Features: ·±15kV ESD Protection on D+ and D-
·USB 1.1 and USB 2.0 (Low-Speed and Full-Speed)-Compliant Transceivers
·Combined VP and VM Inputs/Outputs
·+1.65V to +3.6V VL Logic Supply Input for Interfacing with Low-Voltage ASICs
·Enumerate Input Function (MAX3453E/MAX3454E)
·Powered from Li+ Battery as Low as +3.1V (MAX3454E/MAX3456E)
·VBUS Detection (MAX3453E/MAX3455E)
·Internal Pullup Resistor (MAX3453E/MAX3454E)
·No Power-Supply Sequencing RequiredApplication·PDAs
·PC Peripherals
·Cellular Telephones
·Data Cradles
·MP3 PlayersSpecificationsVBUS, VL, D+, D- to GND......................................-0.3V to +6.0V
VTRM to GND ..........................................-0.3V to (VBUS + 0.3V)
VP, VM, SUS, ENUM, SPD,
RCV, OE, BD to GND ...................................-0.3V to (VL + 0.3V)
Current (into any pin) ...................................................±15mA
Short-Circuit Current (D+ and D-)................................±150mA
Continuous Power Dissipation (TA = +70°C)
14-Pin TSSOP (derate 9.1mW/°C above +70°C) .........727mW
16-Pin Thin QFN (derate 14.7mW/°C above +70°C)...1176mW
Operating Temperature Range ........................-40°C to +85°C
Junction Temperature.....................................................+150°C
Storage Temperature Range ..........................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
DescriptionThe MAX3453EMAX3456E ±15kV ESD-protected USBcompliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds. The MAX3453EMAX3456E operate with VL as low as +1.65V, ensuring compatibility with low-voltage ASICs.
The MAX3453EMAX3456E feature a logic-selectable suspend mode that reduces current consumption to less than 40A. Integrated ±15kV ESD protection protects the USB D+ and D- bidirectional bus connections.
The MAX3453E supports only full-speed (12Mbps) operation. The MAX3453E/MAX3454E feature an internal 1.5k USB pullup resistor and an enumeration function that allows devices to logically disconnect while plugged in. The MAX3453E/MAX3455E provide a pushpull bus-detect (BD) output that asserts high when VBUS > +4.0V.
The MAX3453EMAX3456E operate over the extended temperature range (-40°C to +85°C) and are available in 14-pin TSSOP and 16-pin (3mm x 3mm) thin QFN packages.
MAX3453E Data Sheet
