Products
IC AC LINE SWITCH 500V TO-92The ACS102 belongs to the AC line switch family built around the ASD concept. This high performance 5 mA switch circuit is able to control an up to 0.3 A load.The ACS102 switch embeds a high voltage clamping structure to...
Mfg:ST Pack:SOP/3.9/8P D/C:06+ Vendor:Other Category:Other
The ACS102 belongs to the AC line switch family built around the ASD concept. This high performance 5 mA switch circuit is able to control an up to 0.3 A load.The ACS102 switch embeds a high voltage clamping structure to...
Vendor:Other Category:Other
The ACS101A is a complete controller, driver and receiver IC, supporting fullduplex asynchronous transmission from DC to 76.8kbps and synchronous data rates up to 512kbps over one optical fiber. The ACS101A also supports...
Vendor:Other Category:Other
The Radiation Hardened ACS08MS is a Quad 2-Input AND Gate. For each gate, a HIGH level on both the A and B inputs results in a HIGH level on the Y output. A LOW level on either the A or B input results in a LOW level on ...
Vendor:Other Category:Other
The Radiation Hardened ACS05MS is a Hex Inverter with open drain outputs. This device inverts a HIGH level on eachinput to a LOW level on the corresponding Y output. A LOW level on the input causes the corresponding Y ou...
Vendor:Other Category:Other
Vendor:Other Category:Other
The Intersil ACS03MS is a Radiation Hardened quad 2-input NAND gate with open drain outputs. The open drain output can drive resistive loads from a separate supply voltage.The ACS03MS utilizes advanced CMOS/SOS technolog...
Vendor:Other Category:Other
The Radiation Hardened ACS02MS is a Quad 2-Input NOR Gate. For each gate, a HIGH level on either A or B input results in a LOW level on the Y output. A LOW level on both the A and B inputs results in a HIGH level on the ...
Vendor:Other Category:Other
The Intersil ACS00MS is a Radiation Hardened quad 2-Input NAND gate. A high logic level on both inputs forces the output to a logic low state.The ACS00MS utilizes advanced CMOS/SOS technology to achieve high-speed operat...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The ACQ-V2-1739 is designed to power 2 CCFL's at a nominal power level of 8.4 Watts.Intensity control is accomplished by the user providing a variable DC level @ pin 6 of CON1. Features of the ACQ-V2-1739 are:(1)weight=...
Vendor:Other Category:Other
The ACQ-V2-1533 is designed to power 2 CCFL's at a nominal power level of 3.7 watts.The ACQ-V2-1533 features analog dimming control via a dc control level @ pin 6 of CON1.A dc reference voltage is available @ pin 8 of CO...
Vendor:Other Category:Other
The ACQ-R1-1465 is designed to power 2 CCFL's at a nominal power level of 6mA/tube and regulated over an input voltage range of +8V to +18V.The ACQ-R1-1465 features analog dimming control via a dc control level @ pin 6 o...
Vendor:Other Category:Other
The ACQ-12-1655 is designed to power 2 CCFL's at a nominal power level of 4.5W from a +12V source.The ACQ-12-1655 features analog dimming control via a dc control level @ pin 6 of CON1.A dc reference voltage is available...
Vendor:Other Category:Other
The ACQ-12-1454 is designed to power 2 CCFL's at a nominal power level of 3.5W per tube.The ACQ-12-1454 features analog dimming control via a dc control level @ pin 6 of CON1.A dc reference voltage is available @ pin 7 o...
Vendor:Other Category:Other
The ACPM-7891 is a fully matched tri-band EGSM/DCS/PCS power amplifier module designed on Agilent Technologies'leading edge Enhancement Mode PHEMT (E-pHEMT) process.The ACPM-7891 has the highest Power-added Efficiency (P...
Vendor:Other Category:Other
The ACPM-7886 is an amplifier module designed for TD-SCDMA applications in the 2010-2025MHz band. Designed around Avago Technologies' GaAs Enhancement Mode pHEMT process, the ACPM-7886 offers premium performance in a ver...
Mfg:Agilent Pack:QFN D/C:2005+ Vendor:Other Category:Other
Vendor:Other Category:Other
The ACPM-7833 is a fully matched CDMA Power amplifier module. Designed around Agilent Technologies' new Enhancement Mode pHEMT process, the ACPM-7833 offers premium performance in a very small form factor. Fully matched ...
Vendor:Other Category:Other
The ACPM-7824 is a fully matched 10-pin surface mount module developed for cellular and it's operates in the 824-849MHz bandwidth.
Mfg:AVAGO D/C:2006 Vendor:Other Category:Other
The ACPM-7821 is a CDMA (Code Division Multiple Access) power amplifier module designed for handsets operating in the 898925MHz bandwidth. The ACPM-7821 meets stringent CDMA linearity requirements up to 28 dBm output pow...
Vendor:Other Category:Other
The ACPM-7813 is a fully matched CDMA Power amplifier module. Designed around Agilent Technologies' new Enhancement Mode pHEMT process, the ACPM-7813 offers premium performance in a very small form factor. Fully matched ...
Vendor:Other Category:Other
The ACPM-7392 is a fully matched 10-pin surface mount module developed for UMTS Band4 and Band9. This Power amplifier module ACPM-7392 operates in the 1710 - 1785MHz bandwidth and meets stringent UMTS linearity requireme...
Vendor:Other Category:Other
The ACPM-7391, a Wide-band code Division Multiple Access (WCDMA) Power Amplifer is a fully matched 10-pin surface mount module developed for WCDMA handset applications.
Vendor:Other Category:Other
The ACPM-7382, a fully matched 10-pin surface mount module developed for UMTS Band 1 and operates in the 1920-1980MHz bandwidth. This Power Amplifier ACPM-7382 meets stringent UMTS linearity requirements up to 28.25dBm o...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
The ACPM-7381, a Wide-band code Division Multiple Access (WCDMA) Power Amplifer is a fully matched 10-pin surface mount module developed for WCDMA handset applications. This power amplifier module is developed to cover 1...
Mfg:AVAGOTECH Vendor:Other Category:Other
The ACPM-7381, a Wide-band Code Division Multiple Access (W-CDMA) Power Amplifier (PA), is a fully matched 10-pin surface mount module developed for W-CDMA handset applications. This power amplifier module operates in th...
Mfg:AGI Pack:1,000 Vendor:Other Category:Other
The ACPM-7371, a Wide-band code Division Multiple Access (WCDMA) Power Amplifer is a fully matched 10-pin surface mount module developed for WCDMA handset applications. This power amplifier module is designed to enhance...
Mfg:AVAGO Vendor:Other Category:Other
The ACPM-7353 is a dual-band Power Amplifier Module designed for code division multiple access cellular and PCS. Its meets stringent CDMA linearity requirements to and beyond 28dBm output power in both bands
Mfg:AGI Pack:4,000 Vendor:Other Category:Other
The ACPM-7331, a Wide-band code Division Multiple Access (WCDMA) Power Amplifer is a fully matched 10-pin surface mount module developed for WCDMA handset applications. This power amplifier module is developed to cover 1...
Mfg:AVAGOTECH Vendor:Other Category:Other
The ACPM-7331, a Wide-band Code Division Multiple Access (W-CDMA) Power Amplifier (PA), is a fully matched 10-pin surface mount module developed for W-CDMA handset applications. This power amplifier module operates in th...
Mfg:AGI D/C:07+ Vendor:Other Category:Other
The ACPM-7311, a Wide-band code Division Multiple Access (WCDMA) Power Amplifer is a fully matched 10-pin surface mount module developed for WCDMA handset applications. This power amplifier module is developed to cover 8...
Mfg:AVAGOTECH Vendor:Other Category:Other
The ACPM-7311, a Wide-band Code Division Multiple Access (W-CDMA) Power Amplifier (PA), is a fully matched 10-pin surface mount module developed for W-CDMA handset applications. This power amplifier module operates in th...
Vendor:Other Category:Other
The single-channel ACPL-W70L is a 15 MBd CMOS optocoupler in a Stretched SO6 package. The optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. Basic buil...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 10MBD DIPThe ACPL-W611/ACPL-P611 optocoupler is an optically coupled digital gate that combines a GaAsP light emitting diode and an integrated high gain photo detector.The ACPL-W611/ACPL-P611 output of the detector IC is an open ...
Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 15MBD 3.3V 6-SOICThe ADBL-A321 is designed as one kind of automotive wide operating temperature 1MBd digital optocoupler that can be used in (1)automotive IPM driver for DC-DC converters and motor inverters; (2)CANBus communications inte...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 15MBD 3.3V 6-SOICThe ACPL-W60L/K63L optocouplers are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. The output of the detector IC is an open collector Schottky-clamped transi...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
The ACPL-W456 contains a GaAsP LED optically coupled to an integrated high gain photo detector. Minimized propagation delay difference between devices make this optocoupler excellent solution for improving inverter effic...
Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 1MBD VDE 6-SOICThe ACPL-W454-560E is designed as one kind of automotive wide operating temperature 1MBd digital optocoupler that can be used in (1)automotive IPM driver for DC-DC converters and motor inverters; (2)CANBus communications...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 1MBD TTL/IPM 6-SOICThe ACPL-W454/P454 is similar to Avago Technologies other high speed transistor output optocouplers, but with shorter propagation delays and higher CTR. The ACPL-W454/P454 also has a guaranteed propagation delay differen...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER IGBT 0.4A 6-SOICThe ACPL-W314 consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applica...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER IGBT 0.4A 6-SOICThe ACPL-W302 consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applica...
Vendor:Other Category:Other
The ACPL-T350 contains a GaAsP LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverte...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 10MBD TTL 6-SOICThe ACPL-W611/ACPL-P611 optocoupler is an optically coupled digital gate that combines a GaAsP light emitting diode and an integrated high gain photo detector. The output of the detector IC is an open collector Schottky ...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
The ACPL-P480 fast speed optocoupler contains a GaAsP LED and photo detector with built-in Schmitt trigger to provide logic-compatible waveforms, eliminating the need for additional wave shaping. The totem pole output el...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
The ACPL-P456 contains a GaAsP LED optically coupled to an integrated high gain photo detector. Minimized propagation delay difference between devices make this optocoupler excellent solution for improving inverter effic...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 1MBD TTL/IPM 6-SOICThe ACPL-W454/P454 is similar to Avago Technologies other high speed transistor output optocouplers, but with shorter propagation delays and higher CTR. The ACPL-W454/P454 also has a guaranteed propagation delay differen...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
The ACPL-P314/W314 consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter ap...
Vendor:Other Category:Other
The ACPL-P302 consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applica...
Vendor:Other Category:Other
The single-channel ACPL-M75L is a 15 MBd CMOS optocoupler in a SOIC-5 package. The optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. Basic building b...
Vendor:Other Category:Other
This small outline wide operating temperature, high CMR, high speed, logic gate optocoupler is a single channel device ACPL-M61U-000E in a five lead miniature footprint.The ACPL-M61U-000E optically coupled gates combine ...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 15MBD 3.3V 5-SOICThe ACPL-M60L optocoupler is an optocoupled logic gate that combines a GaAsP light emitting diode and an integrated high gain photo detector. The output of the detector IC is an open collector Schottky-clamped transistor...
Vendor:Other Category:Other
The ACPL-M46U-000E is an extended temperature IPM interface optocoupler for used in the industrial applications. it consists of a AlGaAs optically coupled to an integrated high gain photo detector. Minimized propagation ...
Vendor:Other Category:Other
The ACPL-M46T-000E automotive optocoupler consists of a AlGaAs LED optically coupled to an integrated high gain photo detector. Minimized propagation delay difference between devices ACPL-M46T-000E make these optocoupler...
Vendor:Other Category:Other
The ACPL-M43U is a new product with enhanced features to meet the extended temperature operating requirement in the industrial applications. This diode-transistor Optocoupler houses a new AlGaAsP for higher LED reliabili...
Vendor:Other Category:Other
The ACPL-M43T is a single channel, high temperature, high CMR, high-speed digital automotive optocoupler in a five lead miniature footprint. The SO-5 JEDEC registered (MO-155) package outline does not require "through ho...
Vendor:Other Category:Other
The dual-channel ACPL-K73L is a 15 MBd CMOS optocoupler in a stretched SO8 package. The optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. The basic b...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 15MBD 3.3V 8-SOICThe ACPL-W60L/K63L are LVTTL/LVCMOS compatible optocoupler gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. The output of the detector IC is an open collector Schottky-clamped t...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER 1CH 1MBS 8-SOICThe ACPL-K453 is a single channel devices in an eightlead miniature footprint. (next para)This diode-transistor optocoupler uses an insulatinglayer between the light emitting diode and anintegrated photo detector to prov...
Vendor:Other Category:Other
The ACPL-K312 contains a GaAsP LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverte...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
TThe ACPL-J313 contains a AlGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inver...
Vendor:Other Category:Other
The ACPL-H312 contains a GaAsP LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverte...
Vendor:Other Category:Other
The ACPL-C78A/C780/C784 isolation amplifier family was designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog volta...
Vendor:Other Category:Other
The ACPL-C78A/C780/C784 isolation amplifier family was designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog volta...
Vendor:Other Category:Other
The ACPL-C78A/C780/C784 isolation amplifier family was designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog volta...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
Avago ACPL-847 is a DC-input quad channel full-pitch phototransistor optocoupler which contains four light emitting diodes optically coupled to four separate transistors. It is packaged in a 16-pin DIP package. ACPL-847-...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
Avago ACPL-844 is an AC-input quad channel full-pitch phototransistor optocoupler which contains eight light emitting diode optically coupled to four separate phototransistor. It is packaged in a 16-pin DIP package. ACPL...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
Avago ACPL-827 is a DC-input dual channel full-pitch phototransistor optocoupler which contains two light emitting diode optically coupled to two separate transistor. It is packaged in a 8-pin DIP package. ACPL-827 is al...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
The ACPL-824 is an AC-input dual channel full-pitch phototransistor optocoupler which contains four light emitting diode optically coupled to two separate phototransistor. It is packaged in a 8-pin DIP package.ACPL-824 i...
Vendor:Other Category:Other
The ACPL-796J is a 1-bit, second-order sigma-delta (-) modulator converts an analog input signal into a high-speed data stream with galvanic isolation based on optical coupling technology. The ACPL-796J operates from a 5...
Vendor:Other Category:Other
The ACPL-785J isolation amplifier is designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog voltage drop is sensed ...
Vendor:Other Category:Other
The ACPL-782T automotive isolation amplifier family was designed for current sensing in electronic motor drives and battery system. In a typical implementation, motor currents or battery current flow through an external ...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
Available in either an 8-pin DIP or SO-8 package style respectively, the ACPL-772L or ACPL-072L optocouplers utilize the latest CMOS IC technology to achieve an outstanding 25MBd minimum data rate and 6ns maximum pulse w...
Vendor:Other Category:Other
The ACPL-5730L is a commercial grade two channel hermetically sealed 3.3V optocoupler in an 8-Pin DIP ceramic package with gold plated leads. Solder dipped leads and various lead form options are also available. See the ...
Vendor:Other Category:Other
The ACPL-5700L is a commercial grade single channel hermetically sealed 3.3V optocoupler in an 8-Pin DIP ceramic package with gold plated leads. Solder dipped leads and various lead form options are also available. See t...
Vendor:Other Category:Other
The ACPL-563KL-200 is a High Reliability Class K device with solder dipped leads. The solder in this device contains lead. Please use the Datasheet link for further details.
Vendor:Other Category:Other
The ACPL-563KL is a highest reliability Class K two channel hermetically sealed 3.3V optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also availabl...
Vendor:Other Category:Other
The ACPL-5631L-200 is a High Reliability Class H device with solder dipped leads. The solder in this device contains lead. Please use the Datasheet link for further details.
Vendor:Other Category:Other
The ACPL-5631L is a high reliability Class H two channel hermetically sealed 3.3V optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also available. ...
Vendor:Other Category:Other
The ACPL-5630L-200 is a Commercial Grade device with solder dipped leads. The solder in this device contains lead. Please use the Datasheet link for further details.
Vendor:Other Category:Other
The ACPL-5630L is a commercial grade two channel hermetically sealed 3.3V optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also available. See the ...
Vendor:Other Category:Other
The ACPL-560KL-200 is a High Reliability Class K device with solder dipped leads. The solder in this device contains lead. Please use the Datasheet link for further details.
Vendor:Other Category:Other
The ACPL-560KL is a highest reliability Class K single channel hermetically sealed 3.3V optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also avail...
Vendor:Other Category:Other
The ACPL-5601L-200 is a High Reliability Class H device with solder dipped leads. The solder in this device contains lead. Please use the Datasheet link for further details.
Vendor:Other Category:Other
The ACPL-5601L is a high reliability Class H single channel hermetically sealed 3.3V optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also availabl...
Vendor:Other Category:Other
The ACPL-5600L-200 is a Commercial Grade device with solder dipped leads. The solder in this device contains lead. Please use the Datasheet link for further details.
Vendor:Other Category:Other
The ACPL-5600L is a commercial grade single channel hermetically sealed 3.3V optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also available. See t...
Mfg:AGILENT D/C:08+ Vendor:Avago Technologies US Inc. Category:Isolators
OPTOCOUPLER IPM 5MBD 8-DIPThe ACPL-4800 fast speed optocoupler contains a GaAsP LED and photo detector with built-in Schmitt trigger to provide logic-compatible waveforms, eliminating the need for a pull up resistor and allows for direct drive In...
Vendor:Other Category:Other
The ACPL-333J is an advanced 2.5 A output current, easy-to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under v...
Mfg:AVAGO Pack:SOP-16 D/C:07+PB Vendor:Other Category:Other
The ACPL-332J is an advanced 2.5 A output current, easy-to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under v...
Mfg:AVAGO Pack:SOP-16 D/C:07+PB Vendor:Other Category:Other
The ACPL-331J is an advanced 1.5 A output current, easy-to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under v...
Vendor:Other Category:Other
The ACPL-330J is an advanced 1.5 A output current, easy-to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, auto-fa...
Mfg:AGILENT D/C:08+ Vendor:Other Category:Other
The ACPL-3130 contains a GaAsP LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverte...
Vendor:Other Category:Other
The ACPL-312U device contains an AIGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. This wide operating temperature optocoupler is ideally suited for driving power IGBTs and MOSF...
Vendor:Other Category:Other
The ACPL-268KL-200 is a High Reliability Class K device with solder dipped leads. The solder in this device contains lead. Please use the Datasheet link for further details.
Vendor:Other Category:Other
The ACPL-268KL is a highest reliability Class K two channel hermetically sealed 3.3V optocoupler in a 16-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also availabl...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.