© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Mfg:PAN Pack:SOT-143 Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:PAN Vendor:Other Category:Other
Mfg:PANASONI Pack:SOT323 D/C:04+ Vendor:Other Category:Other
Mfg:PAN Pack:SOT-323 Vendor:Other Category:Other
Mfg:PAN Pack:SOT-423 Vendor:Other Category:Other
Mfg:PAN Vendor:Other Category:Other
Mfg:PAN Pack:SOT-423 Vendor:Other Category:Other
Mfg:PAN Pack:SOT-163 Vendor:Other Category:Other
Vendor:Other Category:Other
The MA1114-1 is a 30W power amplifier designed for PCS, which comprises 4 stages GaAs FET and 2 stages Si bipolar transistors, also RF power monitoring circuit.
Vendor:Other Category:Other
The MA1113-1 is a 20W power amplifierdesigned for PCS, which comprises 4 stages GaAs FET and 2 stages Si bipolar transistors, also RF power onitoring circuit.
Vendor:Other Category:Other
The MA1100-1 is a 30W power amplifier designed for DCS 1800, which comprises 4 stages GaAs FET and 2 stages Si bipolar ansistors, also RF power monitoring circuit.
Vendor:Other Category:Other
The MA10U was designed to handle the high inrush loads of 3 phase transformers, power supplies, motors, etc. The MA protects wiring and equipment from damage caused by the three major classes of over-current, yet greatly...
Vendor:Other Category:Other
Vendor:Other Category:Other
The MA1078-2 is a 20W power amplifier designed for DCS 1800, which comprises 4stages GaAs FET and 2 stages Si bipolar transistors, also RF power monitoring circuit.
Mfg:PANASONIC Pack:SOT-23 D/C:07+(ROHS) Vendor:Other Category:Other
Vendor:Other Category:Other
The MA1065-1 are 1.9 GHz band power amplifier modules (Po = +4.0W), constructed by driver-amp, highpower-amp, power-monitor and control-circuit. Input and Output impedances are designed to 50
Pack:SIP Vendor:Other Category:Other
Vendor:Other Category:Other
The MA1046-1 is a 1.9 GHz band power amplifier (Po = +3.1W), constructed by 3 stages of GaAs MESFET, RF matching circuit, and DC bias circuit. The shield cap is made of metal. Input and Output impedances are designed to ...
Pack:SIP Vendor:Other Category:Other
Pack:SIP Vendor:Other Category:Other
Pack:SIP Vendor:Other Category:Other
Mfg:M/A-COM Pack:N/A D/C:N/A Vendor:Other Category:Other
The MA0S506AJ is a medium power 5.0 6.0 SPDT switch. Typical applications include the transmit/receive functions in 802.11a, Hiperlan, and fixed wireless access applications. All RF impedances are 50 ohms, and all RF po...
Mfg:M/A-COM Vendor:Other Category:Other
The MA08602FR is a five stage MMIC power amplifier fabricated on M/A-COM's Self-Aligned MSAG ® MESFET Process. This product is fully matched to 50 ohms on both the input and the output and can be used as either a dri...
Mfg:M/A-COM Pack:N/A D/C:N/A Vendor:Other Category:Other
The MA08509D is a three stage MMIC power amplifier fabricated using M/A-COM's mature GaAs Self-Aligned MSAG® MESFET Process. This product is fully matched to 50 ohms on both the input and the output.
Mfg:M/A-COM Vendor:Other Category:Other
The MA02305AK is an RF power amplifier based on M/ACOM's Self-Aligned MSAG® MESFET Process. This product is designed for use in 2.4 GHz ISM products as a booster for high power Bluetooth devices. Output power can be ...
Vendor:Other Category:Other
Mfg:MA4E2200B-287T Pack:MA4P282-287T MA4P7447-287T D/C:MA4ST240CA-287 Vendor:Other Category:Other
The MA02206GJ is a DECT Power amplifier based on M/A-COM's Self-Aligned MSAG MESFET Process. This product is designed for use in 3.6 V DECT handsets and base stations.
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
Mfg:MACOM Pack:TSSOP16 Vendor:Other Category:Other
Mfg:MA4E2200A-287T Pack:MA4P282-1141T MA4P7447-1141T D/C:MA4ST240-287 Vendor:Other Category:Other
The MA02203AD is a two stage power amplifier designed for DECT applications to have an output power of +26.5 dBm with an input power of 2 dBm. This power amplifier operates at +3.6 volts with 35% typical power added effi...
Mfg:M/A-COM Vendor:Other Category:Other
The MA02107AF is a three stage power amplifier, designed for paging applications to have an output power of +30.8 dBm with an input power of 0 dBm. This power amplifier operates at +3.4 volts with 55% typical power added...
Mfg:M/A-COM Vendor:Other Category:Other
Mfg:M/A-COM Pack:N/A D/C:N/A Vendor:Other Category:Other
The MA01503D is a balanced, three-stage low noise amplifier and limiter die fabricated using M/A-COM's mature GaAs Self-Aligned MSAG® MESFET Process. This product is fully matched to 50 ohms on both the input and the...
Mfg:M/A-COM Pack:N/A D/C:N/A Vendor:Other Category:Other
The MA01502D is a balanced, two-stage low noise amplifier and limiter die fabricated using M/A-COM's mature GaAs Self-Aligned MSAG® MESFET Process. This product is fully matched to 50 ohms on both the input and the o...
Vendor:Other Category:Other
MA Series 14 DIP, 5.0 Volt, ACMOS/TTL, Clock Oscillators
Vendor:Other Category:Other
Epoxy encapsulated flat pack type, high power dissipation, low output resistance
Vendor:Other Category:Other
M9960 11a, Epoxy encapsulated flat pack type, high power dissipation, low output resistance
Vendor:Other Category:Other
Vendor:Other Category:Other
Pack:DIP14 D/C:07+/08+ Vendor:Other Category:Other
The M-993 is a monolithic CMOS integrated circuit designed to generate multifrequency (MF) tone pairs for use in trunk signaling. The tones generated conform to CCITT R1 signal recommendations and to AT&T MF standard...
Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC GENERATOR TONE LP CMOS 16SOIC
Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC GENERATOR TONE LP CMOS 14-DIPThe M-991 is a call progress tone generator integrated circuit for use in telephone systems. The circuit uses low-power CMOS techniques to generate tones which are digitally controlled and highly linear. The M-991 is des...
Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC TRANSCEIVER MFC 2CHAN 44-PLCC
Vendor:Clare Category:Integrated Circuits (ICs)
IC TRANSCEIVER MFC 2CHAN 40-DIP
Vendor:Other Category:Other
The M-986-1R2 and -2R2 MFC Transceivers contain all the logic necessary to transmit and receive CCITT R2F (forward) and R2B (backward) multifrequency signals on one 40-pin integrated circuit (IC). M-986- 1R2 is a single-...
Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC TRANSCEIVER MF 2CHAN 44-PLCC
Vendor:Clare Category:Integrated Circuits (ICs)
IC TRANSCEIVER MF 2CHAN 40-DIP
Vendor:Other Category:Other
The M-986-2A1 dual channel MF Transceiver contains all the logic necessary to transmit and receive (North American) CCITT Region 1 multifrequency signals on one integrated circuit (IC).Operating with a 20.48 MHz crystal,...
Vendor:Other Category:Other
Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC DETECTOR TONE PREC 22-DIP
Vendor:Other Category:Other
The M-985-01 is an integrated circuit precise tone detector for call progress and special information tones (SIT), as defined by CCITT.The use of integrated circuit techniques allows the M-985-01 to pack the eight filter...
Vendor:Other Category:Other
The M-984-02 Special Information Tone Detector is a monolithic integrated circuit designed to provide reliable detection of many common telephone network status signals. In particular, it detects the signals known as Spe...
Mfg:TELTONE Pack:SOP Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC DETECTOR TONE SPECIAL 20-SOIC
Mfg:TELTONE Pack:PDIP Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC DETECTOR TONE SPECIAL 22-DIP
Vendor:Other Category:Other
The M-982-02 is an integrated circuit precise tone detector for special-purpose use in automatic following of switched telephone calls. The circuit uses lowpower CMOS techniques to provide the complete filtering and cont...
Mfg:TEL TONE D/C:03+ Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC DETECTOR TONE GEN PURP 16SOIC
Mfg:TELTONE D/C:08+ Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC DETECTOR TONE GEN PURP 8-DIP
Vendor:Other Category:Other
The M-980-02 is an integrated circuit tone detector for general purpose use in automatic following of switched telephone calls. The circuit uses low-power CMOS techniques to provide the complete filtering and control req...
Vendor:Other Category:Other
The M95M01-R is an electrically erasable programmable memory (EEPROM) device. It is accessed by a high speed SPI-compatible bus. The memory array is organized as 131 072 × 8 bit. It can also be seen as 512 pages of 256 b...
Mfg:AMI Pack:DIP Vendor:Clare Category:ICs, Integrated Circuits, Semiconductors
IC MONITOR/COUNTER 3STATE 14-DIPThe M-959 is a low-power dial pulse counter and hook status monitor. Contained in a 14-pin package, the M-959 requires no external components except a single 3.579 MHz television color burst crystal.The M-959 is typicall...
Vendor:Other Category:Other
The M95640-WBN6TP is one member of the M95640 family which designed as one kind of 64 Kbit and 32Kbit serial SPI bus EEPROM with high speed clock. These electrically erasable programmable memory (EEPROM) devices are acce...
Vendor:Other Category:Other
During all operations, VCC must be held stable and within the specified valid range: VCC(min) to VCC(max). All of the input and output signals must be heldHigh or Low (according to voltages of VIH, VOH, VIL or VOL, as sp...
Vendor:Other Category:Other
During all operations, VCC must be held stable and within the specified valid range: VCC(min) to VCC(max). All of the input and output signals must be heldHigh or Low (according to voltages of VIH, VOH, VIL or VOL, as sp...
Vendor:Other Category:Other
During all operations, VCC must be held stable and within the specified valid range: VCC(min) to VCC(max). All of the input and output signals of M95640-R must be heldHigh or Low (according to voltages of VIH, VOH, VIL o...
Vendor:Other Category:Other
During all operations, VCC must be held stable and within the specified valid range: VCC(min) to VCC(max). All of the input and output signals must be heldHigh or Low (according to voltages of VIH, VOH, VIL or VOL, as sp...
Vendor:Other Category:Other
These electrically erasable programmable memory (EEPROM) devices are accessed by a high speed SPI-compatible bus. The memory array is organized as 65536 x 8 bit.The M95512-W is accessed by a simple serial interface that ...
Vendor:Other Category:Other
These electrically erasable programmable memory (EEPROM) devices are accessed by a high speed SPI-compatible bus. The memory array is organized as 65536 x 8 bit.The M95512-R is accessed by a simple serial interface that ...
Vendor:Other Category:Other
During all operations, VCC must be held stable and within the specified valid range: VCC(min) to VCC(max). All of the input and output signals must be heldHigh or Low (according to voltages of VIH, VOH, VIL or VOL, as sp...
Vendor:Other Category:Other
During all operations, VCC must be held stable and within the specified valid range: VCC(min) to VCC(max). All of the input and output signals must be heldHigh or Low (according to voltages of VIH, VOH, VIL or VOL, as sp...
Vendor:Other Category:Other
During all operations, VCC must be held stable and within the specified valid range: VCC(min) to VCC(max). All of the input and output signals must be heldHigh or Low (according to voltages of VIH, VOH, VIL or VOL, as sp...
Vendor:Other Category:Other
These electrically erasable programmable memory (EEPROM) devices M95320-BN3G are accessed by a high speed SPI-compatible bus. The memory array is organized as 8192 x 8 bit (M95640), and 4096 x 8 bit (M95320). The device ...
Mfg:ST D/C:06+ Vendor:Other Category:Other
During all operations, VCC must be held stable and within the specified valid range: VCC(min) to VCC(max). All of the input and output signals must be heldHigh or Low (according to voltages of VIH, VOH, VIL or VOL, as sp...
Vendor:Other Category:Other
The M95256-WBN6TP is one member of the M95256 family which designed as one kind of 256 Kbit and 128Kbit serial SPI bus EEPROM with high speed clock.These electrically erasable programmable memory (EEPROM) devices are acc...
Mfg:STM D/C:02+ Vendor:Other Category:Other
These electrically erasable programmable memory (EEPROM) devices are accessed by a high speed SPI-compatible bus. The memory array isorganized as 32768 x 8 bit (M95256) and 16384 x 8 bit (M95128).The M95256 is accessed b...
Mfg:ST D/C:06+ Vendor:Other Category:Other
Vendor:Other Category:Other
The M95128-WBN6TP is one member of the M95128 family which designed as one kind of 256 Kbit and 128Kbit serial SPI bus EEPROM with high speed clock.These electrically erasable programmable memory (EEPROM) devices are acc...
Mfg:ST Pack:SMD8 D/C:93 Vendor:Other Category:Other
These electrically erasable programmable memory (EEPROM) devices are accessed by a high speed SPI-compatible bus. The memory array isorganized as 32768 x 8 bit (M95256) and 16384 x 8 bit (M95128).The device is accessed b...
Mfg:ST D/C:06+ Vendor:Other Category:Other
Vendor:STMicroelectronics Category:Integrated Circuits (ICs)
IC SRL EEPROM 4KBIT 5.5V 8 SOICThe M95040-WMN6TP is one member of the M95040 family which is 4/2/1 Kbit Serial SPI Bus EEPROM With High Speed Clock. The M95040 is available in Plastic Dual-in-Line, Plastic Small Outline and Thin Shrink Small Outline p...
Mfg:ST D/C:06+ Vendor:Other Category:Other
The M95040 is a 4 Kbit (512 x 8) electrically erasable programmable memory (EEPROM), accessed by a high speed SPI-compatible bus. The other members of the family (M95020 and M95010) are identical, though proportionally s...
Vendor:Other Category:Other
The M95040 is a 4 Kbit (512 x 8) electrically eras- able programmable memory (EEPROM), access- ed by a high speed SPI-compatible bus. The other members of the family (M95020, M95010) are identical, though proportionally ...
Mfg:ST Pack:SOP D/C:99+ Vendor:Other Category:Other
The M95040 is a 4 Kbit (512 x 8) electrically erasable programmable memory (EEPROM), accessed by a high speed SPI-compatible bus. The other members of the family (M95020 and M95010) are identical, though proportionally s...
Mfg:ST Pack:SOP-8 D/C:99+ Vendor:Other Category:Other
The M95040 is a 4 Kbit (512 x 8) electrically erasable programmable memory (EEPROM), accessed by a high speed SPI-compatible bus. The other members of the family (M95020 and M95010) are identical, though proportionally s...
Vendor:Other Category:Other
Vendor:Other Category:Other
This specification covers a range of 4K, 2K, 1K bit serial Electrically Erasable Programmable Memo-ry (EEPROM) products (respectively for M93S66,M93S56, M93S46). In this text, these products are collectively referred to ...
Mfg:ST Pack:01+ D/C:SOP8 Vendor:Other Category:Other
This specification covers a range of 4K, 2K, 1K bitserial Electrically Erasable Programmable Memo-ry (EEPROM)products (respectively for M93S66,M93S56, M93S46). In this text, these products arecollectively referred to as ...
Vendor:Other Category:Other
This specification covers a range of 4K, 2K, 1K bitserial Electrically Erasable Programmable Memo-ry (EEPROM)products (respectively for M93S66,M93S56, M93S46). In this text, these products arecollectively referred to as ...
Mfg:ST D/C:07/08+ Vendor:Other Category:Other
This specification covers a range of 4K, 2K, 1K bitserial Electrically Erasable Programmable Memo-ry (EEPROM)products (respectively for M93S66,M93S56, M93S46). In this text, these products arecollectively referred to as ...
Vendor:Other Category:Other
M93C86, these electrically erasable programmable memo- ry (EEPROM) devices are accessed through a Se- rial Data Input (D) and Serial Data Output (Q) using the MICROWIRE bus protocol.
Mfg:CSI Pack:SOP-8 D/C:01+ Vendor:Other Category:Other
Vendor:Other Category:Other
These electrically erasable programmable memory (EEPROM) devices M93C76 are accessed through a Se- rial Data Input (D) and Serial Data Output (Q) using the MICROWIRE bus protocol.
Mfg:ST D/C:6520
Vendor:Other Category:Other
Vendor:Other Category:Other
Features of the M93C66 are:(1)industry standard MICROWIRE bus;(2)single supply voltage:4.5 to 5.5V for M93Cx6,2.5 to 5.5V for M93Cx6-W,1.8 to 5.5V for M93Cx6-R;(3)dual organization:by word (x16) or byte(x8);(4)programmin...
Vendor:Other Category:Other
These electrically erasable programmable memory (EEPROM) devices M93C56 are accessed through a Se- rial Data Input (D) and Serial Data Output (Q) using the MICROWIRE bus protocol.
Mfg:ST D/C:98 Vendor:Other Category:Other
Vendor:Other Category:Other
These electrically erasable programmable memo- ry (EEPROM) devices M93C46 are accessed through a Se- rial Data Input (D) and Serial Data Output (Q) using the MICROWIRE bus protocol.
Mfg:ST Pack:04+ D/C:150 Vendor:Other Category:Other
Mfg:ST D/C:5018
Vendor:Other Category:Other
These electrically erasable programmable memory (EEPROM) devices M93C06 are accessed through a Se- rial Data Input (D) and Serial Data Output (Q) using the MICROWIRE bus protocol.
© 2008-2012 SeekIC.com Corp.All Rights Reserved.