Features: ·Drives up to 7 LEDs with up to 20mA each·LEDs controlled in 2 Distinct Groups, for Backlighting 2 Displays (main LCD and sub-LCD)·Excellent Current and Brightness Matching·High-Efficiency 3/2x Charge Pump·Extended Li-Ion Input: 2.7V to 5.5V·PWM Brightness Control: 100Hz - 1kHz·18-bump T...
LM2796: Features: ·Drives up to 7 LEDs with up to 20mA each·LEDs controlled in 2 Distinct Groups, for Backlighting 2 Displays (main LCD and sub-LCD)·Excellent Current and Brightness Matching·High-Efficiency...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Regulated LEDs | 7 |
Total LED Current | 140 mA |
Current Matching | 1% |
Boost Type | Switched Capacitor 1.5x |
Switching Frequency | 500 kHz |
Efficiency (peak) | 80 % |
Input Min Voltage | 2.7 Volt |
Input Max Voltage | 5.5 Volt |
Boost Voltage | Unregulated |
LED Configuration | Parallel |
Supply Current | 3.5 mA |
Switching Type | Fixed Freq |
Special Features | LEDs controlled in 2 groups: 3 and 4 LEDs; softstart |
PWM BrightCtrl | Yes |
Analog-V BrightCtrl | No |
Ambient Light Compensation | No |
RGB-LED | No |
Temperature Min | -30 deg C |
Temperature Max | 85 deg C |
RegType | WhiteLED Driver |
PowerWise | Yes |
View Using Catalog |
The LM2796 is a charge-pump based white-LED driver that is ideal for mobile phone display backlighting. It can drive up to 7 LEDs in parallel with up to 20mA through each LED. Regulated internal current sources deliver excellent current and brightness matching in all LEDs. The LED-driver current sources are split into two independently controlled groups. The primary group (4 LEDs) can be used to backlight the main phone display. The second group (3 LEDs) can be used to backlight a secondary display or to provide other lighting features (keypad LEDs, for example). Brightness of the two groups can be adjusted independently with pulsewidth modulated (PWM) digital signals.
The LM2796 works off an extended Li-Ion input voltage range (2.7V to 5.5V). Voltage boost is achieved with a highefficiency 3/2x-gain charge pump.
The LM2796 is available in National's chip-scale 18-bump micro SMD package.