Features: ` 200kHz GBW
` Ultra-Low 4A Supply Current
` Single 1.8V to 5.5V Supply Voltage Range
` Ultra-Low 1pA Input Bias Current
` Rail-to-Rail Input and Output Voltage Ranges
` Low ±200V Input Offset Voltage
` Low 0.001A Shutdown Current
` High-Impedance Output During Shutdown (MAX9911/MAX9913)
` Unity-Gain Stable
` Available in Tiny SC70, SOT23, and MAX PackagesApplicationPortable Medical Devices
Portable Test Equipment
Laptops
Data-Acquisition EquipmentPinout
SpecificationsPower-Supply Voltage (VDD to VSS) ....................-0.3V to +6.0V
IN_+, IN_-, OUT_, SHDN_............... (VSS - 0.3V) to (VDD + 0.3V)
Current into IN_+, IN_- ..................................................±20mA
Output Short-Circuit Duration to VDD or VSS..............Continuous
Continuous Power Dissipation (TA = +70°C)
5-Pin SC70 (derate 3.1mW/°C above +70°C)............. 247mW
6-Pin SC70 (derate 3.1mW/°C above +70°C)............. 245mW
8-Pin SOT23 (derate 9.1mW/°C above +70°C)........... 727mW
10-Pin MAX (derate 5.6mW/°C above +70°C) ...........444mW
Operating Temperature Range ...................... -40°C to +85°C
Junction Temperature ...................................................+150°C
Storage Temperature Range .........................-65°C to +150°C
Lead Temperature (soldering, 10s) .............................. +300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
DescriptionThe single MAX9910/MAX9911 and dual MAX9912/MAX9913 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current and are ideal for battery-powered applications such as portable instrumentation, portable medical equipment, and wireless handsets. These CMOS op amps feature an ultra-low input-bias current of 1pA, railto-rail inputs and outputs, low supply current of 4A,and operate from a single 1.8V to 5.5V supply. For additional power conservation, the MAX9911/MAX9913 feature a low-power shutdown mode that reduces supply current to 1nA, and puts the amplifiers' outputs in a high-impedance state. These MAX9910 are unity-gain stable with a 200kHz GBW product.
The MAX9910/MAX9911 are available in 5-pin and 6-pin SC70 packages, respectively. The MAX9912 is available in an 8-pin SOT23 package, and the MAX9913 is available in a 10-pin MAX® package. MAX9910 are specified over the -40°C to +85°C extended operating temperature range.
MAX9910 Data Sheet
