© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
MAZ4000 specifications:
Parameter
Symbol
Rating
Unit
Average forward current
IF(AV)
250
mA
Repetitive peak forward current
IFRM
250
mA
Total power dissipation*1
Ptot
3...
Mfg:Panasonic Pack:SOT346 D/C:05+ Vendor:Other Category:Other
Mfg:Panasonic Pack:SOT346 D/C:05+ Vendor:Other Category:Other
Vendor:Other Category:Other
The MAZ30560M is designed as one kind of silicon planar type that can be used in stabilization of power supply applications. Features of the MAZ30560M are:(1)Mini type 3-pin package (Mini3-G1); (2)Allowing to achieve a h...
Vendor:Other Category:Other
Mfg:PANASONIC Pack:SOT-23 D/C:2008+ Vendor:Other Category:Other
Mfg:Panasonic Pack:SOT23 Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:Panasonic Pack:SOT346 D/C:05+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:PANASONIC Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:MAXIM Pack:LQFP D/C:8 Vendor:Other Category:Other
MAXSMBus is an interface between an IBM-compatible PC and System Management Bus (SMBus™)-compatible serial-interface devices such as temperature monitors, voltage regulators, or A/D converters (ADCs). The MAXSMBus ...
Vendor:Other Category:Other
The MAXQ8913 is designed as one kind of 16-bit, mixed-signal microcontroller device that can be used in (1)digital camera and cell phone optical image; (2)stabilization; (3)servo loop control; (4)tone generation with spe...
Vendor:Other Category:Other
The MAXQ7666 is designed as one kind of 16-Bit, RISC, microcontroller-based, smart data-acquisition system device that can be used in (1)Automotive Steering Sensors; (2)CAN- and LIN-Based Automotive Sensors; (3)Industria...
Vendor:Other Category:Other
The MAXQ61C is designed as one kind of 16-bit microcontroller device that can be used in (1)remote controls; (2)battery-powered portable equipment; (3)consumer electronics; (4)home appliances; (5)white goods applications...
Vendor:Other Category:Other
The MAXQ613 is designed as one kind of 16-bit microcontroller device that can be used in (1)remote controls; (2)battery-powered portable equipment; (3)consumer electronics; (4)home appliances; (5)white goods applications...
Vendor:Other Category:Other
The MAXQ612 is designed as one kind of 16-bit microcontroller device that can be used in (1)remote controls; (2)battery-powered portable equipment; (3)consumer electronics; (4)home appliances; (5)white goods applications...
Vendor:Other Category:Other
The MAXQ610-KIT is designed as one kind of evaluation kit device that includes the MAXQ610 EV kit board, which contains infrared (IR) transmit and receive devices, two RS-232 serial channels, four 8-pin headers providing...
Vendor:Other Category:Other
The MAXQ610 is designed as one kind of 16-bit microcontroller device that can be used in (1)remote controls; (2)battery-powered portable equipment; (3)consumer electronics; (4)home appliances; (5)white goods applications...
Vendor:Other Category:Other
The MAXQ3120 microcontroller is a high-performance,16-bit microcontroller that incorporates dual, true-differential,16-bit sigma-delta analog-to-digital converters (ADCs), a liquid-crystal display (LCD) interface that ca...
Vendor:Other Category:Other
MAXQ2010 is designed as one kind of 16-bit mixed-signal microcontroller device that can be used in (1)home appliances; (2)consumer electronics; (3)thermostats/humidity; (4)sensors; (5)security sensors; (6)gas and chemica...
Vendor:Other Category:Other
The MAXQ2000 microcontroller is a low-power, 16-bit device that incorporates a liquid-crystal display (LCD) interface that can drive up to 100 (-RBX) or 132 (-RAX) segments. The MAXQ2000 is uniquely suited for the blood-...
Vendor:Other Category:Other
The MAXQ1850 is designed as one kind of secure cryptographic controller device that can be used in (1)electronic commerce; (2)EMV banking; (3)secure access control; (4)secure data storage; (5)pay-per-play; (6)certificate...
Vendor:Other Category:Other
The MAXQ1103 is designed as one kind of high-performance secure RISC microcontroller device that can be used in (1)Electronic Commerce; (2)PCI Terminals; (3)PIN Pads; (4)ATM Keyboards; (5)EMV. Banking; (6)Secure Access C...
Vendor:Other Category:Other
The MAXQ1010 is designed as one kind of security token microcontroller device that can be used in (1)one-time password generator; (2)USB card readers applications. And this device also contains a hardware DES engine and ...
Vendor:Other Category:Other
The MAXC001 is designed as the stereo 3W audio power amplifier that can be used in (1)notebooks; (2)portable DVD players; (3)tablet PCs; (4)PC audio peripherals; (5)camcorders. This device can deliver up to 200mW of cont...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The MAX9996 high-linearity downconversion mixer provides 8.3dB gain, +26.5dBm IIP3, and 9.7dB NF for 1700MHz to 2200MHz UMTS/WCDMA, DCS, and PCS base-station receiver applications. With a 1900MHz to 2400MHz LO requency ...
Vendor:Other Category:Other
The MAX9995 dual, high-linearity, downconversion mixer provides 6.1dB gain, +25.6dBm IIP3, and 9.8dB NF for UMTS/WCDMA, DCS, and PCS base-station applications. The MAX9995 is ideal for low-side LO injection. (For a mixer...
Vendor:Other Category:Other
The MAX9994 high-linearity downconversion mixer provides 8.3dB gain, +26.2dBm IIP3, and 9.7dB NF for 1700MHz to 2200MHz UMTS/WCDMA, DCS, and PCS base-station receiver applications. With a 1400MHz to 2000MHz LO frequency ...
Vendor:Other Category:Other
The MAX9993 high-linearity down-conversion mixer provides 8.5dB of gain, +23.5dBm IIP3, and 9.5dB NF for UMTS, DCS, and PCS base-station applications. The MAX9993 integrates baluns in the RF and LO ports, a dual-input LO...
Vendor:Other Category:Other
The MAX9989/MAX9990 evaluation kits (EV kits) simplify the evaluation of the MAX9989/MAX9990 LO buffers.They are fully assembled and tested at the factory.Standard 50 SMA connectors are included for the input and both ou...
Vendor:Other Category:Other
The MAX961MAX964/MAX997/MAX999 are low-power, ultra-high-speed comparators with internal hysteresis. These devices are optimized for single +3V or +5V operation. The input common-mode range extends 100mV Beyond-the-Rails...
Vendor:Other Category:Other
The MAX9989/MAX9990 evaluation kits (EV kits) simplify the evaluation of the MAX9989/MAX9990 LO buffers.They are fully assembled and tested at the factory.Standard 50 SMA connectors are included for the input and both ou...
Vendor:Other Category:Other
The MAX9987/MAX9988 evaluation kits (EV kits) simplify the evaluation of the MAX9987/MAX9988 LO buffers/splitters. They are fully assembled and tested at the factory. Standard 50 SMA connectors are included on the EV kit...
Vendor:Other Category:Other
The MAX9987/MAX9988 evaluation kits (EV kits) simplify the evaluation of the MAX9987/MAX9988 LO buffers/splitters. They are fully assembled and tested at the factory. Standard 50 SMA connectors are included on the EV kit...
Vendor:Other Category:Other
The MAX9986 evaluation kit (EV kit) simplifies the evaluation of the MAX9986 815MHz to 995MHz base-station downconversion mixer. It is fully assembled and tested at the factory. Standard 50 SMA connectors are included on...
Vendor:Other Category:Other
The MAX9984 evaluation kit (EV kit) simplifies the evaluation of the MAX9984 GSM, WCDMA, and WiMAX base-station downconversion mixer. It is fully assembled and tested at the factory. Standard 50 SMA connectors are includ...
Mfg:MAX D/C:O1/O2 Vendor:Other Category:Other
The MAX9982 fully integrated SiGe mixer is optimized to meet the demanding requirements of GSM850, GSM900, and CDMA850 base-station receivers. Each high-linearity device includes a local oscillator (LO) switch, LO driver...
Vendor:Other Category:Other
The MAX9981 evaluation kit (EV kit) simplifies the evaluation of the MAX9981 825MHz to 915MHz dual high-linearity active down-converter mixer. It is fully assembled and tested at the factory. Standard 50 SMA connectors a...
Mfg:MAXIM Pack:SMD Vendor:Other Category:Other
The MAX976/MAX978/MAX998 dual/quad/single, highspeed, low-power comparators are optimized for +3V/+5V single-supply applications. They achieve a 20ns propagation delay while consuming only 225A supply current per compara...
Vendor:Other Category:Other
The MAX961MAX964/MAX997/MAX999 are low-power, ultra-high-speed comparators with internal hysteresis. These devices are optimized for single +3V or +5V operation. The input common-mode range extends 100mV Beyond-the-Rails...
Vendor:Other Category:Other
The MAX9967 dual, low-power, high-speed, pin electronics driver/comparator/load (DCL) IC includes, for each channel, a three-level pin driver, a dual comparator, variable clamps, and an active load. The driver MAX9967 fe...
Vendor:Other Category:Other
The MAX9965/MAX9966 four-channel, low-power, highspeed pin electronics driver and comparator ICs include for each channel a three-level pin driver, comparator,and variable clamps. The MAX9965/MAX9966 are similar to the M...
Vendor:Other Category:Other
The MAX9965/MAX9966 four-channel, low-power, highspeed pin electronics driver and comparator ICs include for each channel a three-level pin driver, comparator,and variable clamps. The MAX9965/MAX9966 are similar to the M...
Vendor:Other Category:Other
The MAX9963/MAX9964 four-channel, low-power, highspeed pin electronics driver and comparator ICs include, for each channel, a three-level pin driver, a dual comparator, and variable clamps. The driver MAX9964 features a ...
Vendor:Other Category:Other
The MAX9963/MAX9964 four-channel, low-power, highspeed pin electronics driver and comparator ICs include, for each channel, a three-level pin driver, a dual comparator, and variable clamps. The driver MAX9963 features a ...
Vendor:Other Category:Other
The MAX9960 dual-flash-pin electronics/supervoltage switch matrix replaces most of the relays and switches commonly needed to connect system resources to each of two pins in a flash memory or SOC ATE system (Figure 1). T...
Mfg:MAX Pack:SOP14 D/C:04+ Vendor:Other Category:Other
The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail® inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making the...
Vendor:Other Category:Other
The MAX9951/MAX9952 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instru...
Vendor:Other Category:Other
The MAX9951/MAX9952 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instru...
Vendor:Other Category:Other
The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail® inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making the...
Vendor:Other Category:Other
The MAX9940 is designed as one kind of signal-line overvoltage protector device that can be used in (1)notebook computers; (2)portable devices; (3)industrial equipment applications. And this device is especially useful f...
Vendor:Other Category:Other
The MAX985/MAX986/MAX989/MAX990/MAX993/ MAX994 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail® inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making th...
Vendor:Other Category:Other
The MAX9938 high-side current-sense amplifier offers precision accuracy specifications of VOS less than 500V (max) and gain error less than 0.5% (max).Quiescent supply current is an ultra-low 1A. The MAX9938 fits in a ti...
Vendor:Other Category:Other
The MAX985/MAX986/MAX989/MAX990/MAX993/ MAX994 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail® inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making th...
Vendor:Other Category:Other
The MAX9924 variable reluctance (VR or magnetic coil) sensor interface devices are ideal for position and speed sensing for automotive crankshafts, camshafts, transmission shafts, etc. These MAX9924 integrate a precision...
Vendor:Other Category:Other
This device supplies and monitors the current drawn by two Hall-effect sensors, filters the sensed current level, and outputs the corresponding logic level. The MAX9921 includes input diagnostics and fault protection. Th...
Vendor:Other Category:Other
The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail® inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making the...
Vendor:Other Category:Other
The single MAX9914/MAX9915 and dual MAX9916/MAX9917 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered applications such as portable instrumentation,porta...
Vendor:Other Category:Other
The single MAX9914/MAX9915 and dual MAX9916/MAX9917 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered applications such as portable instrumentation,porta...
Vendor:Other Category:Other
The single MAX9914/MAX9915 and dual MAX9916/MAX9917 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered applications such as portable instrumentation,porta...
Vendor:Other Category:Other
The single MAX9914/MAX9915 and dual MAX9916/MAX9917 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered applications such as portable instrumentation,porta...
Vendor:Other Category:Other
The single MAX9910/MAX9911 and dual MAX9912/MAX9913 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current and are ideal for battery-powered applications such as portable ins...
Vendor:Other Category:Other
The single MAX9910/MAX9911 and dual MAX9912/MAX9913 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current and are ideal for battery-powered applications such as portable ins...
Vendor:Other Category:Other
The single MAX9910/MAX9911 and dual MAX9912/MAX9913 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current and are ideal for battery-powered applications such as portable ins...
Vendor:Other Category:Other
The single MAX9910/MAX9911 and dual MAX9912/MAX9913 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current and are ideal for battery-powered applications such as portable ins...
Mfg:MAXIM Pack:SMD D/C:06+ Vendor:Other Category:Other
The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail® inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making the...
Vendor:Other Category:Other
The MAX985/MAX986/MAX989/MAX990/MAX993/ MAX994 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail® inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making th...
Vendor:Other Category:Other
The MAX9892 features two low-impedance analog switches controlled by MUTE that opens and closes the switches. The switches are open during normal operation and have no impact on the output signal. During startup and shut...
Vendor:Other Category:Other
The MAX9890 provides click-and-pop suppression for devices such as CODECs with integrated headphone amplifiers that lack a clickless/popless startup/power-up or shutdown/power down. The device controls the ramping of the...
Mfg:MAXIM Pack:N/A D/C:09+ Vendor:Other Category:Other
The MAX985/MAX986/MAX989/MAX990/MAX993/ MAX994 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail®inputs and outputs. Their operating voltages range from 2.5V to 5.5V, making them ...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.