ACS102-5Tx

Features:

· Blocking voltage : V_DRM / V_RRM = 500V
· Clamping voltage : V_CL = 600 V
· Nominal current : I_T(RMS) = 0.2 A
· Gate triggering current : I_GT < 5 mA
· Switch integrated driver
· Triggering current is sourced by the gate
· SO-8 package:
  - drive referenceCOMconnected to 2 cooling pins
  - 3.5 mm creepage distance from pin OUT to other pins


Application

·  AC on-off static switching in appliance &
   industrial control systems
·  Drive of low power high inductive or resistive
   loads like
   - relay, valve, solenoid, dispenser
   - pump, fan, micro-motor
   - low power lamp bulb, door lock


Specifications

Symbol	Parameter			Value	Unit
VDRM /VRRM	Repetitive peak off-state voltage		Tj = 125 °C	500	V
IT(RMS)	RMS on-state current full cycle sine wave 50 to 60 Hz	TO-92	Tamb = 100 °C	0.2	A
		SO-8	Tamb = 100 °C	0.2	A
ITSM	Non repetitive surge peak on-state current Tj initial = 25°C, full cycle sine wave		F =50 Hz	7.3	A
			F =60 Hz	8	A
dI/dt	Critical rate of repetitive rise of on-state current IG = 10mA with tr = 100ns		F =120 Hz	20	A/s
VPP	Non repetitive line peak pulse voltage		note 1	2	kV
Tstg	Storage temperature range			- 40 to + 150	°C
Tj	Operating junction temperature range			- 30 to + 125	°C
Tl	Maximum lead temperature for soldering during 10s			260	°C

Description

The ACS102 belongs to the AC line switch family built around the ASD™ concept. This high performance device is able to control an up to 0.3 A load device.

The ACS102 switch embeds a high voltage clamping structure to absorb the inductive turn off energy and a gate level shifter driver to separate the digital controller from the main switch. It is triggered with a negative gate current flowing out of the gate pin. For further technical information, please refer to AN1172 application note.