Features: • VIN Range: 2.7V to 5.5V• Dual Charge Pump - Flash: Charge Pump Doubler - Backlight: Tri-Mode Charge Pump• Drives Low-VF and High-VF LEDs• Up to Four 30mA Outputs• 32-Position Logarithmic Scale with Digital Control• Low Noise Constant Frequency Operat...
AAT2801: Features: • VIN Range: 2.7V to 5.5V• Dual Charge Pump - Flash: Charge Pump Doubler - Backlight: Tri-Mode Charge Pump• Drives Low-VF and High-VF LEDs• Up to Four 30mA Outputs&...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.26 - .34 / Piece
Switching Converters, Regulators & Controllers 1.5A step-down Cnvrt
US $.26 - .34 / Piece
Switching Converters, Regulators & Controllers 1.5A step-down Cnvrt
Symbol | Description |
Value |
Units |
VIN | Input Voltage |
-0.3 to 6 |
V |
VEN/SET | EN/SET to GND Voltage |
-0.3 to VIN + 0.3 |
V |
IOUT 2 | Maximum DC Output Current |
120 |
mA |
TJ | Operating Junction Temperature Range |
-40 to 150 |
The AAT2801 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™) product family. It has a dual charge pump architecture designed to support both the white LED backlight and flash applications for systems operating with Lithium-Ion batteries. The backlight charge pump provides power required to drive up to four LEDs. To maximize power efficiency, it automatically selects 1X, 1.5X, or 2X mode. The device produces current levels up to 30mA on each of its four current source outputs. AnalogicTech's Simple Serial Control™ (S2Cwire™) interface is used to enable, disable, and set the LED drive current with a 32-level logarithmic scale LED brightness control.
The flash charge pump AAT2801 is a charge pump doubler with a regulated output voltage. It is designed to deliver 120mA of continuous current and up to 250mA of pulsed current. It has an independent enable pin for improved power savings.
The AAT2801 is equipped with AnalogicTech's AutoBias™ technology which allows individual LEDs to be powered either by charge pump or battery input, determined internally and automatically to maximize the power efficiency even with a large difference in LED forward voltage.
The AAT2801 has thermal protection and built-in soft-start circuitry. A high charge pump switching frequency enables the use of very small external capacitors. The AAT2801 is available in the 16-pin TDFN44 package.