Features: `VIN Range: 2.7V to 5.5V`Output Current:-Channel 1: 600m-Channel 2: 600m`96% Efficient Step-Down Converter`Low No Load Quiescent Current-60A Total for Both Converte`Integrated Power Switches`100% Duty Cycle`1.7MHz Switching Frequency`Optional Fixed Frequency or External SYNC`Logic Select...
AAT2513: Features: `VIN Range: 2.7V to 5.5V`Output Current:-Channel 1: 600m-Channel 2: 600m`96% Efficient Step-Down Converter`Low No Load Quiescent Current-60A Total for Both Converte`Integrated Power Switch...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.25 - .33 / Piece
Switching Converters, Regulators & Controllers Low Voltage 2MHz Step-Up DC/DC Convrt
US $.26 - .34 / Piece
Switching Converters, Regulators & Controllers 1.5A step-down Cnvrt
Symbol |
Description |
Value |
Units |
VIN1/2 GND, PGND1/2 |
Input Voltage Ground Pins |
-0.3 to 6.0 -0.3 to +0.3 |
V V |
EN1/2, SYNC, LX1/2, FB1/2, PS |
Maximum Rating |
-0.3 to VCC +0.3 |
V |
TJ TS TLEAD |
Operating Temperature Range Storage Temperature Range Maximum Soldering Temperature (at leads, 10 sec) |
-40 to 150 -65 to 150 300 |
|
The AAT2513 is a high efficiency dual synchronous step-down converter for applications where power efficiency, thermal performance and solution size are critical. Input voltage ranges from 2.7V to 5.5V,making it ideal for systems powered by single-cell lithium-ion/polymer batteries.
Each converter AAT2513 is capable of 600mA output current and has its own enable pin. Efficiency of the converters is optimized over full load range. Total no
load quiescent current is 60A, allowing high efficiency even under light load conditions.
The integrated power switches AAT2513 are controlled by pulse width modulation (PWM) with a 1.7MHz typical switching frequency at full load, which minimizes the size of external components. Fixed frequency,low noise operation can be forced by a logic signal on the MODE pin. Furthermore, an external clock can be used to synchronize the switching frequency of both converters.
A phase shift pin (PS) is available to operate the two converters 180 out of phase at heavy load test achieve low input ripple.
The AAT2513 is available in a Pb-free, thermally enhanced 16-pin QFN33 package and is specified for operation over the -40C to +85C temperatu range.