Features: • Input Supply Voltage Range: 2.7V to 5.5V• Tri-Mode (1X/1.5X/2X) Charge Pump:- Delivers up to 120mA of Output Current• Integrated LCD Display Solution:- Four-Channel WLED Backlight• User-Programmable WLED CurrentScales: 30mA, 20mA and 15mA.- Sixteen Programmable ...
AAT2847: Features: • Input Supply Voltage Range: 2.7V to 5.5V• Tri-Mode (1X/1.5X/2X) Charge Pump:- Delivers up to 120mA of Output Current• Integrated LCD Display Solution:- Four-Channel WLE...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.17 - .23 / Piece
Switching Converters, Regulators & Controllers 400mA Step-Down Convrt + 300mA LDO
Symbol | Parameter | Value | Units |
VN | [IN, OUT, D1, D2, D3, D4] to GND | -0.3 to 6.0 | V |
VN | [C1+, C1-, C2+, C2-] to GND | -0.3 to VOUT + 0.3 | V |
VN | [LDOA, LDOB, FBA, FBB, EN/SET, ENA, ENB] to GND | -0.3 to VIN + 0.3 | V |
TJ | Operating Temperature Range | -40 to 150 | °C |
TLEAD | Maximum Soldering Temperature (at leads, 10 sec) | 300 | °C |
The AAT2847 is a highly integrated power solution for single cell Li-Ion/Polymer based liquid crystal display (LCD) display applications. It includes a four channel light emitting diode (LED) backlight driver and two integrated 200mA low dropout voltage regulators (LDOs) as additional power supplies for display and camera related chipsets.
The backlight driver in the AAT2847 is a low noise tri-mode DC/DC charge pump converter. Each of the four channels of the backlight driver is capable of delivering up to 20mA of bias currents for white LEDs. The white LED (WLED) backlight bias current matching is 1% which helps provide uniform display brightness.
AnalogicTech's AS2Cwire™ (Advanced Simple Serial Control™) serial digital interface is used to enable, disable, and set the current for each backlight LED channel. Each LED channel has sixteen available current level settings in three separate current scales, plus four available current level settings on a low level current scale.
Each LED channel is equipped with built-in short circuit protection and auto disable functionality. A low shutdown current feature disconnects the load from the input and reduces quiescent current to less than 1A.
The AAT2847 is available in the thermally enhanced 20-pin 3x4x0.75mm TQFN package.