About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index I : IMP813L,IMP813,IMD8A,
IMP813L
Pack:DIP D/C:09+ Vendor:Other Category:Other
The IMP705/706/707/708 and IMP813L CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. Compared to pin-compatible devices offered by Maxim Integrated Products, IMP de...IMP813
Vendor:Other Category:Other
The IMP813 is designed as the CMOS supervisor circuits monitor that generates a reset signal during power-up, power-down and during brownout conditio-ns. This device can be used in (1)computers and embedded controllers; ...IMP812
Mfg:IMP Pack:SOT23 D/C:05+ Vendor:Other Category:Other
The IMP811/IMP812 are low-power supervisors designed to monitor voltage levels of 3.0V, 3.3V and 5.0V power supplies in low-power microprocessor (µP), microcontroller (µC) and digital systems. Each features a...IMP811
Vendor:Other Category:Other
The IMP811/IMP812 are low-power supervisors designed to monitor voltage levels of 3.0V, 3.3V and 5.0V power supplies in low-power microprocessor (µP), microcontroller (µC) and digital systems. Each features a...IMP810
Vendor:Other Category:Other
The IMP810 is designed as one kind of 3.0V, 3.3V and 5.0V power supply supervisor that is optimized for low-power microprocessor (P), microcontroller (C) and digital systems. This device can be used in (1)embedded contro...IMP809
Vendor:Other Category:Other
The IMP809/IMP810 are 3.0V, 3.3V and 5.0V power supply supervisor circuits optimized for low-power microprocessor (µP), microcontroller (µC) and digital systems. The IMP809/810 are improved drop-in replacemen...IMP805L
Vendor:Other Category:Other
The IMP690A/IMP692A/IMP802L/IMP802M/IMP805L simplify power supply monitoring and control in microprocessor systems. Each circuit implements four functions: Reset control, watchdog monitoring, batterybackup switching and ...IMP803IMA/T
Vendor:Other Category:Other
The IMP803IMA/T is one member of the IMP803 family which is designed as the Electroluminescent (EL) lamp driver with the four EL lamp driving functions on-chip that can be used in (1)GPS units/Pagers/Cellular phones; (2)...IMP803
Mfg:73 Pack:IMP D/C:TSOP8 Vendor:Other Category:Other
The IMP803 is an Electroluminescent (EL) lamp driver with the four EL lamp driving functions on-chip. These are the switch-mode power supply, its high-frequency oscillator, the high-voltage H-bridge lamp driver and its l...IMP802M
Vendor:Other Category:Other
The IMP690A/IMP692A/IMP802L/IMP802M/IMP805L simplify power supply monitoring and control in microprocessor systems. Each circuit implements four functions: Reset control, watchdog monitoring, batterybackup switching and ...IMP802L
Vendor:Other Category:Other
The IMP690A/IMP692A/IMP802L/IMP802M/IMP805L simplify power supply monitoring and control in microprocessor systems. Each circuit implements four functions: Reset control, watchdog monitoring, batterybackup switching and ...IMP708T
Vendor:Other Category:Other
The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R),...IMP708S
Vendor:Other Category:Other
The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R),...IMP708R
Vendor:Other Category:Other
The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R),...IMP708J
Vendor:Other Category:Other
The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R),...IMP708
Vendor:Other Category:Other
The IMP705/706/707/708 and IMP813L CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. Compared to pin-compatible devices offered by Maxim Integrated Products, IMP de...IMP707
D/C:0136+ Vendor:Other Category:Other
The IMP705/706/707/708 and IMP813L CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. Compared to pin-compatible devices offered by Maxim Integrated Products, IMP de...IMP706T
Vendor:Other Category:Other
The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R),...IMP706S
Mfg:IMP Pack:SOP D/C:04+ Vendor:Other Category:Other
The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R),...IMP706R
Mfg:IMP Pack:SOP-8 D/C:07+ Vendor:Other Category:Other
The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R),...IMP706P
Mfg:IMP D/C:08+ Vendor:Other Category:Other
The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R),...IMP706J
Vendor:Other Category:Other
The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R),...IMP706CPA
Vendor:Other Category:Other
The IMP706CPA is one member of the IMP706 family which is designed as the supervisor circuit that generates a reset signal during power-up, power-down and during brownout conditions. So this device can be used in (1)comp...IMP706
Vendor:Other Category:Other
The IMP705/706/707/708 and IMP813L CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. Compared to pin-compatible devices offered by Maxim Integrated Products, IMP de...IMP705
Mfg:IMP Pack:DIP8 D/C:04+ Vendor:Other Category:Other
The IMP705/706/707/708 and IMP813L CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. Compared to pin-compatible devices offered by Maxim Integrated Products, IMP de...IMP692A
Vendor:Other Category:Other
The IMP690A/IMP692A/IMP802L/IMP802M/IMP805L simplify power supply monitoring and control in microprocessor systems. Each circuit implements four functions: Reset control, watchdog monitoring, batterybackup switching and ...IMP690A
Vendor:Other Category:Other
The IMP690A/IMP692A/IMP802L/IMP802M/IMP805L simplify power supply monitoring and control in microprocessor systems. Each circuit implements four functions: Reset control, watchdog monitoring, batterybackup switching and ...IMP6303
Vendor:Other Category:Other
The IMP6303 is a 4.0V power supply supervisor circuits optimized for lowpower microprocessor (µP), microcontroller (µC) and digital systems.A reset signal of IMP6303 is issued if the power supply voltage drop...IMP560ESA/T
Vendor:Other Category:Other
The IMP560ESA/T is one member of the IMP560 family which is designed as the Electroluminescent (EL) lamp driver that can be used in (1)night lights; (2)automotive displays; (3)cellular phones; (4)pagers; (5)clocks and ra...IMP560
Mfg:imp D/C:6520 Vendor:Other Category:Other
The IMP560 is an Electroluminescent (EL) lamp driver designed for systems with low EL lamp drive voltage requirements. It is ideal for low ambient light applications or where small lamps are used. With just onehalf the i...IMP528ESA
Vendor:Other Category:Other
The IMP528ESA is one member of the IMP528 family which is designed as the hiigh-vollttage Electroluminescent (EL) lamp driiver that can be used in (1)GPS units/pagers/cellular phones; (2)PDAs/Handheld computers; (3)safet...IMP528
Mfg:IMP Pack:SOP-8 D/C:03+ Vendor:Other Category:Other
The IMP528 is an Electroluminescent (EL) lamp driver with the four EL lamp driving functions on-chip. These are the switch-mode power supply, its high-frequency oscillator, the high-voltage H-bridge lamp driver and its l...IMP525
Pack:SOP8 Vendor:Other Category:Other
The IMP525 is an Electroluminescent (EL) lamp driver designed for systems that must operate below 1 volt. The input supply voltage range is 0.9V to 2.5V. Typical output lamp drive voltage is 112V. All four EL lampdriving...IMP5246
Vendor:Other Category:Other
The IMP5245/5246 ICs are Low Voltage Differential (LVD) terminators designed to comply with the LVD termination specification in the SPI-2 document. The IMP5245/5246 are designed specifically for LVD applications.Because...IMP5245
Vendor:Other Category:Other
The IMP5245/5246 ICs are Low Voltage Differential (LVD) terminators designed to comply with the LVD termination specification in the SPI-2 document. The IMP5245/5246 are designed specifically for LVD applications.Because...IMP5242
Vendor:Other Category:Other
The IMP5241/42 is a multimode SCSI terminator that conforms to the SCSI Parallel Interconnect- 2 (SPI-2) specification developed by the T10 standards committee for low voltage differential (LVD) termination, while provid...IMP5241
Vendor:Other Category:Other
The IMP5241/42 is a multimode SCSI terminator that conforms to the SCSI Parallel Interconnect- 2 (SPI-2) specification developed by the T10 standards committee for low voltage differential (LVD) termination, while provid...IMP5226
Mfg:IMP Pack:SOP28 D/C:N/A Vendor:Other Category:Other
The IMP5226 SCSI terminator is part of IMP's family of high-performance, adaptive, non-linear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The low-voltage BiCMOS arch...IMP5225
Vendor:Other Category:Other
The IMP5225 SCSI terminator is part of IMP's family of high-performance, adaptive, non-linear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The low voltage BiCMOS arch...IMP52216
Vendor:Other Category:Other
The 18-channel IMP5226 SCSI terminator is part of IMP's family of highperformance SCSI terminators that deliver true UltraSCSI performance.The BiCMOS design offers superior performance over first generation linear regula...IMP522
Mfg:IMP Pack:TSOP-8 D/C:2005+ Vendor:Other Category:Other
The IMP522 is a dual-output, high-voltage electroluminescent (EL) lamp driver. Either or both EL lamp driver outputs can be turned ON with the LMPSEL select pin. One EL lamp of IMP522 is connected between VA and VAB and ...IMP5219
Pack:SOP Vendor:Other Category:Other
The IMP5219 SCSI terminator is part of IMP's SCSI terminator family of high-performance, adaptive, non-linear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The low vol...IMP5218
Vendor:Other Category:Other
The IMP5218 terminator is part of IMP's SCSI terminator family of high-performance, adaptive, non-linear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The low voltage ...IMP52
Vendor:Other Category:Other
The IMP527 is an Electroluminescent (EL) lamp driver designed for systems that must operate down to 1 volt and below. The input supply voltage range OF IMP52 is 0.9V to 2.5V. Typical output lamp drive voltage is 180V. Al...IMP5121
Vendor:Other Category:Other
The IMP5121 Plug and Play terminator represents next-generation technology for SCSI termination applications. The low-voltage BiCMOS architecture mployed in its design offers performance superior to older passive and ac...IMP5115
Mfg:IMP Pack:SOP16 D/C:04+05+ Vendor:Other Category:Other
The IMP5115 SCSI terminator is part of IMP's family of high-performance, adaptive, non-linear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The low voltage BiCMOS arch...IMP5112
Vendor:Other Category:Other
The IMP5111/5112 SCSI terminators are part of IMP's SCSI terminator family of high-performance, adaptive, non-linear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The ...IMP5111
Vendor:Other Category:Other
The IMP5111/5112 SCSI terminators are part of IMP's SCSI terminator family of high-performance, adaptive, non-linear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The ...IMP49P504
Vendor:Other Category:Other
The IMP49P504 has the following features including 4 channels;70MHz BW;MIR element biasing;Curent bias¤t sense scheme;Single-ended input, differential output;Resistor programmable MR bias current;MR voltage cla...IMP38HC4x
Vendor:Other Category:Other
The IMP38C4x and IMP38HC4x are fixed frequency, high performance, current-mode PWM controllers that are pin compatible with bipolar 384x devices but feature improvements resulting from IMP's BiCMOS processing and circuit...IMP38HC42ESA
Vendor:Other Category:Other
The IMP38HC42ESA is one member of the IMP38 family which is designed as the fixed frequency, high performance, current-mode PWM controller that are pin compatible with bipolar 384x devices but feature improvements result...IMP38C4x
Vendor:Other Category:Other
The IMP38C4x and IMP38HC4x are fixed frequency, high performance, current-mode PWM controllers that are pin compatible with bipolar 384x devices but feature improvements resulting from IMP's BiCMOS processing and circuit...IMP37
Vendor:Other Category:Other
The IMP37 series of Low Dropout (LDO) three-terminal voltage regulators feature guaranteed low dropout voltages at currents up to 0.8A. The IMP37 regulator family dropout voltage is guaranteed to be 0.95V or lower at 0.8...IMP2527
Vendor:Other Category:Other
The IMP2524 and IMP2527 are complete power management solutions for bus-powered and self-powered USB hubs. Each device contains four independent power switches and fault detection logic. The IMP2524 channel resistance is...IMP2525
Vendor:Other Category:Other
The IMP2525 high-side power switch IC is designed for self-powered and bus-powered Universal Serial Bus (USB) power supply and power management applications. The IMP2525 conforms to USB standards with a low output switch...IMP2524
Mfg:IMP Pack:16-pin, SO D/C:08+ Vendor:Other Category:Other
The IMP2524 and IMP2527 are complete power management solutions for bus-powered and self-powered USB hubs. Each device contains four independent power switches and fault detection logic. The IMP2524 channel resistance is...IMP2185
Vendor:Other Category:Other
The IMP2185 is designed as one kind of high performance CMOS low dropout voltage regulator that offers superior dropout voltage performance and load regulation characteristics as compared to the pin compatible devices of...IMP2119
Vendor:Other Category:Other
The IMP2119 is a multimode SCSI terminator that conforms to the SCSI Parallel Interconnect-2 (SPI-2) specification developed by the T10 standards committee for low voltage differential (LVD) termination.Multimode compati...IMP1834D
Mfg:IMP D/C:08+ Vendor:Other Category:Other
The IMP1834 supervisors simultaneously monitor both 3.3V and 5V power sources and issue reset signals when either supply is out of tolerance. When an out-of-tolerance condition is detected, the output-reset signal of the...IMP1834A
Mfg:IMP D/C:08+ Vendor:Other Category:Other
The IMP1834 supervisors simultaneously monitor both 3.3V and 5V power sources and issue reset signals when either supply is out of tolerance. When an out-of-tolerance condition is detected, the output-reset signal of the...IMP1834
Mfg:IMP D/C:08+ Vendor:Other Category:Other
The IMP1834 supervisors simultaneously monitor both 3.3V and 5V power sources and issue reset signals when either supply is out of tolerance. When an out-of-tolerance condition is detected, the output-reset signal of the...IMP16C554
Mfg:TI Pack:2500 Vendor:Other Category:Other
The IMP16C554 is a universal asynchronous receiver and transmitter with 16 byte transmit and receive FIFO. A programmable baud rate generator is provided to select transmit and receive clock rates from 50Hz to 1.5MHz. Th...IMP16C550A
Vendor:Other Category:Other
The IMP16C550A UART (universal asynchronous receiver/transmitter) provides data communications capabilities for microprocessor-based systems including polled and interrupt driven environments. IMP16C550A converts data ch...IMP16C522
Vendor:Other Category:Other
The low power COMS IMP16C522 is a single device solution for serving two serial input/output ports simultaneously and one fully bi-directional parallel port for the IBM PC ATM PS/2 and compatible systems. The parallel po...IMP1233M
Vendor:Other Category:Other
The IMP1233M supply voltage monitor is an improved, low-power replacement for the Dallas Semiconductor DS1233M. Maximum supply current over temperature is a low 20µA, representing 60 percent lower power as compared...IMP1233D
Vendor:Other Category:Other
The IMP1233D supply voltage monitor is an improved, low-power replacement for the Dallas Semiconductor DS1233D. Maximum supply current over temperature is a low 20µA, representing over 60 percent lower power as com...IMP1232LPS
Mfg:14 Pack:IMP Vendor:Other Category:Other
The IMP1232LP/LPS microprocessor supervisor IMP1232LPS can halt and restart a "hung-up" or "stalled" microprocessor, restart a microprocessor after a power failure, and debounce and interface a manual push-button micropr...IMP1232LP
Mfg:IMP Pack:DIP/SOP D/C:08+ Vendor:Other Category:Other
The IMP1232LP/LPS microprocessor supervisor can halt and restart a "hung-up" or "stalled" microprocessor, restart a microprocessor after a power failure, and debounce and interface a manual push-button microprocessor res...IMP1117
Vendor:Other Category:Other
The IMP1117 has six key features.The first one is low dropout voltage.The second one is load regulation:0.05% typical.The third one is optimized for low voltage.The fourth one is on-chip thermal limiting.The fifth one is...IMP11
Mfg:ROHM Pack:SOT-163 Vendor:Other Category:Other
IMN11
Vendor:Other Category:Other
IMN10
Mfg:ROHM Vendor:Other Category:Other
IMISG509
Vendor:Other Category:Other
The IMISG509 is a spectrum spread clock generator specially designed for personal computers, laser printers and other digital systems. IMISG509 uses a patented concept to generate popular clock frequencies that are inten...IMHH8GP22A1F2C-13H
Vendor:Other Category:Other
IMHH8GP22A1F2C-10F
Vendor:Other Category:Other
IMHH4GP23A1F1C-13H
Vendor:Other Category:Other
IMHH4GP23A1F1C-10F
Vendor:Other Category:Other
IMHH4GP12A1F1C-13H
Vendor:Other Category:Other
IMHH4GP12A1F1C-10F
Vendor:Other Category:Other
IMH9A
Mfg:Rohm Pack:Sot-163 D/C:N/A Vendor:Other Category:Other
IMH7A
Vendor:Other Category:Other
IMH6A
Mfg:Rohm Pack:Sot-163 D/C:09+ Vendor:Other Category:Other
IMH5A
Mfg:ROHM Pack:2004 Vendor:Other Category:Other
IMH3A
Mfg:ROHM D/C:3000 Vendor:Other Category:Other
IMH2A
Mfg:ROHM Pack:SOT163 D/C:2008+ Vendor:Other Category:Other
IMH24
Vendor:Other Category:Other
IMH23
Vendor:Other Category:Other
IMH22
Vendor:Other Category:Other
IMH21
Mfg:ROHM Pack:SOT-163 D/C:05+ Vendor:Other Category:Other
IMH20TR1G
Mfg:ON D/C:06+ Vendor:ON Semiconductor Category:Discrete Semiconductor Products
TRANS NPN DUAL BIAS 500MA SC74-6IMH20T1G
Vendor:Other Category:Other
IMH20
Mfg:ROHM Pack:SOT-163 Vendor:Other Category:Other
IMH1A
Mfg:ROHM Pack:08+ D/C:30000 Vendor:Other Category:Other
IMH15A
Mfg:ROHM Pack:SOT-163 Vendor:Other Category:Other
IMH14A
Mfg:ROHM D/C:08+ Vendor:Other Category:Other
IMH11A
Mfg:N/A Pack:N/A D/C:09+ Vendor:Other Category:Other
IMH10A
Mfg:ROHM Pack:SOT23-6 D/C:N/A Vendor:Other Category:Other
IME6400
Mfg:INTIME Pack:QFP Vendor:Other Category:Other
The IME6400 is a single chip MPEG4/2/1 encoder for audio, video, system. The IME6400 encodes audio/video, multiplex audio and video, and creates MPEG4/2/1 elementary, program and transport streams. The IME6400 is compose...IMD9A
Mfg:Rohm Pack:Sot-163 D/C:09+ Vendor:Other Category:Other
IMD8A
Mfg:ROHM Pack:SOT-163 D/C:05+PB Vendor:Other Category:Other