Features: · ±15kV ESD Protection on D+ and D-· Combined VP and VM Inputs/Outputs· +1.65V to +3.6V VL Logic Supply Input for Interfacing with Low-Voltage ASICs· Enumerate Input Function (MAX3451E)· Powered from Li+ Battery as Low as +3.1V (MAX3450E and MAX3451E)· VBUS Detection (MAX3452E)· Pin Comp...
MAX3452E: Features: · ±15kV ESD Protection on D+ and D-· Combined VP and VM Inputs/Outputs· +1.65V to +3.6V VL Logic Supply Input for Interfacing with Low-Voltage ASICs· Enumerate Input Function (MAX3451E)· P...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
VBUS, VL, D+, D- to GND........................................-0.3V to +6.0V
VTRM to GND ............................................-0.3V to (VBUS + 0.3V)
VP, VM, SUS, SPD, ENUM,
RCV, OE, BD to GND .....................................-0.3V to (VL + 0.3V)
Current (into any pin) .....................................................±15mA
Short-Circuit Current (D+ and D-)..................................±150mA
Continuous Power Dissipation (TA = +70°C)
14-Pin TSSOP
(derate 9.1mW/°C above +70°C).................................727mW
16-Pin Thin QFN 3mm x 3mm
(derate 14.7mW/°C above +70°C).............................1176mW
Operating Temperature Range .......................-40°C to +85°C
Junction Temperature....................................................+150°C
Storage Temperature Range .........................-65°C to +150°C
Lead Temperature (soldering, 10s) ...............................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
The MAX3450E/MAX3451E/MAX3452E USB-compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds. The MAX3450E/MAX3451E/ MAX3452E operate with VL as low as +1.65V, ensuring compatibility with low-voltage ASICs.
The MAX3450E/MAX3451E/MAX3452E feature a logicselectable suspend mode that reduces current consumption to less than 40µA. Integrated ±15kV ESD protection protects the USB D+ and D- bidirectional bus connections. The MAX3450E is pin compatible with Micrel's MIC2550A. The MAX3451E features an internal 1.5kΩ USB pullup resistor and an enumeration function that allows devices to logically disconnect while plugged in. The MAX3452E provides a push-pull busdetect (BD) output that asserts high when VBUS is greater than +4.0V.
The MAX3450E/MAX3451E/MAX3452E operate over the -40°C to +85°C extended temperature range and are available in 14-pin TSSOP and 3mm x 3mm 16-pin thin QFN packages.