© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The UTCX0202A is suitable for all applications where the available gate current is limited, such as ground fault circuit interruptors, overvoltage crowbar protection in low power supplies, capacitive ignition circuit,..
Vendor:Other Category:Other
The UTCX0202 is suitable for all applications where the available gate current is limited, such as ground fault circuit interruptors, overvoltage crowbar protection in low power supplies, capacitive ignition circuit,..
Vendor:Other Category:Other
The UTCUT2306 is a micropower step-up DC/DC converter ideal for use in small, low voltage, battery-operated systems. The devices operate from a wide input supply range of 1.5V to 8V.The UTCUT2306 generate regulated outpu...
Vendor:Other Category:Other
Glass passivated , UTCUT138E, sensitive gate triacs in a plastic envelope, intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadra...
Vendor:Other Category:Other
Passivated, sensitive gate triacs in a plastic envelope, UTCUT136E, intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants.
Vendor:Other Category:Other
The UTCUS108S is suitable to fit all modes of control, found in applications such as overvoltage crowbar protection, motor control circuits in power tools and kitchen aids, inrush current limiting circuits, capacitive di...
Vendor:Other Category:Other
Thanks to highly sensitive triggering levels, the UTCUS104S is suitable for all applications where the available gate current is limited, such as motor control for hand tools, kitchen aids, overvoltage crowbar protection...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The UTCUM66TXXL series are CMOS LSI designed for using in door bell,telephone and toy applications. It is an on-chip ROM programmed for musical performance and is available in TO-92 package. It has the following features...
Vendor:Other Category:Other
The UTCUC723 is a silicon monolithic integrated circuit, designed for service as voltage regulator at output voltages, ranging from 2V to 37V at current up to 150mA. It includes a temperature-compensated reference amplif...
Vendor:Other Category:Other
The UTCUC3843A provide the necessary functions to implement off-line or DC to DC fixed frequency current mode , controlled switching circuits with a minimal external part count
Vendor:Other Category:Other
The UTCUC3842A provide the necessary functions to implement off-line or DC to DC fixed frequency current mode , controlled switching circuits with a minimal external part count
Vendor:Other Category:Other
The UTCUA8868 is a five-channel BTL driver IC for driving the motors and actuators such as used in DVD player and CD-ROM.
Vendor:Other Category:Other
The UTCU652 is a Integrated Hall sensor with latch designed for electronic commutation of brushless DCmotor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that ampl...
Vendor:Other Category:Other
The UTCU651 is a Integrated Hall sensor with latch designed for electronic commutation of brushless DC motor applications. The UTCU651 includes an on-chip Hall voltage generator for magnetic sensing, a comparator that am...
Vendor:Other Category:Other
The UTCU587 voltage regulators are monolithic integrated circuits, designed for use in applications requiring a well regulated positive output voltage with +5V input. The output voltage can be adjustable from 3.8 V down ...
Vendor:Other Category:Other
The UTCU585 voltage regulators are monolithic integrated circuits, designed for use in applications requiring a well regulated positive output voltage with +5V input. The output voltage can be adjustable from 3.8 V down ...
Vendor:Other Category:Other
The UTCU584 voltage regulators are monolithic integrated circuits, designed for use in applications requiring a well regulated positive output voltage with +5V input. The output voltage can be adjustable from 3.8 V down ...
Vendor:Other Category:Other
The UTCTL494 incorporates all the functions required in the construction of a pulse-width modulation switching circuit. Designed primarily for switching power supply control or DCDC convectors, it offers the systems engi...
Vendor:Other Category:Other
The UTCTL431L is a three-terminal adjustable regulator with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between Vref(approximately 2.5V) and 20V with two ...
Vendor:Other Category:Other
The UTCTL431A is a three-terminal adjustable regulator with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between Vref(approximately 2.5V) and 36V with two ...
Vendor:Other Category:Other
The UTCTEA2025A is a monolithic integrated circuit, consisting of a 2-channel power amplifier. It is suitable for stereo and bridge amplifier application of radio cassette tape recorders.
Vendor:Other Category:Other
The UTCTDA2822H is a monolithic integrated audio amplifier in a 8-Pin plastic dual in line package. It is designed for portable cassette players and radios
Vendor:Other Category:Other
The UTCTDA2030is a monolithic audio power amplifier integrated circuit.
Vendor:Other Category:Other
The UTCTDA2003 is a monolithic audio power amplifier integrated circuit.
Vendor:Other Category:Other
The UTCTA7668BP is a dual pre-amplifier with ALC and muting designed for use recorder/playback amplifier of tape recorder. It is suitable for a stereo set and a radio cassette recorder.
Vendor:Other Category:Other
The UTCTA7368P is suitable for the audio power amplifier of portable cassette tape recorder and radio.
Vendor:Other Category:Other
Vendor:Other Category:Other
The UTCRCT02 can be used with the decoder RCR02 to provide a complete control functions to the remote-controlled toy. The RCT02 has five input pins corresponding with the five function buttons i.e, forward, backward, rig...
Vendor:Other Category:Other
The UTCRCR03 is CMOS LST designed for the remote controlled toy. The received signal is amplified by the three-stage amplifier, and then the appropriate amplified signal is sampled, fault-tolerantly checked and decoded t...
Vendor:Other Category:Other
The UTCNE556 dual monolithic circuit is a highly stable controller capable of producing accurate delays or oscillation. The UTCNE556 is the dual of UTC NE555; timing is provided an external resistor and capacitor for eac...
Vendor:Other Category:Other
The UTCMPSH10 is desinged for using as VHF and UHF oscillators and VHf Mixer in a tuner of a TV receiver.
Vendor:Other Category:Other
The UTCMC4580 is the dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application.Featuring noiseless, higher gain bandwidth, high output current and low...
Vendor:Other Category:Other
The UTCMC4560 integrated circuit is a high-gain,wide-bandwidth, dual operational amplifier capable ofdriving 20V peak-to-peak into 400 loads. The MC4560 combines many of the features of the MC4558 as well as providing t...
Mfg:UTC Vendor:Other Category:Other
The UTCMC34072 offer 4.5MHz of gain bandwidth product, 13V/ms slew rate and fast setting time without the use of JFET device technology. Although UTCMC34072 can be operated from split supplies, it is particularly suited ...
Vendor:Other Category:Other
The UTCMC34063A is a monolithic regulator subsystem, intended for use as DC to DC converter. This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current out...
Vendor:Other Category:Other
The UTCMC34063 is a monolithic regulator subsystem, intended for use as DC to DC converter. This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current outp...
Vendor:Other Category:Other
The UTCMC14511 BCDtoseven segment latch/decoder/driver is constructed with complementary MOS (CMOS) enhancement mode devices and NPN bipolar output drivers in a single monolithic structure. The circuit provides the funct...
Vendor:Other Category:Other
The UTCM3368 is three input integrated video switch witch selects one video or audio signal from three input signals.It contains 6dB amplifier and its operating supply voltage range is 4.75 to 13V and bandwidth is 5MHz. ...
Vendor:Other Category:Other
The UTCM3366 is a three input integrated video switch selects one video or audio signal from three input signals.It contains driver circuit for 75load and is able to connect to TV monitor.Its operating supply voltage ran...
Vendor:Other Category:Other
The UTCM2951 is a monolithic integrated voltage regulator with low dropout voltage, and low quiescent current. It includes many features that suitable for different applications. Available in 3-pin TO-92, DIP-8 and SOP-8...
Vendor:Other Category:Other
The UTCM2950 is a monolithic integrated voltage regulator with low dropout voltage, and low quiescent current. It includes many features that suitable for different applications. Available in 3-pin TO-92, DIP-8 and SOP-8...
Vendor:Other Category:Other
The UTCM2904 consists of two independent, high gain, internally frequency compensated operation amplifiers which were designed specifically to operate from a single power supplies is also possible and the low power suppl...
Vendor:Other Category:Other
The UTCM2115 is a low operating Voltage(±1.0V min.) and low saturation output voltage(±2.0V p-p at supply voltage ± 2.5V) operational amplifier. It is applicable to handy type CD,radio cassete CD, and portable DAT, that ...
D/C:02+ Vendor:Other Category:Other
The UTCLP2951 is a monolithic integrated voltage regulator with low dropout voltage, and low quiescent current. It includes many features that suitable for different applications. Available in 3-pin TO-92, DIP-8 and SOP-...
Vendor:Other Category:Other
The UTCLP2950 is a monolithic integrated voltage regulator with low dropout voltage, and low quiescent current. It includes many features that suitable for different applications. Available in 3-pin TO-92, DIP-8 and SOP-...
Vendor:Other Category:Other
The UTCLMV358 are low voltage (2.7-5.5V) versions of the dual and quad commodity op amps, LM358, which currently operate at 5-30V. The LMV358 are the most cost effective solutions for the applications where low voltage o...
Vendor:Other Category:Other
The UTCLM79XX series of three-terminal negative regulators are available in TO-220 package and with severalfixed output voltage, making them useful in a wide range of application. Each type employs internal current limit...
Vendor:Other Category:Other
The UTCLM78XX family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications that required supply current up to 1 A.
Vendor:Other Category:Other
The UTCLM556 dual monolithic circuit is a highly stable controller capable of producing accurate delays or oscillation. The UTCLM556 is the dual of UTC NE555; timing is provided an external resistor and capacitor for eac...
Vendor:Other Category:Other
The UTCLM393 consists of two independent voltage comparators, designed specifically to operate from a single power supply over a wide voltage range.
Mfg:UTC Vendor:Other Category:Other
The UTCLM358 consists of two independent high gain, internally frequency compensated operational amplifier. It canbe operated from a single power supply and also split power supplies.
Vendor:Other Category:Other
The UTCLM317 is an adjustable 3-terminal positive voltage regulator, designed to supply more than 1.5A of output current with voltage adjustable from 1.3 to 37V.
Vendor:Other Category:Other
The UTCLM2954 is a monolithic integrated voltage regulator with low dropout voltage, and low quiescent current.It includes many features that suitable for different applications.Available in 3-pin TO-92,DIP-8,SOP-8 and S...
Vendor:Other Category:Other
The UTCLM1875 is a monolithic power amplifier offering very low distortion and high quality performance for consumer audio applications.The UTCLM1875 delivers 20 wants into a 4 or 8 load on +25V supplies.Using an 8 load...
Vendor:Other Category:Other
The UTCL6726 is a mask-programmable, monolithic integrated speech circuits for using in electronic telephones.UTCL6726 is designed for using with a low impedance microphone. Transmitting and receiving gain are regulated ...
Vendor:Other Category:Other
The UTCKA22427 is a one-chip AM/FM radio integrated circuit that is suitable for portable radio applications. It includes AM amplifier, local OSC, AM mixer, AM/FM amplifier, AM AGE, FM AGE circuit and also class b Audio ...
Vendor:Other Category:Other
The UTCKA22241 is a monolithic integrated circuit, consisting of dual equalizer amplifier with ALC, and it is suitable for stereo radio cassette tape recorders.
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The UTCHLB124 is designed for high voltage, high speed switching inductive circuits, and amplifier applications.
Vendor:Other Category:Other
The UTCHLB122 is a medium power transistor designed for use in switching applications.
Vendor:Other Category:Other
The UTCHE8550 is a low voltage high current small signal PNP transistor, designed for Class B push-pull 2W audio amplifier for portable radio and general purpose applications.
Vendor:Other Category:Other
The UTCHE8050 is a low voltage high current small signal NPN transistor, designed for Class B push-pull 2W audio amplifier for portable radio and general purpose applications.
Vendor:Other Category:Other
Vendor:Other Category:Other
The UTCCXA1191 is a one-chip FM/AM radio IC designed for radio-cassette tape recorders and headphone tape recorders.
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The UTCBA6208 is monolithic ICs used for driving reversible motors. They allow control of reversible motors in cassette players and other electrical equipment by using TTL-level logic signals. The ICs contain a logic sec...
Vendor:Other Category:Other
The UTCA9849 is ICs developed for CD-ROM spindle motor drives. The UTCA9849 possess a short brake and reverserotation brake for two types of brake functions, and also contain FG output and rotation direction detection (F...
Vendor:Other Category:Other
Vendor:Other Category:Other
The UTCA2804 is a TRIAC controller providing a complete solution for temperature controlled electric panel heaters, cookers, film processing baths etc.Switching occurs at the zero voltage point in order to minimize radio...
Mfg:YW Pack:DIP-8 D/C:03+ Vendor:Other Category:Other
The UTC9106 is a bipolar integrated circuit designed for telephone bell replacement.
Vendor:Other Category:Other
Vendor:Other Category:Other
The UTC8507 is a automatic gain control system that is used for dynamic range compression and expansion.By companding the signal, this can reduce the noise components.The UTC8507 includes compressor, expander, pre-amp, f...
Mfg:UTC Pack:DIP Vendor:Other Category:Other
The UTC8227 is the audio power amplifier with built-in wo channel developed for portable radio cassette tape ecorder with power ON/OFF switch.
Mfg:UTC Pack:ZIP-12 D/C:N/A Vendor:Other Category:Other
UTC8207 is an audio power IC with built-in two channels developed for portable radio cassette tape recorder with power ON/OFF switch.Because of the parts reduction and SIPH (single inline package), space merit is remarka...
Mfg:YW Pack:DIP D/C:07+ Vendor:Other Category:Other
The UTC820 is a monolithic integrated circuit audio amplifier. It is designed for audio frequency Class B amplifiers.
Mfg:UTC Pack:TO23-3 D/C:03+ Vendor:Other Category:Other
The UTC8050S is a low voltage high current small signal NPN transistor, designed for Class B push-pull audio amplifier and general purpose applications.
Vendor:Other Category:Other
The UTC79LXX family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications that required supply current up to 100mA.
Vendor:Other Category:Other
The UTC78LXX series of fixed voltage monolithic integrated circuit voltage regulators are suitable for applications that required supply up to 100mA.
Vendor:Other Category:Other
The UTC78DXXA family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications that required supply current up to 1 A.
Mfg:UT D/C:07+ Vendor:Other Category:Other
UTC7642 is suitable for low voltage portable Radio, cassette system and other wireless AM system. The package of UTC7642 is TO-92.
Vendor:Other Category:Other
The UTC75323 combines five drivers and three receivers. The flow-through design of the UTC 75323 decreases the part count, reduces the board space required, and allows easy interconnection of the UART and serial-port con...
Vendor:Other Category:Other
The UTC7524 provides the necessary features to implement the Electronic BALLAST control and S.M.P.S application for designing active power factor correction circuit
Vendor:Other Category:Other
The UTC75232 is designed as one kind of monolithic IC containing three independent drivers and five receivers which comply with the requirements of the TIA/EIA232-F standards.Features of the UTC75232 are:(1)single chip w...
Vendor:Other Category:Other
The UTC75185 complies with the requirements of the TIA/EIA232-F and ITU (formerly CCITT) v.28 standards.These standards are for data interchange between a host computer and peripheral at signaling rates up to 20kbit/s.Th...
Mfg:YW Pack:TO126 D/C:03+ Vendor:Other Category:Other
The UTC6651 is a monolithic integrated circuit designed for the rotating speed control of a compact DC motor which is used for a tape recorder, recoder player etc.
Mfg:YW Pack:DIP-8 D/C:01+ Vendor:Other Category:Other
The UTC6650 is a monolithic integrated circuit designed for the tape recorder.
Vendor:Other Category:Other
The UTC6610 is a frequency and clock display driver used for displaying FM/AM radio frequency or a 12 hour alarm clock. By using CMOS technology, it consumes very low power in clock display mode.
Vendor:Other Category:Other
The UTC571 is a versatile low cost dual gain control circuit in which either channel may be used as a dynamic range compressor or expandor. Each channel has a fullwave rectifier to detect the average value of the signal,...
Mfg:YW Vendor:Other Category:Other
The UTC51494 is a monolithic bipolar integrate circuit that provides both 494 function and built in power good signalcircuit for easy using 51494 can be easily implemented by just adding a capacitor.
Mfg:YW Pack:DIP-8 D/C:00+ Vendor:Other Category:Other
The UTC4558 is a monolithic integrated circuit designed for dual operational amplifier.
Pack:07+ D/C:TO-92 Vendor:Other Category:Other
The UTC431 is three-terminal adjustable regulator with a guaranteed thermal stability over applicable temperature ranges. The output Voltage may be set to any value between Vref(approximately 2.5V) and 26 V with two exte...
Vendor:Other Category:Other
The UTC4053 are Triple SPDT analog multiplexers for application as digitallycontrolled analog switches.
Pack:534 Vendor:Other Category:Other
The UTC386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 keep the external part count low, but the additional of external resistor and capacitor between pin ...
Mfg:UTC Pack:DIP-8 D/C:05+ Vendor:Other Category:Other
The UTC3563 is a monolithic control circuit containing the primary functions required for DC to DC converters and highside-sensed constant current source. The UTC3563 consists of an internal temperature compensated refer...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.