© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:NS Pack:SMD D/C:O4 Vendor:Other Category:Other
The LM27961 is a charge-pump-based white-LED driver that is ideal for mobile phone display backlighting. It is intended to drive 4 LEDs for a main phone display backlight and 3 LEDs for a sub-display backlight. Regulated...
Vendor:Other Category:Other
The LM2796 is a charge-pump based white-LED driver that is ideal for mobile phone display backlighting. It can drive up to 7 LEDs in parallel with up to 20mA through each LED. Regulated internal current sources deliver e...
Mfg:NS Pack:SMD D/C:O4 Vendor:Other Category:Other
The LM27953 is a charge-pump-based white-LED driver that is ideal for mobile phone display backlighting. It is intended to drive 4 LEDs for a main phone display backlight. Regulated internal current sources deliver excel...
Vendor:Other Category:Other
The LM27952 is a switched capacitor white-LED driver capable of driving up to 4 LEDs with 30mA through each LED. Its 4 tightly regulated current sinks ensure excellent LED current and brightness matching. LED drive curre...
Vendor:Other Category:Other
The LM27951SD is a switched capacitor white-LED driver capable of driving up to 4 LEDs with 30mA through each LED. It provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of...
Vendor:Other Category:Other
The LM27951 is a switched capacitor white-LED driver capable of driving up to 4 LEDs with 30mA through each LED. Its 4 tightly regulated current sources ensure excellent LED current and brightness matching. LED drive cur...
Vendor:Other Category:Other
Vendor:Other Category:Other
The LM2794/95 is a fractional CMOS charge-pump that provides four regulated current sources. It accepts an input voltage range from 2.7V to 5.5V and maintains a constant current determined by an external sense resistor. ...
Vendor:Other Category:Other
The LM2793 is a highly efficient, semi-regulated 1.5x CMOS charge pump that provides dual constant current outputs. The LM2793 has an input voltage range of 2.7V to 5.5V. To control LED brightness, the amount of current ...
Vendor:Other Category:Other
The LM2792 is a CMOS charge-pump voltage doubler and regulator that provides two regulated current sources. They are designed to drive two white (or blue) LEDs with matched currents (within ± 0.3%) to produce balanced li...
Vendor:Other Category:Other
The LM2791 is a CMOS charge-pump voltage doubler and regulator that provides two regulated current sources. TheLM2791 is designed to drive two white (or blue) LEDs with matched currents (within ± 0.3%) to produce balance...
Vendor:Other Category:Other
The LM2788MMX-1.5 is one member of the LM2788 family which is designed as the 120mA high efficiency step-down switched capacitor voltage converter that can be used in (1)cellular phones; (2)pagers; (3)H/PC and P/PC devic...
Vendor:Other Category:Other
The LM2788MM-2.0 switched capacitor step-down DC/DC converter efficiently produces a 120mA regulated low-voltage rail from a 2.6V to 5.5V input. Fixed output voltage options of 1.5V, 1.8V, and 2.0V are available.The LM27...
Vendor:Other Category:Other
The LM2788 switched capacitor step-down DC/DC converter efficiently produces a 120mA regulated low-voltage rail from a 2.6V to 5.5V input. Fixed output voltage options of 1.5V, 1.8V, and 2.0V are available. The LM2788 us...
Vendor:Other Category:Other
The LM2787 CMOS Negative Regulated Switched Capacitor Voltage Inverter delivers a very low noise adjustable output for an input voltage in the range of +2.7V to +5.5V. Four low cost capacitors are used in this circuit to...
Vendor:Other Category:Other
The LM2781 is a charge pump that inverts an input voltage in the range of 1.8V to 5.5V to the corresponding output voltage of -1.8V to -5.5V. With use of three or four low-cost external ceramic capacitors, the LM2781 can...
Vendor:Other Category:Other
The LM2780 is a charge pump that inverts an input voltage in the range of 1.8V to 5.5V to the corresponding outputvoltage of -1.8V to -5.5V. With use of three or four low-cost external ceramic capacitors, the LM2780 can ...
Vendor:Other Category:Other
The LM2770 is a switched capacitor step-down regulator that is ideal for powering low-voltage applications in portable systems. The LM2770 can supply load currents up to 250mA and operates over an input voltage range of ...
Vendor:Other Category:Other
The LM2767 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of +1.8V to +5.5V. Two low cost capacitors and a diode are used in this circuit to provide at least 15 mAof ou...
Vendor:Other Category:Other
The LM2766 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of +1.8V to +5.5V. Two low cost capacitors and a diode are used in this circuit to provide up to 20 mA of outp...
Vendor:Other Category:Other
The LM2765 CMOS charge-pump voltage converter operatesas a voltage doubler for an input voltage in the range of+1.8V to +5.5V. Two low cost capacitors and a diode areused in this circuit to provide up to 20 mA of output ...
Vendor:Other Category:Other
The LM2760 is a switched-capacitor DC/DC converter that generates a regulated 3.3V output capable of driving a load up to 20mA (VIN 2.5V). The wide input voltage range (2.0V-4.4V) allows this device to be powered from s...
Vendor:Other Category:Other
The LM2759SD is an integrated low-noise, high-current switched capacitor DC/DC converter with a regulated current source. The device requires only four small ceramic capacitors making the total solution area less than 22...
Vendor:Other Category:Other
The LM2754 is an integrated low noise, high current switched capacitor DC/DC converter with four regulated current sinks. The device is optimized for driving 1 to 4 high power white LEDs in parallel with a maximum curren...
Vendor:Other Category:Other
The LM2753 is capable of driving a Flash LED with a pulsed current of 400mA at an input voltage of 3.6V. A switched capacitor doubler, the LM2753 provides a regulated 5V output (VOUT) over an input supply range of 3.0V t...
Vendor:Other Category:Other
The LM2751 is a constant frequency switched capacitor charge pump with regulated output voltage options of 4.5V, and 5.0V. Over the input voltage range of 2.8V to 5.5V the LM2751 provides up to 150mA of output current an...
Vendor:Other Category:Other
The LM2750 is a regulated switched-capacitor doubler that produces a low-noise output voltage. The 5.0V output voltage option (LM2750-5.0) can supply up to 120mA of output current over a 2.9V to 5.6V input range, as well...
Vendor:Other Category:Other
The LM2747 is a high-speed synchronous buck regulator controller with a feedback voltage accuracy of ±1%. It can provide simple down conversion to output voltages as low as 0.6V. Though the control section of the IC is r...
Vendor:Other Category:Other
The LM2746 is a high-speed synchronous buck regulator controller with a feedback voltage accuracy of ±1%. It can provide simple down conversion to output voltages as low as 0.6V. Though the control sections of the IC are...
Vendor:Other Category:Other
The LM27458 are high-speed synchronous buck regulator controllers with an accurate feedback voltage accuracy of ±1.5%. It can provide simple down conversion to output voltages as low as 0.6V. Though the control sections ...
Vendor:Other Category:Other
The LM2745/8 are high-speed synchronous buck regulator controllers with an accurate feedback voltage accuracy of ±1.5%. It can provide simple down conversion to output voltages as low as 0.6V. Though the control sections...
Vendor:Other Category:Other
The LM2744 is a high-speed synchronous buck regulator controller with an externally adjustable reference voltage (between 0.5V to 1.5V). It can provide simple down conversion to output voltages as low as 0.5V. Though the...
Vendor:Other Category:Other
The LM2743 is a high-speed synchronous buck regulator controller with an accurate feedback voltage accuracy of ±2%.It can provide simple down conversion to output voltages as low as 0.6V.It senses the low-side switch vol...
Vendor:Other Category:Other
The LM2743 is a high-speed, N-Channel synchronous buck regulator controller with a 2%, 0.6V feedback reference voltage intended to make down conversion from 3.3V to as low as 0.6V easy. A fixed-frequency voltage-mode PWM...
Vendor:Other Category:Other
The LM2742 is a high-speed, synchronous, switching regulator controller. It is intended to control currents of 0.7A to 20A with up to 95% conversion efficiencies. Power up and down sequencing is achieved with the power-g...
Vendor:Other Category:Other
The LM2738 regulator is a monolithic, high frequency, PWM step-down DC/DC converter in an 8-pin LLP or 8-pin eMSOP package. It provides all the active functions for local DC/DC conversion with fast transient response and...
Mfg:NS Vendor:Other Category:Other
The LM2727 and LM2737 are high-speed, synchronous, switching regulator controllers. They are intended to control currents of 0.7A to 20A with up to 95% conversion efficiencies. The LM2727 employs output over-voltage and ...
Vendor:Other Category:Other
The LM2736 regulator is a monolithic, high frequency, PWM step-down DC/DC converter in a 6-pin Thin SOT23 package. It provides all the active functions to provide local DC/DC conversion with fast transient response and a...
Vendor:Other Category:Other
The LM2735 is an easy-to-use, space-efficient 2.1A low-side switch regulator ideal for Boost and SEPIC DC-DC regulation. It provides all the active functions to provide local DC/DC conversion with fast-transient response...
Vendor:Other Category:Other
The LM2734Z regulator is a monolithic, high frequency, PWM step-down DC/DC converter assembled in a 6-pin Thin SOT23 and LLP non pull back package. It provides all the active functions to provide local DC/DC conversion w...
Vendor:Other Category:Other
The LM2734 regulator is a monolithic, high frequency, PWM step-down DC/DC converter in a 6-pin Thin SOT23 package.It provides all the active functions to provide local DC/DC conversion with fast transient response and ac...
Vendor:Other Category:Other
The LM2734 regulator is a monolithic, high frequency, PWM step-down DC/DC converter in a 6-pin Thin SOT23 package. It provides all the active functions to provide local DC/DC conversion with fast transient response a...
Mfg:NS Pack:SOT23-5 D/C:05+ Vendor:Other Category:Other
The LM2733 switching regulators are current-mode boost converters operating fixed frequency of 1.6 MHz ("X" option) and 600 kHz ("Y" option).The use of SOT-23 package, made possible by the minimal power loss of the inter...
Vendor:Other Category:Other
The LM2731XMFX is one member of the LM2731 family which is designed as the 0.6/1.6 MHz boost converter that can be used in wide range of applications such as (1)white LED current source; (2)PDA's and palm-top computers; ...
Mfg:nsc Pack:sot-23 D/C:05+ Vendor:Other Category:Other
The LM2731 switching regulators are current-mode boost converters operating at fixed frequencies of 1.6 MHz ("X" option) and 600 kHz ("Y" option).The use of SOT-23 package, made possible by the minimal power loss of the ...
Vendor:Other Category:Other
The LM2727 and LM2737 are high-speed, synchronous, switching regulator controllers. They are intended to control currents of 0.7A to 20A with up to 95% conversion efficiencies. The LM2727 employs output over-voltage and ...
Mfg:NS Pack:TSSOP-48 D/C:07+ Vendor:Other Category:Other
The LM27262MTDX is a versatile synchronous buck voltage regulator controller designed according to the Intel VRD10 Specification.LM27262MTDX's a fixed-frequency voltage-mode control PWM with average current modulation of...
Mfg:NSC Pack:O121 Vendor:Other Category:Other
The LM27262 is a versatile synchronous buck voltage regulatorcontrollerdesignedaccordingtotheIntelVRD10Speci- fication. It's a fixed-frequency voltagmode control PWM with average current modulation of the reference volta...
Vendor:Other Category:Other
The LM27241 is an adjustable 200kHz-500kHz single channel voltage-mode controlled high-speed synchronous buck regulator controller. It is ideally suited for battery powered applications such as laptop and notebook comput...
Vendor:Other Category:Other
The LM27222 is a dual N-channel MOSFET driver designed to drive MOSFETs in push-pull configurations as typically used in synchronous buck regulators. The LM27222 takes the PWM output from a controller and provides the pr...
Vendor:Other Category:Other
The LM27213 is a single-phase synchronous buck regulator controller designed to fully support a portable microprocessor. On-chip gate drive makes for a compact, single chip solution. Output currents in excess of 25 Amps ...
Vendor:Other Category:Other
The LM2717-ADJ is composed of two PWM DC/DC buck (step-down) converters. Both converters are used to generate an adjustable output voltage as low as 1.267V. Both also feature low RDSON (0.16) internal switches for maximu...
Vendor:Other Category:Other
The LM2717 is composed of two PWM DC/DC buck (stepdown) converters. The first converter is used to generate a fixed output voltage of 3.3V. The second converter is used to generate an adjustable output voltage. Both conv...
Vendor:Other Category:Other
The LM2716 is composed of two PWM DC/DC converters. Abuck (step-down) converter is used to generate a fixed output voltage. A boost (step-up) converter is used to generate an adjustable output voltage. Both converters fe...
Vendor:Other Category:Other
The LM2715 is a compact bias solution for TFT displays. It has a current mode PWM step-up DC/DC converter with a 1.3A, 0.18 internal switch. Capable of generating 8V at 24 mA from a Lithium Ion battery, the LM2715 is ide...
Mfg:NS Pack:SMD Vendor:Other Category:Other
The LM2711 is a compact bias solution for TFT displays. It has a current mode PWM step-up DC/DC converter with a 1.4A, 0.17 internal switch. Capable of generating 8V at 300mA from a Lithium Ion battery, the LM2711 is ide...
Vendor:Other Category:Other
The LM2710 is a compact bias solution for TFT displays. It has a current mode PWM step-up DC/DC converter with a 1.4A, 0.17 internal switch. Capable of generating 8V at 300mA from a Lithium Ion battery, the LM2710 is ide...
Vendor:Other Category:Other
The LM2707 is a magnetic boost regulator specifically designed for white LED drive applications. Tightly regulated LED currents, exceptional LED brightness uniformity, and very high LED-drive power efficiency (>80%) c...
Vendor:Other Category:Other
The LM2706 DC-DC converter is optimized for powering RF power amplifiers (PAs) from a single Lithium-Ion cell. It may also be used in many other applications. It steps down an input voltage from 2.7V to 5.5V to a variabl...
Vendor:Other Category:Other
The LM2705 is a micropower step-up DC/DC in a small 5-lead SOT-23 package. A current limited, fixed off-time control scheme conserves operating current resulting in high efficiency over a wide range of load conditions. T...
Vendor:Other Category:Other
The LM2704 is a micropower step-up DC/DC in a small 5-lead SOT-23 package. A current limited, fixed off-time control scheme conserves operating current resulting in high efficiency over a wide range of load conditions. T...
Vendor:Other Category:Other
The LM2703 is a micropower step-up DC/DC in a small 5-lead SOT-23 package. A current limited, fixed off-time control scheme conserves operating current resulting in high efficiency over a wide range of load conditions. T...
Mfg:NSC Pack:07+/08+ Vendor:Other Category:Other
The LM2702 is a compact bias solution for TFT displays. It has a current mode PWM step-up DC/DC converter with a 2A, 0.2 internal switch. Capable of generating 8V at 170mA from a Lithium Ion battery, the LM2702 is ideal ...
Vendor:Other Category:Other
The LM2700MTX-ADJ is one member of the LM2700 family which designed as one kind of step-up DC/DC converter with a 3.6A, 80mW internal switch and pin selectable operating frequency.It can be used in LCD bias supplies,hand...
Vendor:Other Category:Other
The LM2700 is a step-up DC/DC converter with a 3.6A, 80mW internal switch and pin selectable operating frequency. With the ability to produce 500mA at 8V from a single Lithium Ion battery, the LM2700 is an ideal part for...
Vendor:Other Category:Other
The LM27 is a precision, single digital-output, low-power thermostat comprised of an internal reference, DAC, temperature sensor and comparator. Utilizing factory programming, it can be manufactured with different trip p...
Vendor:Other Category:Other
The LM26LV is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (TTRIP) can be preset at the factory to any temperature in the range of 0°C to 150°C in...
Vendor:Other Category:Other
The LM2698MM-ADJ is one member of the LM2698 family which is designed as the general purpose PWM boost converter that can be used in (1)3.3V to 5V, 5V to 12V conversion; (2)Distributed Power; (3)Set-Top Boxes; (4)DSL Mod...
Vendor:Other Category:Other
The LM2698 is a general purpose PWM boost converter. The 1.9A, 18V, 0.2ohm internal switch enables the LM2698 to provide efficient power conversion to outputs ranging from 2.2V to 17V. It can operate with input voltages ...
Vendor:Other Category:Other
The LM2696 is a pulse width modulation (PWM) buck regulator capable of delivering up to 3A into a load. The control loop utilizes a constant on-time control scheme with input voltage feed forward. This provides a topolog...
Mfg:NSC Pack:SO-8 D/C:06+ Vendor:Other Category:Other
The LM2688 is a low-cost non-synchronous voltage-mode PWM controller which maintains an accurate and adjustableoutput voltage for high current, low voltage DC/DC applications such as the Pentium microprocessor family. By...
Vendor:Other Category:Other
The LM2687 CMOS Negative Regulated Switched Capacitor Voltage Inverter delivers a very low noise adjustable output for an input voltage in the range of +2.7V to +5.5V. Four low cost capacitors are used in this circuit to...
Mfg:N/A Pack:N/A D/C:N/A Vendor:Other Category:Other
The LM2686 CMOS charge-pump voltage converter operates as an input voltage doubler and a +5V regulator for an input voltage in the range of +2.85V to +6.5V. Three low cost capacitors are used in this circuit to provide u...
Vendor:Other Category:Other
The LM2685MTC is one member of the LM2685 family which is designed as the dual output regulated switched capacitor voltage converter that can be used in (1)cellular phones; (2)pagers; (3)PDAs; (4)handheld instrumentation...
Mfg:NSC Pack:07+/08+ Vendor:Other Category:Other
The LM2685 CMOS charge-pump voltage converter operates as an input voltage doubler, +5V regulator and inverter for an input voltage in the range of +2.85V to +6.5V. Five low cost capacitors are used in this circuit to pr...
Vendor:Other Category:Other
The LM2682 is a CMOS charge-pump voltage inverter capable of converting positive voltage in the range of +2.0V to +5.5V to the corresponding doubled negative voltage of −4.0V to −11.0V respectively. The LM268...
Vendor:Other Category:Other
The LM2681M6 is one member of the LM2681 family.The LM2681 CMOS charge-pump voltage converter peratesasavoltagedoublerforaninputvoltageintherangeof+2.5V to +5.5V. Two low cost capacitors and a diode(needed during start-u...
Vendor:Other Category:Other
The LM2681 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of +2.5V to +5.5V. Two low cost capacitors and a diode (needed during start-up) is used in this circuit to pro...
Vendor:Other Category:Other
The LM2679S-ADJ is one member of the LM2679 family which is designed as the SIMPLE SWITCHER power converter high efficiency 5 A step-down voltage regulator that can be used in (1)simple to design, high efficiency (>90...
Vendor:Other Category:Other
The LM2679 series of regulators are monolithic integrated circuits which provide all of the active functions for a step-down (buck) switching regulator capable of driving up to 5A loads with excellent line and load regul...
Vendor:Other Category:Other
The LM2678S-ADJ is one member of the LM2678 family which is designed as the SIMPLE SWITCHER power converter high efficiency 5 A step-down voltage regulator that can be used in (1)simple to design, high efficiency (>90...
Vendor:Other Category:Other
The LM2678S-5.0 is designed as one kind of high efficiency 5A step-down voltage regulator that can be used in (1)Simple to design, high efficiency (>90%) step-down switching regulators; (2)Efficient system pre-regulat...
Mfg:NSC Pack:N/A D/C:09+ Vendor:Other Category:Other
Vendor:Other Category:Other
The LM2677 series of regulators are monolithic integrated circuits which provide all of the active functions for a stepdown (buck) switching regulator capable of driving up to 5A loads with excellent line and load regula...
Vendor:Other Category:Other
The LM2676T-ADJ is a kind of voltage regulator. It is a monolithic integrated circuit to provide all of the active functions for a stepdown (buck) switching regulator. It is an adjustable output version. The typical appl...
Vendor:Other Category:Other
The LM2676S-5.0 is designed as one kind of high efficiency 3A step-down voltage regulator that can be used in (1)Simple to design, high efficiency (>90%) step-down switching regulators; (2)Efficient system pre-regulat...
Vendor:Other Category:Other
The LM2676S-3.3 is one member of the LM2676 family which is designed as the SIMPLE SWITCHER power converter high efficiency 3 A step-down voltage regulator that can be used in (1)simple to design, high efficiency (>90...
Mfg:NS D/C:00+ Vendor:Other Category:Other
The LM2676 series of regulators are monolithic integrated circuits which provide all of the active functions for a step- down (buck) switching regulator capable of driving up to 3A loads with excellent line and load regu...
Mfg:NS Pack:DIP Vendor:Other Category:Other
The LM2675N-ADJ series of regulators are monolithi cintegrated circuits built with a LMDMOS process.These regulators provide all the active functions for astep-down (buck) switchin regulator,capable of driving a 1A load ...
Vendor:Other Category:Other
The LM2675N-12 series of regulators are monolithic integrated circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down switching regulator, capable of driving a 1A load curr...
Vendor:Other Category:Other
The LM2675MX-5.0 belongs to the LM2675 series which designed as one kind of 1A step-down voltage regulator that provides all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load c...
Vendor:Other Category:Other
The LM2675-5.0 is one member of the LM2675 family which is designed as the SIMPLE SWITCHER power converter high efficiency 500 mA step-down voltage regulator that can be used in (1)simple to design, high efficiency (>...
Mfg:NSC Pack:N/A D/C:09+ Vendor:Other Category:Other
Vendor:Other Category:Other
The LM2674M-ADJ is a series of regulators which are monolithic integrated circuits built with a LMDMOS process. They provide all the active functions for a step-down (buck)switching regulator and can drive a 500 mA load ...
Vendor:Other Category:Other
The LM2674-3.3 is one member of the LM2674 family which is designed as the SIMPLE SWITCHER power converter high efficiency 500 mA step-down voltage regulator that can be used in (1)simple to design, high efficiency (>...
Mfg:NSC Pack:DIP D/C:26 Vendor:Other Category:Other
The LM2674 series of regulators are monolithic integrated circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 500 mAloa...
Vendor:Other Category:Other
The LM2673S-5.0 is designed as one kind of high efficiency 3A step-down voltage regulator that can be used in (1)Simple to design, high efficiency (>90%) step-down switching regulators; (2)Efficient system pre-regulat...
Vendor:Other Category:Other
The LM2673S-3.3 is one member of the LM2673 family which is designed as the SIMPLE SWITCHER® 3A step-down voltage regulator with adjustable current limit that can be used in (1)simple to design, high efficiency (>...
Vendor:Other Category:Other
Mfg:NS Pack:DIP Vendor:Other Category:Other
The LM2672N-ADJ series of regulators are monolithi cintegrated circuits built with a LMDMOS process.These regulators provide all the active functions for astep-down (buck) switchin regulator,capable of driving a 1A load ...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.