Features: ·IP175A PCB compatible (pins compatible)·Built in 6 MAC and 5 PHY·Each port can be configured to be 10Base-T, 100Base-TX·2k MAC address·384k bits packet buffer memory·Support auto-polarity for 10Mbps·Filter/ forward reserved address option·Broadcast storm protection·Auto MDI-MDIX·Support...
IP175C: Features: ·IP175A PCB compatible (pins compatible)·Built in 6 MAC and 5 PHY·Each port can be configured to be 10Base-T, 100Base-TX·2k MAC address·384k bits packet buffer memory·Support auto-polarity...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
IP175C/IP175CH integrates a 6-port switch controller, SSRAM, and 5 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The DSP approach is utilizedfor designing transceivers with 0.18um technology; they have high noise immunity and robust performance.
IP175C/IP175CH operates in store and forward mode. It supports flow control, auto MDI/MDI-X, CoS, port base VLAN, bandwidth control, DiffServ, SMART MAC and LED functions, etc. Eachport can be configured to auto-negotiation or forced 10M/100M, full/half duplexmode. Using an EEPROM or pull up/down resistors on specified pins can configure the desired options.
Besides a 5-port switch application, IP175C/IP175CH supports three MII/RMII ports for router application, which supports 4 LAN ports, one WAN port and one HOME/PNA or Access point. The external MAC can monitor or configure IP175C/IP175CH by accessing MII registers through SMI0.
MII/RMII port also can be configured to be MAC mode. It is used to interface an external PHY to work as a 5+1 switch. Through SMI1 IP175C/IP175CH can monitor and configure external PHY.