Features: Doubles Input Supply VoltageSOT23-6 Package20 Typical Output Impedance90% Typical Conversion Efficiency at 20 mA0.1µA Typical Shutdown CurrentApplicationCellular PhonesPagersPDAsOperational Amplifier Power SuppliesInterface Power SuppliesHandheld InstrumentsSpecificationsSupply Vol...
LM2765: Features: Doubles Input Supply VoltageSOT23-6 Package20 Typical Output Impedance90% Typical Conversion Efficiency at 20 mA0.1µA Typical Shutdown CurrentApplicationCellular PhonesPagersPDAsOper...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Output Current | 20 mA |
Input Min Voltage | 1.8 Volt |
Input Max Voltage | 5.5 Volt |
Switching Frequency | 50 kHz |
On/Off Pin | Yes |
Efficiency (peak) | 90 % |
Error Flag | No |
Sync Pin | No |
Adj Switch Frequency | No |
Adjustable Output | No |
Inverting | No |
Step-Up | Yes |
Step-Down | No |
RegType | Switched Capacitor |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
Topology | Charge Pump |
View Using Catalog |
The LM2765 CMOS charge-pump voltage converter operatesas a voltage doubler for an input voltage in the range of+1.8V to +5.5V. Two low cost capacitors and a diode areused in this circuit to provide up to 20 mA of output current.
The LM2765 operates at 50 kHz switching frequency to reduceoutput resistance and voltage ripple. With an operating current of only 130 µA (operating efficiency greater than 90%with most loads) and 0.1µA typical shutdown current, theLM2765 provides ideal performance for battery poweredsystems. The device is manufactured in a SOT-23-6 package.
The LM2765 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of +1.8V to +5.5V. Two low cost capacitors and a diode are used in this circuit to provide up to 20 mA of output current.
The LM2765 operates at 50 kHz switching frequency to reduce output resistance and voltage ripple. With an operating current of only 130 µA (operating efficiency greater than 90% with most loads) and 0.1µA typical shutdown current, the LM2765 provides ideal performance for battery powered systems. The device is manufactured in a SOT-23-6 package.
Reliability Metrics
Part Number | Process | EFR Reject | EFR Sample Size | PPM | LTA Rejects | LTA Device Hours | FITS | MTTF (Hours) |
LM2765M6 | ABCD150 | 0 | 31520 | 0 | 0 | 3739000 | 1 | 1060951459 |
LM2765M6X | ABCD150 | 0 | 31520 | 0 | 0 | 3739000 | 1 | 1060951459 |