© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The IP4359CX4 is designed as one kind of dual channel low capacitance ElectroStatic Discharge (ESD) protection device that is optimized for protection of high speed interfaces such as Universal Serial Bus (USB) 2.0, High...
Vendor:Other Category:Other
The IP4358CX6 is designed as one kind of quad channel low capacitance ElectroStatic Discharge (ESD) protection device that is optimized for protection of high speed interfaces such as Universal Serial Bus (USB) 2.0, High...
Vendor:Other Category:Other
The IP4352CX24 is designed as one kind of 9-channel SD memory card interface filter device that integrates 9 pairs of rail-to-rail diodes, 15 resistors and 12 Zener diodes in a single Wafer-Level Chip-Scale Package (WLCS...
Vendor:Other Category:Other
The IP4350CX24 is designed as one kind of diode array device that can be used in (1)SD memory card interfaces in cellular and PCS mobile handsets; (2)Cordless telephones; (3)Digital still and video cameras; (4)Media play...
Vendor:Other Category:Other
The IP4338CX24LF is designed as one kind of 10-channel RC low-pass filter array device that can be used in (1)Cellular and Personal Communication System (PCS) mobile handsets; (2)Cordless telephones; (3)Wireless data (WA...
Vendor:Other Category:Other
The IP4337CX18/LF is designed as one kind of 7-channel RC low-pass filter array device that can be used in (1)Cellular and Personal Communication System (PCS) mobile handsets; (2)Cordless telephones; (3)Wireless data (WA...
Vendor:Other Category:Other
Vendor:Other Category:Other
The IP4286CZ6 is designed as one kind of integrated 4-channel ESD protection that is independent of the supply voltage due to the rail-to-rail diodes being connected to a Zener diode. Also this device is fabricated using...
Vendor:Other Category:Other
The IP4284CZ10-TB is designed as one kind of ESD protection for High-Definition Multimedia Interface interface device that includes high-level ElectroStatic Discharge (ESD) protection diodes for ultra high-speed signal l...
Vendor:Other Category:Other
The IP4283CZ10 is designed as one kind of ESD protection for HDMI interface device that includes high-level ElectroStatic Discharge (ESD) protection diodes for the TMDS signal lines. And this device can be used in (1)TVs...
Vendor:Other Category:Other
The IP4282CZ6 is designed as one kind of ESD protection for HDMI interface device that includes high-level ElectroStatic Discharge (ESD) protection diodes for the TMDS signal lines. And this device can be used in (1)TVs,...
Vendor:Other Category:Other
The IP4280CZ10 is designed as one kind of ESD protection for HDMI interface device that includes high-level ElectroStatic Discharge (ESD) protection diodes for the TMDS signal lines. And this device can be used in (1)TVs...
Vendor:Other Category:Other
The IP4264CZ8-20 is designed as one kind of 3-channel RC low-pass filter array device that is fabricated using monolithic silicon technology. And this device can be used in USIM and SIM interfaces in e.g. cellular and Pe...
Vendor:Other Category:Other
The IP4256CZ3-M is designed as one kind of single-channel low-pass filter device that is manufactured using monolithic silicon technology in lead-free plastic packages. And this device can be used in (1)Cellular phone an...
Vendor:Other Category:Other
The IP4253CZ8/CZ12/CZ16; IP4254CZ8/CZ12/CZ16 family consists of 4-, 6- and 8-channel RC low-pass filter arrays which are designed to provide filtering of undesired RF signals on the I/O ports of portable communication or...
Vendor:Other Category:Other
The IP4251CZ8-4 is designed as one kind of 4-channel RC low-pass filter array device that is fabricated using monolithic silicon technology and integrates up to 8 resistors and 16 diodes in a 0.4 mm pitch 8-, 12- or 16-p...
Vendor:Other Category:Other
The IP4234CZ6 is designed as one kind of single USB 2.0 ESD device that can be used in (1)Cellular and PCS mobile handsets; (2)PC/Notebook USB2.0/IEEE1394 ports; (3)DVI interfaces; (4)HDMI interfaces; (5)Cordless telepho...
Vendor:Other Category:Other
The IP4233CZ6 is designed as one kind of ultra low capacitance ESD device that can be used in ESD protection high-frequency AC-coupled Ethernet ports applications. And this device incorporates two pairs of ultra low capa...
Vendor:Other Category:Other
The IP4221CZ6-S is designed as one kind of dual USB 2.0 integrated quad device that can be used in wide range of applications such as (1)Cellular and PCS mobile handsets; (2)PC/notebook USB 2.0/IEEE 1394 ports; (3)DVI/HD...
Mfg:PHILIPS Pack:SOT457 Vendor:Other Category:Other
The IP4220CZ6 is designed to protect I/Os being sensitive concerning capacitive load, such as USB 2.0, Ethernet, DVI etc. from destruction by Electro Static Discharges (ESD).Therefore, the IP4220CZ6 incorporates four pai...
Vendor:Other Category:Other
The IP4064CX8LF are 3-channel RC low-pass filter arrays which are designed to provide filtering of undesired RF signals in the 800 MHz to 3000 MHz frequency band. In addition, the IP4064CX8/LF and IP4364CX8/LF incorporat...
Vendor:Other Category:Other
The IP4064CX8/LF is designed as one kind of 3-channel RC low-pass filter array device that can be use in applications requiring the utmost in miniaturization such as mobile phone handsets, cordless telephones and persona...
Mfg:NXP Pack:WL-CSP D/C:06+ Vendor:Other Category:Other
The IP4064CX8/LF and IP4364CX8/LF are 3-channel RC low-pass filter arrays which are designed to provide filtering of undesired RF signals in the 800 MHz to 3000 MHz frequency band. In addition, the IP4064CX8/LF and IP436...
Vendor:Other Category:Other
The IP4060CX16LF is designed as one kind of high-speed MultiMediaCard interface filter device that is fabricated using monolithic silicon semiconductor technology integrating 6 resistors and 13 pseudo back-to-back diodes...
Vendor:Other Category:Other
The IP4041CX25 is designed as one kind of 10-channel RC low-pass filter device that is fabricated using monolithic silicon technology and integrates 10 resistors and 20 diodes in a single Wafer-Level Chip-Scale Package (...
Vendor:Other Category:Other
The IP4035CX24 is designed as one kind of 10-channel RC low-pass filter device that is fabricated using monolithic silicon technology and integrates 10 resistors and 20 diodes in a single Wafer-Level Chip-Scale Package (...
Mfg:HYNIX Pack:SOP-7.2-28P D/C:6+ Vendor:Other Category:Other
The IP4011 is a monolithic integrated circuit, and suitable for 5-ch motor driver which drives focus actuator, tracking actuator, sled motor, spindle motor and Tray motor of CDP & V-CD system.
Mfg:IP Pack:SOP28 D/C:00+ Vendor:Other Category:Other
The IP4001S is a monolithic integrated circuit, and suitable for 5-ch motor driver which drives focus actuator, tracking actuator, sled motor, spindle motor and tray motor of CDP & V-CD system .Each channel excluding...
Mfg:INP Pack:SOP-14 D/C:02+ Vendor:Other Category:Other
The IP4001 is a monolithic integrated circuit, andb suitable for 5-ch motor driver which drives focus actuator, tracking actuator, sled motor, spindle motor and Tray motor of CDP & V-CD system.
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The IP3R07A series of low dropout adjustable voltage regulators are capable of supplying 3A of output current with an input-to-output voltage of just 0.8V. In applications where high efficiency is necessary it is now pos...
Vendor:Other Category:Other
The IP3R07A series of low dropout adjustable voltage regulators are capable of supplying 3A of output current with an input-to-output voltage of just 0.8V. In applications where high efficiency is necessary it is now pos...
Vendor:Other Category:Other
The IP3P125 series of pulse width modulator intergrated circuits offers high speed performance optimized for MOSFET drive. Pin compatible with SG1525A, the IP3P125 features low crossover current through the output transi...
Vendor:Other Category:Other
Vendor:Other Category:Other
The IP35063 series of control circuits contains all the bfunctions required to implement DCDC converters. Included are internal voltage reference, comparator, controlled duty cycle oscillator with current limit circuit, ...
Vendor:Other Category:Other
Vendor:Other Category:Other
The IP34063 series of control circuits contains all the bfunctions required to implement DCDC converters. Included are internal voltage reference, comparator, controlled duty cycle oscillator with current limit circuit, ...
Vendor:Other Category:Other
Mfg:SML Pack:TO-3 D/C:00+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The IP3348CX5 is designed as one kind of 2-channel LC low-pass filter device that can provides filtering of undesired RF signals in the 800 MHz to 3 GHz frequency band while supporting data rates up to 400 Mbit/s. And th...
Vendor:Other Category:Other
The IP33063 series of control circuits contains all the bfunctions required to implement DCDC converters. Included are internal voltage reference, comparator, controlled duty cycle oscillator with current limit circuit, ...
Vendor:Other Category:Other
The IP3253 is designed as one kind of integrated 4-, 6- and 8-channel passive EMI-filter device that is fabricated using monolithic silicon technology integrating up to 8 inductors and 16 diodes in a 0.4 mm pitch 8-, 12-...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:HYNIX Pack:DIP-8P D/C:02+ Vendor:Other Category:Other
The IP3101 provides simple and high performance control functions for the half bridge L/C resonant system,specially electronic ballast . It internally integrated the essential functions of the half bridge L/C resonant sy...
Vendor:Other Category:Other
IP3088CX5, IP3088CX10, IP3088CX15 and IP3088CX20 is a 2, 4, 6 and 8-channel LC low-pass filter array family which is designed to provide filtering of undesired RF signals on the I/O ports of portable communication or com...
Vendor:Other Category:Other
The IP3048CX5 is a low-ohmic, dual channel LC low-pass filter array which is designed to provide filtering of undesired RF signals. In addition, IP3048CX5 incorporates diodes to provide protection to downstream component...
Vendor:Other Category:Other
Vendor:Other Category:Other
It is adaptable to a discontinuous mode of operation that the IP3002 is PFC (Power Factor Correction) controller for the high density switching mode power supply and electronic ballast systems. The bulky external compone...
Mfg:UBICOM Pack:N/A D/C:09+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:International Rectifier Category:Integrated Circuits (ICs)
IC PWR BLOCK SYNC BUCK 40A LGAThe iP2004 is a fully optimized solution for high current synchronous buck multiphase applications. Board space and design time are greatly reduced because most of the components required for each phase of a typical disc...
Vendor:International Rectifier Category:Integrated Circuits (ICs)
IC PWR BLOCK SYNC MULTIPH LGA The iP2003APbF is a fully optimized solution for high current synchronous buck multiphase applications.Board space and design time are greatly reduced because most of the components required for each phase of a typ...
Vendor:International Rectifier Category:Integrated Circuits (ICs)
IC BLOCK PWR MULTIPHASE 40A LGAThe iP2003A is a fully optimized solution for high current synchronous buck multiphase applications.Board space and design time are greatly reduced because most of the components required for each phase of a typical disc...
Mfg:IOR Pack:BGA D/C:04+ Vendor:International Rectifier Category:Integrated Circuits (ICs)
IC BLOCK PWR MULTIPHASE 40A LGA
Vendor:International Rectifier Category:Integrated Circuits (ICs)
IC BLOCK PWR MULTIPH 30A 144-BGA The iP2001PbF is a fully optimized solution for high current synchronous buck multiphase applications. Board space and design time are greatly reduced because most of the components requried for each phase of a ty...
Vendor:International Rectifier Category:Integrated Circuits (ICs)
IC BLOCK PWR MULTIPH 30A 144BGAThe iP2002 is a fully optimized solution for high current synchronous buck multiphase applications. Board space and design time are greatly reduced because most of the components required for each phase of a typical disc...
Vendor:International Rectifier Category:Integrated Circuits (ICs)
IC PWR BLOCK SYNC MULTIPH 144BGA The iP2001PbF is a fully optimized solution for high current synchronous buck multiphase applications. Board space and design time are greatly reduced because most of the components requried for each phase of a ty...
Vendor:International Rectifier Category:Integrated Circuits (ICs)
IC PWR BLOCK MULTIPH 20A 144BGAThe iP2001 is a fully optimized solution for high current synchronous buck multiphase applications.Board space and design time are greatly reduced because most of the components required for each phase of a typical discr...
Vendor:Other Category:Other
The IP200 interpolation circuit is designed for connection to incremental position and angle measuring systems with sine-shaped output signals with a 90° phase shift. It can be operated at a large number of transducer sy...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The IP1R07A series of low dropout adjustable voltage regulators are capable of supplying 3A of output current with an input-to-output voltage of just 0.8V. In applications where high efficiency is necessary it is now pos...
Vendor:Other Category:Other
The IP1R07 series of low dropout adjustable voltage regulators are capable of supplying 3A of output current with an input-to-output voltage of just 0.8V. In applications where high efficiency is necessary it is now poss...
Vendor:Other Category:Other
The IP1P125 series of pulse width modulator intergrated circuits offers high speed performance optimized for MOSFET drive. Pin compatible with SG1525A, the IP1P125 features low crossover current through the output transi...
Vendor:Other Category:Other
The IP1M10 and IP1M12 series each contain two full H-bridge power drivers capable of delivering 200 mA continuous output current per channel (100mA for 1Mxx / 2Mxx). Each bridge may be run from its own supply voltage of ...
Vendor:Other Category:Other
The IP1M10 and IP1M12 series each contain two full H-bridge power drivers capable of delivering 200 mA continuous output current per channel (100mA for 1Mxx / 2Mxx). Each bridge may be run from its own supply voltage of ...
Vendor:Other Category:Other
The IP1844A/IP1845A series of switching regulator control circuits contain all the functions necessary to implement off-line, current mode switching regulators, using a minimum number of external parts. Functions include...
Vendor:Other Category:Other
The IP1844 and IP1845 series of switching regulator control circuits contain all the functions necessary to implement off-line, current mode switching regulators, using a minimum number of external parts.Functions includ...
Vendor:Other Category:Other
The IP1844A/IP1845A series of switching regulator control circuits contain all the functions necessary to implement off-line, current mode switching regulators, using a minimum number of external parts. Functions include...
Vendor:Other Category:Other
The IP1844 and IP1845 series of switching regulator control circuits contain all the functions necessary to implement off-line, current mode switching regulators, using a minimum number of external parts.Functions includ...
Vendor:Other Category:Other
The IP1842A/IP1843A series of switching regulator control circuits contain all the functions necessary to implement off-line, current mode switching regulators, using a minimum number of external parts. Functions include...
Vendor:Other Category:Other
The IP1843 series of switching regulator control circuits contain all the functions necessary to implement offline, current mode switching regulators, using a minimum number of external parts. Functions included are volt...
Vendor:Other Category:Other
The IP1842A series of switching regulator control circuits contain all the functions necessary to implement off-line, current mode switching regulators, using a minimum number of external parts. Functions included are vo...
Vendor:Other Category:Other
The IP1842 and IP1843 series of switching regulator control circuits contain all the functions necessary to implement offline, current mode switching regulators, using a minimum number of external parts. Functions includ...
Mfg:IC+ Pack:QFP D/C:06+ Vendor:Other Category:Other
IP178CLF integrates a 9-port switch controller, SSRAM, and 8 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The transceivers are designed in...
Vendor:Other Category:Other
IP178CHLF integrates a 9-port switch controller, SSRAM, and 8 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The transceivers are designed i...
Vendor:Other Category:Other
IP178C/IP178CH integrates a 9-port switch controller, SSRAM, and 8 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The transceivers are desig...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
IP178C integrates a 9-port switch controller,SSRAM, and 8 10/100 Ethernet transceivers.Each of the transceivers complies with theIEEE802.3, IEEE802.3u, and IEEE802.3xspecifications. The transceivers are designed inDSP ap...
Vendor:Other Category:Other
IP178A is an 8 port 10/100 Ethernet integrated switch. It consists of an 8-port switch controller and eight Fast Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x spe...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
IP175CLF integrates a 6-port switch controller, SSRAM, and 5 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The DSP approach is utilizedfor ...
Mfg:IC+ Pack:06+ D/C:660/ Vendor:Other Category:Other
IP175C/IP175CH integrates a 6-port switch controller, SSRAM, and 5 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The DSP approach is utiliz...
Mfg:N/A Pack:QFP D/C:06+ Vendor:Other Category:Other
IP175C/IP175CH integrates a 6-port switch controller, SSRAM, and 5 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The DSP approach is utiliz...
Vendor:Other Category:Other
IP175ALF is a low cost 10/100 Ethernet single chip switch. It integrates a 5-port switch controller, SSRAM, and 5 10/100 Ethernet transceivers.Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802...
Mfg:IC+ Pack:QFP Vendor:Other Category:Other
IP175 is a 5 port 10/100 Ethernet integrated switch. It consists of a 5-port switch controller and five Fast Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifi...
Vendor:Other Category:Other
Supporting 24-port SS-SMII, 2-port MII and various advanced features, the IP1726LF fits both the office switch and the ETTH( Ethernet to the Home) application. The IP1726 LF embeds internal SSRAM for the use of the packe...
Vendor:Other Category:Other
Supporting 16-port SS-SMII, 2-port MII andvarious advanced features, the IP1718 LF fitsboththe office switch and the ETTH( Ethernet to theHome) application. The IP1718 LF embedsinternal SSRAM for the use of the packet bu...
Vendor:Other Category:Other
The IP1622 is an integrated circuit that has triple LDO regulators and one reset circuit. All the LDO regulators have their own internal npn power transistors and their nominal output voltages are 1.65V and 3.4V, respect...
Vendor:Other Category:Other
The IP1621 is an integrated circuit that has triple LDO regulators and one reset circuit. All the LDO regulators have their own internal npn power transistors and their nominal output voltages are 2.67V and 3.4V, respect...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.