© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The ANADIGICS WEDGE module provides the power needed for advanced 3G handsets, smartphones, and data devices. The WEDGE module supports GSM type dual, tri, and quad band applications for GMSK and 8-PSK modulation schemes...
Vendor:Other Category:Other
The AWT6222 addresses the demand for increased integration in dual-band handsets for cellular network deployments. The small footprint 3 mm x 5 mm x 1 mm surface mount RoHS compliant package contains independent RF PA pa...
Vendor:Other Category:Other
The AWT6221R addresses the demand for increased integration in dual-band handsets for Cingular's North American WCDMA network deployments. The small footprint 3 mm x 5 mm x 1 mm surface mount RoHS compliant package conta...
Vendor:Other Category:Other
AWT6201,the module requires only the most basic RF decoupling, all the RF ports are 50 ohms, and the interfaces directly with the baseband power control DAC and supports both 1.8 V and 2.7 V logic. The solution includes ...
Vendor:Other Category:Other
This quad band power amplifier module AWT6172 supports dual, tri and quad band applications for both GMSK and 8-PSK modulation schemes. There are two amplifier chains, one to support GSM850/900 bands, the other for DCS/P...
Vendor:Other Category:Other
This power amplifier module AWT6155 supports dual, tri and quad band applications for GMSK and 8-PSK modulation schemes using a polar architecture. There are two amplifier chains, one to support GSM850/900 bands, the oth...
Mfg:964 Pack:ANADIGCS Vendor:Other Category:Other
The AWT6137 CDMA/AMPS Power Amplifier is a high performance CDMA2000/ 1XRTT amplifier designed specifically for Cellular wireless applications. This rugged, easy to use InGaP HBT design delivers state of the art efficien...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The AWT6136 is a high power, high efficiency amplifier module for CDMA wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature...
Mfg:883 Pack:ANADIGCS Vendor:Other Category:Other
The AWT6135 meets the increasing demands for higher efficiency and linearity in CDMA 1XRTT handsets. The PA module is optimized for VREF = +2.8 V,a requirement for compatibility with the Qualcomm® 6000 chipset. The d...
Mfg:90 Pack:ANADIGCS Vendor:Other Category:Other
The AWT6134 meets the increasing demands for higher efficiency and linearity in CDMA 1XRTT handsets. The PA module is optimized for VREF = +2.8 V,a requirement for compatibility with the Qualcomm 6000 chipset. The device...
Vendor:Other Category:Other
The AWT6132R is a high power, high efficiency amplifier module for CDMA wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperatur...
Mfg:ANADIGIC Pack:LLP10 D/C:05+ Vendor:Other Category:Other
The AWT6114 is a high power, high efficiency amplifier module for Korean Band PCS CDMA wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliabil...
Mfg:86 Pack:ANADIGCS Vendor:Other Category:Other
The AWT6113 is a high power, high efficiency amplifier module for PCS/CDMA wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, tempera...
Pack:QFN Vendor:Other Category:Other
The AWT6112 is a high power, high efficiency amplifier module for dual mode AMPS/CDMA wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliabili...
Mfg:ANADIGIC Pack:BGA D/C:00+ Vendor:Other Category:Other
The AWT6111 is a hetero-junction bipolar transistor (HBT) amplifier designed for the CDMA cellular handset. The frequency band of operation is 824-849 MHz. The AWT6111 is designed to operate from a single lithium-ion (Li...
Mfg:AWT Pack:QFN D/C:02+ Vendor:Other Category:Other
The AWT6109 is a 3.5 V (3.0 V to 4.2 V) high efficiency, 3 stage amplifier module for Korean Band PCS handsets. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, t...
Mfg:ANADIGIC Pack:QFN D/C:03+ Vendor:Other Category:Other
The AWT6106 is a 3.5 V (3.0 V to 4.2 V) high power, high efficiency, three stage power amplifier module for Dual Mode CDMA/PCS wireless handsets. The device is manufactured on an advanced InGaP HBT MMIC technology offeri...
Mfg:ADIG Pack:BGA D/C:01+ Vendor:Other Category:Other
The AWT6105 is a high power, high efficiency amplifier module for Dual Mode CDMA/AMPS wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliabili...
Vendor:Other Category:Other
The AWT6104M5 is a 3.5V power amplifier module for use in PCS TDMA wireless handsets and communication systems.
Vendor:Other Category:Other
Vendor:Other Category:Other
The AWT6102 is a 3.5V power amplifier module for use in dual Mode GSM/DCS/PCS wireless handsets and communication systems.
Vendor:Other Category:Other
The AWT4502 is a monolithic power amplifier IC suited for 3 Volt PCS CDMA/TDMA wireless handset applications.
Vendor:Other Category:Other
The AWT1921 is a four stage monolithic amplifier for use in communication systems that require high gain and output intercept point. The device has been specifically designed for fixed satellite access equipment and hand...
Vendor:Other Category:Other
The AWT1921 is a four stage monolithic amplifier for use in communication systems that require high gain and output intercept point. The device has been specifically designed for fixed satellite access quipment and hande...
Vendor:Other Category:Other
AWT0902X is a monolithic power amplifier suited for AMPS cellular telephone applications in a plastic package,reducing both size and cost in next generation terminals.
There are some AWT0902Xfeatures as follows.First is...
Vendor:Other Category:Other
AWT0901X is a monolithic power amplifier suited for DAMPS cellular telephone applications in a plastic package,reducing both size and cost in next generation terminals.
There are some features AWT0901X as follows.First ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The AWS5534 is a single pole, three throw (SP3T) RF switch developed for CDMA applications; specifically, highly symmetric single-tone desensitivity performance. Manufactured in ANADIGICS's state-of-the-art pHEMT process...
Mfg:ANADIGCS Pack:QFN D/C:07+ Vendor:Other Category:Other
The AWS5532R is a single pole, double throw (SPDT) RF switch developed for applications requiring very low distortion at high input drive levels. Manufactured in ANADIGICS's state-of-the-art pHEMT process, the device ...
Vendor:Other Category:Other
The AWS5532 is a single pole, double throw (SPDT) RF switch developed for applications requiring very low distortion at high input drive levels. Manufactured in ANADIGICS' state-of-the-art pHEMT process, the device uses ...
Vendor:Other Category:Other
The AWS5524 is a single pole, four throw (SP4T) RF switch developed to meet the stringent requirements of GSM systems. Manufactured in ANADIGICS' state-of-the-art pHEMT process, the device uses patent-pending circuit top...
Vendor:Other Category:Other
The AWS5523 is a single pole, three terminal (SP3T) RF switch developed to meet the stringent Mrequirements of GSM systems. Manufactured in ANADIGICS's state-of-the-art pHEMT process, the device uses patent-pending circu...
Vendor:Other Category:Other
The AWS5522 is a single pole, double throw (SPDT) RF switch developed to meet the stringent requirements of GSM and CDMA systems.Manufactured in ANADIGICS's state-of-the-art pHEMT process, the device uses patent-pending ...
Vendor:Other Category:Other
The AWS5518 is a Single Pole Double Throw (SPDT) GaAs MMIC switch assembled in a SOT-26 plastic package. The AWS5518 is designed for applications that require low insertion loss, high isolation, high linearity, and small...
Vendor:Other Category:Other
The AWS5508 SP4T high power antenna switch is designed to operate in the GSM 900Mhz, DCS 1800MHz, and PCS 1900MHz frequency bands. All 4 ports of the switch have identical electrical and linearity performance which allow...
Vendor:Other Category:Other
The AWS5506 is a Single Pole Double Throw GaAs MMIC switch assembled in a SOT-6 plastic package.The AWS5506 is designed for analog and digital application that require for insertion loss, small size,and low cost. State s...
Vendor:Other Category:Other
The AWS5504 is a Single Pole Double Throw (SPDT) GaAs MMIC switch assembled in a SOT-6 plastic package. The AWS5504 is designed for analog and digital applications that require low insertion loss, high linearity, and sma...
Vendor:Other Category:Other
The AWS5504 is a Single Pole Double Throw (SPDT) GaAs MMIC switch assembled in a SOT-6 plastic package. The AWS5504 is designed for analog and digital applications that require low insertion loss, high linearity, and sma...
Vendor:Other Category:Other
The AWS5503 is a Single Pole Double Throw (SPDT) GaAs MMIC assembled in a MSOP-8 plastic package. The AWS5503 is designed for analog and digital applications that require low insertion loss, high linearity, and small siz...
Vendor:Other Category:Other
The AWS5502 is a Single Pole Double Throw GaAs MMIC Switch assembled in a SOT-6 plastic package. The AWS5502 is designed for analog and digital application that require low insertion loss, small size, and low cost. State...
Vendor:Other Category:Other
The ANADIGICS AWM6433 WiMAX Power Amplifier is a high performance device that delivers exceptional linearity and high efficiency at high levels of output power. Designed for portable or mobile applications in the 3.4 - 3...
Vendor:Other Category:Other
The ANADIGICS AWM6432 WiMAX Power Amplifier is a high performance device that delivers exceptional linearity and efficiency at high levels of output power.
Designed to operate in the 3.5 GHz band, it supports the IEEE 8...
Vendor:Other Category:Other
The ANADIGICS AWM6431 WiMAX Power Amplifier is a high performance device that delivers exceptional linearity and efficiency at high levels of output power. Designed to operate in the upper portion of the 3.5 GHz band, it...
Vendor:Other Category:Other
The ANADIGICS AWM6430 WiMAX Power Amplifier is a high performance device that delivers exceptional linearity and efficiency at high levels of output power. Designed to operate in the 3.5 GHz band, it supports the IEEE 80...
Vendor:Other Category:Other
The ANADIGICS AWM6424 WiMAX Power Amplifier is a high performance device that delivers exceptional linearity and efficiency at high levels of output power. Designed for portable or mobile applications in the 2.3 - 2.7 GH...
Mfg:ANADIGICS Vendor:Other Category:Other
The ANADIGICS AWM6423 WiMAX Power Amplifier is a high performance device that delivers exceptional linearity and efficiency at high levels of output power. Designed for portable or mobile applications in the 2.5-2.7 GHz ...
Vendor:Other Category:Other
The ANADIGICS AWM6422 WiMAX Power Amplifier is a high performance device that delivers exceptional linearity and efficiency at high levels of output power. Designed for portable or mobile applications in the 2.3-2.4 GHz ...
Vendor:Other Category:Other
The AWM2000 has the following features including State-of-the-art silicon micromachining;Sensitive to low flows-0.1 sccm to 20 LPM;Adaptable for use with higher flows;Fast response time;Analog output;Low power consumptio...
Vendor:Other Category:Other
The ANADIGICS AWL9924 dual band power amplifier is a high performance InGaP HBT IC designed for transmit applications in the 2.4-2.5 GHz and 4.9-5.9 GHz band.
Matched to 50 at all RF inputs and outputs, the part requir...
Vendor:Other Category:Other
The ANADIGICS AWL9232 is a high performance InGaP HBT power amplifier, low-noise amplifier and RF switch integrated on a single IC. It is particularly applicable in consumer electronics products (e.g., cell phones, MP3 p...
Vendor:Other Category:Other
The ANADIGICS AWL9224 power amplifier is a high performance InGaP HBT IC designed for transmit applications in the 2.4-2.5 GHz band. Matched to 50 at the input and output, the part requires no additional RF matching comp...
Vendor:Other Category:Other
The ANADIGICS AWL6951 dual band power amplifier is a high performance InGaP HBT power amplifier module designed for transmit applications in the 2.4-2.5 GHz and 4.9-5.9 GHz band. Matched to 50 ? at all RF inputs and outp...
Vendor:Other Category:Other
The ANADIGICS AWL6950 dual band power amplifier is a high performance InGaP HBT power amplifier module designed for transmit applications in the 2.4-2.5 GHz and 4.9-5.9 GHz bands. Matched to 50 Ω at all RF inputs a...
Vendor:Other Category:Other
Vendor:Other Category:Other
The ANADIGICS AWL6153 WLAN Power Amplifier is an easy to use module that delivers high levels of linearity and efficiency for high data rate applications. Designed for the 2.4 GHz WLAN standards, it supports the 54 Mbps ...
Mfg:ANADIGICS Pack:QFN D/C:409 Vendor:Other Category:Other
The ANADIGICS AWL6152 WLAN Power Amplifier is an easy to use module that delivers high levels of linearity and efficiency for high data rate applications. Designed for the 2.4 GHz WLAN standards, it supports the 54 Mbps ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The AWE6174 Power amplifier module (PAM) supports dual, tri and quad band applications for both GMSK and 8-PSK modulations when used in an open loop polar architecture. The module consists of two InGaP HBT amplifier chai...
Vendor:Other Category:Other
This quad band power amplifier module AWE6173 supports dual, tri and quad band applications for both GMSK and 8-PSK modulation schemes. There are two amplifier chains, one to support GSM850/900 bands, the other for DCS/P...
Vendor:Other Category:Other
The AWE6157 Power amplifier module (PAM) supports dual, tri and quad band applications for both GMSK and 8-PSK modulation schemes. The module consists of two InGaP HBT amplifier chains - one to support GSM850/900 bands, ...
Vendor:Other Category:Other
The AWD1900 is a monolithic drive amplifier suited for PCS telephone applications.
There are some features AWD1900 as follows.First is high linearity.The second is built in step attenuator.Then is high gain.Next is 28 P...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The AWC6313 addresses the demand for increased integration in dual-band handsets for KDDI's Japan CDMA network. The small footprint 3 mm x 5 mm x 1 mm surface mount RoHS compliant package contains independent RF PA paths...
Vendor:Other Category:Other
The AWC6312R meets the increasing demands for higher efficiency and smaller footprint in CDMA 1X handsets. The AWC6312R uses ANADIGICS' exclusive InGaP-Plus? technology, which combines HBT and pHEMT devices on the same d...
Vendor:Other Category:Other
The AWC6311R meets the increasing demands for higher efficiency and smaller footprint in CDMA 1X handsets. The package pinout was chosen to enable handset manufacturers to switch from a 4 mm x 4 mm PA module with few lay...
Vendor:Other Category:Other
The AWB7226R is a highly isolated, fully matched, Multi-Chip-Module (MCM) designed for picocell, femtocell, and customer premises equipment (CPE) applications where stringent linearity and high power requirements are nec...
Vendor:Other Category:Other
Vendor:Other Category:Other
The AWB6262R power amplifier module is designed for femtocell and customer premises equipment (CPE) where stringent linearity and high output power requirements are necessary to meet the extremely demanding needs of high...
Vendor:Other Category:Other
The APW7016 provides a complete control and protection for a DC-DC converter optimized for high performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronousrectified buck topolo...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:ALPHA Vendor:Other Category:Other
The AW002R2-12 is a high power IC FET SPDT switch in a plastic SOIC-8 package. This switch has been designed for use where extremely high linearity is required. It can be controlled with positive, negative or a combinati...
Vendor:Other Category:Other
The AVXX32E-B is a series of single-chip synthesizing CMOS VLSI which synthesizes voice by LOG_PCM algorithm. Table programming and shared multiple I/O pins make the applications flexible. Powerful functions and pure spe...
Vendor:Other Category:Other
The AV1232E, AV1832D, AV2432C are single-chip voice synthesizing CMOS IC. They can synthesize voice up to 12, 18 and 24 seconds, using APLUS 5-bit LOGPCM algorithm. Customer speech data can be edited and programmed into ...
Vendor:Other Category:Other
AVS-KIT1 SMT (Surface Mount) Aluminum Electrolytic Capacitor Kit, 170 pcs
Vendor:Other Category:Other
AVL Series are designed to protect sensitive electronics devices against high voltage transient surges in the low voltage region. They offer excellent transient energy absorption due to improved energy volume distributio...
Vendor:Other Category:Other
The AVS20 (AVS200) kit is an automatic mains selector (120/230V AC) to be used in SMPS with input power < 300 W. It is composed of 2 devices :• The Controller is optimized for low consumption and high security t...
Vendor:Other Category:Other
The AVS12 kit is an automatic mains selector (110/220V AC) to be used in SMPS < 500 W. It is composed of 2 devices :• The Controller is optimized for low consumption and high security triggering of the triac. Wh...
Vendor:Other Category:Other
The AVS10 kit is an automatic mains selector (110/220V AC) to be used in SMPS < 300 W. It is composed of 2 devices :• The Controller is optimized for low consumption and high security triggering of the triac. Wh...
Vendor:Other Category:Other
The AVS08 kit is an automatic mains selector (110/220V AC) to be used in SMPS < 200 W. It is composed of 2 devices :• The Controller is optimized for low consumption and high security triggering of the triac. Wh...
Vendor:Other Category:Other
AVS SMT (Surface Mount) Aluminum Electrolytic Capacitor
Vendor:Other Category:Other
AVRF SMT (Surface Mount) Aluminum Electrolytic Capacitor
Vendor:Other Category:Other
This application note describes a single-phase power/energy meter with tamper logic. The design measures active power, voltage, and current in a single-phase distribution environment. It differs from ordinary single-phas...
Vendor:Other Category:Other
AVR077: Opto Isolated Emulation for the DebugWIRE (9 pages, revision A, updated 1/08)This application note describes how to implement an optoisolated interface for the DebugWIRE. This device could help the debug of appli...
Vendor:Other Category:Other
The AVPro® 5003 is a low cost IC that performs switching of analog audio and video signals. The device accepts analog audio and video inputs from three external sources, typically a video encoder IC/stereo DAC, an au...
Vendor:Other Category:Other
Vendor:Other Category:Other
The AVM1504D is single-chip 3 channels timbre generator that can synthesize (2 ch. melody and/or 1 ch. voice). It is designed by instruction-based synthesizing method. Total has 504 instruction steps. Total voice is up t...
Vendor:Other Category:Other
AVL series is a kind of 14 pin,military grade,triple output TTL active.
What comes next is about the AVL series DC electrical characteristics.The minimum VOH (high level output voltage) is 2.5 V at VCC=MIN,VIL=MAX,IOH=-...
Vendor:Other Category:Other
AVJ series is a kind of 14 pin,triple output TTL active.
What comes next is about the AVJ series DC electrical characteristics.The minimum VOH (high level output voltage) is 2.7 V at VCC=MIN,VIL=MAX,IOH=MAX.The maximum ...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.