© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC MUX&SW ANLG CMOS LV 10-UMAXThe MAX4525EUB is one member of the MAX4525 family which is designed as the low-voltage, single-supply multiplexer and switch that can be used in (1)battery-operated equipment; (2)audio and video signal routing; (3)low-v...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC MUX&SW ANLG LV CMOS 10-UMAXThe MAX4525CUB is one member of the MAX4525 family which is designed as the low-voltage, single-supply multiplexer and switch that can be used in (1)battery-operated equipment; (2)audio and video signal routing; (3)low-v...
Mfg:MAXIM Pack:06+ D/C:1366 Vendor:Other Category:Other
The MAX4524/MAX4525 are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer (MAX4524) and a double pole/double-throw (DPDT) switch (MAX4525). Both have an inhibit inp...
Vendor:Other Category:Other
The MAX4524L/MAX4525L are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer (MAX4524L) and a doublepole/ double-throw (DPDT) switch (MAX4525L). The MAX4524L/MAX4525L have...
Vendor:Other Category:Other
The MAX4524/MAX4525 are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer (MAX4524) and a double pole/double-throw (DPDT) switch (MAX4525). Both have an inhibit inp...
Mfg:MAX Pack:SOP-16 D/C:05 Vendor:Other Category:Other
The MAX4521/MAX4522/MAX4523 are quad, low-voltage,single-pole/single-throw (SPST) analog switches.On-resistance (100½ max) is matched between switches to 4½ max, and is flat (12½ max) over the specif...
Mfg:MAXIM D/C:06+ Vendor:Other Category:Other
The MAX4521/MAX4522/MAX4523 are quad, low-voltage,single-pole/single-throw (SPST) analog switches.On-resistance (100½ max) is matched between switches to 4½ max, and is flat (12½ max) over the specif...
Mfg:MAX Pack:SOP-16 D/C:04 Vendor:Other Category:Other
The MAX4521/MAX4522/MAX4523 are quad, low-voltage,single-pole/single-throw (SPST) analog switches.On-resistance (100½ max) is matched between switches to 4½ max, and is flat (12½ max) over the specif...
Vendor:Other Category:Other
The MAX4510/MAX4520 single-pole/single-throw (SPST),fault-protected analog switches feature a fault-protected input and Rail-to-Rail®signal-handling capability. Thenormally open (NO) and normally closed (NC) termin...
Vendor:Other Category:Other
The MAX4518/MAX4519 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 100½), which is matched to within 4 between channels and remains flat over the specified analog signal...
Mfg:MAXIM Pack:SOP14S D/C:2007+ Vendor:Other Category:Other
The MAX4518/MAX4519 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 100½), which is matched to within 4 between channels and remains flat over the specified analog signal...
Vendor:Other Category:Other
The MAX4516/MAX4517 are single-pole/single-throw (SPST), CMOS, low-voltage, dual-supply analog switch- es with very low switch on-resistance. The MAX4516 is normally open (NO). The MAX4517 is normally closed (NC).
These...
Mfg:MAXIM Pack:SOT23-5 D/C:2004 Vendor:Other Category:Other
The MAX4516/MAX4517 are single-pole/single-throw (SPST), CMOS, low-voltage, dual-supply analog switch- es with very low switch on-resistance. The MAX4516 is normally open (NO). The MAX4517 is normally closed (NC).
These...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SWITCH SPST 8DIPThe MAX4515CPA is one member of the MAX4515 family which is designed as the single-pole/single-throw (SPST), CMOS, low-voltage, single-supply analog switch that can be used in (1)battery-operated equipment; (2)audio and ...
Vendor:Other Category:Other
V+...........................................................................-0.3V, +13VVoltage into Any Terminal (Note 1).............-0.3V to (V+ + 0.3V)or ±20mA (whichever occurs first)Continuous Current into Any Term...
Mfg:MAX D/C:01+ Vendor:Other Category:Other
V+...........................................................................-0.3V, +13VVoltage into Any Terminal (Note 1).............-0.3V to (V+ + 0.3V)or ±20mA (whichever occurs first)Continuous Current into Any Term...
Vendor:Other Category:Other
The MAX4511/MAX4512/MAX4513 are quad, singlepole/ single-throw (SPST), fault-protected analog switches. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-...
Mfg:MAXIM Vendor:Other Category:Other
The MAX4511/MAX4512/MAX4513 are quad, singlepole/ single-throw (SPST), fault-protected analog switches. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-...
Vendor:Other Category:Other
The MAX4511/MAX4512/MAX4513 are quad, singlepole/ single-throw (SPST), fault-protected analog switches. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-...
Vendor:Other Category:Other
The MAX4510/MAX4520 single-pole/single-throw (SPST),fault-protected analog switches feature a fault-protected input and Rail-to-Rail®signal-handling capability. Thenormally open (NO) and normally closed (NC) termin...
Vendor:Other Category:Other
The MAX450CJD video amplifier is designed to buffer and amplifysignals from DC through 10MHz.This monolithic CMOS amplifier has a high impedance CMOS input,while the output can drive 75 ohm loads to greater than ±2V outp...
Vendor:Other Category:Other
The MAX4508/MAX4509 are 8-to-1 and dual 4-to-1 faultprotected multiplexers that are pin-compatible with the industry-standard DG508/DG509. The MAX4508/ MAX4509 operate with dual supplies of ±4.5V to ±20V or a single supp...
Mfg:MAXIM Pack:05+ D/C:SMD Vendor:Other Category:Other
The MAX4508/MAX4509 are 8-to-1 and dual 4-to-1 faultprotected multiplexers that are pin-compatible with the industry-standard DG508/DG509. The MAX4508/ MAX4509 operate with dual supplies of ±4.5V to ±20V or a single supp...
Mfg:MAXIM Pack:SOP D/C:07/08+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The MAX4505 is a single signal-line protector featuring a fault-protected input and Rail-to-Rail® signal handling capability. The input is protected from overvoltage faults up to ±36V with power on or ±40V with power...
Vendor:Other Category:Other
The MAX4503/MAX4504 are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The MAX4503 is normally open(NO).the MAX4504is normally closed (NC). These CMOS switches MAX4504 can ope...
Vendor:Other Category:Other
Mfg:MAXIM Pack:SOT D/C:05+ Vendor:Other Category:Other
Mfg:Maxim Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SWITCH SPST 8SOIC
Mfg:Maxim Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SWITCH SPST 8DIP
Mfg:MAXIM Pack: SOT D/C:8 Vendor:Other Category:Other
Mfg:MAXIM Pack: PDIP D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SW DUAL ANLG CMOS SPST 8-SOIC
Mfg:MAXIM Pack: DICE D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SW DUAL ANLG CMOS SPST 8-DIP
Mfg:MAXIM D/C:8 Vendor:Other Category:Other
Mfg:MAX Pack:SOP-8 D/C:08+ Vendor:Other Category:Other
The MAX4503/MAX4504 are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The MAX4503 is normally open(NO).the MAX4504is normally closed (NC). The MAX4503 can operate continuousl...
Mfg:MAXIM Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The MAX4501/MAX4502 are single-pole/single-throw(SPST), low-voltage, single-supply, CMOS analog switches. The MAX4501 is normally open (NO). The MAX4502 is normally closed (NC).These CMOS switches can operate continuousl...
Vendor:Other Category:Other
The MAX4501/MAX4502 are single-pole/single-throw(SPST), low-voltage, single-supply, CMOS analog switches. The MAX4501 is normally open (NO). The MAX4502 is normally closed (NC).These CMOS switches can operate continuousl...
Vendor:Other Category:Other
The MAX4493/MAX4494/MAX4495 single/dual/quad general-purpose operational amplifiers are designed for use in systems powered with dual supplies from±2.25V to ±5.5V. The MAX4495 provides a unity-gain bandwidth of 5MHz with...
Mfg:MAXIM Vendor:Other Category:Other
The MAX4493/MAX4494/MAX4495 single/dual/quad general-purpose operational amplifiers are designed for use in systems powered with dual supplies from±2.25V to ±5.5V. These op amps provide a unity-gain bandwidth of 5MHz wit...
Vendor:Other Category:Other
The MAX4493/MAX4494/MAX4495 single/dual/quad general-purpose operational amplifiers are designed for use in systems powered with dual supplies from±2.25V to ±5.5V. The MAX4493 provide a unity-gain bandwidth of 5MHz with ...
Vendor:Other Category:Other
The MAX4491AKA+ is a kind of dual low-cost CMOS op amp. It is availabel in 8 SOT23-8 package. Specifications for all parts are guaranteed over the automotive (-40 to +125) temperature range. It is widely used in battery-...
Mfg:MAXIM Pack: SOT D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC OPAMP HI/SLEW R/R I/O SOT23-5The MAX4490AUK-T single/dual/quad,low-cost CMOS op amps feature Rail-to-Rail® input andoutput capability from either a single +2.7V to+5.5Vsupply or dual ±1.35V to ±2.75V supplies. The MAX4490AUK-T is a high slew ra...
Vendor:Other Category:Other
The MAX4475MAX4478/MAX4488/MAX4489 wide-band, low-noise, low-distortion operational amplifiers offer Rail-to-Rail® outputs and single-supply operation down to 2.7V. They draw 2.2mA of quiescent supply current per amp...
Vendor:Other Category:Other
The MAX4475MAX4478/MAX4488/MAX4489 wide-band, low-noise, low-distortion operational amplifiers offer Rail-to-Rail® outputs and single-supply operation down to 2.7V. They draw 2.2mA of quiescent supply current per amp...
Vendor:Other Category:Other
The MAX4484/MAX4486/MAX4487 single/dual/quad low-cost general-purpose op amps operate from a sin-gle +2.7V to +5.5V supply. The op amps are unity-gainstable with a 7MHz gain-bandwidth product, capable ofdriving an extern...
Vendor:Other Category:Other
The MAX4484/MAX4486/MAX4487 single/dual/quad low-cost general-purpose op amps operate from a sin-gle +2.7V to +5.5V supply. The op amps are unity-gainstable with a 7MHz gain-bandwidth product, capable ofdriving an extern...
Vendor:Other Category:Other
The MAX4484/MAX4486/MAX4487 single/dual/quad low-cost general-purpose op amps operate from a sin-gle +2.7V to +5.5V supply. The op amps are unity-gainstable with a 7MHz gain-bandwidth product, capable ofdriving an extern...
Vendor:Other Category:Other
The MAX4480MAX4483 low-cost, general-purpose op amps offer Rail-to-Rail® outputs, draw only 50A of quiescent current, and operate from a single +2.5V to +5.5V supply. For additional power conservation, the MAX4481 of...
Vendor:Other Category:Other
The MAX4480MAX4483 low-cost, general-purpose op amps offer Rail-to-Rail® outputs, draw only 50A of quiescent current, and operate from a single +2.5V to +5.5V supply. For additional power conservation, the MAX4481 of...
Mfg:MAX Pack:SOP Vendor:Other Category:Other
The MAX448 is high speed general purpose monolithic operational amplifiers in a single, dual or quad package, that are useful for signal frequencies extending into the video range. These MAX448 function in gain configura...
Vendor:Other Category:Other
The MAX4475MAX4478/MAX4488/MAX4489 wide-band, low-noise, low-distortion operational amplifiers offer Rail-to-Rail® outputs and single-supply operation down to 2.7V. They draw 2.2mA of quiescent supply current per amp...
Mfg:MAX Pack:SMD-8 Vendor:Other Category:Other
The MAX4477 wide-band, low-noise, low-distortion operational amplifiers offer Rail-to-Rail® outputs and single-supply operation down to 2.7V. They draw 2.2mA of quiescent supply current per amplifier while featuring ...
Vendor:Other Category:Other
The MAX4476 wide-band, low-noise, low-distortion operational amplifiers offer Rail-to-Rail® outputs and single-supply operation down to 2.7V. They draw 2.2mA of quiescent supply current per amplifier while featuring ...
Vendor:Other Category:Other
The MAX4475MAX4478/MAX4488/MAX4489 wide-band, low-noise, low-distortion operational amplifiers offer Rail-to-Rail® outputs and single-supply operation down to 2.7V. They draw 2.2mA of quiescent supply current per amp...
Vendor:Other Category:Other
The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current. The MAX4470 family feature ground-sensing inputs and Rail-to-Rai...
Mfg:MAX Pack:SMD D/C:O1/O2 Vendor:Other Category:Other
The MAX4473 PA power control IC is intended for closed-loop bias control of GSM power amplifiers. The device facilitates accurate control of the current delivered to the power amplifier (PA) via a control voltage. The er...
Vendor:Other Category:Other
The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current. The MAX4470 family feature ground-sensing inputs and Rail-to-Rai...
Vendor:Other Category:Other
The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current. The MAX4470 family feature ground-sensing inputs and Rail-to-Rai...
Vendor:Other Category:Other
The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current. The MAX4470 family feature ground-sensing inputs and Rail-to-Rai...
Vendor:Other Category:Other
The MAX4465MAX4469 are micropower op amps optimized for use as microphone preamplifiers. They provide the ideal combination of an optimized gain bandwidth product vs. supply current, and low voltage operation in ultra-sm...
Vendor:Other Category:Other
The MAX4465MAX4469 are micropower op amps optimized for use as microphone preamplifiers. They provide the ideal combination of an optimized gain bandwidth product vs. supply current, and low voltage operation in ultra-sm...
Vendor:Other Category:Other
The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current. The MAX4470 family feature ground-sensing inputs and Rail-to-Rai...
Vendor:Other Category:Other
The MAX4460/MAX4461/MAX4462 are instrumentation amplifiers with precision specifications, low-power consumption, and excellent gain-bandwidth product. Proprietary design techniques allow ground-sensing capability combine...
Vendor:Other Category:Other
The MAX4460/MAX4461/MAX4462 are instrumentation amplifiers with precision specifications, low-power consumption, and excellent gain-bandwidth product. Proprietary design techniques allow ground-sensing capability combine...
Vendor:Other Category:Other
The MAX4460/MAX4461/MAX4462 are instrumentation amplifiers with precision specifications, low-power consumption, and excellent gain-bandwidth product. Proprietary design techniques allow ground-sensing capability combine...
Mfg:MAXIM Pack:PLCC Vendor:Other Category:Other
The MAX4456CQH low-cost video crosspoint switches are designed to reduce component count, board space, design time, and system cost. Each contains a matrix of T-switches that connect any of their four (MAX4359) or eight ...
Vendor:Other Category:Other
The MAX4359/MAX4360/MAX4456 low-cost video cross point switches are designed to reduce component count, board space, design time, and system cost. Each contains a matrix of T-switches that connect any of their four (MAX4...
Vendor:Other Category:Other
The MAX4455 is an eight-channel arbitrary graphics on-screen display (OSD) video generator that inserts arbitrary gray-scale bit-mapped graphics into eight asynchronous composite video sources. Ideal for security camera ...
Vendor:Other Category:Other
The MAX4452/MAX4352 single, MAX4453/MAX4353 dual, and MAX4454/MAX4354 quad amplifiers combine higspeed performance with ultra-low power consumption. The MAX4452/MAX4453/MAX4454 are unitygain stable and achieve a -3dB...
Vendor:Other Category:Other
The MAX4452/MAX4352 single, MAX4453/MAX4353 dual, and MAX4454/MAX4354 quad amplifiers combine higspeed performance with ultra-low power consumption. The MAX4452/MAX4453/MAX4454 are unitygain stable and achieve a -3dB...
Vendor:Other Category:Other
The MAX4452/MAX4352 single, MAX4453/MAX4353 dual, and MAX4454/MAX4354 quad amplifiers combine higspeed performance with ultra-low power consumption. The MAX4452/MAX4453/MAX4454 are unitygain stable and achieve a -3dB...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC OPAMP 210MHZ R-TO-R 8-SOICThe MAX4451ESA is one member of the MAX4451 series.It has the following features including (1)ultra-small SC70-5, SOT23-5, and SOT23-8 packages,(2)single +4.5V to +11V operation,(3)input common-mode range extends beyond ...
Vendor:Other Category:Other
The MAX4450 single and MAX4451 dual op amps are unity-gain-stable devices that combine high-speed performance with Rail-to-Rail® outputs. Both devices operate from a +4.5V to +11V single supply or from ±2.25V to ±5.5...
Vendor:Other Category:Other
The MAX4450 single and MAX4451 dual op amps are unity-gain-stable devices that combine high-speed performance with Rail-to-Rail® outputs. Both devices operate from a +4.5V to +11V single supply or from ±2.25V to ±5.5...
Vendor:Other Category:Other
The MAX445 is a high-performance, monolithic, variablegain transconductance amplifier with a high-voltage open-collector output capable of directly driving a video display (CRT cathode). A 2.5ns rise time is achieved usi...
Vendor:Other Category:Other
The MAX4447/MAX4448/MAX4449 single-ended-todifferential line drivers are designed for high-speed communications. Using current feedback for greater bandwidth, these devices deliver full-power bandwidths up to 405MHz and ...
Vendor:Other Category:Other
The MAX4447/MAX4448/MAX4449 single-ended-todifferential line drivers are designed for high-speed communications. Using current feedback for greater bandwidth, these devices deliver full-power bandwidths up to 405MHz and ...
Vendor:Other Category:Other
The MAX4447ESE is one member of the MAX4447 family which is designed as the 6500V/s, wideband, high-output-current, single-ended-to-differential line drivers with enable that can be used in (1)differential line driver; (...
Vendor:Other Category:Other
The MAX4447/MAX4448/MAX4449 single-ended-todifferential line drivers are designed for high-speed communications. Using current feedback for greater bandwidth, these devices deliver full-power bandwidths up to 405MHz and ...
Vendor:Other Category:Other
The MAX4444/MAX4445 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op amp instrumentation amplifier architecture, these ICs have symmetrical differential inputs and a...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC RCVR DIFF-LINE 400MHZ 16-SOICThe MAX4444ESE is one member of the MAX4444 family which is designed as the ultra-high-speed, low-distortion, differentialto-single-ended line receiver that can be used in (1)differential-to-single-ended conversion; (2)t...
Vendor:Other Category:Other
The MAX4444/MAX4445 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op amp instrumentation amplifier architecture, these ICs have symmetrical differential inputs and a...
Vendor:Other Category:Other
The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 16- bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434/MAX4436 are compensated for unity-gain...
Vendor:Other Category:Other
The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 16- bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434/MAX4436 are compensated for unity-gain...
Vendor:Other Category:Other
The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 16- bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434/MAX4436 are compensated for unity-gain...
Mfg:MAXIM Pack: SOT D/C:8 Vendor:Other Category:Other
The MAX4434EUK-T dual operational amplifiers feature wide bandwidth, 16-bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434EUK-T is compensated for unity-gain stability and have a small-signal ...
Vendor:Other Category:Other
The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 16- bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434/MAX4436 are compensated for unity-gain...
Mfg:MAXIM Pack: SOT D/C:8 Vendor:Other Category:Other
The MAX4430EUK-T single and MAX4432/MAX4433 dual operational amplifiers feature wide bandwidth, 16-bit settling times in 37ns, and low-noise/low-distortion operation. The MAX4430EUK-T is compensated for unity gain stabil...
Vendor:Other Category:Other
The MAX4426 are dual monolithic MOSFET drivers designed to translate TTL/CMOS inputs to high voltage/current outputs The MAX4426 is a dual inverting power MOSFET driver The MAX4427 is a dual noninverting power MOSFET dri...
Vendor:Other Category:Other
The MAX442_1281508 combines a 140MHz video amplifier with a high-speed, 2-channel multiplexer in an 8-pin package.With its 36ns switching time and low differential gain (0.07%) and phase (0.09°) errors, it is ideal for b...
Vendor:Other Category:Other
The MAX4414MAX4419 operational amplifiers combine high-speed performance, low distortion, and ultralow supply current. Consuming just 1.6mA of supply current per amplifier, these devices operate from a single +2.7V to +5...
Vendor:Other Category:Other
The MAX4418 operational amplifiers combine high-speed performance, low distortion, and ultralow supply current. Consuming just 1.6mA of supply current per amplifier, the MAX4418 operate from a single +2.7V to +5.5V suppl...
Vendor:Other Category:Other
The MAX4417 operational amplifiers combine high-speed performance, low distortion, and ultralow supply current. Consuming just 1.6mA of supply current per amplifier, the MAX4417 operate from a single +2.7V to +5.5V suppl...
Mfg:MAX Pack:SMD-8 Vendor:Other Category:Other
The MAX4416 operational amplifiers combine high-speed performance, low distortion, and ultralow supply current. Consuming just 1.6mA of supply current per amplifier, the MAX4416operate from a single +2.7V to +5.5V supply...
Vendor:Other Category:Other
The MAX4415 operational amplifiers combine high-speed performance, low distortion, and ultralow supply current. Consuming just 1.6mA of supply current per amplifier, these devices operate from a single +2.7V to +5.5V sup...
Vendor:Other Category:Other
The MAX4414MAX4419 operational amplifiers combine high-speed performance, low distortion, and ultralow supply current. Consuming just 1.6mA of supply current per amplifier, these devices operate from a single +2.7V to +5...
Vendor:Other Category:Other
The MAX4412 single and MAX4413 dual operational amplifiers are unity-gain-stable devices that combine high-speed performance, low supply current, and ultra-small packaging. Both devices operate from a single +2.7V to +5...
Vendor:Other Category:Other
The MAX4412 single and MAX4413 dual operational amplifiers are unity-gain-stable devices that combine high-speed performance, low supply current, and ultra-small packaging. Both devices operate from a single +2.7V to +5...
Vendor:Other Category:Other
The MAX4411 fixed-gain, stereo headphone amplifier is designed for portable equipment where board space is at a premium. The MAX4411 uses a unique, patented DirectDrive architecture to produce a ground-refer- enced outpu...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.