© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The MAX3643 is designed as one kind of 155Mbps to 2.5Gbps burst-mode laser driver device that can be used in (1)A/B/G/XGPON ONT Modules Up to 2.5Gbps; (2)1.25Gbps IEEE EPON ONT Modules applications. And this device is pa...
Pack:MAX D/C:BGA Vendor:Other Category:Other
The MAX3640 is a dual-path crosspoint switch for use at OC-12 data rates. The MAX3640 can be used to receive and transmit 622Mbps low-voltage differentialsignals (LVDS) across a backplane with minimum jitter accumulation...
Mfg:MAX Pack:SOP-16 D/C:04/05 Vendor:Other Category:Other
The MAX364/MAX365 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX364 has four normally closed (NC), and the MAX365 has four normally open (NO) switches. Both parts offer lowchannel on resist...
Vendor:Other Category:Other
The MAX3634 burst-mode clock phase aligner (CPA) is designed specifically for 622Mbps or 1244Mbps GPON (ITU G.984) optical line terminal (OLT) receiver applications. The MAX3634 provides clock and clock-aligned resynchro...
Vendor:Other Category:Other
The MAX3620 series is a family of high-performance passive delay lines for use in QDR/QDRII synchronous memory systems. These delay lines support high-speed transceiver logic (HSTL) source terminated transmission with an...
Mfg:MAX Pack:SOP-16 D/C:05 Vendor:Other Category:Other
The MAX361/MAX362 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX361 has four normally closed (NC) switches, and the MAX362 has four normally open (NO) switches. Both parts offer low channel...
Mfg:MAX Pack:SOP-16 D/C:05 Vendor:Other Category:Other
The MAX361/MAX362 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX361 has four normally closed (NC) switches, and the MAX362 has four normally open (NO) switches. Both parts offer low channel...
Vendor:Other Category:Other
The MAX3573 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...
Vendor:Other Category:Other
The MAX3571 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...
Vendor:Other Category:Other
The MAX3570 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...
Vendor:Other Category:Other
The MAX3553 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...
Vendor:Other Category:Other
The MAX3551 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...
Vendor:Other Category:Other
The MAX3550 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...
Vendor:Other Category:Other
The MAX354/MAX355 fault-protected multiplexers (muxes) use a series N-channel, P-channel, N-channel structure that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, powerdown, and f...
Vendor:Other Category:Other
The MAX3540 complete single-conversion television tuner is designed for use in analog/digital terrestrial applications and digital set-top boxes. This television tuner draws only 760mW of power from a +3.3V supply voltag...
Vendor:Other Category:Other
The MAX354/MAX355 fault-protected multiplexers (muxes) use a series N-channel, P-channel, N-channel structure that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, powerdown, and f...
Vendor:Other Category:Other
The MAX3537/MAX3538 broadband RF variable-gain amplifiers (VGA) are designed for digital and OpenCable™ set-tops and televisions. These devices feature a unique design that integrates a dual-band (UHF and VHF) inpu...
Vendor:Other Category:Other
The MAX3537/MAX3538 broadband RF variable-gain amplifiers (VGA) are designed for digital and OpenCable™ set-tops and televisions. These MAX3537 feature a unique design that integrates a dual-band (UHF and VHF) inpu...
Vendor:Other Category:Other
The MAX3535E/MXL1535E isolated RS-485/RS-422 full duplex transceivers provide 2500VRMS of galvanic isolation between the RS-485/RS-422 side and the processor or control logic side. These devices allow fast,1000kbps commu...
Vendor:Other Category:Other
The MAX3532 is a programmable power amplifier for use in upstream cable applications. The device outputs up to 62dBmV (continuous wave) through a 1:2 (voltage ratio) transformer when driven with 36dBmV at its input. MAX3...
Vendor:Other Category:Other
The MAX353 are precision, quad,single-pole single-throw (SPST) analog switches. The MAX351 has four normally closed (NC), and the MAX352 has four normally open (NO) switches. The MAX353 has two NO and two NC switches. Al...
Vendor:Other Category:Other
The MAX3524 broadband amplifier is designed specifically for cable television receiver and cable modem applications. The MAX3524 is a single-ended input, differential- output low-noise amplifier (LNA) that offers 15dB of...
Vendor:Other Category:Other
The MAX352 are precision, quad,single-pole single-throw (SPST) analog switches. The MAX351 has four normally closed (NC), and the MAX352 has four normally open (NO) switches. The MAX353 has two NO and two NC switches. Al...
Mfg:MAXIM Pack:SO D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SWITCH QUAD SPST 16SOICThe MAX351ESE are precision, quad,single-pole single-throw (SPST) analog switches. The MAX351ESE has four normally closed (NC), and the MAX352 has four normally open (NO) switches. The MAX353 has two NO and two NC switch...
Mfg:MAX Pack:SMD D/C:O1/O2 Vendor:Other Category:Other
The MAX3514/MAX3516/MAX3517 programmable-gain amplifiers are designed for use in CATV upstream applications. The MAX3514/MAX3517 drive up to +61dBmV (QPSK) into a 75 load when driven with a +34dBmV nominal input signal. ...
Mfg:MAX Pack:SMD Vendor:Other Category:Other
The MAX3514/MAX3516/MAX3517 programmable-gain amplifiers are designed for use in CATV upstream applications. The MAX3514/MAX3517 drive up to +61dBmV (QPSK) into a 75 load when driven with a +34dBmV nominal input signal. ...
Mfg:MAX Pack:SMD Vendor:Other Category:Other
The MAX3514/MAX3516/MAX3517 programmable-gain amplifiers are designed for use in CATV upstream applications. The MAX3514/MAX3517 drive up to +61dBmV (QPSK) into a 75 load when driven with a +34dBmV nominal input signal. ...
Mfg:MAXIM Pack:SOP D/C:09+ Vendor:Other Category:Other
The MAX3510 is a programmable power amplifier for use in CATV upstream applications. The device outputs up to 64dBmV (continuous wave) through a 2:1 (voltage ratio) transformer. It features variable gain controlled by a ...
Vendor:Other Category:Other
The MAX3509QL3BB is one member of the MAX3509 family which is designed as the programmable power amplifier that can be used in (1)Telephony over Cable ; (2)CATV Status Monitor; (3)OPENCATV Set-Top Box ; (4)CATV Infrastru...
Vendor:Other Category:Other
The MAX3509 is a programmable power amplifier for use in CATV upstream applications. The device outputs up to 66dBmV QPSK through a 1:1 transformer. It features variable gain controlled by a 3-wire digital serial bus. Ga...
Vendor:Other Category:Other
The MAX3507 is a variable-gain power amplifier for use in CATV upstream transmitters. The variable-gain feature has 55dB of dynamic range and is controlled by a 3-wire SPI™ bus. The MAX3507 is capable of generating...
Vendor:Other Category:Other
The MAX3503/MAX3505 evaluation kits (EV kits) simplify evaluation of the MAX3503 and MAX3505 CATV upstream amplifiers. The kits include a data interface that can be programmed through the parallel port of a standard PC.S...
Mfg:MAX D/C:O2 Vendor:Other Category:Other
The MAX3503/MAX3505 evaluation kits (EV kits) simplify evaluation of the MAX3503 and MAX3505 CATV upstream amplifiers. The kits include a data interface that can be programmed through the parallel port of a standard PC.S...
Mfg:MAXIM Pack:SSOP D/C:8 Vendor:Other Category:Other
The MAX349/MAX350 are 8-channel and dual 4-channel serially controlled multiplexers (muxes). These muxes conduct equally well in either direction. On-resistance (100½ max) is matched between switches to 16½...
Mfg:MAXIM Pack:02+ D/C:SOP-14 Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...
Mfg:SOP-14 Pack:MAXIM D/C:0210+ Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...
Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...
Mfg:MAX Pack:SOP-8 D/C:05 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...
Mfg:MAXIM Pack:SSOP D/C:8 Vendor:Other Category:Other
The MAX349/MAX350 are 8-channel and dual 4-channel serially controlled multiplexers (muxes). These muxes conduct equally well in either direction. On-resistance (100½ max) is matched between switches to 16½...
Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...
Mfg:MAX Pack:DIP8 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...
Mfg:DIP Pack:MAXIM D/C:04+ Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...
Mfg:MAX Pack:SOP-8 D/C:05 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...
Mfg:MAX Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each MAX3485E contains one driver and o...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TXRX RS485/422 250KBPS 8-DIPThe MAX3485CPA+ is one member of the MAX3485 family which is designed as the 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver that can be used in (1)low-power RS-485/RS-422 transceivers; (2)telec...
Vendor:Other Category:Other
The MAX3485CPA is designed as one kind of 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver that can be used in (1)low-power RS-485/RS-422 transceivers; (2)telecommunications; (3)transceivers for ...
Mfg:MAX Pack:SOP-8 D/C:04/05 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...
Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TXRX RS485/422 250KBPS 8-SOICThe MAX3483CSA+T is one member of the MAX3483 family which is designed as the 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver that can be used in (1)low-power RS-485/RS-422 transceivers; (2)tele...
Mfg:MAX Pack:SOP-8 D/C:04 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...
Vendor:Other Category:Other
The MAX3480EB are electrically isolated RS-485/RS-422 data-communications interfaces. The RS-485/RS-422 I/O pins are protected against ±15kV electrostatic discharge (ESD) shocks, without latchup.Transceivers, optocoupler...
Vendor:Other Category:Other
The MAX3480EA are electrically isolated RS-485/RS-422 data-communications interfaces. The RS-485/RS-422 I/O pins are protected against ±15kV electrostatic discharge (ESD) shocks, without latchup.Transceivers, optocoupler...
Vendor:Other Category:Other
The MAX3480A/MAX3480B are electrically isolated RS-485/RS-422 data-communications interfaces.Transceivers, optocouplers, and a transformer are all included in one low-cost, 28-pin DIP package. A single+3.3V supply on the...
Vendor:Other Category:Other
The MAX3471 half-duplex transceiver is intended for lithium battery-powered RS-485/RS-422 applications. It draws only 1.6µA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disab...
Vendor:Other Category:Other
The MAX3469 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3469 complies with the P...
Vendor:Other Category:Other
The MAX3468 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3468 complies with the P...
Vendor:Other Category:Other
The MAX3467 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3467 complies with the P...
Vendor:Other Category:Other
The MAX3466 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3466 complies with the P...
Vendor:Other Category:Other
The MAX3465 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3465 complies with the P...
Vendor:Other Category:Other
The MAX3464 are high-speed differential bus transceivers for RS-485 and RS-422 communications. MAX3464 are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver complies with the Profib...
Vendor:Other Category:Other
The MAX3460MAX3464 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3460MAX3464 compl...
Vendor:Other Category:Other
The MAX3453EMAX3456E ±15kV ESD-protected USBcompliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds....
Vendor:Other Category:Other
The MAX3453E_1280213 ±15kV ESD-protected USB- compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speed...
Vendor:Other Category:Other
The MAX3453EMAX3456E ±15kV ESD-protected USBcompliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds....
Mfg:MAXIM Vendor:Other Category:Other
The MAX3450E/MAX3451E/MAX3452E USB-compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds. The MAX3...
Mfg:MAXIM Vendor:Other Category:Other
The MAX3450E/MAX3451E/MAX3452E USB-compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds. The MAX3...
Mfg:MAXIM Vendor:Other Category:Other
The MAX3450E/MAX3451E/MAX3452E USB-compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds. The MAX3...
Vendor:Other Category:Other
The MAX3440EMAX3444E fault-protected RS-485 and J1708 transceivers feature ±60V protection from signal faults on communication bus lines. Each device contains one differential line driver with three-state output and one ...
Vendor:Other Category:Other
The MAX3442E fault-protected RS-485 and J1708 transceivers feature ±60V protection from signal faults on communication bus lines. Each device contains one differential line driver with three-state output and one differen...
Vendor:Other Category:Other
The MAX3441E fault-protected RS-485 and J1708 transceivers feature ±60V protection from signal faults on communication bus lines. Each device contains one differential line driver with three-state output and one differen...
Vendor:Other Category:Other
The MAX3440EMAX3444E fault-protected RS-485 and J1708 transceivers feature ±60V protection from signal faults on communication bus lines. Each device contains one differential line driver with three-state output and one ...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TXRX RS-485 3.3V 8-SOICThe MAX3430CSA+ is one member of the MAX3430 series.The MAX3430 fault-protected RS-485 transceiver features ±80V protection from overvoltage signal faults on communication bus lines. Each device contains one driver and o...
Vendor:Other Category:Other
The MAX3430 fault-protected RS-485 transceiver features ±80V protection from overvoltage signal faults on communicationm bus lines. Each device contains one driver and one receiver, and the output pins can withstand faul...
Vendor:Other Category:Other
The MAX3420E contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral compliant to USB specification rev 2.0. A built-in full-speed transceiver features ±15kV ESD protection and ...
Vendor:Other Category:Other
The MAX3406/MAX3407/MAX3408 are general-purpose line-terminating networks designed to change the termination value of a line, depending on the state of a digital control line, allowing the connection to a coaxial cable o...
Vendor:Other Category:Other
The MAX3406/MAX3407/MAX3408 are general-purpose line-terminating networks designed to change the termination value of a line, depending on the state of a digital control line, allowing the connection to a coaxial cable o...
Vendor:Other Category:Other
The MAX3406/MAX3407/MAX3408 are general-purpose line-terminating networks designed to change the termination value of a line, depending on the state of a digital control line, allowing the connection to a coaxial cable o...
Vendor:Other Category:Other
The MAX3397E features a shutdown mode that reduces supply current to less than 1A, thermal short-circuit protection, and ±15kV ESD protection on the VCC side for greater protection in applications that route signals exte...
Vendor:Other Category:Other
The MAX3394E/MAX3395E/MAX3396E bidirectional level translators provide level shifting required for data transfer in a multivoltage system. Internal slew-rate enhancement circuitry features 10mA current-sink and 15mA curr...
Vendor:Other Category:Other
The MAX3394E/MAX3395E/MAX3396E bidirectional level translators provide level shifting required for data transfer in a multivoltage system. Internal slew-rate enhancement circuitry features 10mA current-sink and 15mA curr...
Vendor:Other Category:Other
The MAX3394E/MAX3395E/MAX3396E bidirectional level translators provide level shifting required for data transfer in a multivoltage system. Internal slew-rate enhancement circuitry features 10mA current-sink and 15mA curr...
Vendor:Other Category:Other
The MAX3372EMAX3379E and MAX3390EMAX3393E ±15kV ESD-protected level translators provide the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic...
Vendor:Other Category:Other
The MAX3372EMAX3379E and MAX3390EMAX3393E ±15kV ESD-protected level translators provide the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic...
Mfg:MAX Pack:SOP-16 D/C:05 Vendor:Other Category:Other
The MAX338/MAX339 are monolithic, CMOS analog multiplexers (muxes). The 8-channel MAX338 is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual, 4-channel MAX339 is d...
Vendor:Other Category:Other
The MAX3388E/MAX3389E are 2.5V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with low power requirements, high data-rate capabilities, and enhanced electrostatic discharge (ESD) protection. They have two re...
Vendor:Other Category:Other
The MAX3388E/MAX3389E are 2.5V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with low power requirements, high data-rate capabilities, and enhanced electrostatic discharge (ESD) protection. The MAX3388E/MAX...
Vendor:Other Category:Other
The MAX3387EEUG-T belongs to MAX3387E 3V powered EIA/TIA-232 and V.28/V.24 family which is a communications interface with low power require ments, high data-rate capabilities, and enhanced electrostatic discharge (ESD) ...
Mfg:MAXIM Pack:SMD D/C:06+ Vendor:Other Category:Other
The MAX3387E 3V powered EIA/TIA-232 and V.28/V.24 is a communications interface with low power requirements, high data-rate capabilities, and enhanced electrostatic discharge (ESD) protection. The MAX3387E has three rece...
Mfg:MAX Pack:SSOP Vendor:Other Category:Other
The MAX3386E 3V-powered EIA/TIA-232 and V.28/V.24 is a communications interface with low power requirements,high data-rate capabilities, and enhanced electrostatic discharge (ESD) protection. The MAX3386E has two receive...
Mfg:MAXIM Pack:TSSOP D/C:8 Vendor:Other Category:Other
The MAX3384E is a 3V-powered EIA/TIA-232 and V.28/V.24 communications interface with low power requirements, high data-rate capabilities, and en hanced electrostatic discharge (ESD) protection. All transmitter outputs an...
Vendor:Other Category:Other
The MAX3380E/MAX3381E are +2.35V to +5.5V-powered EIA/TIA-232 and V.28/V.24 communication interfaces with low power requirements, high data-rate capabilities, and enhanced electrostatic discharge (ESD) protection on both...
Vendor:Other Category:Other
The MAX3380E/MAX3381E are +2.35V to +5.5V-powered EIA/TIA-232 and V.28/V.24 communication interfaces with low power requirements, high data-rate capabilities, and enhanced electrostatic discharge (ESD) protection on both...
Mfg:MAX Pack:SOP-16 D/C:04 Vendor:Other Category:Other
The MAX338/MAX339 are monolithic, CMOS analog multiplexers (muxes). The 8-channel MAX338 is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual, 4-channel MAX339 is d...
Vendor:Other Category:Other
The MAX3372EMAX3379E and MAX3390EMAX3393E ±15kV ESD-protected level translators provide the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic...
Vendor:Other Category:Other
The MAX3372EMAX3379E and MAX3390EMAX3393E ±15kV ESD-protected level translators provide the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic...
Vendor:Other Category:Other
The MAX3370/MAX3371 logic level translators are ideal for applications interfacing low-voltage devices to other logic levels. Externally applied voltages set the logic levels of the MAX3370/MAX3371. The devices accept VC...
Vendor:Other Category:Other
The MAX3370/MAX3371 logic level translators are ideal for applications interfacing low-voltage devices to other logic levels. Externally applied voltages set the logic levels of the MAX3370/MAX3371. The devices accept VC...
Vendor:Other Category:Other
The MAX3362 low-power, high-speed transceiver for RS-485/RS-422 communication operates from a single +3.3V power supply. The device contains one differential transceiver consisting of a line driver and receiver. The tran...
Vendor:Other Category:Other
The MAX336/MAX337 are monolithic, CMOS analog multiplexers (muxes). The 16-channel MAX336 is designed to connect one of 16 inputs to a common out- put by control of a 4-bit binary address. The dual, 8-channel MAX337 is d...
Vendor:Other Category:Other
The MAX3355EEUD is designed as one kind of ±15kV ESD-protected USB on-the-go charge pump and comparator device that can be used in wide range of applications such as (1)Cell Phones; (2)MP3 Players; (3)PDAs; (4)Digital Ca...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.