MAX450CJD

Operating Supply Voltage :
Mounting Style :
Package / Case :
Output Current :
Maximum Operating Temperature :
Packaging :
Number of Channels : 1
Shutdown : No
Common Mode Rejection Ratio (Min) : 50 dB
Slew Rate : 100 V/us
Input Offset Voltage : 30 mV
Input Bias Current (Max) : 0.0004 uA


Description

The MAX450CJD video amplifier is designed to buffer and amplifysignals from DC through 10MHz.This monolithic CMOS amplifier has a high impedance CMOS input,while the output can drive 75 ohm loads to greater than ±2V output swing.

Features of the MAX450CJD are:(1)10MHz power bandwith;(2)±4.0V output swing into back terminated 75 coax(RL=150);(3)0.1dB differential phase;(4)400pA (typical) input bias current;(5)100V/s slew rate;(6)53dB gain at 300kHz;(7)output is short circuit protected;(8)5pA/Hz current noise.

The absolute maximum ratings of the MAX450CJD can be summarized as:(1):the parameter is V+-V-,pin 3 connected to pin 5,the rating is +26.4,the unit is V;(2):the parameter is V+-V-,1k between pin 3 and pin 5,the rating is +36,the unit is V;(3):the parameter is +IN,-IN,the rating is (V++0.3V) to (V--0.3V),the unit is V;(4):the parameter is short circuit duration,VOUT,the rating is continuous with V+,V-=±12,the unit is V; (5):the parameter is power dissipation at +25 plastic package (derate 10mW/ above 25),the rating is 1250,the unit is mW;(6):the parameter is power dissipation at +25 CERDIP package (derate 9.5mW/ above 25),the rating is 1190,the unit is mW;(7):the parameter is storage temperature,the rating is -65 to +160,the unit is .