PinoutSpecificationsUser Programmable Flash Duration VIN Range: 2.7V to 5.5V 600mA Output Current Tri-Mode 1X/1.5X/2X in Current Mode Voltage Mode Operation: 1.5X, 200mA Dual Regulated Current Sinks Current Match Between Current Sinks 32 Current Steps Set by AS2Cwire 1F Input, Output, and Flying C...
AAT3170: PinoutSpecificationsUser Programmable Flash Duration VIN Range: 2.7V to 5.5V 600mA Output Current Tri-Mode 1X/1.5X/2X in Current Mode Voltage Mode Operation: 1.5X, 200mA Dual Regulated Current Sinks...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The AAT3170 is a high output current, high efficiency, low noise, low profile charge pump DC/DC converter, ideal for multi-function LED photo-flash applications where solution cost, size, and efficiency are critical.
The dual charge pump in the AAT3170 is capable of delivering 600mA output current. Two current-controlled paths are available for users of dual flash LEDs that prefer current matching. Each LED channel can be easily programmed in 32 steps with a single GPIO output through the AS2Cwire?(Advanced Simple Serial Control? interface. This allows smooth transitions and flexible adjustment of brightness in flash or other lighting modes.
The tri-mode (1X/1.5X/2X) operation of the internal charge pump offers excellent power efficiency for both flash and movie modes. Combined with a low external parts count (two 1F flying capacitors and one small bypass capacitor at VIN and OUT), the AAT3170 is ideally suited for small, battery-powered applications.
The AAT3170 has a thermal management system to protect the device in the event of a short-circuit condition at the output pin. Built-in soft-start circuitry prevents excessive inrush current during start-up. The shutdown feature disconnects the load from VIN and reduces quiescent current to less than 1.0A.
The AAT3170 is available in the Pb-free, thermally enhanced, 12-pin 3x3mm TDFN package.