Features: - 1-Fixed 3.4V LDO regulator with internal NPN TR.- 1-Fixed 1.65V LDO regulator with internal NPN TR.- Typical reset detection voltage of 4.2V.- Built-in TSD circuit.- Built-in current limit circuit.- Built-in over voltage protection circuit.- Output trimmed to +/-3% tolerance.PinoutSpec...
IP1622: Features: - 1-Fixed 3.4V LDO regulator with internal NPN TR.- 1-Fixed 1.65V LDO regulator with internal NPN TR.- Typical reset detection voltage of 4.2V.- Built-in TSD circuit.- Built-in current lim...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter |
Symbol |
Rating |
Unit |
Maximum supply voltage |
Vccmax |
10 |
V |
Input voltage |
Vinmax |
10 |
V |
Power dissipation |
Pd |
3.0* |
W |
Operating temperature |
Topr |
-35 ~ +85 |
|
Operating temperature |
Tstr |
-55 ~ +150 |
|
Maximum output limit current |
Io_limit |
900 |
mA |
The IP1622 is an integrated circuit that has triple LDO regulators and one reset circuit. All the LDO regulators have their own internal npn power transistors and their nominal output voltages are 1.65V and 3.4V, respectively.The reset circuit monitors the status of the regulator input voltage and outputs the RESET signal. RESET becomes high after the delay time that is determined by the external capacitor at Td pin. The delay time begins to start after the input voltage reaches above 4.2V.