Features: ·Single chip with easy interface between UART andSerial-Port connector of IBMTM, PC/ATTM and Compatibles. ·Three drivers and five receivers meet or exceed the requirements of TIA/EIA-232-F and ITU v.28 standards.·Designed to support data rates up to 120 kbps ·ESD protection meets or exce...
UTC75185: Features: ·Single chip with easy interface between UART andSerial-Port connector of IBMTM, PC/ATTM and Compatibles. ·Three drivers and five receivers meet or exceed the requirements of TIA/EIA-232-F...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER |
SYMBOL |
VALUE |
UNIT |
Supply voltage (Note 1) |
VDD |
15 |
V |
Supply voltage (Note 1) |
Vss |
-15 |
V |
Supply voltage (Note 1) |
Vcc |
10 |
V |
Input voltage range (DRIVER) |
VI |
-15 to 7 |
V |
Input voltage range (RECEIVER) |
VI |
-30 to 30 |
V |
Driver output voltage range |
Vo |
-15 to 15 |
V |
Receiver low level output current |
Io |
20 |
mA |
Thermal impedance (note 2) SOP-20 DIP-20 |
JA |
97 67 |
/W |
Electrostatic discharge Human-body model: RS-232 pins, class 3, A (note3) Human-body model: All pins, class 3, A (note 4) Machine model: RS-232 pins, class 3, B(note 5) Machine model: All pins, class 3, B (note 4) |
10 5 600 300 |
kV kV V V | |
Storage temperature range |
Tstg |
-65 to +150 |
|
Lead temperature 1.6mm from case for 10 sec |
TL |
260 |
The UTC75185 complies with the requirements of the TIA/EIA232-F and ITU (formerly CCITT) v.28 standards.These standards are for data interchange between a host computer and peripheral at signaling rates up to 20kbit/s.The switching speeds of the UTC 75185 are fast enough to support rates up to 120kbite/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be assured unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates to 120kbit/s, use of ITA/EIA-423-B (ITU v.10) and TIA/EIA-422-B (ITU v.11) standards are recommended.
The UTC75185 is Characterized for operation over the temperature range of 0 to 70.